App store terms 4s, app store terms 4s

I'm going crazy.  I cannot get past the "Accept New Terms" on the Apps store and pressing "send email" does abolsultely nothing, so I cannot download any new apps etc.  What is going on with Apple?  Who tested this stuff?
Any help would really be apprciated. I've tried everything that I know but still keep going through this loop.
Thanks

Goonerrich wrote:
.... I've tried everything that I know ...
Details would be good...
Goonerrich wrote:
... What is going on with Apple?  Who tested this stuff?
Use this Link to send your Feedback to Apple
http://www.apple.com/feedback/

Similar Messages

  • Trying to download an app on my iPhone using the App Store. Thing popped up to accept iTunes terms so it takes me to the page I click accept and it takes me back to the app and it says it will now download. The thing to accept the terms pops up again.

    I was downloading an app on the App Store. I pressed install app and it says I need to accept iTunes terms and conditions. So I click ok and it takes me to the page to accept it. I click accept and it takes me to the page where the app is and a thing pops up saying the app will download now. I click okay and the same iTunes terms and conditions thing comes up again. Over and over I accept the terms but it keeps going back saying the app is going to download but it never does.

    There must be a problem with the app store right now as a number of people seem to be having this problem right now.  Try purchasing it using iTunes on your computer, accept the terms and conditions there, then either sync it to your phone or download it on your phone as a past purchase (http://support.apple.com/kb/HT2519).

  • Can't view terms & conditions in app store when trying to update apps

    When trying to update my apps, I get a notification that says:
    iTunes Terms & Conditions Have Changed
    Before you can proceed you must read & accept the new Terms & Conditions
    I am given the options "Cancel" and "OK". Upon clicking "OK", however, the Terms & Conditions do not show up. Instead, I am just back at the screen that shows my available updates.
    Please note that this issue is different from other issues that say they cannot update apps because of this pop-up; their situation is that the Terms & Conditions show, and they are given an option to accept the Terms & Conditions, but upon doing so and trying to update the apps again, they are prompted with the same message. I am completely unable to view the Terms & Conditions entirely.
    This may or may not have to do with another minor issue I'd been experiencing where certain applications do not allow me to switch to or from the application. For example, whenever I receive a text notification pop-up, clicking "View" or "Reply" will simply close the window but it will remain on the window that I am currently on and will not switch to the text messaging app. This also seems to be the case when a notification occurs in the notification center and upon clicking on the notification, nothing happens. This only happens to select applications, not all of them.
    I am currently running on iOS 6.1.3 on a 16GB iPhone 5 with Verizon Wireless as my provider.

    I agree with you. I have just encountered the exact same problem and it's frustrating. It's a bug.
    Opening iTunes didn't solve the issue in my case.
    Here's a description of the problem and the solution I found:
    Problem
    1. Opened the App store
    2. Logged into my account
    3. Clicked on the download link for the app in question — was presented with the dialogue that I should accept the terms and conditions etc — and pressed OK.
    4. Nothing happens. Repeated step 3 many times but nothing happened.
    Solution
    1. Quit App store
    2. Launch App store again and repeat step 3 above.
    3. The terms and conditions will appear on the screen for you to accept and you can then proceed with your download/purchase.

  • Claims debacle (error) with Term Store: "Could not retrieve a valid windows identity" for all sites in a particular web app.

    When I pull up the Term store in CA or any MySite collection, it works.
    When I do so in any other site collection (HNSCs, incidentally), It doesn't return any term stores.
    My ULS log immediately before and after the "/_vti_bin/taxonomyinternalservice.json/CheckPermission" POST on termstore .aspx triggers the WCF call:
    Claims Authentication af30y Verbose Claims Windows Sign-In: Successfully signed-in the the user 'contoso\domainUser' for request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
    Claims Authentication af30q Verbose Updating header 'LOGON_USER' with value '0#.w|contoso\domainUser' for the request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
    Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|contoso\domainUser, ClaimsCount=77
    Logging Correlation Data xmnv Medium Site=/
    Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://CONTOSOFE3:32843/00e6d55691824965ac223f1d1cfae6d2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:590e916c-c89a-4f89-9819-a82c97fabcaa'
    Claims Authentication bz7l Medium SPSecurityContext: Could not retrieve a valid windows identity for username 'contoso\domainUser' with UPN '[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access the service. at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity) at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid) at SyncInvokeUpnLogon(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..
    Claims Authentication g220 Unexpected No windows identity for contoso\domainUser.
    The "The caller is not authorized to access the service." message seems pertinent.
    Both web apps are using only NTLM auth.
    The url for both web apps ends in the same contoso.com domain. 
    I get the same errors no matter what account I use, including the install account.
    Things I've tried:
    Deleting and building a new HNSC root web app and site. Error happens in all sites in all web apps except the PBSC hosting MySites.
    Giving the root site app pool identity full control of the metadata service app (even though the MySite identitiy doesn't have it)
    Giving the root site app pool identity full permissions on the metadata service app.
    Comparing database and web app config permissions between dev (where everything works perfectly) and prod (where it does not).
    Made sure IIS auth settings on both sites are identical
    Both sites are using the same SSL certificate (though the call to the web service appears to be http)
    Reprovisioned the metadata service app with a new database and new app pool identity.
    Made sure C2WT is running. Tried it with the service stopped as well.
    Web.configs are identical between working and non-working apps.
    I'm stumped but still Googling. I'm hoping to avoid having to call Micrososft. Any help would be appreciated!
    UPDATE:
    Interestingly, when I restored the web application from backup (via CA), I ended up with 3 identical "Windows Authentication" authentication providers assigned to the problem web app. Since there was more than one, I was directed to the provider-chooser
    page when visiting the site. Upon choosing 1 of the 3, I was authenticated, and *poof*, no more authentication errors and the term store loaded term sets as expected.
    Of course, 3 providers was not an ideal state, so I grabbed the one that worked (#1) via get-spauthenticationprovider, and assigned it to the web app via set-spwebapplication, and my problem returned.
    I am currently updating the farm to SP1 from June 2013 CU. Fingers crossed.
    Update:
    The update to SP1 went smoothly, but did not resolve the issue. Also related (I believe) are the random authentication errors when trying to upload images to some libraries, and 401-errors on the accessdenied.aspx page itself.
    Update:
    The problem is resolved, seemingly after making 4 changes. I'm trying to narrow down which change was the cure, if any:
    I installed SP1 on all 6 servers, rebooted and upgraded. This appeared to have no effect.
    Removed an old login from SQL that no longer existed in AD because of this ULS error:
    System.Runtime.InteropServices.COMException: The user or group contoso\svc_xxxxxxxxx' is unknown., StackTrace:    at Microsoft.SharePoint.Utilities.SPUtility.GetFullNameFromLoginEx(String loginName, Boolean&
    bIsDL)
    This login was the identity of the application pool that used to run the web app in question.
    This login was the schema owner of a schema named after itself on every SharePoint database so I changed the schema owner to dbo but left the schema attached.
    The problem may have surfaced initially when the app pool identity was changed in CA, but went unnoticed?
    Note that the web app had been deleted and recreated many times with a new identity and pool to no avail, but the URL remained the same throughout each attempted fix. Relevant?
    Grasping at straws, I changed the app pool identity for this web app to the same one that runs the MySite web app pool as per this only slightly related problem: http://www.planetsharepoint.org/m/preview.php?id=372&rid=34764&author=Vlad+Catrinescu
    I changed the authentication method from NTLM to Negotiate.
    I am rolling back #3 and #4 to see if the issue resurfaces.
    Update:
    It doesn't appear to have been the NTLM/Negotiate setting. Web app is currently set to NTLM and all is well. No strange accessdenies, and term Store is still manageable from all sites.
    Update: Sorry for the delay. I am administering 6 farms these days. Will update as soon as the final phase of rollbacks happens.
    I think I can. I think I can.

    maybe that web app was accidentally created with classic auth?
    here's an example of how to create claims based, with classic, and then "doing 2013" claims
    #Create the example web application, as mentioned above, either with gui, and pick later, or
    New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
    5050
    -databaseName$contentDB-securesocketslayer
    #If doing for 2013
    New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
    5050
    -AuthenticationProvider(new-spauthenticationprovider)
    -databaseName$contentDB-secureSocketsLayer

  • How do I get the terms for genuis to clear out on my iPhone and to return to the app store

    I went tp the app store on my iPhone and tapped on Genius and it asked me to agree are disagree with the terms I tapped agree but it wouldn't take it so I had them send it by email and now when I go to the app store on my iPhone all that pops up is the terms for Genius and I see no way to agree or disagree on my iPhone or in my email.

    jake_hosh wrote:
    Is this because they are not in my iCloud because I didn't buy the books directly from the iBooks store? 
    Yes, it is.

  • Terms & Conditions problem in App Store

    I want to install a free app on my Iphone. But every time that I try, app store show me a message of "Terms & Conditions have changed.." that I should agree. I have agreed around 15 times and I still can't download the app. Can anybody help me?

    I'm using the Guatemala itunes store with a Guatemalan credit card, and i have downloaded about 40 aplications since april 09' and never with a problem, until this monday, that every time i try it shows me that "Terms & Conditions have change"
    Yo estoy en las mismas, y es que ni en la compu me deja bajar ninguna sola aplicacion, ni menos en el iphone.
    Lo raro es que probe bajar una aplicacion gratis en mi ipod touch y si me dejo, y otro cuate con otra cuenta probamos y en la cuenta de él si puede descargar todas las aplicaciones. hay me cuentan si saben algo...

  • Everytime I try to purchase Mountain Lion from the App Store it tells me that iTunes has changed their terms and agreements and I need to first read and agree to them before I can proceed. It never pulls up the terms and agreement window to read?

    Everytime I try to purchase Mountain lion from the App store it tells me that iTunes has changed their terms and agreements, in order to proceed I need to read and agree to them, yet no pop up window appears to do just that!!

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • App store crashes when terms of service is required. And I can't install apps unless I do. How do I fix this?

    I've had this problem before but before I just couldn't open the app store at all. I have restored and updated to iOS 5 to try to fix it but now the app store crashes when I'm about to install an app. When I click install app, it brings me to my home screen and shows it loading. Then it says that there are new iTunes terms and conditions. It has the options cancel and agree but I can't install the app unless I click agree. The problem is, when I click agree it brings me to the app store again but crashes right away. I can't get any apps on my phone. Does anyone know how to help this?

    Forgotten RESTRICTIONS Passcode
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.   
    - If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
    How to reset forgotten Restrictions...: Apple Support Communities
    - How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

  • Unable to accept new App store terms and conditions

    Hello, i just bought a Macbook Air 13" with OS X Yosemite, and I am trying to buy an app from the App store. However, it's asking me to accept the new terms and conditions, but when I click on "accept", nothing else happens, and I am not able to confirm. So every time I try to buy an app it keeps asking the same question. I have tried to disconnect and reconnect my App store account, as well as restarting my Mac, but nothing changes.

    1. Make sure you scroll all the way to the end of the agreement before trying to click Accept.
    2. Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Cookies/com.apple.appstore.cookies
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    3. The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • HT204266 App Store terms endless loop? Anyone else experiencing this?

    Getting a prompt to accept new terms and conditions. Accept the terms, but I try to download an app theT&C agreement and prompt appear again.

    Me as well. Any resolution? Can yanyone get past this? I cannot download anything from the app store. Can anyone?

  • Anyone else having problems with App Store and it asking for you to accept terms and conditions

    Every time I try to use the App Store for updates or to download new apps, it asks me to accept new terms and conditions. I "accept" and it tells me to re-attempt download. When I try to do so! It brings up the box saying I need to accept the new terms and conditions. This loop continues indefinitely on all my Apple products.

    The iTunes and Mac App Store / iCloud problem spontaneously resolved for me as of 21:54 Pacific Standard Time on 9/30/2012.
    Someone at Apple was aware of and fixed the problem. Finally.
    Yeah!

  • I just purchased Mountain Lion on the app store, put in new credit card and agreed to terms then nothing happend. How do I know if I purchased this upgrade?

    I just purchased Mountain Lion on the app store, put in new credit card and agreed to terms then nothing happend. How do I know if I purchased this upgrade?

    Sometimes if you make a purchase for the first time, use a new billing method (ie credit card) or the App Store terms have changed, I've noticed that you need to press the "Buy" button twice for the purchase to actually go through (ie, you press Buy, you agree to the terms, and you have to press Buy again). You won't get double-charged.
    You can check if the purchase is actually downloading by looking in the Purchased tab of the App Store - the Mountain Lion installer will be there if it worked. If not, try the Buy button again.
    Matt

  • App Store upgrade Snow Leopard to Mountain Lion: unable to accept Terms & Conditions

    I was trying to upgrade a Mac from Snow Leopard 10.6.8 (latest) to Mountain Lion via the App Store. When I click "Buy" it pops down an alert reading:
        The iTunes Terms & Conditions have changed. To Proceed, you must read and accept the new terms and conditions.
    So far, so good.. I click "OK" and it brings up the Terms & Conditions document. I check the box "I have read and agree…" and click the Agree button. This sends me right back to the ML purchase page, with the same alert described above popped down again.
    I have only gone through this loop for 3 or 4 cycles, but I assume it is infinite.
    Anyone experienced or heard about this issue, or how to address it?

    zippyapple wrote:
    ...Anyone experienced or heard about this issue, or how to address it?...
    http://www.macrumors.com/2012/09/30/widespread-itunes-and-app-store-terms-and-co nditions-bug-preventing-new-purchases-and-downloads/

  • Ok so heres my question. I don't understand why this sign that say "Terms n Policy of the store have changed!" and it said to go agree the new terms and policy. I did that and it went back to the app store,but then it pops out again! What do i do?!

    Ok I don't understand why this sign that says "Terms and Policy of App store has changed!" So it tells me to go agree the new terms and policy. After i did that it returns to the App Store where i was before. And only like ten to five seconds it appears again! I just dont know what to do! Can anyone help me?!

    Sign out of iTunes and sign back in and try again. The issue is being reported as being solved....
    GB

  • How can i remove the terms and conditions from my app store on iphone 5s ?

    How can i remove the terms and conditions from my app store icon on iphone 5s

    Hello mrh1962,
    Thank you for providing the details of the issue you are experiencing with accepting Terms & Conditions on your iPhone 5s.
    First, I recommend restarting your phone and then resetting if it's still not working:
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If you can access your home screen, I also recommend verifying that cookies are not blocked and private browsing is turned off in Settings>Safari:
    iPhone User Guide - Safari settings
    http://help.apple.com/iphone/7/#/iph3d7aa74dc
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Help needed to create a filter

    Experts, I would like to create a filter to return data corresponding to the last month of the year or the month for which the latest data is available. For example, If the end user selects 2012 from the year prompt (we have a PV associated to it), t

  • Changes to graph sizes and indicator locations do not save.

    I make changes to graph sizes and indicator locations on front panel and save VI but when I recall the VI changes are not saved.

  • F-03 tagging problem

    Hi friends In  T-code f-03  profit center field come through BSIS Table  will it be possible to get this field from table FAGLFLEXA?

  • Mutilple Resultsets

    Connection conn1= DriverManager.getConnection(url, "", ""); Statement stmt1 = conn1.createStatement(); ResultSet rset1 =stmt1.executeQuery("SELECT FOLLOW_UP_TABLE.ACCTNO,ADDRESS_TABLE.P_ID From ADDRESS_TABLE INNER JOIN FOLLOW_UP_TABLE on FOLLOW_UP_TA

  • Photoshop premiere element 7

    I recently bought a canon 550 digital camera and tried to download my video onto permiere element 7 and the message '...codec not installed' pops up. I have installed the latest dng and it works for my photos shot in raw but not for the video. Q: How