Append string in BPEL

Hello,
I have three values coming in the XML elements like
FirstName, LastName and ZipCode
I want to append these 3 using inside BPEL (using BPEL way) and then at the end also append current TimeStamp.
So final appended string will look like FirstNameLastNameZipCodeTimeStamp
How can i go about doing this appending ? also, Do I have to create a holder element that will hold this appended string ?
thx
d

Hi,
Use Concat(), inside Assign activity, give the values like, concat(FirstName,LastName,ZipCode, currectTime), offcourse this FirstName and other values will come from XML elements which you can select in the Expression Builder
concat(bpws:getVariableData('inputVariable','payload','/ns4:FirstName'),bpws:getVariableData('inputVariable','payload','/ns4:LastName'),bpws:getVariableData('inputVariable','payload','/ns4:ZipCodeName'),xp20:current-time())
Next you can create a new Variable and assign this value concat() to it.
-Yatan

Similar Messages

Append string to stringbuffer in same line

I have stringbuffer in which i append string thiesestring is of variable lengt
has different value .I want that when i append string to stringbuffer it append
to same line .I use append method of stringbuffer.But the whole value is not
in same line it breaks into many line all lines are not of same size.
Thanks

Try making the textarea larger and see if it still
shows on a new line...Textarea width is very large .There are many line break sometimes all lines
are of different length so there is no issue of word wrap .I check the output
sometimes it gives newline when it encounter space but not always .there are also spaces in single line .Sometimes it gives new line when it encounter >
and sometimes it continue in same line after enconter > .
Thanks

Get HTML page content as string in BPEL

Hi!
I would like to get HTML page content as string in BPEL via partnerLink.
So, I define WSDL file for this partnerLink:
<definitions targetNamespace="urn:GetSummaryContent"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:GetSummaryContent"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/">
<message name="MarkMessageAsReadHttpGetIn">
<part name="webid" type="xsd:string"/>
</message>
<message name="MarkMessageAsReadHttpGetOut">
<part name="Body" type="xsd:anyType"/>
</message>
<portType name="getHtmlPageGet">
<operation name="getHtmlPage">
<input message="tns:MarkMessageAsReadHttpGetIn"/>
<output message="tns:MarkMessageAsReadHttpGetOut"/>
</operation>
</portType>
<binding name="MessagingHttpGet" type="tns:getHtmlPageGet">
<http:binding verb="GET"/>
<operation name="getHtmlPage">
<http:operation location=""/>
<input>
<http:urlEncoded/>
</input>
<output>
<mime:content type="text/html" part="Body"/>
</output>
</operation>
</binding>
<service name="Messaging">
<port name="MessagingHttpGet" binding="tns:MessagingHttpGet">
<http:address location="http://server:port/app-context-root/sss.xsql"/>
</port>
</service>
</definitions>
As a result I got bindingFault: [email protected]9b : Could not find binding output for operation getHtmlPage
Could You help me to solve this trouble?
Have You any solution?
Thank You.

What are you trying to accomplish?

Array of strings in BPEL

hi everyone
i have one variable and another variable which is array of strings.this is my inputrequest to BPEL
<element name="createRequest">
<complexType>
<sequence>
<element name="input" type="string"/>
<element name="aostrs" type="client:ArrayOfString"/>
</sequence>
</complexType>
</element>
In MY BPEL i will call a BPEL PRocess using the variable input.i will get a reponse from the BPEL process
like
<Response>
<Return>ETE23TFD</Return>
</Response>
now i need to call another BPEL with attrval and Return(ie response from BPEL)
but i need to pass Return along with array of strings like below xml
<aostrs>
<string>customer</string>
<string>ETE23TFD</string>
<string>group</string>
<string>B79AAF63D870F845980AB3B95DA87692</string>
<string>severity</string>
<string>2</string>
</aostrs>
can you guys help me out how top pass variable of string along with array of strings.....

If i understand your question correctly...
The XML schema would be like this...
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org"
targetNamespace="http://www.example.org"
elementFormDefault="qualified">
<xsd:element name="createRequest" type="createRequestType">
<xsd:annotation>
<xsd:documentation>
A sample element
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:complexType name="createRequestType">
<xsd:sequence>
<xsd:element name="input" type="xsd:string"/>
<xsd:element name="aostrs" type="aostrsType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="aostrsType">
<xsd:sequence>
<xsd:element name="repeatingElement" type="xsd:string"
maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
As you can see in the above schema i have specified the element repeatingElement to be unbounded i.e., 1 to unbounded...
So, may be this type of element would be the input to the other BPEL call...so in order to populate this variable, use can use append operation in the Assign Activity..
you can do the same append operation depending on the number of elements you need to pass to the input variable...
While using append operation, on the source side you need select the string and on the target side, you should select the xpath one level above the repeating element...
Hope this helps...
Thanks,
N

Problem in sending XML input as String in BPEL

Hi,
We have a BPEL flow (assign, invoke, assign) which takes an XML input as String.
<RegisterCustomerOnVAS><CustomerID>100</CustomerID><MSISDN>9999999</MSISDN><CustomerName>sanjeev</CustomerName><customerInfo>new user</customerInfo></RegisterCustomerOnVAS>
Assignment is doing fine, but when Invoke calls partner link, the input is getting parsed and only the first text value (eg 100) is getting passed to the partner webservice instead of the entire XML as string.
Can any one please help us in fixing in this problem.
Thanks

Hi,
You should watch your assign activity (maybe a bad assigment level in copy rule). I think the probem is there.
Cyryl

Converting XML Document Message (xsd string) to BPEL

Hello, I have written a BPEL flow that takes input from a client (a query) then Invokes a scynchronous data service (passes some parameters to run a federated query) that returns an xsd string that is a set of records in XML (see below). I want to understand how I use the Assign function (or other method) to consume the xsd string (XML file) in BPEL.
I set up complexType elements in the WSDL schema as follows (snippet, not complete WSDL) to manage the input and output:
<element name="QueryRequest" type="tns:inputType"/>
<element name="QueryResult" type="tns:recordType"/>
<complexType name="inputType">
<sequence>
<element name="username" type="string"/>
<element name="password" type="string"/>
<element name="city" type="string"/>
<element name="state" type="string"/>
<element name="zip" type="string"/>
                         </sequence>
</complexType>
                    <complexType name="recordType">
                         <sequence>
                              <element name="customer" type="tns:customerType" maxOccurs="unbounded"/>
                         </sequence>
                    </complexType>
                    <complexType name="customerType">
<sequence>
<element name="accountNumber" type="string"/>
<element name="lastName" type="string"/>
<element name="firstName" type="string"/>
<element name="email" type="string"/>
<element name="city" type="string"/>
<element name="state" type="string"/>
<element name="zip" type="string"/>
                         </sequence>
                    </complexType>
Information:
- BPEL PM 2.1.2
- BPEL Designer Eclipse Plugin 0.9.10
<?xml version="1.0" encoding="ISO-8859-1"?>
<recordset>
<customer>
<CustNum>1</CustNum>
<CustLName>aLName</CustLName>
<CustFname>aFName</CustFname>
<CustAddress>111 a street</CustAddress>
<CustCity>austin</CustCity>
<CustState>TX</CustState>
<CustZip>78000</CustZip>
</customer>
<customer>
<CustNum>2</CustNum>
<CustLName>bLName</CustLName>
<CustFname>bFName</CustFname>
<CustAddress>112 b street</CustAddress>
<CustCity>austin</CustCity>
<CustState>TX</CustState>
<CustZip>78000</CustZip>
</customer>
<customer>
<CustNum>5</CustNum>
<CustLName>eLName</CustLName>
<CustFname>eFName</CustFname>
<CustAddress>115 e street</CustAddress>
<CustCity>austin</CustCity>
<CustState>TX</CustState>
<CustZip>78002</CustZip>
</customer>
<customer>
<CustNum>6</CustNum>
<CustLName>fLName</CustLName>
<CustFname>fFName</CustFname>
<CustAddress>116 f street</CustAddress>
<CustCity>austin</CustCity>
<CustState>TX</CustState>
<CustZip>78002</CustZip>
</customer>
<customer>
<CustNum>BOBA101</CustNum>
<CustLName>Austin</CustLName>
<CustFname>Bob</CustFname>
<CustAddress>101 Main Street</CustAddress>
<CustCity>Austin</CustCity>
<CustState>TX</CustState>
<CustZip>78112</CustZip>
</customer>
<customer>
<CustNum>JOHNA103</CustNum>
<CustLName>Austin</CustLName>
<CustFname>John</CustFname>
<CustAddress>112 Main</CustAddress>
<CustCity>austin</CustCity>
<CustState>tx</CustState>
<CustZip>78113</CustZip>
</customer>
</recordset>
Any and all help is greatly appreciated.

Hi Sean,
Can you forward your Project files to us by zipping it and renaming the .zip to .zap and send it to [email protected] with the same subject as this thread?
Regards,
Dhaval

How to Parse XML into String in BPEL?

Hi,
Can anyone tell me, how can I parse XML into String?
I am taking input from File Adapter, File adapter is reading that XML.
Then in assign activity i am using XPath expression(built functions) using XMLParser(),doTranslateToNative() etc.. many functions I have tried but XML is not getting parsed into String Variable.
Please help me asap.
Thanks
Shikha

Thanks a lot Eric.
I am trying this, oraext:get-content-as-string('receiveInput_Read_InputVariable','body','/ns3:orders')
but getting this error
<bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is oraext:get-content-as-string('receiveInput_Read_InputVariable','body','/ns3:orders'). The XPath expression failed to execute; the reason was: internal xpath error. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>

Append String to Integer

Hi Guys,
I am trying to append a String to Integer like this;
String areacode = 020;
Integer phone_no = 21354214;
Integer full = areacode && phone_no;My problem is how to join the two datatypes to a single Integer value. Do anyone know how to go about this?
B

sabre150 wrote:
Skotty wrote:
Without debating the logic of doing such a thing...
Concatenate them as Strings, then convert that String back to an Integer.Your are on the top floor of the Eiffel Tower and a man is trying to climb over the safety netting but having trouble climbing the netting. You ask him why he is doing this and he says he has to get down to the ground as soon as possible but he has an irrational fear of lifts. Do you help him climb the safety netting or do you advise him that this is not a good idea and try to stop him?I get him to use my camera to take my picture.

Append String if do not exists!!

How can we append a string in an array only in case if it do not exists in that array?
Thanks in advance!!

You would probably get a better response posting in the Developers Forum.
Perhaps the hosts will move your post there.

Question on JTextArea.append(String str)

Hi All,
When i provide JTextArea.append("FMTL") it is showing me on the JTextArea but when i give it as
String item="Viswanadh";
JTextArea.append(item).this particular statement is remaming blank on the TextArea.
Any idea why this is happening and is there any other method to be used instead of append.???
Thanks in advance..
regards,
Viswanadh

class OnApplyFormat implements ActionListener{
     public void actionPerformed(ActionEvent formatevent){
          JComboBox source = (JComboBox) formatevent.getSource();
               String item = source.getSelectedItem().toString();
                 System.out.println("Selected Format is:"+item);
                 try
                   if ( item!=null )
                          System.out.println("Format is:"+item);
                 infoarea.append("FMTL");
               infoarea.append(item);
                 infoarea.append("\r\n");
               infoarea.append("FMTU");
               infoarea.append("\r\n");
               infoarea.append("wait 5");
               infoarea.append("\r\n");
          else
               throw new Exception("FormatNotFoundException");
                      }catch(Exception e){
                      e.printStackTrace();
}That is my code and still i am facing the same FMTL is not getting appended with the item variable.
Help me in solving this issue.
Thanks in advance.
regards,
Viswanadh

Loop through Timer is ok, but then, how to append string?

Hi,
reading thorugh this forum, I was able to create a loop cycle via a timer (http://social.technet.microsoft.com/Forums/en-US/a1d160ba-a7d6-4c5c-aa2a-f724990a3b11/add-repeating-entry-to-collection?forum=projectsiena).
Now, I would be ready to collect info of a cell, based on an index of the row (or, better, the ID value, which is incremental) of a collection.
But, how can I append the pulled strings into one final string? So, even if there is the workaround for the loop cycle, how can it be used, other than populate another collection?
Thanks!
Fabio

Hi,
reading thorugh this forum, I was able to create a loop cycle via a timer (http://social.technet.microsoft.com/Forums/en-US/a1d160ba-a7d6-4c5c-aa2a-f724990a3b11/add-repeating-entry-to-collection?forum=projectsiena).
Now, I would be ready to collect info of a cell, based on an index of the row (or, better, the ID value, which is incremental) of a collection.
But, how can I append the pulled strings into one final string? So, even if there is the workaround for the loop cycle, how can it be used, other than populate another collection?
Thanks!
Fabio

How to parse the result xml string in BPEL

Hi,
This is Ishmayel.v new to BPEL and hava experience in xml parsing, java and webservices.
Now I am getting the XML file as a result string in BEPL.
now I want to parse the XML string and insert into the database... If any one has the idea let me know.
my email id is [email protected]
Thanks in Advance,
Regards,
Ishmayel.

Your question is not clear.
You have a client applicaton which invokes a BPEL process and receives XML response from BPEL. Then you want to parse this response XML in your client application?
Or you are running a BPEL process which invokes a service and receives an XML response. Then you want to parse this XML response in BPEL before your process can proceed?
I have to assume that you are working with a string and then you want to convert the string into XML, and then parse the XML. If this is the case, then take a look at the ora:parseEscapedXML(contentString) function. You can use this in the expression editor in JDev.

Element 'append' not expected – BPEL 2.0

Hi,
I have a BPEL 2.0 process and I am trying to use the append activity as follows:
<assign name="AssignResponseData">
<copy>
<from>$OnMessage_Ebiz.part1/ns2:DataArea</from>
<to>$outputVariable.part1/ns2:DataArea</to>
</copy>
<bpelx:append>
<bpelx:from>$OnMessage_EbizOSS.part1/ns2:DataArea</bpelx:from>
<bpelx:to>$outputVariable.part1/ns2:DataArea</bpelx:to>
</bpelx:append>
</assign>
This matches the documentation:
http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bp_manipdoc.htm#autoId34 – section 6.14.1.2 bpelx:append in BPEL 2.0
but I am getting the error Element append not expected. Also bpelx:append is underlined in Jdeveloper and I get an error message saying No Grammer.
Can anyone tell me what I am doing wrong?
Thanks
Robert

Hi,
Thanks for the responses. I am afraid they have not solved the problem.
I have the bpelx namespace defined in the process tag and it is as Vvaladodias suggests.
also the default namespace is as follows:
xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
Also based on Naresh's comments I changed the From Element. (The Dataaarea element contains mutiple system elements. I want to come out with 1 dataarea and mutiple system elements)
I have changed the assign to two separate assigns look like:
<assign name="AssignResponseData1">
<copy>
<from>$OnMessage_Ebiz.part1/ns2:DataArea</from>
<to>$outputVariable.part1/ns2:DataArea</to>
</copy>
</assign>
<assign name="AssignResponseData2">
<bpelx:append>
<bpelx:from>$OnMessage_EbizOSS.part1/ns2:DataArea/ns2:system</bpelx:from>
<bpelx:to>$outputVariable.part1/ns2:DataArea</bpelx:to>
</bpelx:append>
</assign>
Now the second <assign> start tag is highlighted with the message 'Required child missing from element assign'
Robert
Edited by: RobertMetcalf on May 16, 2012 9:47 AM
Edited by: RobertMetcalf on May 16, 2012 9:50 AM

Append strings to file

Hi,
How do i modify "write characters to file.vi" such that every time i append a new string to the same file, it will start at a new line?
There is this parameter in the vi that is called "convert eol"? Read the help file but could not figure out what is a end of line marker. Please help.
Thanks.

Hi,
the easiest way is to concatenate EOL symbol with your string and then write this new string to the file.
So you will write something like
EOL"your string". (or "/nyour string" in codes)
EOL symbol and "Concatenate strings.vi" you can find in "Functions/String/..."
Good luck.
Oleg Chutko.

How to append strings

Hi,
I am trying to append three strings, My middle string will vary upon condition.
start+middle+end, if middle is "not" I need string to be empty, I tried with ? operator but it is not working. Can you please suggest a simple method and other than using if operator.
Regards,
Basil Abraham

The moment one puts a constraint on such as "other than using if operator" a post starts to look like homework. Since a student's homework should be done by the student one should not provide code. You say you have tried the ternary operator '?' but "it is not working" so you must have done it wrongly. Why not post the code that does not work for the forum members to comment on? You might want to give a an example or two of what a correctly operating program should do.

Append string in BPEL

Similar Messages

Maybe you are looking for