Apple push and Lycn conflicting - windows 7 ultimate x64

Hi,
I have Windows 7 Ultimate x64. I have iTunes installed and Microsoft Lync 2010. Whenever Lync is open and I try to open iTunes, I get this pop up message saying the "apple push has stopped working" and gives me the choice to close the program, thus I am unable to sync my iphone. Now if Lync is closed, I can open iTunes with no issues or errors and use it normally, but if itunes is open, I click to open Lync, a pop up windows opens for 3-4 seconds, a window that looks like it is installing Lync and the green bar fully loads in these few seconds, then the window disappears and Lync does not open. After this happens, I open taskmgr and I see "communicator.exe" which is Microsoft Lync, but there is no sign on windows which shows that it is open, only taskmgr shows that it is open in processes. It took me a while to figure out what was conflicting with what, but I finally found out that the issue if apple push that is affiliated with itunes, and microsoft lync. Is there any solution to this? I tried uninstalling and re installing both programs, but the problem still persists.
Thank you,
Malek

Might try this.
1. Launch Adobe Creative Cloud
2. Go to Preferences and then signout
3. Relaunch Photoshop and resignin using same Adobe ID.
See the following link for further info: http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately- launch.html

Similar Messages

SCXI and Aquisition with Windows 7 x64

Our IT just updated our laptops and we received Windows 7 x64.
For data acquisition, we use SCXI hardware in the SCXI-1000DC chassis and a SCXI-1600 USB DAQ Card. In the process of getting my NI hardware configured on the new laptop, I discovered NI does not support Windows 7 x64 for the SCXI-1600. The other options to connect the SCXI-1000 to a laptop are the DAQcard-6062E and the DAQcard-6036E, neither which support Windows 7 x64. According to the information below, there are no plans to support x64.
What are my options to continuing using the hardware we have invested in with the laptop running Windows 7 x64?
Re: scxi and drivers?
[ New ]
04-13-2010 01:09 PM
For those USB devices, there are not currently plans to add support for 64-bit operating systems. This is due to incompatibilities between the USB design of these older devices and the USB implementation in 64-bit version of Windows.
Regards,
Seth B.
Product Support Engineer | Multifunction Data Acquisition | National Instruments
“Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams
Have some feedback about our products, or can't find a product to suit your needs? Let us know! Visit the Data Acquisition Idea Exchange!.
Solved!
Go to Solution.

You will need the NI SCXI-1349 connector block and the SH68-68-EP cable. The SCXI-1349 plugs in to the back of your SCXI module and the cable connects the 1349 to the USB M Series Mass Termination device. All of the rest of the setup is identical to any PCI/PXI E Series device. The USB M Series device will be the Analog-to-Digital converter for the system instead of the SCXI-1600.
Seth B.
Staff Test Engineer | National Instruments
Certified LabVIEW Developer
Certified TestStand Developer
“Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams

WMP600N - weak connection and low signal - Windows 7 x64

I bought the WMP600N because Linksys and Microsoft listed it as 'compatible' for Windows 7 x64.
My experience:
- unstable and weak connection
- pings to websites like google.com drops, average: 1 out of 3
- low signal, on the same spot my three years old HP-laptop with 'a build in wireless card' has full signal strength in Windows 7
- it works well under Windows XP (32 bit)
I'am convinced that drivers for the WMP600N are not ready for Window 7 x64. Linksys (or Ralink, which developed the chipset), please release a proper driver for the WMP600N!
Message Edited by Storm_dutch on 12-20-2009 09:51 AM
Message Edited by Storm_dutch on 12-20-2009 09:52 AM

I'm not sure about you guys, but I use WMP600N and running Windows 7 64bit without any issues. The driver that I'm using now is Driver Version: 3.0.2.0, Driver Provider: Ralink Techonolgy Corp, Driver Date: 6/19/2009. Here's what I did when I upgrded my wireless adapter. 1. Uninstall the original wireless driver from device manager. 2. Turn off the computer and phisically removed the wireless adapter from my computer. 3. Pop in the new WMP600N and turn on the computer. 4. Windows 7 then automatically detects the new adapter and intall the proper driver for it. Well, that's all I did. The whole process is very simple and straight forward.

New apple id and email conflict

Running Snow Leopard. Needed to reset password. Old apple id and email ended in mac.com. Now it says I cant have apple id be same as email. This totally screws my accounts,downloads and email up. I Need my apple id to be the same as email . Help please

Hello peterkellygolf,
I'm not sure where you are seeing the prompt for your older Apple ID, but there are several articles about changing the ID.
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
If you're asked for the password to your previous Apple ID when signing out of iCloud
And here's a good one for all the places you may need to change it.
Apple ID: What to do after you change your Apple ID
Thank you for visiting Apple Support Communities.
Nubz

Ipod Touch not syncing and/shutting down Windows 7 x64

I recently upgraded my HP Pavilion to Windows 7 Home Premium, from Vista Home Premium and have been experiencing a major problem with the connection of my iPod touch to my computer. The iPod is a 16GB (ver. 3.2.1(7D11)). The issue is that my iPod won't sync anymore to my computer. When I connect the device, iTunes opens and starts to sync. About 20 seconds later the iPod shuts off and the computer restarts...blue screen...and reboots like nothing happened. Error reporting shows a "Video Hardware Error" with a bunch of information about the problem. I have searched and searched for different solutions (reinstalling iTunes, going in from a different user account on the computer, deleted certain files or resetting settings) with no results that remotely fix the issue. It's to the point now that the iPod won't sync at all and I have no way to get new music, etc onto the device. Any thoughts?

Found a fix...this is a hotfix that is through MS and spans multiple posts. It's a USB hotfix for people needing to fix many issues (external HD, thumb drives, ipods, etc...). Things to remember, this hotfix is for Win 7 with certain parameters, please read the posts for seeing if your machine is applicable to the hotfix. Also, USE INTERNET EXPLORER for all downloads and fixes through MS. For some reason Firefox send incorrect data to MS. Below is the link the the hotfix discussion. Mark, a MS Pro Tech is on that really helped get this going. I hope this works, two sync's in and we are all square. Thanks for your patience.
http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/3aae3b66 -6a1a-47e8-ad1b-b20b68eaecf8/
Mark

Sync difference (bug?) in the case of admin and user under Windows XP x64. Sudden loss of bookmarks.

I have just found a problem (a bug?) when syncing my Firefox 11.0 on home desktop under Windows XPx64. Under administrator profile everything is OK. But under the user profile a HUGE amount of bookmarks is lost somewhat suddenly. Just a month ago everything was in the perfect state under the user profile as well.
No problems for portable devices (Android and iPad) and office notebook (WinXP, admin profile) detected.
I would appreciate any hints or help on this since I don't do routine work under admin rights on my home desktop.

Well, resetting sync can solve this problem. Though certain parts of local history on this computer may be lost.

W540 Wireless and Bluetooth for Windows 7 x64 [SOLVED]

I have purchased a W540 with the 'Intel® Dual Band Wireless-AC 7260 (2x2, 802.11ac/a/b/g/n) with Bluetooth® 4.0' option.
As per usual I am doing a fresh install of Windows 7 but I can't figure out how to get bluetooth working?
I've installed the 'Intel Wireless Bluetooth 4.0 Adapter Software for Windows 8 (64-bit), 7 (32-bit, 64-bit) - ThinkPad' (filename giww08ww.exe) however I'm not sure what to do next. I see no bluetooth in device manager or control panel, or icon in the taskbar.
Additionally the device manager shows no misconfigured (!) devices.
What is supposed to happen or where am I supposed to go from here?

Hi,
Installation of hotkeys let you enable Bluetooth through the soft switch. So I doubt hotkey features is something which cannot be avoided.
Nice to hear that your issue got fixed. Please feel free to post back in Lenovo Community Forums if you have any
further query.
Cheers!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

After sharing itunes with MP3 rocket I get a pop up window telling me that my Apple Push is not working at present. Do I need apple push?Everything is working well for me with itunes and Rocket. Also what is Apple push.

I have been sharing itunes with MP3 rocket but I still purchase many songs and books from itunes normally.I have not had any trouble. Just recently a pop up window appears after I have been sharing and it tells me that my Apple Push is not working corectly and windows is looking for the problem. What is Apple Push and do I need it. as everything seems to be working well for me.Can you please advise me.

Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo

Apple Push stopped working

Immediately on launching itunes I get the message Apple Push has stopped working and then itunes crashes. I've tried all the suggested fixes in the help file, uninstalled and reinstalled itunes, no luck. What on earth is apple push and how can I remove or fix it?
I didn't even plug a device in or make any changes to itunes, it was working great until it just crashed out the blue. So frustrating, thanks for nayone who can help me!

I renamed C:\Program Files (x86)\Common Files\Apple\Apple Application Support\ASPDaemon.exe to C:\Program Files (x86)\Common Files\Apple\Apple Application Support\ASPDaemon.bak and the problem went away, it's probably because I had data in my User folder that conflicted, but I don't actually use an ipod, just like iTunes to manage my music and purchase new music, so air sync seems a bit redundant.
Hope this helps anyone who doesn't need to wifi sync.

Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

Dear all X-FI members
I have an X-FI Xtreme Fidelity card and install with Windows Vista x64.
. I download the latest driver from Creative SB-XFI Version 2.3.002
2. I download the Media Source CMS5 Version 5.0.38
3. I install both of them
4. I download YouP-PAX XFI2007 Revesion 2 from the web filefont below:
http://files.filefront.com/YouP_PAX_X_FI2007_Rev2/;748043;/fileinfo.html
5. I extract to a folder. inside the folder there is an instruction as below:
Don't click on setup.exe but click on PAXsetup.exe. It gave an error.
6. I cancel and do it again by clicking on Audio(sub-folder) and then click on
setup(sub-folder)and then click on setup.exe. It gives me a table to select.
I uncheck driver box, and click next and go through the rest installation smoothly.
7. After restart computer. The MediaSourceGo pops up and display all features
8. I check THX console with gane mode and entertaiment mode. All works
9. On both Modes, all speakers 2., 4., 5. and 7. can be selected and have all sounds
0. X_FI CMSS-3D is enabled, X_FI Crystalizer is enabled, EQ and Mixer are worked.
. I do not play games so i do not know any thing about Alchemy and game stuffs
2. when you try to change the Speaker mode. You have to click on THX console to do
3. By the way, even the YouP-Pax revision was working well too. I don't see anything different from YouP-Pax X-FI2007 revision 2. They both work well for me.
4. Reminding that. When you install the applications. PleaseDon't click on setup.exe or Paxsetup.exe. But please click on Audio folder, and then setup folder. then you see the setup.exe, please go down and click on setup.exe and please uncheck the driver box and anything you don't want to be install then uncheck them. After that click on next and that is it. Restart computer.
With all the best to all of you.

Thank you for your post a reply RejZoR
I have come back and updtae the driver from YouP-Pax 2007 revision 2, and it was going through well. You are definitely right.
I hope that every one has all things worked well and be happy with what they have bought from creative
many thanks to those who has done a good contributions to the drivers and applications to make them work.

TEMPRO is not working for Vista Ultimate x64

Hi
I have a Qosmio F50-10K and I installed Vista ultimate x64 and the Tempro appliaction is not working. After I install it, I left the Start Tempro button checked and when I press finish it gives me this error:
"internal error 2753
Toshiba.ui.controlpanelapplication.exe"
Same thing happens when I uncheck the box with start tempro.
For both situations nothing is left in the system, no files, no regstry, nothing.
Please HELP
Thank you

Hi!
I searched on the Toshiba download driver page and I found out, that Tempro is only available for Vista 32bit, not for 64bit.
So I think Tempro will not work on a 64bit OS.
Bye!

X200: CPU frequency scaling not working in Windows 7 x64

Hi there, this is first posting here. Trust this issue has not been addressed before--if it has please redirect me to the post where this discussion happening.
Here is my hardware: X200, P8700, 2.53GHz, 4GB RAM, 7454-32U
I have just upgraded my RAM from 2GB and clean installed Windows 7 x64 (came with XP x86). I have also loaded all the drivers including the power manager driver and power manager from IBM/Lenovo support/download site. all hardware is working fine.
My only problem is that the fan is always on--running at about 3340RPM and blows all the time--temps are at around 42-46C. I have noticed that the CPU is quite, but firing at max all the time--does not scale down when no activity. tis happens when I select "power source optimized" on battery and on AC.
I have noticed that when in XP 32-bit, the CPU will come back at rest to 786MHz--and go up when needed.
Could someone please help me figure out what is goin gon here? I am so tired of looking and posting on other forums that I am about to go crazy. I love this machine, but my only issue now is this.
I have also checked the BIOS and set the CPU to "automatic" and Speed Step is on. I am using the latest BIOs version v3.11 Dec 2009.
Please help me.
Regards
S

Hi Jessica Thank you for the reply and also pointing me to the Upgrade Advisor links-Here is the output for the 64-bit Windows 7 Compatibility assessment--as you see there are no issues with Hardware compatibility. Also I have downloaded all the applicable drivers from Lenovo. The problem still persists.
if you could link me with the direct access to the power management related drivers from lenovo, ACPI and BIOS drivers I will appreciate a great deal. Also to mention, I have upgraded the BIOS Feb 2010 release, and also the Power manager driver to v3.12 (no fixes in fan speed and CPU freq scaling I am afraid.)
====================
Windows 7 Upgrade Advisor
Information about upgrading to 64-bit Windows 7
System
Details
Custom installation required
You'll need to perform a custom installation of 64-bit Windows 7 and then reinstall your programs. Make sure to back up your files before you begin.Go online to get important information about installing Windows 7 on a PC running Windows XP
Outlook Express
This program is no longer included in Windows 7. You can get similar programs for Windows 7 from other software manufacturers.Go to the Microsoft website to learn more
More info from LENOVO
LENOVO has a website that might give you more information about getting Windows 7 running on your PC.Visit the LENOVO website
Windows Aero support
Your graphics adapter supports the Windows Aero user interface.Go online to learn more about Windows Aero
CPU speed: 2.5 GHz
Your CPU meets the 1 GHz minimum requirement.
3.0 GB of RAM
Your PC meets the 2 GB minimum requirement.
81.9 GB free space available on C:
Your hard disk meets the minimum requirement of 20 GB free space for 64-bit Windows 7. Devices
Status
Details
Conexant 20561 SmartAudio HD
Conexant
Compatible
This device is compatible with Windows 7.
Intel(R) 82567LF Gigabit Network Connection
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 1 - 2928
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) WiFi Link 5100 AGN
Intel Corporation
Compatible
This device is compatible with Windows 7.
Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation
Compatible
This device is compatible with Windows 7.
Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation
Compatible
This device is compatible with Windows 7.
ThinkPad Bluetooth with Enhanced Data Rate II
Broadcom
Compatible
This device is compatible with Windows 7.
=================================

Thinkpad T61p is incompatible to Windows 7 x64

Dear Lenovo Support, i never had that kind of crap with any other thinkpad i bought. Today i tried to update my Thinkpad T61p (6457-7XG) to Windows 7 x64 which is already long enough on the market to update all drivers from your site. Remember: It has a very long beta and RC phase. Long enough to check everything is working without extra work for the user.
Things are crap:
1)Lack of Win7 drivers for the integrated sd-card reader.. The driver from the Homepage installs. Everything is ok in the Hardware Manager. If i plug in my card, nothing is happens. (my card is 100% ok). At this point i need to search and tryout to get this thing working.
2)Lack of working bluetooth software. The support homepage offers v6.1.0.5100 which is definitive not working with Windows 7 x64. At this point this is not an up to date driver because the newest software is 6.2.0.9600 and is working with windows 7. If i try to download it from broadcom the setup software cancels because lenovo devices are not supported. So i need to do a workaround by myself because you are not able to fix it by time.
3)If i plug out my ethernet cable the lenovo software tries to switch to wlan. sometimes it starts to hang and my mouse is moving by 1-2fps... same problem occurs if i deactivate my wireless device by default so it cannot switch. This bug is representable at any time. There is no possibility to save anything after it starts to hang. I need to press the power button until the system powers off.
I also never had some high frequent beep noise in hard disk access mode until i bought the T61p.
If i sum all things i am realy unhappy with this product. My warranty expires in 286 days and i will need a new notebook. So tell me a reason why i should by a new lenovo notebook which would be less supported with actual os versions? Will i have the same problems by updating a new lenovo product to windows 8?
I am also wondering now why i bought a expensive lenovo product if i could buy a product with the same quality for 1000$ cheaper.. so where is this money at? It is definitive not the same quality as ibm provided it with the old thinkpads up to T60. The Thinkpad T61p is not as old to stop the driver support for new os because a lot of people still using it with a extended warranty in a productive enviroment. In this case its better to use win 7 then vista.
Thinkpad T61p (6457-7XG)

The company i work for got several T61 and T61p running Windows 7 x64 without any such issues. I'm not sure if you got a hardware problem or software problem, but you say that you tried to update to Windows 7. Does it mean you performed a upgrade from Vista or a clean install of Windows 7? I always suggest a clean install since i had several issues with OS upgrades in the past. So if you did a upgrade you might have some issues because of that. In that case i would suggest a clean install of Windows 7. If the problems are caused because of a OS upgrade you cannot blame Lenovo. This could be a problem for any computer whatever Brand. There is also some BIOS updates that contains some Windows 7 fixes, did you update your BIOS before the installation or did you check that you already had a pretty new BIOS version that is supposed to work fine with Windows 7?
This is not a general problem for all T61/T61p models so it got nothing to do with low quality of the Lenovo models. There is no way you can get a computer with similar quality/spec that cost $1000 less. In that case it's either not the same quality or not the same spec. Windows 7 is supported on T61/T61p and there are drivers available that work fine. I never did a upgrade to Windows 7 and always performed a clean install. I read that several others performed a upgrade without these kind of problems though.

AnyConnect client 3.1.04063 Windows 7 x64 users cannot make ssl connection

Over the past week several of my users have suddenly found they cannot connect with a previously working client. After the login banner is accepted they all get an error message "The certificate on the secure gateway is invalid. A VPN connection will not be established." Then another message "AnyConnect was not able to establish a conenction to the specified secure gateway. Please try connecting again." On the ASA 5540 logs I see successful authentication and then the device is trying to establish a ssl session which is denied and then connection is terminated.
I have verfied that the ssl certificates are valid and are installed in the trusted root certificates location. I have checked that ICS is disabled. I have checked that the vpn adapter display name is correct.
Does anyone have any ideas?

We are not using a self signed cert. We have a cert issued by the DoD. It seems like a user who had previously connected and is on Windows 7 x64 will not be able to connect. Users who have never connected and browse to the site will be able to successfully connect.
Additional information: I have cleared all DoD related certs and the server cert from the certmgr.msc on an affected Windows box. Uninstalled the AnyConnect application and all remnant files. Cleared SSL cache on both IE and Firefox browsers. I rebooted then tried connecting via the web address but am receiving the same issue.

Windows 7 x64 - No Drive Detected. Please Load Mass Storage Driver........

Hi there..
I just installed a new harddrive on my MacBook Pro (a Samsung SpinPoint M7 Enhanced 640GB)
I formatted it to HFS+ during Mac OS X install, and it works great.. Later on I made a partition, using Boot Camp and began installing Windows 7 x64, only when I come to the screen where I need to pick a partition, there is none..
It doesn't seem to find a HDD and asks for a 'Mass Storage Driver'
Does anyone have an idea of how to solve this problem?

Hi Fortuny, and thanks
The Windows Install disc is retail, the same disc I used to install Windows 7 on my old hard drive via boot camp..
Usually I don't have any issues with this stuff, I've tried it a couple of times helping my friends, but since I changed the hard drive from the standard 320 GB FUJITSU MJA2320BH FFS G1 to a 640 GB Samsung SpinPoint M7 Enhanced (HM641JI) It just doesn't seem to detect it during Windows 7 Install..

Apple push and Lycn conflicting - windows 7 ultimate x64

Similar Messages

Maybe you are looking for