Apple this is a bug in ios5!

Apple, I love your products but this is a small bug I have discovered using ios5 with iphone 4s. When i am listening to a podcast at x2 speed and I receive a call via bluetooth it returns to my podcast at regular speed even though it still shows it at x2 speed. Very small but kinda annoying...this worked fine in ios4.

I noted when listening at x1.5 speed it was breaking up, but was OK at x2

Similar Messages

In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)

I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.

When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data. This problem does not occur when I manually sync music to my phone. Is this a common bug, and if so; is there a fix?

When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data on the phone. This problem does not occur when I manually sync music to my phone only when I access imatch. Is this a common bug, and if so; is there a fix?

yes it is. you can sign out of itunes account then sign back in. use http://support.apple.com/kb/ht1311 to sign out.

Is this a JOGL bug with GLJPanel, a driver problem, or what?

I've been trying to eliminate a problem I've been experiencing with my WorldWind Java (WWJ) application and I think I've finally taken a step torward finding the root cause, but I'm not sure whose problem it is yet or who to report it to, so I thought I'd start here and work my way up; if it can't get solved here, maybe it's a driver issue.
The issue goes something like this:
(Note: this only occurs when the -Dsun.java2d.opengl=true flag is set.)
I have a GLJPanel on my primary display that works beautifully. I drag that panel onto my secondary display (slowly) and it disappears. Poof. If I position the panel halfway between screens, I can get about half of the panel to render on the secondary display, but any further than that and it disappears. I tried this on a Frame and with a GLCanvas as well and got different results: in a Frame, if I dragged the Panel over and then dragged it back into the primary display, it would disappear on the secondary display, but reappear on the primary display once it was dragged back. With the GLCanvas, I didn't have any issues.
It's fairly simple to recreate this on my computer by using a WorldWind example that extends ApplicationTemplate and just adjusting ApplicationTemplate to use WWGLJPanels.
However, I went so far as to reproduce the problem with a plain old GLJPanel:
import com.sun.opengl.util.Animator;
import java.awt.GridLayout;
import javax.media.opengl.GL;
import javax.media.opengl.GLAutoDrawable;
import javax.media.opengl.GLJPanel;
import javax.media.opengl.GLCapabilities;
import javax.media.opengl.GLEventListener;
import javax.swing.JFrame;
public class TrianglePanel extends JFrame implements GLEventListener {
    public TrianglePanel() {
        super("Triangle");
        setLayout(new GridLayout());
        setSize(300, 300);
        setLocation(10, 10);
        setVisible(true);
        initTriangle();
    public static void main(String[] args) {
        TrianglePanel tPanel = new TrianglePanel();
        tPanel.setVisible(true);
        tPanel.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    private void initTriangle(){
        GLCapabilities caps = new GLCapabilities();
        caps.setDoubleBuffered(true);
        caps.setHardwareAccelerated(true);
        GLJPanel panel = new GLJPanel(caps);
        panel.addGLEventListener(this);
        add(panel);
        Animator anim = new Animator(panel);
        anim.start();
    public void init(GLAutoDrawable drawable) {
        GL gl = drawable.getGL();
        gl.glClearColor(0, 0, 0, 0);
        gl.glMatrixMode(GL.GL_PROJECTION);
        gl.glLoadIdentity();
        gl.glOrtho(0, 1, 0, 1, -1, 1);
    public void display(GLAutoDrawable drawable) {
        GL gl = drawable.getGL();
        gl.glClear(GL.GL_COLOR_BUFFER_BIT);
        gl.glBegin(GL.GL_TRIANGLES);
        gl.glColor3f(1, 0, 0);
        gl.glVertex3f(0.0f, 0.0f, 0);
        gl.glColor3f(0, 1, 0);
        gl.glVertex3f(1.0f, 0.0f, 0);
        gl.glColor3f(0, 0, 1);
        gl.glVertex3f(0.0f, 1.0f, 0);
        gl.glEnd();
        gl.glFlush();
    public void reshape(GLAutoDrawable drawable, int x, int y, int width, int height) {}
    public void displayChanged(GLAutoDrawable drawable, boolean modeChanged, boolean deviceChanged) {}
}If it helps, the video card I'm using is a Quadro NVS 140M.

steffi wrote:
This is a bug that I'm seeing in Apple's new MobileMe service and I believe they are making use of the System Messaging Server product. (Sun Java(tm) System Messaging Server 6.3-6.03)I can't comment on what Apple may or may not be using ;)
Specifically I have an email that's MIME HTML and what I observe is that lines >999 chars are being truncated so in my case the nested table doesn't render correctly because a whole chunk of the HTML itself on this line has been truncated.The email client generating the message is broken and Messaging Server is 'fixing' the email by truncating the line to the maximum line-length as per the standards.
Refer to "2.1.1. Line Length Limits" in http://www.faqs.org/rfcs/rfc2822.html
Regards,
Shane.

Is this a know bug with the Mail server?

This is a bug that I'm seeing in Apple's new MobileMe service and I believe they are making use of the System Messaging Server product. (Sun Java(tm) System Messaging Server 6.3-6.03)
Specifically I have an email that's MIME HTML and what I observe is that lines >999 chars are being truncated so in my case the nested table doesn't render correctly because a whole chunk of the HTML itself on this line has been truncated.
The message fails to render correctly in their Web Client but also in Mail.app when it's accessed over IMAP4

steffi wrote:
This is a bug that I'm seeing in Apple's new MobileMe service and I believe they are making use of the System Messaging Server product. (Sun Java(tm) System Messaging Server 6.3-6.03)I can't comment on what Apple may or may not be using ;)
Specifically I have an email that's MIME HTML and what I observe is that lines >999 chars are being truncated so in my case the nested table doesn't render correctly because a whole chunk of the HTML itself on this line has been truncated.The email client generating the message is broken and Messaging Server is 'fixing' the email by truncating the line to the maximum line-length as per the standards.
Refer to "2.1.1. Line Length Limits" in http://www.faqs.org/rfcs/rfc2822.html
Regards,
Shane.

Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun fatha/damma etc. would reverse automatically. Is this a known bug?

Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun + fatha/damma etc. would reverse automatically. Is this a known bug?
Example: عَيْنٌ
would automatically convert to عَيُنْ
Funnily, it doesn't seem to happen here, but it does when entering text in a web interface (using Firefox, font Bayan) and when using Text Edit.
Seems to be a problem of a specific font, as e.g. Arial MS Unicode works fine. Any hints?
Thank you!

Musaafir wrote:
I've no idea how i can even start using arabic vowels on Microsoft Word for Apple
You can't do Arabic on MS Word for Mac. This app has never supported RTL scripts, so you need to use something else. Mellel is best, but Pages 5, TextEdit, Nisus Writer, Open/LibreOffice should work OK.
You switch between languages by using the "flag" menu at the top right of the screen or by using the keyboard shortcuts apple/command plus space. Go to system prefs/keyboard/shortcuts to make sure that is activated.
To see which key does what, you use Keyboard Viewer.
http://support.apple.com/kb/PH13746
You place vowels on letters by typing the key for the vowel after the key for the letter. The vowels are on the option/alt keys, option/alt + a gives you َ

We have an iphone 5c that is not keeping the correct time whether using the auto update or manual selection. is this a os bug?

iphone 5c is not updating its time properly using set automatically. is this an os bug?

Hi TheLongRider,
Thanks for visiting Apple Support Communities.
I recommend this advice if the incorrect time is being set automatically:
Follow these steps. Test after each step to see if the issue is resolved.
Ensure that the version of iOS on your device is up to date.
If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
If you are setting the time manually and it is still incorrect, this advice may apply:
Note: If you find that your device's time is incorrect after you sync with your computer, your computer's time may be incorrect. Verify the computer's time in System Preferences > Date & Time (you may want to select the checkbox to set the computer's date and time automatically).
You can find this information here:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Cheers,
Jeremy

So is there a fix for this Time Zone bug?

apple, is there a fix to this Time Zone bug in Calendar?

You are not talking to Apple, just other Apple users. If you are experiencing something you think is a bug, you will have to describe it or reference some description. I am unaware of any specific Time Zone bug.

Keyboard not visible in whatsapp after I upgraded to ios7. I have to type on the chat to get my keyboard visible. This is a bug :( poor testers..

Keyboard not visible in whatsapp after I upgraded to ios7. I have to type on the chat to get my keyboard visible. This is a bug poor testers..

Hello dhiliptcs,
It sounds like the WhatsApp app on your iPhone does not have a visible keyboard. I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

IMessage notification alert tones are not working on my iPad ios 8. Is this a know bug?

my iMessage settings are exactly the same on my iPad air as on my iPhone five, but the alert tones do not sound off when I get an iMessage. Is this a known bug with or without a fix? Is there a setting that is different on the iPad then on the iPhone that I am just overlooking?

Hi AppleUser543210,
If you are having issues with your iPad's notification alert sounds not functioning, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPad -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPad as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Serious bug of IOS5, can't send receive call&SMS

I have a iphone 4 and upgrade ios 5, after that i find some problem.
1, switch off the Cellular data.
2, send several MMS to my iphone. more than 3 MMS.
3, do a location update, you can swith off the phone and then swith on again. or walk to some place without signal coverage and then come back.
4, now the phone can't send or recevie call, also can't send and receive SMS, the phone has no error message.
But if you switch on the Cellular data, after the iphone receive MMS, everything okay again.
I think this is a serious bug of ios5, if i travel to other country, i will switch off the Cellular data, and my operater will send me MMS every day, if i reboot my phone, than i can't send or receive phone call. The most serious, if my friend call me, from his side, the ring is on, buy on my phone, there is no response of this phone call!!!

Hi there, NewVerizonCustomer! So sorry to see that you're not able to send your messages. I'm eager to help! First, have you noticed that those contacts with failed messages tend to be the same contacts each time? If that's the case, do you know if those contacts are also iPhone users (doesn't matter which carrier)?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Come on Apple - this is not enough!

Come on Apple - this account mess has to be streamlined! Really!
My setup: 3 different Macs, 2 iPhones, one iTunes Library, my wife, me.
We both use all 3 Macs and have our own accounts on each machine. We have both our own MobileMe account. (Wife has sub account of my main account).
We want to have ONE iTunes library where all our music and iPhone apps are stored and synchronized. We want to access this library from all our macs for music and video.
We don't want to sychronize stuff manually. The mac where we synchronize our iPhones is usually not the Mac where we are listening to music. To backup our iPhones it is ok that we have to use one dedicated Mac.
Does this setup and these requirements sound familiar to someone?
But Apple - what you did for us is a big mess:
1. We have iTunes accounts, MobileMe accounts and user accounts on each of our Macs. When do we use which? How do they relate?
2. We need to activate our computers. If I do this from my account on one of our Macs the same Mac under the account of my wife is not activated. So: I did not activate "the computer" I did activate "the computer for MY account".
3. Why can't we use "home sharing" without having to connect this to an iTunes account? What is its relevance? But: We can buy simultaneously from another iTunes account.
This leads to:
My OS account (not "my computer"!) is connected to my MobileMe account, while I use a different iTunes-Account but home sharing is achieved with my MoblieMe account again.
My wife's account on the same machine is connected to her MobileMe-Account while her iTunes is connected to my iTunes account. This is neccessary to be able to share apps for our iPhones.
Do we have to activate our computers for each user separately? In our case this would mean: 3 Macs, 2 users = 3*2=6 active computers. But the maximum is 5. If we had a child with its own account would we need 3*3=9 activations?
Apple rarely recognizes in its documentation that multiple users on one machine exist. There is no such thing as a description on i.e.
- "How to use multiple iPhones on one Mac in different user accounts with the ability to share apps".
- "How to setup home sharing for different users on the same machine"? Is it even necessary?
- Apple, give us recomendations and example setups. Incl. where to use which user!
Another thing:
- With home sharing we have the abilitiy to MANUALLY add files to our library. Manually! Seriously: If my wife wants to hear music on the MacBook in the living room she wants to hear music and not copy files over Wifi.
Probably this all works somehow - I didn't check it all out. But it is completely intransparent and not user friendly. Apple is supposed to be all about easiness and ergonomics. I can't see any of this here.
To come to a conclusion:
Apple:
- Please recognize the you are offering a multi user operating system and provide documentation, use cases, and the usability the name Apple usually stands for!
- Every company in the world tries to Single Sign On their employees to the corporate network. But you force us to think about OS users, MobileMe users, iTunes users and activated computers. And that without adequate documentation.
- Please give us a family iTunes-Server: One library for all, auto-sync for mobile Macs.
- Recognize the fact that the real users today are not single persons but in many cases families.
And btw: Often you have this information: We have a family account! Why is there NO functionality attached on the main account of a familiy account?!
I could write a rant like this for MobileMe as well - don't get me even started here. (Why can't we have a family calendar and address book? Why is Exchange support more powerful than MobileMe? Why is Google synchronizing more powerful than MobileMe).
Regards,
Martin

I could not agree with you more.
My wife and I have 4 Macs (all intel running Snow Leopard), 1 Dell (XP with iTunes), 1 iPod Touch, 1 iPod shuffle, 1 iPod Mini, 2 iPod Nanos (for various environments) MobileMe, and 2 iTunes accounts.
She buys songs for her, I buy songs for me. We manually sync the songs so that each Mac has all songs (which as you can imagine is a giant pain in the you know where).
Apple, as Sanaponic said, you market a multi-user operating system.
So stream-line this experience to make it easy for multi-user homes to enjoy the media we purchase from you!

Calendar adds an extra day when creating an event in ios 8.1.3. Is this a known bug?

When i add an event using the calendar app in ios 8.1.3, it adds an extra day to the event when using a range of dates. I am able to recreate the problem. when entering the event i select a range of dates and confirm that it is what i want. after submitting, i verify and it has added an extra day at the end. Is this a known bug or am i on my own? Help please. this is annoying having to check each event after entering it.

Ive reset, restored and this is the second phone. Thought it maybe a wonky screen that would shift it while setting dates. THe only thing I can think of is that I am syncing with google calendar, but it only happens when setting events in ios not if i do it from google website on desktop PC.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Project explorer doesn't show callers for .rtm (run time menu) files (is this a confirmed bug?)

Maybe I was to quick to report this as a bug... I was unable to find anything related to it at my normal sources of information. Does someone has exeperience with it?
I have a work-around and this is included in the description :
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=6776 (message 25)
** Original post **
When a library (.lvlib) that contains a file with a run-time-menu (.rtm) file is removed from the project, but there is still a file that uses this .rtm file, both the .lvlib and all of it's vis and the .rtm file are displayed in the project Dependencies.
For the Vi's the callers can be found by 'Find->calllers'. For the .rtm file this always results in 'No items found' but the .rtm file remains in the Dependencies (as it should since it is still used).
Finding the .rtm file can be hard since it is only loaded at run-time and not at edit time(?). If someone encounters this issue, a working method:
- rename the rtm file (so it cannot be found)
- open the vis that you suspect are using this file AND try to edit the run-time menu. When this vi uses the run-time menu a warning will appear (cannot load rtm file, using default menu instead)
Kind regards,
Mark

Dear Mr. Beuvink,
thank you for your reply. It seems that a while back this problem has been reported to our R&D group. The request (CAR) has ID; 41579. There is the following statement in this CAR: the caller vi is in memory or not. When a caller vi is in memory, rtm files will currently never report the vi as a caller. This confirms the behavior you are seeing.
I'm sorry to say I don't have a solution at this moment, at this moment they are busy fixing this problem. You can look this up in future release notes by searching on the CAR ID I mentioned.
If you haven any questions, please don't hesitate to contact me.
Best regards,
Martijn S
Applications Engineer
NI Netherlands

Apple this is a bug in ios5!

Similar Messages

Maybe you are looking for