Applet only works from local server

I developed an applet that has worked perfectly during my testing on my local apache server, but when I put it on my web host the applet won't load and the browsers lock up. I have tried it with a couple of browsers. I am at a serious loss to figure out why it wouldn't work from my web host.
My class files are in a jar because I have several classes, and the jar works fine from my local server.
Someone suggested that I do a stack dump. I put some code in the init method to dump the stack, but nothing changed. I have no idea where to find the stack dump from an applet. The browser doesn't have a window to display it (that I know of) and my applet certainly doesn't have a stack dump edit control.
Does anyone know how I can proceed with this? I am usually very clever about tracking down bugs and problems, but this one has me stumped. I am not posting code here because I have tested all the code on my local server and it all works great, just not from the web host. If posting code would help find a solution, I will be happy to do that.
Any help would be very much appreciated.

I am using gFTP to upload it. Below is the status info that I get during the upload. It changes the permission to -rw-r--r--, which is the same as everything else on the server and makes sense to me. After the upload, there is a message about ASCII, but I am assuming it is just switching back to ASCII mode after the upload.
Loading directory listing /public_html/mydir from cache (LC_TIME=en_US.UTF-8)
PASV
227 Entering Passive Mode (209,85,106,12,79,105)
STOR /public_html/mydir/myjar.jar
150 Accepted data connection
226-File successfully transferred
226 205.601 seconds (measured here), 44.19 Kbytes per second
Successfully transferred /usr/local/apache2/htdocs/mysite/mydir/myjar.jar at 44.48 KB/s
SITE CHMOD 644 /public_html/mydir/myjar.jar
200 Permissions changed on /public_html/mydir/myjar.jar
SITE UTIME 20071212173109 /public_html/mydir/myjar.jar
500 UTC Only
Loading directory listing /public_html/mydir from server (LC_TIME=en_US.UTF-8)
PASV
227 Entering Passive Mode (209,85,106,12,79,123)
LIST -aL
150 Accepted data connection
226-ASCII
226-Options: -a -l
226 15 matches total
Edited by: sawatdee on Dec 13, 2007 6:14 AM

Similar Messages

Lumira Universe Connection only works on Local Server

Hi guys,
My SAP Lumira always fails to acquire Universe Connection when I'm using it in my local computer.
When I use Lumira on the SAP BO Server and try a local connection to the Universes I have no problem at all.
I've already opened ports from 6400 to 6420. I also made some tests with the firewall disabled, but nothing changed.
I've included an attachment with the Lumira log message
Thank you all.

Hi,
With reference to Lumira 1.15, the minimal SP we support is BI 4.0 SP6. Please upgrade at least to this. Everything is detailed in the PAM https://websmp107.sap-ag.de/~sapidb/011000358700001095842012E
Best regards,
Antoine

BPC Report emails only work from server (not client) - BPC v5.1

Hi all.
Hope someone might have seen something like this before.
Basically, I setup our servers to send email from BPC about 3 weeks ago.
(NB - If it makes a difference, we use Lotus Notes via a Domino server)
The SMTP settings are all correct in BPC WebAdmin, the servers have been added to the allow list on the mail server and the port is open.
Anyway, when I try to send mail from a client (using the Offline Report Distribution Wizard), I get the following error:
"The transport failed to connect to the server".
At SAP's suggestion, I ran a test by installing Office and a BPC client directly onto the Web Server.
When I ran the wizard from the server, the email sent perfectly.
The problem I have now is that although I informed SAP of the test outcome, I haven't heard anything back in about 3 weeks, and I really need to get the reporting email system up and running properly.
Does anyone have any suggestions on what could be causing this?
It's as though the system is telling the client to send the email itself, via the forwarding server, but this would mean allowing every user PC to access the mail server.
Hope you can help, but thanks for looking either way.
Craig

Hi Ludovic
The problem turned out to be mail server white-lists, due to the way that BPC sends emil.
Although you setup the email account/profile on the server, it actually sends from the client PC of whichever user makes the email request.
Our system is only configured to block all email requests with individual exceptions (ie a White-List).
It needed the PC of every user who would need to send email from the BPC system to be added to the white-list.
This is why it worked from the server, as we had added the server address to the list as part of the testing.
Not reall y a BPC problem, more of an issue with functionality due to the method that it uses to send the messages.
Hope that helps
Craig

Printing only works from one computer

I have an Epson Stylus C60 connected to the USB port on my Airport Extreme. There are two computers on the network, a PowerBook G4 and a MacBook Pro. Both computers connect to the network very reliably and have internet access. The problem is that the MBP cannot print to the connected printer. The G4 has always printed fine.
The MBP sees the printer as a Bonjour printer, and I can add it to the printer list without problem. When I try to print, I get a message in the print queue that there is a communications error with the printer.
In the airport configuration window, the printer is recognized and remote printing is enabled. Any idea why printing only works from the G4?

Thanks for your help. Yes, the driver is a universal binary and the printer works great when plugged directly into the computer. I just can't figure out why it won't work over the airport.
Any other ideas?

Error adding new users from local server

Hello, BPC Gurus,
We use BPC 7.0 MS SP4, MS SQL 2008 (Server name - BPCP01)
In Administration Console we're trying to add user from local server (server with SQL Database), and warning window is appeared with message "The Server Is Not Operational [BPBCP01]"
I checked Logging folder and found message:
==============[System Error Tracing]==============
[System Name] : OSoftAdminSecurity
[Job Name]     : frmManageUser::GetAllObjectsFromDomainServer
[DateTime]     : 2010-12-06 16:58:43
[Exception]
    DetailMsg : {System.Exception: The server is not operational [BPCP01]
   at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
   at OSoft.Consumers.Admin.Security50.ManageDataSet.GetAllObjectsFromDomainServer(String pDomainName, String pLDAPFullPath, Int32 pDomainObjectType, String pObjectValue, String pDomainType)
   at OSoft.Consumers.Admin.Security50.frmManageUser.GetAllObjectsFromDomainServer(String pDomainName, FILTER_TYPE pOptionType, String pOptionValue, String pDomainType)}
===========[System Error Tracing End ]===========
Any ideas?

The installation was done with a local user or with a domain user?
You know that BPC server can not be in the same time also domain controler.
Are you using Windows authentication or CMS authentication.
If you are using CMS authentication then again you can not add local users.
If you are using Windows authentication then you have to go into server Manager
Options - Define System User Groups
Domain Type - Local Windows
System User Group Name - Local Users.
If you are using Windows 2008 make sure you addrole to have compatibility with IIS 6.because using this module bpc is adding new users.
Regards
Sorin Radulescu

Joining Actuals and Planned Work from Project Server

Hi,
I have an SQL based query which returns Actuals and Planned work from Project Server; however a number of records (generally generic resources based on the ResourceIsGeneric column) are excluded. I believe this is because my Actuals query does not return
generic resources as we are joining both sides of the query on ResourceUID. I have included a snippet below - is there a way to join Actuals and Planned work so I can return all Resource data?
Thanks
SELECT tl.ResourceUID
,tl.ProjectUID
,tl.ResourceName AS [ResourceName]
,CASE
WHEN tl.ProjectName = 'Administrative'
THEN tl.TaskName
ELSE tl.ProjectName
END ProjectName
,ruv.RBS AS [RBS]
,Sum(ta.ActualWorkBillable) ActualWorkBillable
,Sum(ta.ActualWorkNonBillable) ActualWorkNonBillable
,Sum(ta.ActualOvertimeWorkBillable) ActualOvertimeWorkBillable
,Sum(ta.ActualOvertimeWorkNonBillable) ActualOvertimeWorkNonBillable
,CASE
WHEN Sum(ta.ActualOvertimeWorkBillable) > 0
THEN Sum(ta.ActualOvertimeWorkBillable)
END [HOURS]
,DATEPART(year, ta.TimeByDay) AS [Year]
,DATEPART(month, ta.TimeByDay) AS [Month]
,DATENAME(month, DATEADD(month, DATEPART(month, ta.TimeByDay), - 1)) AS [MonthName]
,puv.[Project Status] AS [ProjectStatus]
,ruv.[Primary Role] AS [PrimaryRole]
,ruv.[Resource Department] AS [Department]
,ruv.ResourceIsGeneric
,ruv.[Cost Category] AS [ResourceType]
,puv.[SAP Project Code] AS [SAPProjectCode]
,CASE
WHEN tl.ProjectName <> 'Administrative'
THEN NULL
ELSE tl.TaskName
END TaskName
,puv.[Project Plan Type] AS [ProjectPlanType]
,puv.[GEM Project Manager] AS [GemPM]
,ruv.[Rate Code] AS [RateCode]
,ruv.[Cost Centre] AS [CostCentre]
,ept.EnterpriseProjectTypeName AS [EPT]
,puv.[I DO Phase]
,puv.ProjectOwnerName AS [ProjectOwner]
FROM dbo.MSP_TimesheetActual_OlapView ta
INNER JOIN dbo.MSP_TimesheetLine_UserView tl
ON ta.TimesheetLineUID = tl.TimesheetLineUID
INNER JOIN dbo.MSP_EpmResource_UserView ruv
ON ruv.ResourceUID = tl.ResourceUID
LEFT JOIN dbo.MSP_EpmProject_UserView puv
ON puv.ProjectUID = tl.ProjectUID
LEFT JOIN dbo.MSP_EpmEnterpriseProjectType ept
ON ept.EnterpriseProjectTypeUID = puv.EnterpriseProjectTypeUID
WHERE ta.TimeByDay >= @xDate1
AND ta.TimeByDay < @xDate2
AND tl.TimesheetStatus IN (
SELECT ParamValues
FROM @ParamTable
AND ta.ActualWorkBillable > 0
GROUP BY ...
) TimesheetActual
FULL JOIN (
SELECT ruv.ResourceUID
,puv.ProjectUID
,ruv.ResourceName
,puv.projectname AS ProjectName
,ruv.RBS AS [RBS]
,Sum(abduv.AssignmentWork) AS [PlannedWork]
,DATEPART(year, abduv.TimeByDay) AS [Year]
,DATEPART(month, abduv.TimeByDay) AS [Month]
,DATENAME(month, DATEADD(month, DATEPART(month, abduv.TimeByDay), - 1)) AS [MonthName]
,ruv.ResourceIsGeneric
,puv.[Project Status] AS [ProjectStatus]
FROM dbo.MSP_EpmResource_UserView ruv
INNER JOIN dbo.MSP_EpmAssignment_UserView auv
INNER JOIN dbo.MSP_EpmAssignmentByDay_UserView abduv
ON auv.AssignmentUID = abduv.AssignmentUID
AND auv.ProjectUID = abduv.ProjectUID
ON ruv.ResourceUID = auv.ResourceUID INNER JOIN dbo.MSP_EpmProject_UserView puv
ON auv.ProjectUID = puv.ProjectUID
AND abduv.ProjectUID = puv.ProjectUID INNER JOIN dbo.MSP_TimeByDay_OlapView tbdov
ON abduv.TimeByDay = tbdov.TimeByDay WHERE abduv.TimeByDay >= @xDate1
AND abduv.TimeByDay < @xDate2
AND ruv.ResourceName <> 'Unassigned Resource'
AND ruv.ResourceName IS NOT NULL
AND abduv.AssignmentWork > 0
GROUP BY ruv.ResourceUID
,puv.ProjectUID
,ruv.ResourceName
,puv.projectname
,ruv.RBS
,DATEPART(year, abduv.TimeByDay)
,DATEPART(month, abduv.TimeByDay)
,ruv.ResourceIsGeneric
,puv.[Project Status]
) TimesheetPlanned
ON TimesheetActual.ResourceUID = TimesheetPlanned.ResourceUID
AND TimesheetActual.[Year] = TimesheetPlanned.[Year]
AND TimesheetActual.[MonthName] = TimesheetPlanned.[MonthName]

Hi,
you pasted just part of your query, e.g. is declaration of @ParamTable missing. Without complete query, it is difficult to see, what you are trying to do.
Could you please provide complete query?
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Ping to local domain works but ping to server name dont work from local network PC

Hi
I have done a fresh install of the Windows Server 2012 R2 and installed Essentials Experience role to it.
My problem is that I cannot ping server name from PC in the local network. I can ping local domain name (domain.local).
When I try to ping local domain in the server, it resolutes ok and gives server IPv4 IP but when I ping server name in the server, it gives me IPv6 IP ::1: which I understand to be IPv6 loopback IP. I dont know if this has anything to do with the pinging
problem from the PC.
I had earlier the same server configuration and this earlier server gives IPv4 IP when server name is pinged from the server itself.
How to get PC to ping server name so that I could use http://servername/connect??
Thanks in advance!

Hi,
Have you set firewall to allow incoming ICMP Echo messages ?
By default, Windows Firewall does not allow incoming ICMP Echo messages, and therefore the computer cannot send an ICMP Echo Reply in response.
You may like to refer to the article below to check if it worked:
Nobody Can Ping My Computer
http://technet.microsoft.com/en-us/library/cc749323(WS.10).aspx
In addition, please also provide us the output of ipconfig /all on each side of these machines for further research.
Hope it helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Can I set an OU to have 2 GPO's one to pull updates from local server and another from replica server

I'm looking for a solution where I don't change our current AD groups, (avoid using a local group and a field group), also trying to avoid using a server in a DMZ to handle field people (will need to buy a new server).
At the end i'm looking to use a replica server to push updates from the internet to the field group (or OU with a GPO pointing to such replica server) and use the local server to host the updates locally and push to the office people.
Probably this is the question that needs to be answered, can an OU group have 2 different GPO's pointing to 2 different WSUS servers (local and replica) (local updates vs updates from internet) and if an user of such group is in the office they get updates
from the local server and if he is in the field get the updates from the replica server? I know GPO's can have precedence set to the OU, but do they work like a trigger or something that tells them to go to the next GPO.
Thanks in advance

can an OU group have 2 different GPO's pointing to 2 different WSUS servers (local and replica) (local updates vs updates from internet)
No.
and if an user of such group is in the office they get updates from the local server and if he is in the field get the updates from the replica server?
There are two ways to achieve this. Typically we talk about this scenario when the mobile systems are going to use AU/WU to get Security Updates. Taking advantage of the fact that GROUP policy cannot refresh on a machine which is not "in the office", you
define a Registry Script to run in the user's STARTUP folder, which will set the registry values to configure that client to use the alternate source.
But, in the case where you have an Internet-facing WSUS server in the DMZ, and a Corporate-facing WSUS server on the LAN, you use the SAME URL, but use DNS to direct the client to the correct IP Address. When the client is on the LAN, the LAN DNS gives the
IP Address of the Corporate server; when the client is on the Internet, the Internet DNS gives the IP Address of the DMZ server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

How can I create a fIlter to delete only "junk" from the server?

One of my E-mail accounts is that of a major client. I handle their customer service online. Normally our protocol is to always leave all messages on the server, so for that one Thunderbird account, I have it set to never delete messages on the server.
But the account recently started getting a lot of junk messages. Thunderbird is doing a remarkable job at marking those and placing them in the junk folder for that account. I would like to create a filter that could remove them from the server, preferably those more than "x" days old so I could monitor the activity to be sure that no important message are removed.
I did notice that in "Filters" I can create a custom filter from a header of my choice, but can't seem to create what I want which is:
- after mail is marked as Junk by Thunderbird to delete those messages from the server if they are older than "X" days (my choice of "X").
- not delete any other messages from the server for that account

I believe that did it! Thank you. I am running those changes on a secondary E-Mail address for the same job and server and it appears to be working properly.

Sound only works from one port

My sound only works when I use the output port on the back of my computer, but I'd also like to use the one at the front of my computer for convenience. What setting am I supposed to change to do this? Here is some information about my system.
~ > cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.24.
~ > aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: VT1705 Analog [VT1705 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: VT1705 HP [VT1705 HP]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
My guess is that I want to use device 2 of card 0, so I tried creating a ~/.asound.rc containing
defaults.pcm.device 2
but this didn't seem to do anything.

The "Front" channel isn't the same thing as the front panel. From the ALSA wiki:
"Front, Surround, Center, LFE (subwoofer) and Side (these are the names of the channels with Intel HD Audio, they may vary with different hardware)."
How many sounds cards do you have?
[dspider@arch ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
[dspider@arch ~]$
What are the other HDMI devices? The video card?
And have you tried googling the problem?
http://ubuntuforums.org/showthread.php?t=1462288

Nokia 6600 only works from one cell tower

I have this weird problem with my phone where it will only work off one cell tower. Once I leave the coverage of that cell tower it will not work anywhere else.
It started a few months ago and i'm not to sure why?
The funny thing is it's the cell tower on top of my building at work, so when i'm at work it will work (calls/txt/etc) but as soon as I go home or even go to another city it will not.
Any ideas?

The first thing I'd recommend you do is to reset your phone, but I can't tell from the 6600's webpage what OS you're running so I can't give you instructions on how to do this.
Have a look through your menus to see if you can find an option to reset to factory defaults, but please remember that doing so will wipe ALL data from your phone.
If you wish to backup your data you can do so using the PC Suite application which you can find here :
http://www.nokia.com/pcsuite
Hope this helps.
Regards,
Edward

ARCHIV_CREATE_DIALOG_META FM not working from apllication server?

Hi everyone,
So, earlier I upload photos from my desktop and it worked. But now I have to upload photos from application server, so but ARCHIV_CREATE_DIALOG_META didn't upload the JPG file.
file = ' /server/Photos/HRDEV/picture.jpg' .
CALL FUNCTION 'ARCHIV_CREATE_DIALOG_META'
       EXPORTING
         ar_object                      = ar_object
         object_id                      = object_id
         sap_object                     = sap_object
         file                           = file
       IMPORTING
         archiv                         = archiv
         archiv_doc_id                  = archiv_doc_id
         documentclass                  = documentclass
       EXCEPTIONS
         error_archiv                   = 1
         error_communicationtable       = 2
         error_connectiontable          = 3
         error_kernel                   = 4
         error_parameter                = 5
         error_scanqueue                = 6
         canceled_by_user               = 7.
After that sy-subrc is 1. And data not uploaded into toahr.
Do you have any idea?
Really Thank you.
Mark

There is no ARC_DOC_ID parameter for this function module. It turns out that the problem was the file path. The Content repository settings for the basic path had been set in mixed case which caused problems. The path needs to match the parameter passed. I recommend entering everything in upper case or lower case and then be consistent with the parameters you pass .. at least on a Windows system .. UNIX like systems need to be case sensitive. Now that I've got that straight I'm getting an exception: SAP.Connector.RfcAbapException: ERROR_ARCHIV. In stepping through the debugger it looks like it doesn't recognize the host which is odd since I can view documents in the repository on that host.

Specific version of jre in .jnlp file and downloading from local server

Hi,
I have couple of questions regarding the specific version of jre in Java WebStart.
1) I have specified the jre version in .jnlp file as below.
<resources>
<j2se version="1.3.1_02"/>
</resources>
When I saw the File/Preferences/Java of Java WebStart installation, there is an entry with the "Product Version" value as 1.3.1_02 as I installed jre also before launching my application. Still it complains as,
The application has requested a version of the Java 2 platform (JRE) that is currently not locally installed. Java Web Start was unable to automatically download and install the requested version. The JRE version must be installed manually.
Error Code 11 (11 Could not locate requested version) returned from server when accessing resource: (http://java.sun.com/products/autodl/j2se, 1.3.1_02)
When it is there already, why it is trying to get from the Sun's site.
2) I want Java WebStart to download the specified version of jre from my local server, I specified this in the following way,
<resources os="Windows">
<j2se version="1.3.1_02" href="http://host:9095/j2re-1_3_1_02-win.exe"/>
</resource>
I got the error saying,
Bad MIME type returned from server when accessing resource: (http://host/j2re-1_3_1_02-win.exe, 1.3.1_02) - application/octet-stream. where host is my server name. What I need to do here.
Can I have multiple resource tags one for each os.
Help is highly appreciated.
Thanks,
Sreedhar.

Hi Sreedhar,
There are some other useful threads in this forum on this topic:
the "Automatically Installing the IBM JRE 1.2.2" thread has tips from somebody who's put together auto-download of JREs from his own web site:
http://forum.java.sun.com/thread.jsp?forum=38&thread=71061
Also, the behavior of the j2se tag is discussed a little in the "Using a specific JRE" thread: http://forum.java.sun.com/thread.jsp?forum=38&thread=158075
The first step is to add an href attribute to your j2se tag. I was just experimenting with this this afternoon,
and it appears that unless that href is specified (even if it's the java.sun.com default autodl URL!) JWS will not properly check locally-installed 1.3.1 JREs. Once you include Sun's autodl URL as an href, JWS will at least properly enforce the product version among locally-installed JREs. Of course, Sun doesn't actually include 1.3.1 in its autodl section, so it won't download it for you, but it will enable checking of the JREs already installed.
The second step is downloading JREs from your own web site, which is more complicated and explained better by other messages in the forum. But basically, JWS is not simply looking for a .exe installer for a particular JRE. It hits the webserver with a query and expects the webserver to give it back an installer's JNLP file. Look at the referenced threads for more details.
Jim

Vtext no loger working from mail server.

any [email protected] is no longer working from our nagios server.
Jan 5 06:41:54 postfix/error[10516]: 418881FEF: to=<[email protected]>, relay=none, delay=193616, delays=193616/0.02/0/0.02, dsn=4.4.2, status=deferred (delivery temporarid: lost connection with smtp-sl.vtext.com[69.78.67.53] while receiving the initial server greeting)
Please advise?
-Dion

I never recieve the text messages and they get stuck in my message server queue.
As soon as I try to connect I do not recieve a helo message.
I try to telnet on 25 to your message server
root@# telnet smtp-sl.vtext.com 25
Trying 69.78.67.53...
Connected to smtp-sl.vtext.com.
Escape character is '^]'.
Connection closed by foreign host.
root@#

InvokeODI webservice is not working from Weblogic Server 11gR1

Hi,
We have deployed axis2 (1.2) with invokeodi service to weblogic server 10.3.1.
We have a BPEL process (using Jdeveloper/SOA 11gR1) which is invoking the invokeOdi webservice to
invoke a scenario. The invoke is failed with the following fault.
"Unable to access the following endpoint(s): http://www.oracle.com/"
Complete Stack Trace:
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault} parts: {{ summary=oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): http://www.oracle.com/ ,detail=Unable to access the following endpoint(s): http://www.oracle.com/ ,code=200 } at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:301) at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:935) at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.handleNormalInvoke(BPELInvokeWMP.java:440) at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:182) at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:140) at com.collaxa.cube.engine.CubeEngine._performActivity(CubeEngine.java:2675) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2558) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1256) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:188) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:285) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4607) at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:828) at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:610) at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:354) at sun.reflect.GeneratedMethodAccessor697.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37) at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54) at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy181.handleInvoke(Unknown Source) at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:73) at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:34) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:139) at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:58) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619)
FYI, this is working fine with OC4J 10.1.3.4.
Any help is greatly appreciated.
Thanks in advance.
Thanks & Regards,
Rama Krishna. P
Edited by: user4477725 on Aug 19, 2009 12:17 PM
Edited by: user4477725 on Aug 19, 2009 12:39 PM

I have developed one web application using Autocompleteextender ajax control and used webservice to get the values.
It is working in local system where i can enter some text in textbox and it will show related word sear list in dropdown.
But after hosting in production server, some time like 1 hr or 2 hr it will work. Then it will stop working means if i type test in text box i will not get the list related to entered text.
Where exactly the problem. Even i have added webreference of that service. Then also sometime it will work and after some time it will not work
How to fix this issue. Please suggest me.
Thanks in advance.

Applet only works from local server

Similar Messages

Maybe you are looking for