AppleTalk: HP Color LJ 3550 not working in Snow Leopard, 10.6

We have a HP Color Laser Jet 3550 in our office. The way it is set, we have enabled HP Direct Printing, LPD, and AppleTalk. With 10.5 all of the Macs we had in the office were able to connect to it via AppleTalk.
I have always rooted and applauded Apple's great example of making everything work.
What I do not understand, is how, being the same computer, having the same connectivity to the internet, now that it has a more 'robust' system upgrade, as is Snow Leopard, this connectivity through AppleTalk has been lost.
Probably it is true that most people do not have this issues, but most government and large institutions will see as a problem when their employees cannot print to otherwise still useful printers.
I find this as a fault on Apple's side. Yes, it is an old printer, but how an older system (Leopard, 10.5.8) is able to do this, yet the newest version, does not?
Any help and instructions, on successfully connecting to an HP Color Laser Jet 3550 would be greatly appreciated.

Thank you.
I've been reading a bunch of sites with the same information.
You're correct that it has been deprecated, however, that does not solve the issue. It would be great if plenty other software was deprecated, but it seems like that does not solve issues.
I have read plenty on HP and other forums. But I'd like to ask anyone in these forums If they have encountered the same issue and have been able to get it to work. I have tried one way and another,but they don't seem to make it work

Similar Messages

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

WxPerl not working in snow leopard

Hello,
wxPerl seems to be not working in Snow Leopard.
The command:
wxPerl -e "use Wx;"
Gives:
Can't find 'boot_Wx' symbol in /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level/auto/Wx/Wx.bundle
at -e line 1
Compilation failed in require at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
Is this a known bug ? Is there a work-around ?
Regards.

Thanks!
I did both of what you suggested (and provided very detailed specifics of the wxPerl broken code) and was told:
1st Case (Feedback): No response to my feedback
2nd Case (ADC bug report): No response after obtaining an ADC account and filing a bug report
Next, I wrote a letter to Apple, addressed to the "Macintosh Software Development Manager," providing details of the wxPerl broken code problem, the "Problem Details and System Configuration" error log from one of the many failures while trying to launch the TivoTool 0.7.0 application, remarked on the length of time that this wxPerl code has been broken (broken in 10.5.x & 10.6.x software releases) and detailing how this is disabling the TivoTool application and any other user that is dependent on wxPerl functioning. I asked that a trouble report be opened, the problem resolved, and the fix be made part of a software update. Additionally, I requested an estimated date for this resolution to be included in a software update.
I also sent a copy of this letter and enclosures, along with a cover letter, respectively addressed to Mr. Steve Jobs, asking that he provide the proper resources to clear this long time defective code.
Within a couple of weeks (on March 5, 2010) I received a telephone call from an Apple Executive Contact (named "Nate"), due to the letter addressed to Mr. Jobs. After gathering details on the broken wxPerl code, he promised to contact the software development folks and get back to me with his findings. Within a week of this initial contact, he again telephoned (on March 9, 2010) to say that he had contacted the software development folks, provided the information from my broken wxPerl report, that a trouble ticket was opened on the wxPerl broken code problem, and that the wxPerl broken code problem appeared to be a "low runner," e.g. not many users had reported the wxPerl broken code. Additionally, since the broken code was a "low runner," there was no target date to fix the wxPerl broken functionality.
He suggested, until the wxPerl broken functionality was resolved, that I might want to keep a 10.4.x System hard drive available, so that when I needed the wxPerl functionality, I could boot my Mac under 10.4.x, perform my wxPerl work (e.g. use TivoTool), and then re-boot again later, under 10.6.x to use the TivoTool obtained files.
He also suggested that I make sure that the Software Update System Preference be enabled to automatically check for updates ("Scheduled Check" tab). He added that I shouldn't rule out that the wxPerl broken code functionality might one day be resolved through a Software Update.
I was given a case number, for future reference and to allow me to check the status of my wxPerl broken functionality trouble report.
As my dad used to say, "That's all she wrote."
So, because this is a "low runner" (e.g. not many people have noticed and reported the broken wxPerl code), I'd be surprised (but very delighted) to see a wxPerl fix delivered by Apple in the near future. After all, wxPerl has been broken since leaving Mac OS 10.4.x (wxPerl broken in 10.5.x and 10.6.x software releases).
I last spoke to Nate regarding this issue on Mach 9, 2010.
I have not included Nate's telephone number out of a courtesy to Nate, as he is not a technical person, only a contact that handles issues which have been escalated to Apple executives.
The Apple Case Number assigned was: 153683921
Regards to all involved and all effected.
Thanks -
- Dale

Are mobile internet USB devices still not working on Snow Leopard?

Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
This is an alert at the site
Mac OS X 10.6 Snow Leopard Support Coming Soon
Avid/M-Audio working closely with Apple to offer support for OS X 10.6
Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
Thanks Steve

I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

Transparent PNG not working in Snow Leopard w Final Cut 3.5&4

I recently changed from a G5 mac to a Mac Pro. I had FCE HD 3.5 which supposedly is not supported in Snow leopard..although it did work.
Anyways, when dragging a PNG or PICT image to the base video layer, then dragging a transparent background(white)character image to a layer on top of that...I remember when i was in Macos X Tiger with FCE 3.5, after selecting the top layer and setting composite mode to SCREEN.. it would perfectly make the white background transparent. Awesome..
Well that hasn't worked since i switched to Snow leoplard. I thought it was a problem because i had FCE 3.5 so i bought FCE 4 yesterday
So i decided to upgrade and still doesn't work.
Instead of getting a transparent BG.. the top video layer where i placed the PNG image of a character with a white bg still has the white bg..and the inside of the character is semi transparent..
not what i want.
I even tried the new feature in FCE 4 where you go to Modify and Sepect ALPHA white. and that didn't work either.
What's going on.. ONly specific PNG formats have transparency in FCE???
By the way I'm exporting PNG out of a 3D program called DAZ Studio 3.That program doesn't have the ability to export as Animation CODEC( like in poser)or any other codec for that matter. it only exports movies as MOV or image series PNG or single PNG images.

Hi -
Here is a correctly formated PNG file with transparency.
You can download it to test in your sequence by Control-Clicking and selecting "Download Linked File As . . ." from the drop down menu [HERE|http://www.spotsbeforeyoureyes.com/Test.png]
You simply need to place it on a video track above any other clip to see if the effect works or not.
Please post if this graphic works for you.
MTD
Message was edited by: Meg The Dog

HP LaserJet P1005 not working with Snow Leopard

Has anyone managed to get this printer to work with Snow Leopard 10.6? I have installed the latest drivers* from the HP website which BTW do not say they support 10.6 , see http://is.gd/2DfcE
*Not sure exactly what the version number of the drivers is. The website says they are version 1.0.7, but when installed they show version 1.0.6
I either get nothing coming out of the printer or an error "PrintJobMgr quit unexpectedly - This report will be sent to Apple automatically".

From this web page:
Here are some troubleshooting steps you can use if there is an issue:
Ensure the printer is connected, has power, has ink / toner, paper, and no alerts on its built-in display.
Network based printers should be on the same subnet; you shouldn't have to worry about this if your printer is on your home network.
Use Software Update for the latest available updates.
Delete the affected printer from Printer & Fax System Preferences, then re-add the printer.
If the issue persists, reset printing system as described below, then re-add the printer.
If the issue persists, contact the printer vendor and/or visit their website for printer software and support.

Address book and ical not working for snow leopard clients

We have upgraded our server to mountain lion from snow leopard.
At first glance all appears to have gone well, however, the ical and address book services don't appear to be working for snow leopard clients. These services DO appear to be working for lion clients.
Any ideas?
Thanks.

I am at work right now and don't have access to my Mac. But I need to as if your Dad is on Windows Active Directory network? I also found these directions for Princeton's 2010 Exchange that might help. Did he set up the Address contacts & iCal Calenders were enabled when setting up the account in Mail?

BUG: Chord Grid Libraries not working in Snow Leopard 10.6.1

Hi,
I have Logic Pro 9 installed both on my Leopard and on my Snow Leopard partitions (both are full installs).
Chord Grid Libraries (I mean, the default one with more than 4500 chords) doesn't work in Snow Leopard.
It works as expected in Leopard.
Already verified the bug with other users over here in Italy
Message was edited by: Simone Coen
added BUG to the subject header

Here I did a workaround:
If you have a 10.5.8 on a Backup Harddisk , start from it, launch Logic9, export the Chord Grids, start again from 10.6.1 launch Logic and reimport this File

Deleting multiple items not working in Snow Leopard

I can select multiple events from a repeated event, and when I hit Delete to delete them, iCal correctly pops up a message asking if I'd like to delete only these events, or all future events. I hit "only these events" and it only deletes one item. My event is set up to repeat every week on Monday-Friday.

Finally got my Konica Minolta Magiccolor to work with Snow Leopard 10.6.1. What I had to do was go to the EU site and I found the Magicolor 2430DL driver that was newer than the one I was using in Leopard. The version you need to get is 1.8.1 and set it up as a HP Jetdirect - Socket and use an IP address that is on the same segment as your computer. Leave the queue name blank. Below is the link I used to find the driver. Select Magicolor 2430DL and it will load a lot of pages. The driver and instructions were on section 201 - 250. It was labeled as working with OS X 10.5 .
http://download6.konicaminolta.eu/konmin/public/&&BPE&EN&&&&&&0&&&0&&0&&0

Color profiles not working in snow leopard 10.6.2

I have got a new imac 27inch running snow leopard 10.6.2. It replaces my old Powermac G5 with 10.4 Since 10.1 (bought in 2002)I have had a photoshop/epson 9600 workflow doing all color management in photoshop and selecting no color management in the print driver. In 10.6.2 the colors on screen are fine but the printed output is very wrong it looks like the paper profile is being stripped out and replaced by srgb or something. What has apple done with color management in snow leopard and how can I get my print color back as the prints I now produce are unsaleable and I printing is my livelihood.

I am having the same problem. With ColorSync color management on, the prints come out muddy. If I select Canon for the color matching the prints turn out much better, but they're still a bit red. I'll be interested to see if they get this fixed.

HP 8150N Printer still not working with Snow Leopard

I went to the Hewlett Packard page for a new driver and was told the new driver for my printer was included in the Snow Leopard update. I'm sure it is, but my computer can't find the printer. I've used advice from other discussions and tried what I could with the "Print & Fax" feature on my computer, but so far, nothing works. The printer to a network with two other computers in my office. Any suggestions would be helpful. Thanks in advance.

I believe this to be a "generic" statement since the support agent did not know what your problem was. I have double checked, and there are no known issues with the driver for the 8150n (at least none that engineering has been informed of and is working on).
I fully believe the problem you are experiencing is due to the lack of AppleTalk in Snow Leopard.
First print out the IP address of your printer by printing the configuration page. You may also be able to get this information on the front panel if you dig.
Second, open up the print and fax control panel and click the + button to add a printer. In the add printer window that opens, select the IP button at the top, choose the protocol of HP JetDirect - Socket, and then type the IP address of the printer. If the OS automatically selects the right printer driver (and not Generic PostScript) you are good to go. Click Add Printer and happy printing.
If it doesn't auto select the right printer then your printer probably does not have an IP address that is routable from the Mac. The easiest way to get the printer to grab a new IP address is to cold reset it. Cold Reset the printer by powering it down and then powering it back up while holding down the GO button.
This should force the printer to grab a new IP address. Follow the above steps again to add the printer, and away you'll go.
One drawback of this method is if you have a network that keeps changing and a DHCP server that doesn't reserve IP addresses for devices it is possible that the printer at some point in the future updates its IP address and is no longer reachable. If this happens, simply repeat the steps and you'll be all set. The other alternative is to assign a static IP address to your printer, but that takes a bit more work.
Just trying to help.
Andrew

DocRef.name not working in Snow Leopard

I have been using this script fot sometime to add the Image Name/number to my images, so customers can see them on the images. But today, i noticed that my numbers are not working.
all of the sudden it will take the image name and leave off the last number, so it should show the document name/number and its wrong.
like the images are named..
8290-020.jpg and it shows 8290-020.jpg
8290-021.jpg and it shows 8290-021.jpg
8290-022.jpg and it shows 8290-02.jpg
8290-023.jpg and it shows 8290-02.jpg
8290-024.jpg and it shows 8290-02.jpg
then next time i will run it and get different results...
Can anyone look at this script and tell me why it doesn't work now and how to fix it? i'm using the latest version of Snow Leopard and PS CS3. thanks in advance...
if ( documents.length > 0 )
This script will add copyright information and filename on a text layer
// set units to pixels
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.PIXELS;
try
// add art layer
var docRef = activeDocument;
var artLayerRef = docRef.artLayers.add();
artLayerRef.kind = LayerKind.TEXT;
// ============= Personalize your values in the section below ============
// Copyright info © Leif Photography
var myCopyrightText = " ";
// select opacity
artLayerRef.opacity = 100;
// select the text colour
var newColour = new SolidColor();
if (docRef.mode == DocumentMode.CMYK)
newColour.cmyk.cyan = 255;
newColour.cmyk.magenta = 255;
newColour.cmyk.yellow = 255;
newColour.cmyk.black = 0;
if (docRef.mode == DocumentMode.RGB)
newColour.rgb.red = 255;
newColour.rgb.green = 255;
newColour.rgb.blue = 255;
artLayerRef.textItem.color = newColour;
// select the font name
artLayerRef.textItem.font = "ArialMT";
// select the font size
artLayerRef.textItem.size = 10;
// select the text position - this can be an absolute value too, eg. (10,20)
artLayerRef.textItem.position = new Array(docRef.width / 2, docRef.height *0.05);
// select the text justification
artLayerRef.textItem.justification = Justification.CENTER;
// ============= Personalize your values in the section above ============
// add text item on the art layer
var textItemRef = artLayerRef.textItem;
// text contents is copyright info + filename
textItemRef.contents = myCopyrightText + docRef.name;
// dereference pointers
docRef = null;
artLayerRef = null;
textItemRef = null;
myCopyrightText = null;
newColour = null;
catch( e )
// received and error ... throw it back to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
preferences.rulerUnits = originalRulerUnits;
else
alert( "Open a document first." );

This isn't quite correct! The 'booklet printing' facility was present (and worked - I've just checked it!) in Leopard (10.5); but, as with some other useful functionality, was lost on installing Snow Leopard (10.6).
I suspect that it is a print driver function and that (since I'm using an HP laserjet) it will be up to HP as to when, or even if, they choose to reinstate this very useful function.
Come on HP: let's have it please!

Some Videos and Games Do Not Work, Mac Snow Leopard

This is a problem I have actually had for a while, but it never really affected much that I considered important. Now it is just getting annoying.
Basically, certain video players and online games do not work. Most video players outside of YouTube will not work. The player will load, but the video never does. For example, the most recent video I have had trouble with is the Nickelodeon video player for The Legend of Korra. When I try to watch that, I get a black box, and a “Loading” type image pops up, swirls around once, and then disappears. After that, the whole thing becomes unresponsive. This is typical of many, but not all, video players I have encountered on the web.
I am not sure if it is related, but I have also had trouble with various games. Often time, they will work fine until reaching some transition point, such as the end of a level, and then they will become unresponsive. A good example here is the game Bloons Tower Defense 4. This is a game I know was responsive on my older system. But now, when it loads the level, it freezes up before loading the available towers to place and becomes otherwise unresponsive.An example is shown below. The top-left question mark box in the right-hand sidebar should reveal a dart monkey, and my starting money should be filled, but instead the game hangs up. I have had similar hang-ups on a number of games, so I am certain the problem is not just with this game.
As I said, I have had this problem for a while now. I have upgraded both Flash and my browsers a number of times since they started. I have these problems in all my browsers (Safari, Opera, Camino, Firefox), so it seems to be a problem with Flash. I have also tried uninstalling and re-installing flash and disabling all other browser plug-ins.
I am using a MacBook Pro with Macintosh OS X 10.6.8 Snow Leopard, 2.53 GHz Intel Core i5, with Flash 11.2.202.233. Current Browsers: Firefox 11.0, Opera 11.61, Camino 2.1.2, Safari 5.1.5
Any ideas what I could be overlooking?

Hey, it is getting them to work. Although I still have the “URL Not Found” error on BTD, and I get a whole different debugger error on Korra. But none of the errors prevent the associated items from working. Hopefully this will work in the other places I have had trouble with.
Anyway, the new error for Korra was:
Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: http://pixel.quantserve.com/api/segments.xml?a=p-94wNw88f65Rhk
    at com.mtvnet.reporting.agents::QuantcastReporter/sendDemoData()
    at com.mtvnet.reporting.agents::QuantcastReporter/onCustomData()
    at org.osflash.signals::Signal/dispatch()
    at com.mtvnet.reporting::ReportingManager/dispatch()
    at com.mtvnet.reporting::ReportingManager/onCustomData()
    at com.mtvnet.mediaplayer.view::ReportingMediator/onRegister()
    at org.puremvc.as3.multicore.core::View/registerMediator()
    at org.puremvc.as3.multicore.patterns.facade::Facade/registerMediator()
    at com.mtvnet.mediaplayer::ApplicationFacade/registerMediator()
    at com.mtvnet.mediaplayer.command::ModelPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnet.mediaplayer.command::InitializeCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnet.mediaplayer.model::ConfigLoader/onReady()
    at com.mtvnet.mediaplayer.model::ConfigLoader/set xml()
    at com.mtvnet.mediaplayer.command::LoadConfigCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at com.mtvnet.mediaplayer::ApplicationFacade/startup()
    at com.mtvnet.mediaplayer::MediaPlayerController/onAddedToStage()
    at com.mtvnet.mediaplayer::MediaPlayerController/initialize()
    at com.mtvnservices.media.as3player.view.mediator::MediaPlayerMediator/initPlayer()
    at com.mtvnservices.media.as3player.controller::InitPlayerCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnservices.media.as3player.controller::ViewPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at com.mtvnservices.media.as3player.controller::ModelPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at ConfigLoaderProxy/onConfigLoad()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()

AppleTalk: HP Color LJ 3550 not working in Snow Leopard, 10.6

Similar Messages

Maybe you are looking for