Applications does not come up as a folder in Finder.

How to get Applications besides in Volume?  For years all I needed was Finder.

Double-click the boot volume Desktop icon (Finder->Preferences->General->Enable Show Hard Disks), set the window that pops up in list view, and you should see something like this:

Similar Messages

  • TS1389 I cannot get authorize my computer to play. It does not come up anywher ehta ti can find. Help.

    i AM TRYING TO GET A NEW COMPUTER AUTHORIZED TO PLAY MY ITUNES LIBRARY. WHEN I SIGNED IN TO MY ACCOUNT I WENT IN AND DEAUTHOIRED AAL TO GET RID OF MY PREVIOUS EQUIPEMENT. NOW IC ANNOT SEEM TO AUTHROIZE THIS COMPUTER. HELP PLEASE!
    WTSVEGAS

    When in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.

  • Second time application does not come - JWS hangs silently

    Hi Guys,
    I am using jdk1.6.02,Eclipse. When i launch my application for first time through JWS, downloading of files takes place,application is launched successfully. When i launch my application second time, JWS splash screen comes and disappears silently without raising error Message. Nothing happen after that.
    On other hand i can launch application as many time through Eclipse.
    I looked at logs C:\Documents and Settings\....\Application Data\Sun\Java\Deployment\log but no clue why this is happening..
    Can someone suggest What i need to do inorder to make sure application comes successfully second time as well? Where errors for JWS located on system?

    Do you have a testcase can send to me? I would take a look to see if it is bug in Java webstart code, is this problem only apply to one application? or do you have any trouble to run other Java webstart application using JRE 1.6 u11? Another option is trying to run early JRE 1.6 release, such as 6u10 or early.
    My email is [email protected], thanks for your help.

  • HT5840 using finder to locate an item, item does NOT come up so to upload or find

    in finder, attempting to search for an item and/or to upload. only a non-selectable line item will appear and nothing on the view screen. Not a problem before maverick upgrade.

    aha!
    Wed Feb 14 12:29:16 2007
    PUSH:
    Received control message:
    'PUSH_REPLY,
    route 192.168.100.3 255.255.255.255,
    route 192.168.1.0 255.255.255.0,
    route 192.168.3.0 255.255.255.0,
    route 172.16.0.0 255.255.0.0,
    route 10.123.123.0 255.255.255.0,
    redirect-gateway,
    dhcp-option DNS 172.16.70.12,
    dhcp-option WINS 172.16.70.2,
    dhcp-option DOMAIN timberline.int,
    route-gateway 172.16.70.254,
    ping 10,ping-restart 120,
    ifconfig 172.16.70.216 255.255.255.0'
    The ifconfig line the server is pushing is not right. That is meant for a point to point connection. That is why the local client is puking on it...it is not correct. At least for a tun type device. If it was a tap, then it would be fine.
    http://openvpn.net/man.html
    (look for "--ifconfig l rn" )
    so.... change the line to dev tap, and then do this stuff..
    http://wiki.archlinux.org/index.php/OpenVPN_Bridge

  • HT201250 time machine application does not open

    Tried to open Time Machine but the application does not start up.
    Software is up to date.
    Preferences are set to "on" with oldest backups from November 2011 and plenty of room left on external hard disk unit.
    Need some tips or tricks to be able to search a recent backup for missing files.
    thanks!

    Please try each of the steps below that you haven't already taken.
    Step 1
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Click the Clear Display icon in the toolbar. Try again to enter Time Machine. Post any messages that appear in the Console window – the text, please, not a screenshot.
    Step 2
    Open the backup volume in the Finder. You should see a folder with the name "Backups.backupdb". You should not see a file with a name ending in "sparsebundle". If you do see that, the backup was created over a network and can only be used that way.
    Step 3
    Launch Disk Utility and select icon of the backup drive in the pane on the left (not any of the volume icons below it.) At the bottom of the window, you should see this:
    Partition Map Scheme : GUID Partition Table
    If the partition scheme is anything else, the drive has to be repartitioned (with the loss of all data.)
    Step 4
    In the Finder, select Go ▹ Go to Folder... from the menu bar, copy the text on the line below into the box that opens, and press return:
    ~/Library/Preferences/com.apple.finder.plist
    Move the selected file to the Desktop, leaving the Finder window open for now.
    Relaunch the Finder by selecting  ▹ Force Quit... from the menu bar, then selecting Finder and pressing return. Your Finder settings will be lost.
    Try again to enter Time Machine. If you still can't, put back the file you moved to the Desktop, replacing the newer one that will have been created in its place.
    Otherwise, close the Finder window you opened and delete the file you moved to the Desktop. Recreate your Finder preferences.
    Step 5
    Boot in safe mode by holding down the shift key at the startup chime. Try again to enter Time Machine.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.

  • I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
    To get all your content off your connect your iPad to your new computer.
    Then use a 3rd party piece of software to transfer your content
    I have found Senuti useful but there are others listed in the article I linked to in a previous post.
    https://discussions.apple.com/docs/DOC-3991
    That will let you transfer your non purchased content
    For Purchased content log in to iTunes on the new computer
    In Itunes Store click on Purchased under the Quick Links section on the right.
    Download any music by clicking on the cloud button

  • Deployed application does not contain javascript files

    Hello,
    I am a unexperienced user of the BPM Studio. When I start my application in Oracle BPM my application does not contain the javascript files. It is quite weird, because the path to the .js files is proper - the application works on other computers. I have observed several weird things:
    - when I lookup the application in Firebug, when I try to lookup the source of the .js files, firebug console presents something like this (i deleted most of the html so that it is easy to read):
    <html><head><title>Apache Tomcat/5.5.15 - Error report</title>
    <body>HTTP Status 404 - /workspace//webRoot/webResources/js/jquery-1.4.2.min.js
    Status report message /workspace//webRoot/webResources/js/jquery-1.4.2.min.js
    The requested resource (/workspace//webRoot/webResources/js/jquery-1.4.2.min.js) is not available.
    <h3>Apache Tomcat/5.5.15</h3></body></html>- as i said - the application works just fine on other computers, without having to edit the path to the .js files
    - the application doesn't deploy the application (at least I think it does not) in the OraBPMStudioHome - the application is in the following folder:
    C:\Users\<username>\AppData\Local\VirtualStore\Program Files\OraBPMStudioHome\webapps\workspace\webRoot
    I am using OracleBPM Studio 10gR3, my system is Windows 7 Proffessional 64bit. Could the fact, that my system is 64 bit, cause the error?
    I haven't changed anything in the web.xml, workspace.properties files.
    It looks as if the server didn't include my js files. What may be causing this? I tried to locate the folder where the Tomcat Server deployes the application, and copying the js files where they should be manually, but that didn't work out well - the web application still does not see them.
    By the way, the double // slashes in the path to the .js file are fine on other computers, but is that proper?
    My application uses other scripts, not only jQuery, so changing the link to the jQuery file, won't work.
    I'd be very happy for any solution, thanks in advance!
    Chris Mejka
    Edited by: 789731 on 2010-08-20 01:20

    Nope, that's not the case; all the imports are handled by the <fuego:webResources /> tag, like this:
    <script type="text/javascript" src="<fuego:webResources relativePath='js/jquery-1.4.2.min.js'/>"></script>If that helps, the folder structure, with the .js files is as follows: ../webRoot/webResources/js/ ....
    As I said before - none of my colleagues, who use this application, has this problem, the application runs fine on other computers. The only (or at least that's what I think) difference, is that I use a 64 bit OS... Maybe that's the problem? Or maybe something is wrong in one of my BPM configuration files?
    Edited by: 789731 on 2010-08-20 02:29
    Edited by: 789731 on 2010-08-20 04:42

  • Host Command does not come back

    Hi,
    I have treid to export schema by pressing a button, (form designed in Form10gR2 and excute via Application Server R2. )
    For this I have applied one by one these syntaxes
    1) host ( 'cmd /C start "" "'|| exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
    2) host ( 'cmd /C exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
    3) client_host('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
    4) WEBUTIL_HOST.NONBLOCKING('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
    When my client/ user executes the command, session goes hang and application screen does not come back. If I execute the exp command directly from the Application Server Command Prompt then exp works.
    Please help me, what is the syntax to get the dump wihtout hanging the session.
    Database 11g Linux
    Application Server 10R2 Window2003.
    Developer 10gR2.
    Client Windows , Explorer, FireFox etc.
    Regards.
    Priya.

    Hi Priya,
    It is always a better practice to call a batch file using the host command instead of hardcoding the command inside form. Which would help you to modify the batch file for any changes, without re-compiling the forms.
    In this case, create a batch script, which would set the ORACLE_HOME etc (to make sure the exp command is recognized, you need to add the DB ORACLE_HOME/bin to the PATH), and then call the command to export. You can also parameterize the batch script and pass the parameters from form, separated by space.
    -Arun

  • ICF SERVICE NODE FOR THE APPLICATION DOES NOT EXIST.

    Hi All:
    i am getting the following error when trying to execute my applications in abap webdynpro.
    The following error text was processed in the system BIS : WebDynpro Exception: ICF service node for application  does not exist
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RAISE of program CX_WD_GENERAL=================CP
    Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    can anybody help me out.
    relevant answers will be awarded...
    Regards:
    Arun

    Hi,
    see the information on ICF service nodes <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">here</a> and also take a look at SAP notes 517484 and 1009930 and 1008689
    Regards, Heidi
    For information on creating services (if they are not created automatically), see <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm">here</a>
    Message was edited by:
            Heidi von Geisau

  • One of my applications does not open. how can i delete and reinstall, one of my applications does not open. how can i delete and reinstall

    One of my applications does not open. how can i delete and reinstall it?

    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead.  Download Easy Find at VersionTracker or MacUpdate.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
    AppZapper
    Automaton
    Hazel
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them at VersionTracker or MacUpdate.
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • Aperture Does Not Import Videos using IMPORT FOLDER AS PROJECTS

    SOLVED - Aperture 3.2.1 does not import videos using "Import Folder as Project"
    After 2 days of trying to figure this out (actually around 2 hours total) I've finally managed to import all my photos & videos last year. 200 Gigs 54,000 files. First few tries resulted with referenced photos only, no videos. I had no luck with Google, even tried moving a couple of .plist as mentioned from this thread: https://discussions.apple.com/message/11188017?messageID=11188017#11188017 - this worked for some but not for me. Some issues were solved by NOT selecting "Raw Only", this will cause Aperture to skip your videos.
    Thank you to these people who took time to share. In return I am posting my micro contribution to the Aperture Community. FILE > SWITCH TO LIBRARY > then create a new library. You should be able to import your photos with videos in folders.
    I hope this gets into Google soon. :-)

    , I see only the file, where these photos are, not the photo names or thumbs inside the file (Aperture import path).
    You mean in the Aperture Import panel the folder, where the jpegs should be, is empty?
    Then you may have excluded jpegs from import in your "Import Settings".
    Check the above settings in the "Import Settings" options in the "Import Window". I.e-make sure the Raw+Jpeg Pairs option is set to "Both", even if you do not import raws.
    After reassembled all the programs to a new hard drive in Mac Pro
    Is this new Harddrive your system volume? And are the jpegs you wat to import located on this drive? Or are the on another external volume? If yes, how is this volume formatted?
    Have you checked the permissions and ownership of the jpegs?

  • HT5622 i changed my apple id in my computer but the new id does not come up on the i phone when i need to log in

    i changed my apple id   on my computer     on my i phone  my new id does not come up and i cannot log into i tuenes

    You can't without deleting those applications and downloading them from the new ID, which may require repurchasing paid applications.
    (85560)

  • Iwc application does not connect to IM server[JCS6 vmware image]

    iwc application does not connect to IM server[JCS6 vmware image].
    In the iwc application there is in right side menu the buddy list; this always displayed the message: "Connecting..." and in the log there is this message:
    [12 Jan 2009 09:35:02,317] ERROR httpbind [Thread-23] Error opening stream to server: chimaera.varrius.org : 5222
    [12 Jan 2009 09:35:02,317] INFO httpbind [Thread-23] Component specified is not known : chimaera.httpbind.varrius.org
    org.jabberstudio.jso.StreamException: Component specified is not known : chimaera.httpbind.varrius.org
         at net.outer_planes.jso.AbstractStream.firePacketTransferredEvent(AbstractStream.java:697)
         at net.outer_planes.jso.AbstractStream$Input$1.addExtendedData(AbstractStream.java:116)
         at net.outer_planes.jso.AbstractStream$Input.process(AbstractStream.java:204)
         at net.outer_planes.jso.AbstractStream.process(AbstractStream.java:1176)
         at net.outer_planes.jso.AbstractStream.openInbound(AbstractStream.java:950)
         at net.outer_planes.jso.AbstractStream.open(AbstractStream.java:890)
         at com.sun.im.gateway.http.ComponentSession.createStream(ComponentSession.java:558)
         at com.sun.im.gateway.http.ComponentSession.connectAndAuthenticate(ComponentSession.java:307)
         at com.sun.im.gateway.http.ComponentSession$ConnectRunnable.run(ComponentSession.java:714)
         at java.lang.Thread.run(Thread.java:595)
    How can I resolve the problem?
    Thanks in advance.

    Hi,
    Have you configured the IM server for convergence to talk.Refer the following doc for the same - http://wikis.sun.com/display/CommSuite6/Convergence+1.0+Initial+Configuration#Convergence1.0InitialConfiguration-ConfigureIMComponentstoEnableCommunicationwiththeInstantMessagingServer
    HTH,
    Swetha

  • List of planning applications does not appear

    Hello,
    in EAS i create New Rule -> in Rule Editor displays in right pane -> i click on Select outline -> The Select Database Outline dialog box displays -> when i click on +planning -> nothing is displayed: the list of my planning applications does not appear !!
    is this normal?
    N.B : i use hyperion planning V11.1.1.3
    cheers,

    Did you log into the planning application first before logging into EAS, if the planning application service was recently restarted and there have been no logins to the applications then they won't appear.
    As a test log out of EAS, log into one of the planning applications, log into EAS
    Also be sure that the planning applications have been created to use Business Rules and not Calculation Manager if you want to use EAS.
    If you are still having issues then it may be worth having a read of the following document on Oracle Support - "Troubleshooting Hyperion Business Rules Issues [ID 763345.1]"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Preview application does not print images correctly sized

    The Preview application does not show me what size the image will print out.
    It defaults to Scale to Fit: Print entire image.
    The % in the Scale: window seems to be what the % turns out to be, depending on which Scale to Fit: is selected.
    If I click into Scale:, and then change the %, when I hit Return, it prints immediately without allowing me to preview what size the change actually looks like.  Need to change that behavior!!!  Can't see how to do it.
    Probably want the default setting to be Scale: 100% but can't figure out how to do that.
    ALSO the Preferences / Images setting has two choices.
    But playing with the Define 100% scale as just changes the size of the image in the Preview viewing window.  The PRINT menu still has the same default and the same Scale: % size.  No matter which I select, the PRINT default is still the same %.

    OR....
    https://discussions.apple.com/message/10689391#10689391
    choiropiha
    Dec 4, 2009 7:48 PM 
    Preview.app in Snow Leopard has removed the option to print without scaling, and recreating this behaviour with the remaining options is quite complex and requires 4 extra steps. Steps to Reproduce:
    1. Open a document in Preview.app, such as a PDF, of a known paper size.
    2. Select 'File' > 'Print…'
    3. Change the paper size to one where the default scale value with the default 'Scale to Fit:' 'Print Entire Image' is not 100%. This step is often unnecessary, as many documents will require reduction to include margins, even if the paper sizes match.
    4. Select 'Scale:'
    5. Select the scale % value.
    6. Delete the scale value.
    7. Input '100' in the scale value box using the keyboard.
    8. Press tab to avoid radar #7256827.
    9. Click 'Print' Expected Results:
    Click on a single option to print at 100%, if by chance that wasn't the default option. This would have been one step. Actual Results:
    Does what it says. Steps 4 through 8 are necessary to print at 100% in most cases. Regression:
    This behaviour was as expected in OS X 10.5.x and previous versions, or we wouldn't be having this discussion. Notes:
    Printing at 100% is the only scaling that is common enough to warrant a button to make it an easy one to get to. Preview.app itself even has an 'Actual Size' toolbar button, but has removed this function for printing.
    Graphic designers (and other professionals) or specific applications (such as printing on pre-cut or pre-printed paper, labels, or DVDs) can commonly require printing at 100%, and using PDF to distribute documents makes Preview.app the most logical choice for many printing jobs.
    Having something other than 100% as a default can cause expensive media to be ruined by a mis-scaled printout, unless these 4 (+1) steps are followed every time.
    Most other apps, including Safari, Mail.app and TextEdit default to no scaling, making Preview.app an exception. I am an architect and this is really annoying!
    Does anyone know a workaround? 

Maybe you are looking for