HT5840 using finder to locate an item, item does NOT come up so to upload or find

in finder, attempting to search for an item and/or to upload. only a non-selectable line item will appear and nothing on the view screen. Not a problem before maverick upgrade.

aha!
Wed Feb 14 12:29:16 2007
PUSH:
Received control message:
'PUSH_REPLY,
route 192.168.100.3 255.255.255.255,
route 192.168.1.0 255.255.255.0,
route 192.168.3.0 255.255.255.0,
route 172.16.0.0 255.255.0.0,
route 10.123.123.0 255.255.255.0,
redirect-gateway,
dhcp-option DNS 172.16.70.12,
dhcp-option WINS 172.16.70.2,
dhcp-option DOMAIN timberline.int,
route-gateway 172.16.70.254,
ping 10,ping-restart 120,
ifconfig 172.16.70.216 255.255.255.0'
The ifconfig line the server is pushing is not right. That is meant for a point to point connection. That is why the local client is puking on it...it is not correct. At least for a tun type device. If it was a tap, then it would be fine.
http://openvpn.net/man.html
(look for "--ifconfig l rn" )
so.... change the line to dev tap, and then do this stuff..
http://wiki.archlinux.org/index.php/OpenVPN_Bridge

Similar Messages

Press Alt to popup Menu Toolbar, Click on a Custom Icon and the item does not come up AND the Tool Bar closes

Options-->Menu Bar is Unchecked(off) (so, TABS are at the top of the screen):
Press Alt to popup Menu Bar, Click on a Custom Icon and the item clicked on does not come up -and- the Menu Bar closes.
So, Alt->Popup Menu Bar->Click a Custom Icon does not function properly.
see Troubleshooting Info below-->

First off if you have Firefox4 you probably also have an earlier version such as firefox 3.6.15 installed. By default firefox installs these in slightly different locations, but it leaves it up to you to create a separate profile for each version. The profile is where firefox stores data and settings. I am not sure that firefox explains this clearly, but you will run into problems if you do not have a separate profile for each version of firefox. See http://kb.mozillazine.org/Testing_pre-release_versions
To try to get the toolbars working correctly, after you have ensured you have separate profiles in use for each version ( the following action will make changes)
# use the restore default set from the customise / customize toolbars dialogue
# if that does not work then
#* use [safe mode] and the option [X] reset toolbars and controls

Item does not come to delivery screen. VL01N

Dear all,
After I create customer order, I invoice it then I create Delivery.
But some materials does not come to delivery screen(VL01N). Some of the materials ok..
To fix this What should I do?

Hi,
Not sure if I understand your brief description on what you did correctly in the system.
Are there more than one type of item category in your Order (i.e. order-relv. and dlv-relv billing)??
You mentioned you created an Order --> Invoice --> Create Delivery..
Where order-related item is concerned, it will appear in Billing when you reference the Order number.. but where delivery-related billing is concerned, the delivery should be completed (i.e PGI) and then billed accordingly (using delivery number as reference)..
Hope this helps.
Rgds.

How do I add an app to my location services when it does not come up automatically, How do I add an app to my location services when it does not come up automatically

How do I add an app to location services when it does not appear automatically

Have you tried Settings>Privacy>Location Services and see if you can turn it on in there?
Obviously it has to be an app that works with location services so if it is and nothing else works, delete the app and download it again to make it ask again if you want to allow your location to be used with it.

Item does not exist error when updating item

Hi,
I have a list called "Deal" and I have a ItemUpdated event to update the item permission based on a list field "Owner".
I find the code run well with site collection administrator account. If I use a regular user account to edit the item, it throws "Item does not exist" error after clicking save button. But the item is actually updated.
I run the code under debug mode and it does not throw any exception. But the page shows "Item doex not exist" error.
If I retract the solution, the item can be updated normally without any error.
My code and the error message:
public override void ItemUpdated(SPItemEventProperties properties)
if (properties.ListTitle.Equals("Deal"))
base.ItemUpdated(properties);
try
SPSecurity.RunWithElevatedPrivileges(delegate
using (SPSite elevatedSite = new SPSite(properties.SiteId))
using (SPWeb elevatedWeb = elevatedSite.OpenWeb())
SPList elevatedList = elevatedWeb.Lists[properties.ListId];
SPListItem elevatedListItem = elevatedList.Items.GetItemById(properties.ListItem.ID);
// Get Lead owner
SPFieldUserValue uValue = (SPFieldUserValue)elevatedListItem.Fields["Owner"].GetFieldValue(elevatedListItem["Owner"].ToString());
SPUser owner = uValue.User;
bool oldValue = elevatedWeb.AllowUnsafeUpdates;
elevatedWeb.AllowUnsafeUpdates = true;
elevatedListItem.ResetRoleInheritance();
// Break inheritance and clear permissions on list item
if (!properties.ListItem.HasUniqueRoleAssignments)
elevatedListItem.BreakRoleInheritance(false);
// Add permissions for current user
this.SetPermissionsForUser(elevatedWeb, elevatedListItem, owner, "LeadsOwnerPermission");
this.EventFiringEnabled = false;
elevatedListItem.SystemUpdate();
this.EventFiringEnabled = true;
elevatedWeb.AllowUnsafeUpdates = oldValue;
catch (Exception ex)
COMException (0x81020016): Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.<nativehr>0x81020016</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +0
Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +256
[SPException: Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.]
Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) +24356360
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +4064980
Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() +378
Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e) +24
Microsoft.SharePoint.WebControls.SaveButton.OnBubbleEvent(Object source, EventArgs e) +727
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +70
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981

Can you try removing user permissions iteratively.
The sample code will look like this.
//get usernames
string tempFieldValue = listItem["Assigned To"].ToString();
string[] userNameArray = listItem["Assigned To"].ToString().Split(';');
//remove permissions first
web.AllowUnsafeUpdates = true;
listItem.BreakRoleInheritance(false);
SPRoleAssignmentCollection raCollection = listItem.RoleAssignments;
//remove exisiting permissions one by one
for (int a = raCollection.Count - 1; a >= 0; a--)
raCollection.Remove(a);
for (int i = 1; i < userNameArray.Length; i++)
tempFieldValue = userNameArray[i].Replace("#", "");
userName = web.AllUsers[tempFieldValue];
toAddress = userName.Email;
SPSecurity.RunWithElevatedPrivileges(delegate()
//EMAIL USER
bool result = SPUtility.SendEmail(web, appendHtmlTag, htmlEncode, toAddress, subject, message);
//PERMISSIONS
//grant permissions for specific list item
SPRoleDefinition roleDefintion = web.RoleDefinitions.GetByType(SPRoleType.Contributor);
SPRoleAssignment roleAssignment = new SPRoleAssignment(userName);
roleAssignment.RoleDefinitionBindings.Add(roleDefintion);
listItem.RoleAssignments.Add(roleAssignment);
listItem.Update();
i++;
jaik

Duplicate item does not validate it

Hello
when I use F3 key to duplicate a lookup item (has invisible foreign key item) the duplicated item does not fire When-Validate-Item trigger to brings it invisible foreign key, How to solve this problem?

Use a key-dup-item trigger, and in it put:
duplicate_item;
set_item_property(:System.trigger_item,item_is_valid,property_false);
validate(item_scope);Not sure if both of the last two lines are necessary. It may work with only one of them.

Custom item does not appear on Hotsync Menu

I have a Sprint Treo 700p. My work email was converted to Outlook from GroupWise. I am able to sync successfully, but received a message about changing profiles and conduits. I tried to do this by clicking the Hotsync icon in system tray. The menu that appeared only had three items (Settings, Install, Exit). The CUSTOM item does not appear. I am using Hotsync Manager 7.0.2. How can I get back the CUSTOM menu item?
Thanks in Advance,
Corey
Post relates to: Treo 700p (Sprint)

Those Hotsync options are what display on Palm Desktop 6.2.2, not prior versions 4.x.
To get to your Hotsync settings, click the Hotsync icon, and select Settings. Then click Applications. Select the conduit you wish to change, and click Configure.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Item does not exist. It may have been deleted by another user

Hi,
I am getting a strange issue with the error "Item does not exist. It may have been deleted by another user " with the below code which was under "RunWithElevatedPrivileges" in a application page.
public void test(int requestId)
SPList list= web.Lists["test"];
SPListItem lstItem = list.GetItemById(Convert.ToInt32(requestId)); //Error
But when I test the above code in a console application, it is working fine & I am sure the id exist in the list.
Can any one help me on this issue!
Thanks In Advance,
Kumar.

Ok.
Go to the sharepoint list and check the item with id is exist or not?
Retrieve the data using another column instead of id column.
Just for testing.
Check the below way also
SPQuery query = new SPQuery();
query.Query = "<Where><Eq><FieldRef Name=\"ID\"></FieldRef><Value Type=\"Integer\">" + id.ToString(CultureInfo.InvariantCulture) + "</Value></Eq></Where>";

Waiting for approval item does not execute attached procedure !

Hi.
Using 3.0.8 on Solaris.
Create one custom item type and associate one on plsql procedure to be run in place when item is listed within its folder.
Go to folder, add item, look for the plsql result : Good it's working !
After that create an item as a create with approval ACL and come back as folder owner, look at the plsql result : NOTHING !!!
My PLSQL procedure is displaying some attributs in order for the folder owner to approve or not the waiting item. So if wainting for approval items does not execute associated plsql function as they are "waiting" (active=0) then I've got some problems!
Any suggestions ?

Hi all,
Thanks very much for your feedback.
In reply to Brian's suggestions
1. I checked to see if WS14500013 was defined as general task; it was not and this has has now been rectified. Went through the other workflows also.
Double checked the contents of the tables:
APPROVAL_TABLE, ITEM_APPROVAL_TABLE, ITEM_APPROVAL_OBJECT.
All appeared OK.
Created a simple one line SC. Invoked approval preview and the message: 'Approval step without ad-hoc capability. No preview possible' was displayed. This is odd since WS14500015 and sub-workflows do not use AD-HOC approval. Or am I not understanding this correctly.
Followed Smitas suggestions but to no effect.
Here are the contents of the said tables which I lifted from the workflow tables:
Again, many thanks for your responses...
**APPROVAL_TABLE****
NAME="APPROVERLIST:ApproverList:" <APPROVAL_INDEX>0000000001</APPROVAL_INDEX>
<APPROVAL_BRANCH>0000000001
<APPROVAL_AGENT>USMGRR11000
<APPROVAL_STATE>0000000002
<INITIAL_AGENT>USMGRR11000
<INITIAL_INDEX>0000000002
**ITEM_APPROVAL_OBJECT***.
NAME="ITEMAPPOBJTABLE:ItemAppObjTable:" - <item>
<SC_GUID>957117374BC6434882B0BFD5462A2724</SC_GUID>
<APP_CRIT_NAME1>COST_CTR</APP_CRIT_NAME1>
<APP_CRIT_NAME2>ORDER_NO</APP_CRIT_NAME2>
<APP_CRIT_NAME3 />
<APP_CRIT_VALUE1>R11000</APP_CRIT_VALUE1>
<APP_CRIT_VALUE2 />
<APP_CRIT_VALUE3 />
<APPROVAL_OBJECT_GUID>9E6EFAC500B681458284BBB60BF99C8A
*****ITEM_APPROVAL_TABLE***,
NAME="APPROVALITEMLIST:ApprovalItemList:"
<item>
<APPROVAL_OBJECT_GUID>9E6EFAC500B681458284BBB60BF99C8A <APPROVAL_ITEM_GUID>1137519335F51C4DB3D2844A8AD484C0

Item does not match schdule line ( program error ) message no . V1427

*Item does not match schdule line ( program error ) message no . V1427 .* This is the message I am getting when I am trying to display a quotation through VA23 . From here system exits the transaction .
As per my observation , when I compared VBAP and VBEP tables, there are 2 items in VBEP table with schedule lines but the same items are not present in VBAP table. User says he tried to delete these items because there is no quanity , Inspite of that these items appear in VBEP table .
The document is a reservation document where in schedule line category does TOR and availability check.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 5.0 .
What is the best way as this doc has nearly 30 items and nearly all of them have quanity confirmed .
Please provide your valuble inputs ...
Regards
Raghav..

Nitin,
Below are the steps to check
Transaction SE18
Definition name: BADI_SD_SALES
Menu: Implementation -> Overview
double-click on implementation: IM_CORE_CHECK
Now you will get an overview on the methods.
check whether implementation IM_CORE_CHECK is active or not.
If not Press the change button and activate
looking at the your system pack level this should be active. If it is active then the inconsistency must be modified directly at database level through Z report.
Ramesh

Item does not match schedule line (program error)

Dear Experts,
I Transaction VA02/VA03 when i put Sales order number and try to get in to the system system through error and terminate the transaction
ERROR is "Item does not match schedule line (program error)" with Message no. V1427
when i check Table level and analyse thr Debuging i found that
Table VBAP line item 10 is missing and table VBEP line item 10 is there due to this miss match its shows above error
Question
Why and How it happen and how to fix this issue???
Best Regards
hanumant

Check Note 442831 - V1427: Item does not match schedule line (program error)
thanks
G. Lakshmipathi

Item does not match schedule line (program error) in sap

Dear Expert.
Greetings!
We are currently facing with this error (V1 427 item does not match schedule line (program error) in sap), when we open the sales order(VA02/03).
The error is occurring due inconsistency on the database tables, some Item is in table VBEP, but it is missing from table VBAP. This is what is causing the error message.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 6.0 .
Report SD_CONSISTENT_CHECK_EXT and SD_CONSISTENT_CHECK are already available.
Bapi BAPI_SD_SALES is also active.
Please let me know if anybody has any idea on the same.
regards
Praveen

Hi,
Refer the KBA: 1464620 - Error V1427: Item does not match schedule line which explains the reason and the solution for the issue.
Regards,
AKPT

Error System "Item does not exist. It may have been deleted by another user"

Error System "Item does not exist. It may have been deleted by another user" in sharepoint 2010
This is problem show when User new item in List . User open new item page about 3 pages and User save each one page when page save complete , User will save another page.
Sometime User can not save item , it show that error
This List not have workflow and code
Please let me know what is the issue ?

Hi,
Greetings. THis is a known issue and see the links for resolution
http://support.microsoft.com/kb/972225
http://social.technet.microsoft.com/Forums/office/en-US/638e4aa0-527c-4b20-a899-a0cf181983ec/no-item-exists-at-it-may-have-been-deleted-or-renamed-by-another-user?forum=sharepointadminlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks

Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks

*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.

Items does not match schedule line

Item does not match schedule line (program error) - message V1427 getting while accessing the Sales Order via VA02/VA03.
While we see in table VBAP we can see all the line items except the Item number 10 for the order. However, in the table VBEP, we see 5 line items for the Sales Order.
It is not allowing us to enter the Sales Order. Kindly help.
Thanks in advance.
Message was edited by:
Praveen Kumar

Hello,
we've got the same problem.
Because of some changes in an SD-Userexit the problems have been generated.
In our case the SAP-notes can't help to solve the problem with VBAP/VBEP.
I wrote an report which check and delete the excessive positions of both tables.
Hope it helps.

HT5840 using finder to locate an item, item does NOT come up so to upload or find

Similar Messages

Maybe you are looking for