Applied changes on interfaces not processed as updated on scheduler

Dear Gurus,
Scenario
=====
Having problems in implementing a change in specific interface from a package.
How i do it:
1. Done specific changes to an interface from package A(version 001).
2. Test loading and verified loading successful on return rows.
3. Generate a new scenario for package A(version 002).
3. Hence, I have this package B that only perform scheduled loading tasks.
But when Package is executed overnite ( assuming interfaces had been updated, from the ETL diagram had applied changes of package A scenario version had been updated to the new version(002)
nothing actually perform on the interface changed. Checked on edited interfaces is changed as last saved.
Questions
======
-Would updating the agent schedule update the version changes to be executed as well? or
-Is there something else that had been missed by me as far as the 3 steps as mentioned above?
Help and pointers are deeply appreciated :)
Regards,
Terri

Dear Santos,
Sorry for the late reply..
Well let me roughly explain on my scenario in a clearer basis sorry.. :)
Current Implementation:
Package Transaction A & B and Package ETL
Package Transaction below are the functions:
-created several interfaces to perform Loading to sql db(no problems)
-Question arise ere.. say i have modified the interface in this package and applied changes.
Do i need to regenerate this package scenario?
Package ETL
-A Package created to synchronize scenario processes on a daily basis
-So in the diagram would have scenario from Scenario Transaction A connects to Scenario Transaction B where agent schedule
is applied on this Package ETL to process daily updates.
-Questions arises here again.. coz once done the changes on say Package Transaction A on interfaces assumingly done correct steps by applyin changes to interfaces. Do i need to regenerate a scenario for this Package ETL say pre change package ETL is version 001 n post change on specific interface; should i create a new scenario with version 002?
Other probs with ODI
-Regenerate Scenario crashes Dun know wut's wrong?
-Cant seem to remove previous Scenarios?
I know its preety much long winded.. but i'm such a novice in odi..
pointers and advises are truely appreciated :)
Regards,
Terri

Similar Messages

Need different processes for Update and Delete buttons

I'm using a customized version of the Issue Tracker sample application. I've added a table called project_person(project_id,person_id) so that a project can have multiple people assigned to it and so that one person can have multiple projects. I have a form report that lists all of the projects with an edit link which opens one project. On the individual project page, there are page items for each of the columns in the project table and a item for the person assigned to the project--this item is pulled from the separate project_person table. I have two buttons--Delete and Apply Changes. If you click on Apply Changes, the project table should be updated and then the project_person table if the assignment was changed. If you click on Delete, it should delete the project_person record first and then delete the project record. I created a new conditional pl/sql process that updated two tables if 'Apply Changes' button is cliicked. I then created a separate conditional process when the Delete button is clicked. This conditional process checks to see if a record in the project_person table exists, and if so, delete the record. Then delete the project record.
The update process works fine. The delete process reloads the list of projects with a success message at the top without actually doing a delete and I have no idea why. Does anyone have any suggestions?
I am not using the automatic row processing, but should I? Or is it ok to have the two separate conditions for the two different buttons?

Hello again Miah,
Check the "Sequence Number" for your processes. Typically, APEX will increment by 10, each time you create a Page Process as I recall. You can set this to be any number you want; even if you duplicate the sequence number (ie: you can have multiple Sequence 10 processes).
Make sure that your Delete process is firing properly and walk through the logic in the source code to be sure that any "IF" or "WHERE" logic is satisfied. For example:
Begin
delete from emp_table
where 1=2;
End;If this was your page process code - you would receive a SUCCESS message because the PL/SQL code executed successfully, even though nothing will be deleted since 1 will NEVER equal 2.
So, check Delete Source carefully.
{size:14}{color:green}Can you post the code from your delete page process here?{color}{size}
Good luck,
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)
Edited by: dfcii© on Oct 27, 2009 10:55 AM

HT1386 When I try to sync changes from my playlist to my iphone the sync process gets to step 7, applying changes and then freezes up, the changes are not being put on my iphone. What do I do to correct this issue?

When I try to sync changes from my playlist on the computer to my iphone the sync process gets as far as step 7, applying changes, then freezes up and the changes are not getting to my iphnoe. How do I fix this issue?

Are all these songs associated with the same Apple ID or were some purchased on another account?
Are they tagged properly? In the library does it break an album out into several different albums with a few tracks each?
Check your sync settings for each device. Do you accidentally have only certain songs/albums syncing?

HT201272 Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

Will the app run on iPhone3GS. Some of the newer apps require IOS 5 or later. This info should be displayed witht the app in itunes store

I did a system update and now iTunes won't apply changes

Yesterday I ran a couple of updates on my iMac and this morning I tried to remove a couple of books off my iPhone and iTunes won't do it. It lets me access the correct screen and deselect the books that I want to remove but when I hit apply it starts the sync process and the puts checks back in all the boxes of books I want removed. In a related issue...Mail seems to be having a similar problem in that I delete a piece of mail and all of a sudden it shows back up in my inbox. Anyone else having this issue or know how to solve it?

No, it is set up to only sync selected books. But I even tried to just remove all books and not sync any and it won't let me do that. It always acts like it is syncing correctly, then all of a sudden all books I'm trying to remove get selected again.
I have a total of 20 books. 9 books are on the phone. I am trying to remove all but one of them and then add one other that currently isn't on the phone. I tried removing the ones I don't want first and syncing with the intention of adding the one I want after the others are removed. It wouldn't remove them. I tried unchecking the box that tells it to sync the books at all and remove everything and when I hit sync it just reverts back to the checked box and the 9 original books.

Applying presets causes filter settings to get corrupted if process version updated

I have an ongoing problem with Lightroom 5.7 including earlier versions. The problem occurs when editing photos which use previous process versions (ie, 2010). My presets all have the Current Process version checked (as they should). Whenever I apply any preset to a photo, the settings for existing filters get corrupted (reset to 0). This includes my Graduated Filter settings, Adjustment Brush settings and Radial Filter settings. Those filters and their masks remain on the photo but their parameters have all been set to zero. I keep falling into this trap since it's natural to use my presets when making updates to photos. Often I don't realize this occurred until it's too late.
As a work-around (inconvenient) I can first manually update to the current process by right-clicking the photo and saying Settings/Update to Current Process (2012). Or by clicking the Lightening Bolt button in the upper right corner. But this must be done prior to applying any presets and I typically for get as my database has tens of thousands of pics. Even a preset with just the Process Version set will cause the filter settings to be corrupted. I'm not interested in applying a batch or Quick Develop process to all at once since I need to inspect each one as the process is updated. It would be great if this could be fixed in a maintenance release since it keeps biting me. I think it's important that this be fixed in LR 6.0 also. No doubt it's messed up many user's photos without them realizing it. Does anyone know a work-around so Presets can be used?
System: Win7 pro 64 (current), 4.2 GHz i7, 12GB, Lightroom 5.7.

In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob

Apply changes button not working as expected

Hi
I have a page, this page has some fields and a drop-down list where it has a projectname as the values and when I change a value in the drop-down list and click on "Apply Changes" button it does update the table and the changes can be viewed on the page ............. but when I have created a copy of this same page and changed the select statement of the drop-down list and in order to change the year from the drop-down list and click on apply changes then it does not update the table or changes are not reflected on the page.... am I doing soemthing wrong somewhere , but not sure where !
Can anyone know what could be the reason ....?
thanks

Hi Nancy,
That could be the case, but I tried it multiple times during the day and it was not working. I think I would have notice it if I "missclicked" it like 10 times in a row. I normally use this option more than once a day and it works. But If it happen again, I'll pay attention to that.
Thanks!

Process does not perform an update.

I have this PL/SQL process in my page:
UPDATE tag_order
SET order_date = SYSDATE
WHERE order_number = :P16_Order_Number;
COMMIT;
Unfortunately, it does not perform the update. What could be wrong?
FYI: In order to get to the page where this process is located, you first go to a page that contains an Interactive Report region (Page 15). When you click on one of the rows in that report region, page 16 is loaded and the :P16_Order_Number item is loaded with the order number from the report page. I'm not sure if that has anything to do with the problem, but I mention it because :P16_Order_Number is referenced in the update statement. Could it be that its session state is not set?
Any advice would be appreciated. Thanks.

Thanks for your responses. Your answer seems perfectly logical, unfortunately, it did not work.
I made a copy of P16_Order_Number and called it P16_Order_Number_Visible and made it a 'Display as Text'.
Then I changed P16_Order_Number to 'Hidden' The report was already set up to set P16_Order_Number to Order_Number, so nothing had to be changed there, or in the Process that referenced P16_Order_Number, since it is now referencing the Hidden item.
But when I ran it, loaded page 16 and clicked Session, P16_Order_Number had the correct value 172, but P16_Order_Number_Visible had no value, even though its Source has been set to P16_Order_Number and the value 172 was actually displayed from P16_Order_Number_Visible on page 16.
Furthermore, the update did not work. So what is wrong here?
Thanks.

Edit Page;Report;Enable CSV Output;Apply Changes;Page Not Found;wwv_flow

Hi,
We have a really annoying error in our application, whereby we are unable to save ANY changes to report attributes if Enable CSV Output is Yes.
I have many pages with Enable CSV Output set to Yes, and when run, the pages can indeed be exported to Excel, fine so far.
However, if we do Edit Page, choose Report change Enable CSV Output to No, then apply changes the option is removed ok - BUT if we then set it back to Yes, when we apply changes again we get a Page Not Found error at this address ;
http://sglas-sand.fm.rbsgrp.net:7780/pls/fdm_uat2/wwv_flow.accept
We obviously dont need to keep changing this value, but the above demonstrates that our reports do currently support CSV output, but for some recent reason, trying to save a page where this option has been changed to Yes causes this crash.
We also seem unable to change and save any other attribute when CSV Output is set to Yes. This leaves us in a tricky situation - unable to change our pages unless we are prepared to remove the Export option!
We were wondering if the support of this this option requires any special processing / objects / etc to be availble / running. Any help greatly appreciated.
John Nice
Royal Bank of Scotland - Finance IT

Hi Scott,
Thanks for the reply. Our errors were like this in the log ;
[Thu Feb 22 14:52:33 2007] [error] [client <private ip removed>] ] [ecid: 1172155953:<private ip removed>] :30306:0:1855,0] mod_plsql: /pls/fdm_uat2/wwv_flow.accept HTTP-404 ORA-06550: line 23, column 3:\nPLS-00306: wrong number or types of arguments in call to 'ACCEPT'\nORA-06550: line 23, column 3:\nPL/SQL: Statement ignored\n
Versions are ;
Database : 10.2.02
HTMLDB : 2.2
Apache : 10g release 2
Regards,
John
Message was edited by:
John @ RBoS

I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.

Entry was not processed because there is no changing parameter available

Hi,
I'm new to SCM area. Started a development to update the SNP Planner Codes to the Product Master with some code. For this purpose, I'm using the standard bapi - BAPI_PRDSRVAPS_SAVEMULTI2. To use this, according to the documentation of the BAPI, I've passed the Internal Product number (PRODUCT_INT), also, I'm passing Internal Location (LOCATION_INT).
The tables that I'm updating are: PRODUCT_HEAD, PRODUCT_TEXT, PRODUCT_LOCATION.
With the kind of error I saw, I thought of assigning the Model also to the Product. So I've also populated the table : PRODUCT_MODEL with model = '000'.
When I run this BAPI, I get the below mentioned error.
E APO_BAPI 051 Entry was not processed because there is no changing parameter available
There could be another post belonging to the same, but I could not find it so posting this thread.
Regards,
-Syed.

Hi,
For each of these tables that you are trying to update PRODUCT_HEAD, PRODUCT_TEXT, PRODUCT_LOCATION, there will be corresponding X tables like PRODUCTHEAD_X, PRODUCT_TEXT_X, PRODUCT_LOCATION_X.
You will need to populate the particular fields in these X tables with value X so that the particular fields in tables PRODUCTHEAD, PRODUCT_TEXT, PRODUCT_LOCATION are processed.
thanks
Ehsan Ahmed

Change control process for updating the UPK topics

Is anyone using a change control process for updating the UPK topics for JD Edwards EnterpriseOne?
With publishing the whole module and everything linked, I am finding it difficult if a developer is updating a topic and maybe in the middle of it, but has it checked in to the server?
I would like to hear what others may be doing to control this.
Thank you,
Linda Paar
MOM Brands

Hello,
If you have not already joined the UPK community in My Oracle Support, I would recommend you ask your question in that forum as there is a lot of experience there. Additional information can be found in the announcement at the top of this forum: https://forums.oracle.com/forums/ann.jspa?annID=1175
Best regards,
Marc

Data in internal interface not able to be processed

Hi gurus,
We upgrade our R3 server to EHP 7.
After EHP 7 upgrading, I am trying to collect data for 0CO_PC_ACT_10 extractor.
When I enter a filter value to RUN_APPL, I am getting this error: Data in internal interface not able to be processed (Message ID: C+701)
If I leave this RUN_APPL empty, I am getting data without error.,
I tried to reactivate the datasource from SAP R3 system but nothing changed.
It was working correctly before the upgrade.
What should I do ?
Do you have any suggestions ?
Thanks for your help.

Thanks Michael,
We downloaded this note by SNOTE transaction to our R3 Dev. system but its status seems to be not implemented.
Our SAP_APPL version is: 617
1845346 note can be impemented between 600 - 616.
Thanks.

I want to update my credit card info. I have moved to a new country and can not process the payment. PLEASE HELP

i want to update my credit card info. I have moved to a new country and can not process the payment. PLEASE HELP

The same Adobe ID can not be used to make payment if you have changed country. To get complete resolution, please contact Adobe support Contact Customer Care.
Regards
Rajshree

TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any an

iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?

Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart.

Applied changes on interfaces not processed as updated on scheduler

Similar Messages

Maybe you are looking for