Applying group on interface 5.1.3

Hi
Just wondering why it's not possible to configure an apply-group directly on an interface in one row.
RP/0/RSP0/CPU0:9K(config)#interface bundle-ether 2000.3628 a
aaa address-family arp auto-ip-ring
RP/0/RSP0/CPU0:9K(config)#interface bundle-ether 2000.3628 ?
aaa AAA configuration
address-family AFI/SAFI configuration
arp Configure Address Resolution Protocol
auto-ip-ring Auto-IP-Ring interface configuration commands
Apply-group is missing here.....
I need to go to the interface level to be able to run apply-group
RP/0/RSP0/CPU0:9K(config)#interface bundle-ether 2000.3628
RP/0/RSP0/CPU0:9K(config-subif)#a
aaa address-family apply-group apply-group-append
apply-group-remove arp auto-ip-ring
RP/0/RSP0/CPU0:9K(config-subif)#a
RP/0/RSP0/CPU0:9K(config-subif)#?
aaa AAA configuration
address-family AFI/SAFI configuration
apply-group Apply configuration from a group
apply-group-append Append apply-group configuration from a group
apply-group-remove Remove a group from apply-group configuration
arp Configure Address Resolution Protocol
When looking at config in formal mode its seem like you should be able to configuring it in one row.
Is there a technical reason for this behavior or just a miss when writing the code?
/Peter

Peter,
That looks like a miss in the parser code for both int and sub-int, I'll open up a bug with that team to get it fixed.
Thanks,
Sam

Similar Messages

Servers take an endless time at applying group policy settings

We have some Windows 2008R2 RDS servers that have been given a syspreped image. After a few day in production, and several nightly reboots, the servers start to hang at applying group policy setting. I have created a gpsvc.log file. What can be wrong with
these servers?
When i reboot the server without network connection, the reboot time is fine. The user login still takes forever.
GPSVC(fc.4ec) 08:38:21:227 MachinePolicyCallback: Setting status UI to Beleid Group Policy Services toepassen...
GPSVC(fc.4ec) 08:38:21:227 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(fc.1a4) 08:38:21:227 Message Status = <Beleid Group Policy Services toepassen...>
GPSVC(fc.1a4) 08:38:21:227 Setting GPsession state = 1
GPSVC(fc.5b4) 08:38:21:820 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {827D319E-6EAC-11D2-A4EA-00C04F79F83A}, dwStatus = 0x0
GPSVC(fc.5b4) 08:38:21:867 GetWbemServices: CoCreateInstance succeeded
GPSVC(fc.4ec) 08:38:22:475 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {91FBB303-0CD5-4055-BF42-E512A681B325}, dwStatus = 0x0
GPSVC(fc.4ec) 08:38:22:491 GetWbemServices: CoCreateInstance succeeded
GPSVC(5dc.5e0) 08:38:24:285 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x2a0
GPSVC(5dc.5e0) 08:38:24:285 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.1b0) 08:38:24:285 Target = Machine
GPSVC(5dc.5e0) 08:38:24:285 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(5dc.5e0) 08:38:24:285 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(fc.1b0) 08:38:24:285 Target = Machine, ChangeNumber 0
GPSVC(5dc.5e0) 08:38:24:285 CGPNotify::RegisterForNotification: Entering with target S-1-5-18 and event 0x3d4
GPSVC(5dc.5e0) 08:38:24:285 Client_InitialRegisterForNotification: User = S-1-5-18, changenumber = 0
GPSVC(fc.1b0) 08:38:24:285 Target = S-1-5-18
GPSVC(fc.1b0) 08:38:24:285 Could not find user by sid, finding user by session id
GPSVC(fc.1b0) 08:38:24:285 Caller requesting for user notification/lock is from session 0
GPSVC(5dc.5e0) 08:38:24:285 Client_RegisterForNotification: User = S-1-5-18, changenumber = 0
GPSVC(5dc.5e0) 08:38:24:285 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(fc.1b0) 08:38:24:285 Could not find user by sid, finding user by session id
GPSVC(fc.1b0) 08:38:24:285 Caller requesting for user notification/lock is from session 0
GPSVC(62c.64c) 08:38:25:330 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x1d4
GPSVC(62c.64c) 08:38:25:330 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.1b0) 08:38:25:330 Target = Machine
GPSVC(62c.64c) 08:38:25:330 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(62c.64c) 08:38:25:330 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(298.2c0) 08:38:28:310 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xab0
GPSVC(298.2c0) 08:38:28:310 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.1b0) 08:38:28:310 Target = Machine
GPSVC(298.2c0) 08:38:28:310 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(298.2c0) 08:38:28:310 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(fc.1b0) 08:38:28:310 Target = Machine, ChangeNumber 0
GPSVC(fc.7c0) 08:38:39:401 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x93c
GPSVC(fc.7c0) 08:38:39:401 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.95c) 08:38:39:401 Target = Machine
GPSVC(fc.7c0) 08:38:39:401 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.7c0) 08:38:39:401 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(fc.95c) 08:38:39:401 Target = Machine, ChangeNumber 0
GPSVC(53c.580) 08:40:20:755 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x608
GPSVC(53c.580) 08:40:20:755 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.1c4) 08:40:20:755 Target = Machine
GPSVC(53c.580) 08:40:20:755 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(53c.580) 08:40:20:755 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(53c.580) 08:40:21:098 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x64c
GPSVC(53c.580) 08:40:21:098 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.1c4) 08:40:21:113 Target = Machine
GPSVC(53c.580) 08:40:21:113 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(53c.580) 08:40:21:113 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(53c.564) 08:40:21:238 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x67c
GPSVC(53c.564) 08:40:21:238 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.1c4) 08:40:21:238 Target = Machine
GPSVC(53c.564) 08:40:21:238 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(53c.564) 08:40:21:238 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(200.f6c) 08:41:11:501 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x350
GPSVC(200.f6c) 08:41:11:501 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.1c4) 08:41:11:501 Target = Machine
GPSVC(200.f6c) 08:41:11:501 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(200.f6c) 08:41:11:501 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(fc.1c4) 08:41:11:891 Target = Machine
GPSVC(fc.1c4) 08:41:11:891 Target = Machine, ChangeNumber 0
GPSVC(fc.7d0) 08:41:11:985 Target = Machine
GPSVC(fc.7d0) 08:41:11:985 Target = Machine, ChangeNumber 0
GPSVC(fc.7d0) 08:41:11:985 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(fc.7d0) 08:41:11:985 LockPolicySection called for user <Machine>
GPSVC(fc.7d0) 08:41:11:985 Async Lock called
GPSVC(fc.7d0) 08:41:11:985 Reader has to wait for lock. ReaderID : 1.
GPSVC(fc.7d0) 08:41:11:985 Registering wait for lock notification
GPSVC(fc.9d8) 08:41:13:015 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xcbc
GPSVC(fc.9d8) 08:41:13:015 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.7d0) 08:41:13:015 Target = Machine
GPSVC(fc.9d8) 08:41:13:015 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.9d8) 08:41:13:015 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(fc.9d8) 08:41:13:015 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd24
GPSVC(fc.9d8) 08:41:13:015 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.7d0) 08:41:13:015 Target = Machine
GPSVC(fc.9d8) 08:41:13:015 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.9d8) 08:41:13:015 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(200.1060) 08:43:10:223 CGPNotify::UnregisterNotification: Entering with event 0x350
GPSVC(200.1060) 08:43:10:223 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(200.1060) 08:43:10:223 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(200.1060) 08:43:10:223 Client_CompleteNotificationCall: failed with 0x71a
GPSVC(200.1060) 08:43:10:223 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(200.1060) 08:43:10:223 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(fc.1054) 08:43:16:252 Target = Machine
GPSVC(fc.1054) 08:43:16:252 Target = Machine, ChangeNumber 0
GPSVC(fc.1138) 08:43:24:188 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xeac
GPSVC(fc.1138) 08:43:24:188 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.7d0) 08:43:24:188 Target = Machine
GPSVC(fc.1138) 08:43:24:188 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(fc.1138) 08:43:24:188 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(fc.1054) 08:43:29:418 Target = Machine
GPSVC(fc.1054) 08:43:29:418 Target = Machine, ChangeNumber 0
GPSVC(fc.1054) 08:43:50:304 Target = Machine
GPSVC(fc.1054) 08:43:50:304 Target = Machine, ChangeNumber 0
GPSVC(fc.1374) 08:51:06:327 Found the Waiting Rpc Reader in the waiting list. Removing it...
GPSVC(fc.1374) 08:51:06:327 Lock timeout
Gert MCITP SA, EA & VA

Hi,
From the log you submit, I found the following error:
GPSVC(f0.13fc) 03:00:18:665 Client_CompleteNotificationCall: failed with 0x525
GPSVC(2f0.baf4) 03:00:18:665 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(518.e980) 03:00:18:665 Client_CompleteNotificationCall: failed with 0x6ba
GPSVC(f0.13fc) 03:00:18:665 CGPNotify::OnNotificationTriggered: Trying to recover from error 1722
GPSVC(518.e980) 03:00:18:665 CGPNotify::RegisterNotificationAsynchronously: Starting async registration
GPSVC(3b8.3e0) 03:04:19:034 Client_RegisterForNotification: CheckRegisterForNotification returned error 0x6d9
GPSVC(3b8.3e0) 03:04:19:034 CGPNotify::RegisterForNotification: Service not RUNNING. waiting
GPSVC(3b8.3e0) 03:04:19:034 CGPNotify::RegisterForNotification: Trying to recover from error 1753
GPSVC(3b8.3e0) 03:04:19:034 CGPNotify::RegisterNotificationAsynchronously: Starting async registration
GPSVC(100.4c8) 03:05:07:753 ProcessGPOs: OpenThreadToken failed with error 1008, assuming thread is not impersonating
GPSVC(100.13f4) 07:54:09:864 GetOldSidString: Failed to open profile profile guid key with error 2
GPSVC(658.2354) 09:52:41:726 Client_ProcessRefresh: ProcessRefresh returned error 0x5b4
GPSVC(658.2354) 09:52:41:726 GetGPOList: Client_ProcessRefresh failed with 0x5b4.
GPSVC(658.2354) 09:52:41:726 Exiting RefreshPolicyForPrincipal with status = 1460
GPSVC(100.1a7c) 10:48:26:711 CGPAdminEventInitFailure::Initialize(): FormatMessage failed to look up error code (0x4005) due to error 317. Can not log error description.
GPSVC(100.219c) 10:48:26:711 ProcessGPOList: Extension Internet Explorer Branding was not able to log data. Error = 0x80004005, dwRet = 1252,leaving the log dirty
GPSVC(100.19b4) 10:48:27:491 ProcessGPOList: Extension Internet Explorer Branding was not able to log data. Error = 0x80004005, dwRet = 1252,leaving the log dirty
1. Please try to renamed the files on the folder c:\windows\system32\GroupPolicy to .old and ran Gpupdate /force.
2. Please verify the DNS set correctly and DNS Client Service is enabled. Restart the DNS Client Service.
Hope this helps!
Best Regards
Elytis Cheng
TechNetSubscriber
Support
If
you are TechNetSubscription user
and have any feedback on our support quality, please send your feedback here.
Elytis Cheng
TechNet Community Support

Stuck at Applying Group Policy Printers Policy on Windows 2008 Servers

xp clients seem to be fine and map all printers at logon. The 2k8 servers all hang at logon for 30min or more at the Applying Group Policy Printers Policy. The print server is a DC in the same domain and it does not experience the issues at logon and gets to the desktop immediately.

a DHCP workstation
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
U:\>ipconfig /all
Windows IP Configuration
        Host Name . . . . . . . . . . . . : CP0030621
        Primary Dns Suffix . . . . . . . : us.tms.local
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : us.tms.local
                                            us.tms.local
                                            tms.local
Ethernet adapter Local Area Connection:
        Connection-specific DNS Suffix . : us.tms.local
        Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
        Physical Address. . . . . . . . . : 00-19-BB-5F-EE-75
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 10.1.10.165
        Subnet Mask . . . . . . . . . . . : 255.255.254.0
        Default Gateway . . . . . . . . . : 10.1.10.1
        DHCP Server . . . . . . . . . . . : 10.1.10.27
        DNS Servers . . . . . . . . . . . : 10.1.10.27
                                            10.1.10.28
        Lease Obtained. . . . . . . . . . : Monday, August 24, 2009 8:24:12 AM
        Lease Expires . . . . . . . . . . : Saturday, August 29, 2009 8:24:12 A
Ethernet adapter Bluetooth Network Connection:
        Media State . . . . . . . . . . . : Media disconnected
        Description . . . . . . . . . . . : Bluetooth Device (Personal Area Net
ork)
        Physical Address. . . . . . . . . : 00-0D-3A-A6-BA-28
win2k3 web server which logs in successfully
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
U:\>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : wlfdweb01
   Primary Dns Suffix . . . . . . . : us.tms.local
   Node Type . . . . . . . . . . . . : Unknown
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : us.tms.local
                                       tms.local
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : HP NC7782 Gigabit Server Adapter #2
   Physical Address. . . . . . . . . : 00-14-C2-C3-DA-3A
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 10.1.10.29
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   IP Address. . . . . . . . . . . . : 10.1.10.30
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.10.1
   DNS Servers . . . . . . . . . . . : 10.1.10.27
                                       10.1.10.28
Print Server that logs in fine (also a DC and DNS Server)
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
U:\>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : wlfddc02
   Primary Dns Suffix . . . . . . . : us.tms.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : us.tms.local
                                       tms.local
Ethernet adapter Local Area Connection 4:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit Server Ad
apter #2
   Physical Address. . . . . . . . . : 00-1C-C4-EF-B7-A4
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.1.10.28(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.10.1
   DNS Servers . . . . . . . . . . . : 10.1.10.28
                                       10.1.10.27
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 9:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{9FB5C233-FB93-471F-873E-6DFDFCFED
2AE}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
server that hangs at applying group policy printers (the other dc and dns server for the domain)
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
U:\>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : wlfddc01
   Primary Dns Suffix . . . . . . . : us.tms.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : us.tms.local
                                       tms.local
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 00-0F-1F-68-D6-42
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.1.10.27(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.10.1
   DNS Servers . . . . . . . . . . . : 127.0.0.1
                                       10.1.10.25
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 8:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{C0EEED04-498A-42FC-9C42-86A37BD4D
8D5}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

After applying Group By to an IR, no further formatting can be performed

I have an interactive report that shows multiple accounts across many dates. I would like to create a chart by date for the total of all accounts.
As soon as I apply the format of Group By, the format menu is no longer available so I can't chart it.
Is it possible to do this?

Timo,
I don't know, nor can I find the relevent bug in metalink. Can anyone at Oracle tell us?
In my opinion, the best solution would be to apply the row limit to the outer part of a group by (or chart) query. In can't imagine a use case where anyone would want to perform a group by on an (effectively random) subset of the available data.
The problem I have is that I have a couple of IR's on two very large tables (around 1M rows each). When the reports are showing each record, I'd like to apply the row limit (to say 10,000 rows are less), but when they are showing chart or group by results, I want to show this based off all the available data (although it would be ok / good to have the row limit applied outside the group by).
At the moment I'm looking for a workaround, the best I can see would be to put a rowlimit clause in the IR query and base that on a page item, then setting the page item based on the report display type (report / group by / chart). I'm not sure how to get a javascript to fire when the report is updated though.
James

Apply Group Policy to external clients

Is it possible to apply GPO's to clients on external networks such as their own personal networks. I'm looking at solutions such as authenticating them through a proxy on the perimeter network and are pushed to the Domain Controller to force these policies.
As it stands, the clients use a VPN client to gain access to the corporate network, and I know that group policy will use the Network Location Service to detect the Domain Controller, but the VPN connection is not mandatory and most be established by the client,
if this connection is not required for their job, the may never connect and not get updated GPO's.

Hi,
I agree with Joseph. Unlike many traditional VPN connections, which must be initiated and terminated by explicit user action, DirectAccess connections are designed to connect automatically as soon as the computer connects to the Internet.
Regarding DirectAcces, the following articles can be referred to for more information.
Using DirectAccess
http://technet.microsoft.com/en-in/windows/dn168168.aspx
Windows Server 2012 Direct Access – Part 1 What’s New
http://blogs.technet.com/b/meamcs/archive/2012/05/03/windows-server-2012-direct-access-part-1-what-s-new.aspx
In addition, for this question mainly focuses on network, in order to get more and better help, we can also ask for suggestions in the following forum.
Network Access Protection
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverNAP
Best regards,
Frank Shen

How to apply group settings of UDF and UserDefinedValues to all documents ?

I have made many User Defined Fields, category group settings of UDF, and User Defined Values (Formatted search) in a marketing document.
And I want to apply them to all of the marketing documents, that is Sales and Purchase documents,,, all the same.
Is there any way to achieve it?
Thanks in advance...

Thanks,,
This thread it not about setting for different users but for different type of documents.
And is there any way to configure the category settings of UDF for document types by SDK coding?
Edited by: Sung-Su Beck on Nov 29, 2011 7:27 AM

Auto reboot / Manual reboot : easy way to apply group policy for each group without multiple AD links? Help appreciated

Good morning,
I have two policies for WSUS, one that auto-reboots the client and one that allows for manual reboots. I'm sure this is very obvious, but i'm wanting to make sure I do this correctly.
What's the easiest way to apply the policy for manual/auto reboots without having to go through my entire active directory tree and link it to each OU containing mixed computers?
I hope this makes sense, but I know i can set security groups and then set it for the scope, but if I go that route is there a way to apply it to all Domain Computers, EXCEPT those who are a member of security group "MPS - WSUS Manual" for example?
Any input here is greatly appreciated
Thank you

If all the machines that you want to have the manual option are in a few select OUs then you could apply the auto reboot GPO to the root of the domain, and then link the manual GPO just to those GPOs containing the relevant machines. As explained here
http://technet.microsoft.com/en-gb/library/cc785665(v=ws.10).aspx a policy applied to an OU overrides a policy applied to the domain as a whole.
While I'm not sure, from your description I'm guessing that's the case, and they're actually mixed in throughout the domain? In which case, the other option might be to make use of group policies order or precedence. As described here
http://blogs.msdn.com/b/muaddib/archive/2012/08/22/determine-gpo-precedence-with-gpmc-gpresult.aspx you'll see that the order that the GPOs are listed makes a difference to the order that they are applied, and the last to be applied takes precedence over
those that come before. Therefore using that, if you applied the reboot policy to everyone, and then applied the manual one with a security filter so it only applied to your "MPS - WSUS Manual" group such that it had a higher precedence, all machines would
receive the first GPO, but those machines in that group would have that overridden by the second policy.

Applied changes on interfaces not processed as updated on scheduler

Dear Gurus,
Scenario
=====
Having problems in implementing a change in specific interface from a package.
How i do it:
1. Done specific changes to an interface from package A(version 001).
2. Test loading and verified loading successful on return rows.
3. Generate a new scenario for package A(version 002).
3. Hence, I have this package B that only perform scheduled loading tasks.
But when Package is executed overnite ( assuming interfaces had been updated, from the ETL diagram had applied changes of package A scenario version had been updated to the new version(002)
nothing actually perform on the interface changed. Checked on edited interfaces is changed as last saved.
Questions
======
-Would updating the agent schedule update the version changes to be executed as well? or
-Is there something else that had been missed by me as far as the 3 steps as mentioned above?
Help and pointers are deeply appreciated :)
Regards,
Terri

Dear Santos,
Sorry for the late reply..
Well let me roughly explain on my scenario in a clearer basis sorry.. :)
Current Implementation:
Package Transaction A & B and Package ETL
Package Transaction below are the functions:
-created several interfaces to perform Loading to sql db(no problems)
-Question arise ere.. say i have modified the interface in this package and applied changes.
Do i need to regenerate this package scenario?
Package ETL
-A Package created to synchronize scenario processes on a daily basis
-So in the diagram would have scenario from Scenario Transaction A connects to Scenario Transaction B where agent schedule
is applied on this Package ETL to process daily updates.
-Questions arises here again.. coz once done the changes on say Package Transaction A on interfaces assumingly done correct steps by applyin changes to interfaces. Do i need to regenerate a scenario for this Package ETL say pre change package ETL is version 001 n post change on specific interface; should i create a new scenario with version 002?
Other probs with ODI
-Regenerate Scenario crashes Dun know wut's wrong?
-Cant seem to remove previous Scenarios?
I know its preety much long winded.. but i'm such a novice in odi..
pointers and advises are truely appreciated :)
Regards,
Terri

Using WMI Filter to apply group policy to users on computers in a security group

Hello all,
I've got a bunch of computers that I want to apply some user side polices that affect all users that log on to these specific computers (they are used for exams).
Unfortunately it is company policy to have a flat OU structure and as such moving these computers into their own OU is out of the question. Which brings me to wanting to create a WMI filter to limit the policy to running on computers only within the security
group and then set the security filtering to "Authenticated Users". The policy will be linked to the all student computers OU where a few thousand machines sit, but will only apply to 20 or so machines (I know it's messy).
Anyway that brings me to my question, can someone point me in the right direction for how I would go about creating this WMI query?
Cheers

> I've got a bunch of computers that I want to apply some user side
> polices that affect all users that log on to these specific computers
> (they are used for exams).
That's what "Loopback" initially was designed for. Nowadays, we can use
some other tricks :)
http://evilgpo.blogspot.de/2012/02/loopback-demystified.html
http://blogs.technet.com/b/askds/archive/2013/02/08/circle-back-to-loopback.aspx
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

ACL applied to Vlan interfaces

I have been working with access lists for a while now and i think i have a good knowledge about them. But the thing i'm still confused with is when you apply ACL "in" and "out" to a SVI or lvna virtual interface.
It seems like in these type of interfaces the directions change completely compared to the normal interfaces (ethernet, serial... etc.) The logic is different and sometimes i find myself in problems when i have to do some troubleshooting in my work.
I've tryied to found some information or manuals on Cisco about this specific issue but unfortunely, i couldn't find anything clear.
Is there some method to quickly know when these ACL should be applied in one direction or another?
Thanks for your time.

It's no different on a SVI , "in" means coming in from the network (user ports) . "Out" means out towards the clients network.

How can I apply group policy but exception some users like administrator?

Hello all.
How can I set a group policy and apply it to users exception the administrator ?
Cheers.

Hello,
please see
http://www.grouppolicy.biz/2015/03/how-to-stop-local-administrators-from-bypassing-group-policy/if you talk about local administrator accounts. In shortyou CAN'T.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to apply group policies to have same settings as IE on Firefox

have enviornment for Windows7 and Vista with Firefox installed. Need to have similary GPO settings as IE on firefox.
Did downloaded the Adm files and pushed the gpos but nothing seems to work, please help ASAP,

hello sudiptgfirefox, normal firefox builds from mozilla aren't integrated to or compatible with group-policy at all. if you are using a third party tool/software to achieve that, you'll have to contact their support if things are not working as expected...

Rename group of interfaces with udev

Hello!
I was wandering how I could achieve the following with udev or with the help of some other tool:
* Match an interface (used for wan) and rename it to WAN (DONE)
* Match All the rest of the interfaces and rename them as LAN1, LAN2 ... LANn.
The thing is that I want to be able to add an Ethernet card in the future and not have to worry about it's name.
Thanks in advance

Download Renamer4Mac or BatchRename'em 1.1 from VersionTracker or MacUpdate.

Group by in Interface

Dear all,
how we can use group by in interface
thanks
Naseer

Hi Naseer,
How are you?
It doesn't require to specify GROUP BY in your interface, as ODI automatically applies GROUP BY for any SQL standard transformation. One thing you have to make it clear is that you have to run the column either in SOURCE or STAGING and your are not using any aggregate functions and you are not using any CASE/SYSDATE function in your mappings.
Thanks,
G

Group Policy Pref - Mapped Drives Not Applying to One User

Hi All,
I’m new to this list, so please excuse any etiquette slip ups. 
I have three users at a site. All their machines are running Windows XP Service Pack 3 and have client side extensions installed. I created a group policy to map their default drives using GP User Preferences.
Each of the drives is set to "update".
As an example of the policy created XML is as follows:
<Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="H:" status="H:"
image="2" changed="2009-11-25 05:13:58"
uid="{8A44D2F4-AAE5-4F43-AEEC-D36F08EA619C}" desc="Maps the users H drive to
ServerName\users$\%username%" bypassErrors="1"><Properties action="U"
thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
path="\\ServerName\users$\%username%" label="Home (ServerName)"
persistent="1" useLetter="1" letter="H"/></Drive>
and
<Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="J:" status="J:"
image="0" changed="2009-11-30 03:52:58"
uid="{535CD462-A45D-4363-ADA1-2316D5ECC703}" desc="Maps J drive for users to
\\ServerName\apps" bypassErrors="1"><Properties action="C"
thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
path="\\ServerName\Apps" label="Apps (ServerName)" persistent="1"
useLetter="1" letter="J"/></Drive>
The group policy is applied to an OU for that site.
All three users are in the same OU.
All three users are also in the same “xxsitecode Users” group.
2 of the users log into their pc and get the mapped drives with no issue, but one user doesn’t.
There are no other login scripts and the user has no manually mapped drives.
He does have a H drive mapped using the profile field in his AD object as a temp measure. But every 90 mins any other manually mapped drives are removed by the policy.
We don’t use roaming profiles
To trouble shoot I have tried
-    Reinstalling client side extensions
-    Re-joining the pc to the domain
-    Running gpupdate from the command prompt to see if any event logs are generated (none are)
-    Manually mapping the drives to make sure there is network access etc – I can manually map them/he can access them.
-    Creating the user a new account, when he logs in using that account he gets his mapped drives on all PC’s
-    Getting the user to log into a different pc, when he does this he doesn’t get his drives – so it’s not his machine or profile
-    Manually checking the security on the user object in AD against one of the users who gets their drives mapped
I'm sure the GP is fine because it works for two other users and the testing isolates his user account as the issue.
The Policy I’m having issues with is xxxx Mapped Drives/ Printers
I have posted this issue on the tech net GP discussion groups page, but haven’t had any replies.
Any suggestions would be appreciated.
Simone

What's interesting is that I applied a new GP to users - it has one policy setting and one preferences setting. He only gets the policy setting.. aka he gets the wallpaper but not the homepage.
Also, Jorke asked me to post the gpresult /z .
Microsoft (R) Windows (R) XP Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 10/02/2010 at 2:19:34 PM
RSOP results for DOMAIN\USER on MACHINENAME : Logging Mode
OS Type:                     Microsoft Windows XP Professional
OS Configuration:            Member Workstation
OS Version:                  5.1.2600
Domain Name:                 DOMAIN
Domain Type:                 Windows 2000
Site Name:                   SITECODE
Roaming Profile:
Local Profile:               C:\Documents and Settings\USER.DOMAIN
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=MACHINENAME,OU=Laptops,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
    Last time Group Policy was applied: 10/02/2010 at 1:06:38 PM
    Group Policy was applied from:      XXXXXADC.DOMAIN.com.au
    Group Policy slow link threshold:   500 kbps
    Applied Group Policy Objects
        Allow Remote Assistance
        au-mdwsus
        Default Domain Policy
        Legal Notice
        Proxy Settings
        Logon as service, operating system
        AU-WSUS
        Desktop Background & Home Page
        Reg Permissions for default desktop
        Local Admin & Local Power Users
    The following GPOs were not applied because they were filtered out
        SITECODE Mapped Drives/ Printers
            Filtering: Not Applied (Empty)
        Local Group Policy
            Filtering: Not Applied (Empty)
        AVD Rollout
            Filtering: Disabled (GPO)
    The computer is a part of the following security groups:
        BUILTIN\Administrators
        Everyone
        Debugger Users
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        MACHINENAME$
        Domain Computers
        CERTSVC_DCOM_ACCESS
    Resultant Set Of Policies for Computer:
        Software Installations
            N/A
        Startup Scripts
            GPO: Desktop Background & Home Page
                Name:         image.bat
                Parameters:
                LastExecuted: 7:55:34 PM
                Name:         swiftdesktop.vbs
                Parameters:
                LastExecuted: 7:55:35 PM
        Shutdown Scripts
            N/A
        Account Policies
        Audit Policy
        User Rights
        Security Options
        Event Log Settings
        Restricted Groups
        System Services
        Registry Settings
        File System Settings
        Public Key Policies
            N/A
        Administrative Templates
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts\List
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\CurrentVersion\Winlogon
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: Desktop Background & Home Page
                Setting: Software\Policies\Microsoft\Internet Explorer\Security
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: AU-WSUS
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                State:   Enabled
            GPO: au-mdwsus
                Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                State:   Enabled
            GPO: Allow Remote Assistance
                Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                State:   Enabled
USER SETTINGS
    CN=Matthew Luhrs,OU=Users,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
    Last time Group Policy was applied: 10/02/2010 at 1:54:53 PM
    Group Policy was applied from:      XXXXXADC.DOMAIN.com.au
    Group Policy slow link threshold:   500 kbps
    Applied Group Policy Objects
        Allow Remote Assistance
       **** SITECODE Mapped Drives/ Printers - has Gp Pref's that should apply
        Default Domain Policy
        Proxy Settings
        **** Desktop Background & Home Page - has Gp Pref's that should apply
        Local Admin & Local Power Users
    The following GPOs were not applied because they were filtered out
        AU-WSUS
            Filtering: Not Applied (Empty)
        Legal Notice
            Filtering: Disabled (GPO)
        Reg Permissions for default desktop
            Filtering: Not Applied (Empty)
        Logon as service, operating system
            Filtering: Not Applied (Empty)
        Local Group Policy
            Filtering: Not Applied (Empty)
        au-mdwsus
            Filtering: Not Applied (Empty)
        AVD Rollout
            Filtering: Disabled (GPO)
    The user is a part of the following security groups:
        Domain Users
        Everyone
        Offer Remote Assistance Helpers
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        NT AUTHORITY\Authenticated Users
        LOCAL
        Computer Account Operators
        Internet Users
        SITECODE Users
        DOMAIN-Public Folders Administrators
        All Email Users
        DOMAINSWIFTEMAIL
        Domain Admins
        Offer Remote Assistance Helpers
        WSUS Administrators
        DHCP Administrators
        CERTSVC_DCOM_ACCESS
    Resultant Set Of Policies for User:
        Software Installations
            N/A
        Public Key Policies
            N/A
        Administrative Templates
            N/A
        Folder Redirection
            N/A
        Internet Explorer Browser User Interface
            GPO: Proxy Settings
                Large Animated Bitmap Name:      N/A
                Large Custom Logo Bitmap Name:   N/A
                Title BarText:                   N/A
                UserAgent Text:                  N/A
                Delete existing toolbar buttons: No
        Internet Explorer Connection
            HTTP Proxy Server:   Proxy:port
            Secure Proxy Server: Proxy:port
            FTP Proxy Server:    Proxy:port
            Gopher Proxy Server: Proxy:port
            Socks Proxy Server: Proxy:port
            Auto Config Enable: Yes
            Enable Proxy:        Yes
            Use same Proxy:      Yes
        Internet Explorer URLs
            GPO: Proxy Settings
                Home page URL:           N/A
                Search page URL:         N/A
                Online support page URL: N/A
        Internet Explorer Security
            Always Viewable Sites:     N/A
            Password Override Enabled: False
            GPO: Proxy Settings
                Import the current Content Ratings Settings:      No
                Import the current Security Zones Settings:       No
                Import current Authenticode Security Information: No
                Enable trusted publisher lockdown:                No
        Internet Explorer Programs
            GPO: Proxy Settings
                Import the current Program Settings: No

Applying group on interface 5.1.3

Similar Messages

Maybe you are looking for