Apporval Overview displays incorrect status on item level after ordering

Hi all,
I am on SRM 7.0 and using the process-controlled workflow.
I am on SP2.
I set up a schema which has 1 approval step for SC > $10.000. The decision set is for the entire document.
When I am creating the SC, BEFORE I hit order, I click on the item number of eg. my first item, so the 'Details for item 1' screen appears.
Then I choose the 'Approval Process Overview' tab, and the approval overview displays correctly. The status of the one approver step is 'Open (No Decision Made)', under both header and item tab.
When I display the same SC trough 'advanced search' immediatley AFTER ordered it and no approver has touched the SC yet,
the overview the item displays the correct status 'awaiting approval'.
But when i go to the item details, approval process overview tab (as described above) the status displays 'User Decision: Approved'
There is no time entered for 'processed on'. The approver does have the workitem in the powl list and swi6 shows correlty that the workitem is in the approver inbox. So the approval workflow is working correctly, and it is just a display issue.
It looks like it is just a bug, but I couldn't find any notes on it.
Can anybody help me to correct this?
Cheers
Ulrike

Hi Ulrike,
I replicated exactly the steps your described but do not see the same system behaviour. On my system, just after creating the cart, in the section 'Approval status details for selected item', the status is 'No user decision'.
I searched notes and messages and found nothing related to this issue.
Can you send me screenshots showing exactly the steps you followed just to make sure I am following same steps in the replication.
Cheers,
Siobhan

Similar Messages

Approval status at item level

Hi,
I need to know whether the shopping cart item is rejected or not.(need to know the approval status at item level) and then make the rejection reason as mandatory.
I tried to get the value of the flag DEDUCT_IND from each item,but it is never set to 'X' eventhough I reject an item.could anybody please tell me when this flag will be changed or is there any other way to find the approval status at item level.
Regards,
Rohini

What is your SRM Version ?
If you have implemented process control workflow for Item level approval, then.
Once the approver rejects and item, the workflow sends the workitem back to the requester to make changes are accept the rejection. If the requester accepts the rejection then the workflow continues. If the workflow does not have any more approver then the shopping cart is approved and the line item which is rejected by approver is set to DELETE. i.e. BBP_PDIGP-DEL_IND is set to 'X'.

Oppurtunity status at item level

Hi Experts,
Could you please help know the oppurtunity status at item level (Distribution Status and Overall Status).
When checked, it is referring to data element CRMT_DISTRIBUTED and CRMT_OVERALL_STATUS.
Both have fixed values at domain level.
Could you please help me finding, in which table this data is stored at item level.
Regards,
Santosh

Hello Santosh,
For system status, CRM_JEST-STAT = I****, you can find the the defination with t-cd BS23.
For user status, CRM_JEST-STAT = E****, please check table TJ30.
Best regards,
Maggie

User status in item level in Interaction center

I confirgue the sales function in Interaction center. I want to set user status in Item level. But I don't find the user status field in item level in UI. Could you tell me how find user status field?

Hi Prem:
Yes, I have already confirgued status management and assigned to item category. I can see the status appear in back office UI but not in Interaction center. So it is strange.

Substitution and activated the same at the line item level in order to subs

I have created a substitution and activated the same at the line item level in order to substitute the ZRSPL (Payment Block) field by a constant value and a vendor invoice is posted using Transaction FB60. But the same is not working. When I post a vendor invoice using FB60, Payment Block field is being shown as blank instead of the constant value which I want to substitute.
>
> My prerequsite is mentioned below :
> BKPF-TCODE = 'FB60' AND BKPF-BUKRS = 'ABC' AND ( BKPF-BLART = 'KR' OR
> BKPF-BLART = 'KY' ) AND BSEG-DMBTR > '10000'

Hi,
I am not understanding the logic behind the prerequisites mentioned in your query.
Payment block field exists only for vendor related line item. However, you have not mentioned vendor reconciliation account in the prerequisites. It means, this substitution will trigger for all the line items which is wrong.
Or try following options.....
1) Substitution->Simulation
2) Extras->Expert Trace
Best Regards,
Madhu

Sales Order: confirmation status at item level

Hi,
I am trying to locate a status field in sales order tables which truly reflects the item level quantity confirmation. I have checked table VBUP. In some cases field BESTA, COSTA shows the status correctly. But I am not able to find a table which is true in all cases. I can do it by checking confirmed quantity at schedule line level, but trying to avoid that since it involves addition of schedule line confirmed quantities etc.
Any ideas?
Thanks
Anil

Hi ,
Check VBUK-GBSTK , and also VBFA for individual status check for sales , delivery and pick up...
Regards,
Vind.

Confirm Goods / Service display delivery date on item level

Hello all,
in transaction Confirm Goods / Service user can see creation date of the purchase order. Is it possible to somehow display required delivery date on item level. Field "Required on" which is visible in Basic data of the item.
Would like to have as minimum modification as possible, maybe through customizing (of course if possible) :o))
TIA
Gordan

Hello all,
in transaction Confirm Goods / Service user can see creation date of the purchase order. Is it possible to somehow display required delivery date on item level. Field "Required on" which is visible in Basic data of the item.
Would like to have as minimum modification as possible, maybe through customizing (of course if possible) :o))
TIA
Gordan

Status Profile @ Item Level

Hi ALL,
This is regarding Status profile. I have maitained status profie in Quotation item level.
Quotation has to approve by diff depts i.e. MM/PP sequentially.
so i have maintained- as
status no./ status/ initial status/ Lowest/Heighest/Position/Priority
1 / APRD / Approval req'd by MM / 1 / 2 / 1 / 1
2 / OKMM / OK by MM / 2 / 4 / 1 / 1
3 / NOKM / Not Ok by MM / 2 / 4 / 1 / 1
4 / OKPP / Ok by PP / 4 / 6 / 1 / 1
5 / NOKP / Not ok by PP / 4 / 6 / 1 / 1
6 / DONE / Finally approved / 6 / 6 / 1 / 1
when MM dept, trying to choose "NOKM- Not OK by MM" system is not allowing.
as per system settings, I should check status-2, before proceeding to status-3,
where as I want in such a way, either I can choose status 2 or 3.
Let me know, if anyone done this status profiles??

Thanks for your interest.
I have done the rel changes as suggested , system is still giving error.
as per my observation system is not checking at lowest/Heighest levels.
it is checking as per assigned "Status no" such no.1 , 2 & 3 so on.
( Lowest colums i have maintained "2" in step 2 & 3 which allowing me to move from 2 - 3 & 3 - 2, which is fine)
similarly system should allow me choosing from step-1 to step- 3 direclty,
ANYMORE IDeas

Display Header data to item level in me21n

Dear Friends ,
I have the requirement that Incoterm field in me21n at header level while creating purchase order needs to get reflected at item level too. Currently it is blank (at item level).
Is it the development or Customisation?
Can anybody please explain me how to go abt it?

If you enter an Incoterm on header level, this is valid for all items that do not explicitly have an Incoterm.
If you then enter an Incoterm on item level, this overwrites the Incoterm entered on header level.
So it's not clear why this requirement has come up.
http://help.sap.com/saphelp_srm50/helpdata/en/0c/b91b3f7f9e3642e10000000a114084/content.htm

ME51n additional tab in item level after customer tab

hi all,
I have already added Customer data tab in me51n item level, using screen exit SAPLMEGUI in enhancement MEREQ001. Can i add one more tab after customer data .
Regards
Nitin

Hi Nitin,
You can implement BADI ME_PROCESS_REQ_CUST to add additional tab. Read example implementation by going into menue Goto>Sample Code>Display .
Thanks & Regards,
Faheem.

Get Classification status of item in Sales Order for variant configuration

Hi Experts,
I want to get the classification status against the variant configuration of item in sales order.
When i enter the sales order in VA03 , at the item level, I select the item and click on item configuration icon below.
Here I can see the variant configuration. Now if I do not maintain the configuraiton correctly, then the classification status shows either locked or incomplete. When it is properly maintained it shows released. ( When it is locked, the classificaiotn status shows a red signal at the left bottom corner).
My requirement is to capture this classification status at the item level of each Sales Order.
How can I get this.

Hi!
try this code:
* Initialization
CALL FUNCTION 'CUDB_INIT'.
CALL FUNCTION 'CE_C_INIT'.
* read configuration from database
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
       EXPORTING
            instance                     = vbap-cuobj
       IMPORTING
            configuration                = gt_configuration
       EXCEPTIONS
            invalid_instance             = 1
            instance_is_a_classification = 2
            OTHERS                       = 3.
IF sy-subrc <> 0.
    WRITE: /'   No configuration data found!'.
    EXIT.
ENDIF.
* only sinlgle-level configuration possible
READ TABLE gt_configuration ASSIGNING <gs_instance> INDEX 1.
* get and show status
SELECT SINGLE * FROM tclc WHERE
       klart EQ <gs_instance>-conf-klart
       AND statu EQ <gs_instance>-conf-cstatus.
FORMAT COLOR COL_NORMAL.
IF tclc-frei = 'X'.
    WRITE: /'Status:', icon_green_light AS ICON.
ENDIF.
IF tclc-gesperrt = 'X'.
    WRITE: /'Status:', icon_red_light AS ICON.
ENDIF.
IF tclc-unvollstm = 'X' OR tclc-unvollsts = 'X'.
    WRITE: /'Status:', icon_yellow_light AS ICON.
ENDIF.
FORMAT COLOR OFF.

Custom filed at line item level in order.jsp

Hi,
I want to add a custom material number field at the line item level that will search for the item related to the customer material number and populate the order.jsp.
similar to the below mentioned Standard functionality:-
In order.jsp when we enter a valid item no in the item text box
and press enter then the related data of the item is populated in order.jsp.
Is this possible ??
If yes please let me know how can we achiese this.

Satish,
the problem with product search is that ....
custommaterial number will be mapped with the item number for different customers in a separate table. so if i place the searc in proucts search tab it will fetch form product master.
so I was think of extending the process flow and from jsp capture the value entered and trigger action from there make a item search following the standard process.
but my problem is that I am not able to capture the value entered in the custom field when refresh is clicked?
can you tell me how is the item search done when we enter the item number and press enter?
please suggest

Different division at header and item level in Order

Hi Gurus,
i am facing this issue where while creating quotation in CRM i entered sold to party, selected the org data ( OA/DI/OP ). i entered the product with quantity. now at item level in Organization tab my sales area is showing as ( OA/DI/01). system is picking the division maintained for product which is 01) so division is different at header and item level. i need the header division to be used at item level as well.
how can i achieve this?
Thanks and Regards
Sudhir Grover

Hi Sudhir,
Make sure the settings in the SPRO>CRM>Master Data>Products>Special Settings for Sales Operations--> Define Division settings is activated with Header Div. Act.
Also check the details in the IMG activity documentation for define division settings.
Hope this helps.
Regards,
Chandrakant

W8-Display too bright on lowest level after upgrade to windows 8 (64bit)

Display is too bright on lowest level after upgrade to windows 8 (64bit)
Hello,
does anyone know how to get the old drivers for w7 to work?
or is there another solution?
My installed driver:
Mobile Intel series 4 express chipset family MS corp. -WDDM 1.1
8.15.10.2702
even on cloudy day it hurts my eyes... (my temp solution is dimScreen app- black filter on top of all windows)
Fn+Home/End
funny thing is that the scale which shows on top left corner has like 11 steps but only top 8 works
also the old bottom page brightness scale (15 steps) disappeared.
background info:
X301-2776 so IMO it is GM45
i had w7pro i i have over installed it with w8pro both 64
thanks ahead for any ideas

success
this makes the trick - old drivers for win vista 64bit
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7xd649ww.exe
and for 32-bit
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7xd549ww.exe

Display report : plan line items for internal orders

When running the report with KOBP tcode, although i have some plan cost line items in the order, i have the message :
No plan line items were selected
Message no. KB421
Could anyone advise?
However, the report with KOB1 tcode works well and i have the results as expected for actual line items.

this is may be config issue.
can you explain with accounting entries for said line items and offsetting GL for each line?
regards.
ashok

Apporval Overview displays incorrect status on item level after ordering

Similar Messages

Maybe you are looking for