Display report : plan line items for internal orders

When running the report with KOBP tcode, although i have some plan cost line items in the order, i have the message :
No plan line items were selected
Message no. KB421
Could anyone advise?
However, the report with KOB1 tcode works well and i have the results as expected for actual line items.

this is may be config issue.
can you explain with accounting entries for said line items and offsetting GL for each line?
regards.
ashok

Similar Messages

  • Budget Line Item for Internal Order was disappeared

    Dear GURU,
    I have the problem when posting budget via Tcode KO22 KO24 and KO26.
    When posting budget in the first time, the system was not generate budget document.
    But it was created when I post budget again in the second time.
    Please tell me what happen for this situation, I am not sure there is SAP note for support this error or not?
    Thanks in advance.
    Regards,
    Nattakarn A.

    Hi Eli,
    Thanks for your response.
    This situation was only occurred in the first time of budget entering for each internal order.
    Please kindly to help me to solve this problem.
    Thanks in advance.
    Regards,
    Nattakarn A.

  • Issue with report (S_ALR_87013611) that is actual/plan line items for Cost

    Hi Gurus,
    I am having issue with the report (S_ALR_87013611) that is actual/plan line items for Cost Center.
    When i execute the report for a cost element  510200 the amount is 23,380.13, but when i drill down on it by double click on that amount the value in obj curr is 15468.91. Hence there is the differnce. When i futher drill down by double click on the amont of 15468.91 and i go to display group currency and take the total it is 23380.13 and display in local / doc currency the amount is 15468.91. I guess due to this there is difference. The cost center & the cost elements are the same i have checket it.
    My concerns is that the group curr is USD and obj curr / local curr is USD. So is group curr and doc curr is USD then when i click on dislay curr and select group curr why the amounts are changing.
    Kindly adivce

    Try to look if there is any filtering criteria applied in the report to which you drill-down.
    The difference can be also caused by the "value type" - some reports show actual and statistical costs together in one column while the others strictly show (are defined to show) only e.g. actual costs (type 04) and not the statistical costs (type 11)

  • Not displaying Actual cost Line Items for Order

    Hi Gurus,
    Recently we did patching from SPC6 to SPC8. After patching we noticed that could not able to see displaying Actual cost Line Items for Order from work order.
    System is not throughing error message when I double cline on line item at Plan/Actual Comparison screen in work order cost tab.
    We can able to see the same from KB01 with out any problem. I have attached the details.
    Could any one suggest me please. Appreciate your thoughts
    Regards,
    Srini

    Hi Paul,
    I have implemented this note and get it sorted out.
    Thank you for support.
    Regards,
    Srini

  • How to check plan line items for plan cost at network activity level?

    Dear all,
    How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
    I am not able to check using CJI4 or CJI9 report.
    Kindly advise.
    Thanks and regards,
    Jessie

    Hi Jess,
    Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
    In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
    But I am not sure if suits your requirements. Wait for other experts to comment on this.
    Regards,
    Amit

  • Display projet planned line items CJI4

    i have done planning on wbs *** cost element level in CJR2 along with quantity
    im trying to run report CJI4 but no line item selected.
    No line items were selected
    Message no. KB422
    Diagnosis
    No line items were found.
    Possible explanations:
    You have no authorization for these line items
    You have activated criteria that exceed the initial screen (by means of the 'Further selection criteria' function).
    Procedure
    1. In your user master, check which authorizations you have for reporting
    2. or change the selection criteria.
    how can i resolve it

    This is an extract from help.sap.com:
    In project cost planning, line items are only created if the project or WBS element has a user status to which the business transaction "Plan line items" is assigned. This being the case, plan line items only document the changes made from the time when planning documents are written for a project or WBS element.
    In planning, you can define whether line items should be written in a plan version for cost and revenue planning activities.
    If planning integration is active in the fiscal-year-dependent parameters of the relevant planning versions, the system writes cost element planning line items for plan-integrated WBS elements, regardless of user status.

  • How can I add a new line item for production order?

    HI all,
    How can I add a new line item for production order through BAPI/FM? Thanks in advance.

    Hi Mil,
      Unfortunetly SAP is not in front of me.
    But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
    Reward if useful!

  • Transaction KSB1 - Display Actual Cost Line Items for Cost Centers

    Hi,
    When I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my offsetting accounts (accumulated depreciation accounts) are shown except for the ones for asset classes:
    - Buildings
    - PC & Small Applications
    On the FI side, I can see transactions being posted to their relative accumulated depreciation accounts but I do not see this on the CO side when transaction KSB1 is executed. I have checked the config and the account assignments look correct. Also, the assets created have cost centers assigned to them.
    Could you please help!
    Thanks,
    - Deki

    Hi Murali,
    I have one depreciation expense account (P/L Account) which is also a cost element.
    During depreciation run, the different asset classes are supposed to hit the depreciation account above and their corresponding accumulated depreciation accounts (These are Balance Sheet Accounts and I have separate accounts for each asset class .. ie: Accumulated Depreciation for Furniture and Fixture for asset class Furniture and Fixture).
    Now when I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my accumulated depreciation accounts are shown except for the ones for these asset classes:
    - Buildings
    - PC & Small Applications
    Any thoughts on why the above aren't showing?
    Thanks!  I really appreciate your help!
    - Deki

  • KOB1 - Display Actual cost line items for Orders

    Hi All
    A production order has been settled. When the actual cost line items are displayed for the said production order in KOB1, there are multiple line items related to the production order that gets displayed.
    The issue we are facing is, in one of the line item, the accounting document has one credit (Consumption a/c) and two debits (one debit is to inventory a/c and another debit is to price difference a/c). However in the report, in the offsetting GL column only one GL code (price difference gl account a/c) but appears with the entire amount.
    Ideally two separate line items needs to be displayed with respective line items. Is this a flaw in SAP.
    Can anybody throw some light on this and help me.
    Regards
    Prasanna

    this is may be config issue.
    can you explain with accounting entries for said line items and offsetting GL for each line?
    regards.
    ashok

  • Creation of suspension line items for Subscription orders

    hi ,
           I am currently working on IS-Media project.
    I have a requirement that I need to create a suspension for all the line items available for the subscription orders.
    I mean I have to create a new line item for all the active line items of a subscription order.
    I have seen the FM : ISM_SALES_ORDER_CHANGE.
    it is working for only single active line item.
    Could you please suggest any of the Function moulesavailable in the SAP : IS-Media?
    Thanks in advance.
    Vijay.

    Vijay,
    The best FMs that would meet your needs are below. They are listed in the order that will best address what you are trying to accomplish. They are ISM_SALES_ITEM_UNLIMIT_CHANGE, ISM_SALES_ITEM_SUSPEND and ISM_SALES_SCHEDULE_CHANGE.
    I hope this helps.
    Sibu

  • How to get the texts for each line item for Sales order in a smartform

    I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
    I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....

    Hi There,
    But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
    Like for ex:
    PO No.  Material Code        Line Item        Basic        Excise       Tax       Inv Value
    0000001 5000251                010               100           16         4.64      120.64
    0000001 5000252                020               200           32         9.28      241.28
    Can u help me on this?
    Regards,
    Jitesh

  • Assign plan/budget profile for internal order

    i just tried to use T-code KO22 to do change budget for an order, but error msg show 'Assign a plan or Budget profile to the object'.so i wonder how to create the plan or Budget profile and assigned it?  waiting for your answer....

    Hi,
    maintenance for budgeting profiles: T-code OKOB
    assignment to internal order types: T-code KOAB.
    Best regards, Christian

  • Sales order: Two schedule line items for single order item

    Hi,
    I have an issue with the schedule lines in the sales order. When we create a sales order  with today as the delivery date, it creates two schedule lines for the single order item. But if we give future date as the delivery date, then it creates one schedule line only. The confirmed quantity for the first line item (with today we the delivery date) is zero and second line item confirmed quantity (with delivery date as tomorrow) is actual order quantity. So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do we have stock.
    We donu2019t have availability check on and we use custom line item and schedule line categories.
    Please give some hints on what might be the issue.
    There was on post with this kind of issue, but it was closed without answer.
    Thanks,
    Srini

    Hi Srinivas,
    So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do have stock.
    As per my understanding although you have sufficient stock for the material system may be confirming the quantity in future date because of the forward scheduling. As you know system adds different times while evaluating the  confirmed delivery date. Check the route which system is using.

  • Plan settlement rules for internal orders

    Hi all,
            I am having a problem in setting up plan settlement rules for the internal orders. I have created a order and tried to set up a plan settlement rule. I am trying to settle the order to a Profitability segment PSG category. Everything is fine until here. Then when I am trying to change the profit center in the Profitability segment it is greyed out. I am unable to change it. This is not the case with actual settlement. In actual settlement you can change the profit center in the settlement rule but not in case of plan settlement. Can someone please help me in this. I need to change the profit center in the plan settlement rule. This is very urgent.
    Many thanks,
    Sarada

    Hi,
    Please check if it has any planned values already posted on this order already.  In this case, unless these values are settled it will not allow you to change the profit center.
    Also, the reason for the allowing a change of profit center in actual settlement rule might be that there are no actual values posted in the order.
    Good luck!!!
    Thanks and Regards,
    Bhuvaneswari.S

  • Maximum no of Line items for sales order,delivery document and billing docu

    Dear friends,
    How many line items we can enter for the following,
    1) a Sales order
    2) a Delivery document
    3) a Billing Document
    Thanks in advance.
    Regards,
    Shrikant

    Hello,
    the maximum limit of line items are as follows
    order-9999
    for delivery and invocie , it is restricted to 999 accouitng line items. since the tranfer to accounting can handle only 999 items , the restriction on delivery and invocie
    ex if there are excise postings, for a single line , there might be 5/6 lines genetrated for each line in invocie , therfore as per this the line in invocie get restricted
    you have a sap note , which offers suggestions to partially over come this
    hope this helps
    Thanks
    akasha

Maybe you are looking for

  • Change item value when a specific item has changed... how can i do that?

    Hi guys, i need to ask something... Is it possible to have a process or a computation, that gives value to an item, only when one specific item has changed. I have other items on my page too, but this two are related, and i need to give a specific va

  • User Department Codes

    Problem: Adobe 9 will not detect the user's default department code settings which in turn causes the print job to show up as "Invalid" at the printer requiring manual release. Detailed Description: * School environment teacher/students. * Toshiba co

  • Printing error with odd/even pages

    Apologies if this is the wrong group, I looked for a more appropriate one but there doesn't seem to be one on this server. If there's a better place to ask this question, please let me know. Anyhow, I'm using Acrobat Reader, latest version (I updated

  • Acrobat X Form Filler

    In using form filler is there a way I can make a universal change to the font and have all fonts at Times Roman 11 pt? Can I use a carriage return to widen the box?  Is form filler available on Acrobat 9? 

  • Can a processor get the resource (jar) an element was loaded from?

    I'm writing an Annotation Processor (JSR 269). Once process the annotations in the Compilation Unit, I need to look for resources in some of the classes referenced in the Compilation Unit. After I do that I need to look in the jar that encloses the r