Appraisal task not displayed in inbox of portal

Hi,
I have checked that PDD forms have been prepared using phap_admin_pa and they have. I know of no reason why the two tasks are not showing in the Inbox -or- the four forms are not in the status overview in My Appraisal.
above comment is from user, he checked in portal inbox with his ligin, please help y he facing this problem, am new to this area of work, are there any authorization problem to him..
Please advise me, I dont have portal login here, I can check in R/3 end only... Thanks in advance to HR gurus.
Sadana.

Hi there,
It may happen that your task has been reserved for someone else (like and administrator or maybe an error during workitem assignment). Check table SWWORGTASK to verify that at least one of the agents has the NO_SEL field blank. Otherwise no one will see the task on his inbox.
If that is the case, you can forward the task to someone else (assuming you have workflow administrator rights) through SWIA
Good luck,
Miguel

Similar Messages

Task not displayed in Inbox

Hi Experts,
In my sap inbox I am not getting one user decision task.
I am using a workflow which has 3 approval levels(user decisions).I am getting 2 tasks under workflow----grouped according to task,but 3rd one is missing.Can anyone please tell me what could be the problem and its solution.
thanks
Edited by: Raju Nair on Apr 29, 2008 6:11 PM

Hi there,
It may happen that your task has been reserved for someone else (like and administrator or maybe an error during workitem assignment). Check table SWWORGTASK to verify that at least one of the agents has the NO_SEL field blank. Otherwise no one will see the task on his inbox.
If that is the case, you can forward the task to someone else (assuming you have workflow administrator rights) through SWIA
Good luck,
Miguel

Hierarchy variable inpu help not displayed correctly in the portal

Hi ,
I have a problem when trying to select Hierarchy in the variable selection screen hierarchy is not being displayed
correctly in the portal/browser . When running the same report in BEX Analyser and in RSRT with HTML option the
hierarchy displays correctly in the variable selection screen .
In Portal Var selection screen Hierarchy is displayed side by side ie horizontally not level by level.
Please help.

Thanks Venkat, Problem is solved with the note u mentined

Tasks not displaying in Mail tab

Have recently started using Thunderbird (been using Outlook 2003) and have installed Lightening add on. I have created a number of tasks (mainly recurring) but they are not displaying in 'Tasks' pane on Thunderbird's main 'email' tab - they all have both Start and Due dates. The Task 'date' is highlighted in the mini-month display but the Task is not listed below in the Tasks pane. If I open the Calendar tab then tasks are displayed under their various dates. On one occasion the Tasks did list on the Tasks pane of Thunderbird's main mail tab(page) but next time I 'opened' Thunderbird they had disappeared!

I have no answer for you, but you might post on this thread. Perhaps the two affected might get some value out of talking.https://support.mozilla.org/en-US/questions/1017718
Some commonality of software or even the use of the two factor authentication on Google.

N97: Tasks not displayed

I'm using a MfE account on my N97. When synchronizing all items are well received and send so to see. However the task items (which are indeed synchronized) cannot be not displayed in my calendar application. Does anyone recognizes this problem and/or knows how to tackle this?

Hi. Thought I would advise that I downloaded the file from Nokia and tried to install it. It appears as though it is going to install, then get message 'Certificate error. Contact supplier'. I note from the blurb on the file site that it supports the N95 but no mention of N97. Can you advise how to email a question direct to Nokia Tech Staff? I can find no link on the Nokia Support pages. Thanks.

Notes displaying in Inbox

Since upgrading to Snow my Notes are showing in my Mail Inbox which they did not do under Leopard. Deleting them from my inbox also deletes them from the Notes folder. I can't seem to find anything in Mail Preferences to fix this. Any ideas?

For each mail account, you can choose to display notes in the Inbox, or in the Reminders folder. To set this, go to Preferences - Accounts - choose your account, click Mailbox Behaviours, then (in your case) untick "Show Notes in Inbox". They will then be shown in your Reminders folder (which you can move to any location you like in the left-hand panel).
Matt

Available tasks not displaying under Manage Tab in Portal.

Hi,
I have configured the custom web enabled tasks for creating business role and changing the user data.
When I log into portal and select the person from manage tab, and try to choose the task, I am not able to view the tasks created under custom web enabled tasks folder.
Could you please help me.
Regards,
Giridhar

>
Chennai SAP HELPDESK wrote:
> On-behalf of=user, Value=All Users(self service).
I think there is your problem: If you set on behalf of "self service" the task will show under the Self-Service tab. Try something like on behalf of "everybody" or some kind of filter etc.
Regards

BPM task not coming in inbox

Dear Experts,
This regarding the UWL issue which we are facing in our landscape.
We have an EP 7.01 SP11 system by which users access the BPM task and CE 7.2 SP06 system
Where the BPM workflow is created.
SSO is configured properly between these two systems where both systems UME is pointing
to the same LDAP. System configurations and UWL configurations are done properly ,in fact the
tasks where coming properly in the inbox before.
But all of sudden without any changes its not working now . we are not able to find the root cause
of it.
Kindly help us to resolve this issue and let us know if you need more inputs.
Many thanks in advance.
Regards,
Parthibaraja

Dear Parthibaraja
I hope you are well and many thanks for using the SAP Discussion Forums .
In relation to the issue you described you mentioned:
We have an EP 7.01 SP11 system by which users access the BPM task and CE 7.2 SP06 system Where the BPM workflow is created.
SSO is configured properly between these two systems where both systems UME is pointing to the same LDAP. System configurations and UWL configurations are done properly ,in fact the tasks where coming properly in the inbox before.
Now although you mentioned the configurations are setup accordingly. I would like you to kindly review the UWL Destination Service Configuration as the smallest discrepancy maintained can cause unpredictable and unexpected behaviour.
SAP Note: Note 1133821 - UWL Destination Service configuration
When you followed and implemented SAP Note 1133821 - UWL Destination Service Configuration we need to make sure that connector names and also destination names match exactly (Case Sensitive).
Example: I mean if your portal system alias (=UWL connector name) is for example XYZCLNT100, then the rfc destination name should be exactly XYZCLNT100$WebFlowConnector.
After checking this and if you make any configuration changes
Clear the UWL Cache
Restart the UWL Service (during a period of downtime/low usage levels)
Now in terms of the UWL and BPM tasks there are some important points to highlight which are covered in the following documentation link:
http://help.sap.com/saphelp_nw73/helpdata/de/4a/ee9c7488946d62e10000000a
42189c/frameset.htm
I have come across similar scenarios in the past which have been resolved after consulting the following SAP Note Documentation:
SAP Note: 1585226 - BPM UWL Connector Failure
Kindly Check whether the proxy settings are done correctly and http.nonProxyHosts has proper entries as explained in the note 1507174. (Proxy settings for the J2EE engine). You NEED to have SSO configured as in a case with 730, absolutely no user mapping should be used on webflowconnectors.
Kindly update me as per your findings.
I greatly appreciate your time and patience and I look forward to recieving your reply.
Kind Regards & All The Best
Troy Cronin - Enteprise Portal Support Engineer

Page w/3 Iviews will not display all iviews thru Portal Role?

Hello All,
I am having a problem with getting 2 of 3 iviews to display through my portal role(s). 1 of the iviews is a copy (generated thru the wizard with same properties) of the SAP Bank information iview and the other 2 I created in the KM content (1 is an image and the other is html). If I preview the page, I see all 3 of my iviews with no problem.
Just a little history, I created a new area page called payments which I tied Bank Information and w-4 to via config in the back end. I z copied all my resources and tied the correct PCD to them.
It almost seems that it is still calling the SAP delivered Bank information? But, I checked all my config and nothing that is configured is pointing to there iview/page?
Any suggestions would be greatly appreciated.
ESS 1.0 - EP7.0
Thanks,
Mike

Hello Priya,
Thank you for getting back to me so quickly on this. I did create a z copy of the bank information service and called it z_employee_bank_us_serv05. I created the iview with application name 'per_bank_us' and as for the 'Application Parameters', I did not fill anything in which leads me to my next question.
I know when I create a new area, that I need to fill in the application parameters of the path to the 'Area group pages'
(Example: sap.xss.menuarea=Z_EMPLOYEE_BENEFITPAY_ERP2005&sap.xss.menuargrp=Z_SAPDEFAULTESS_ERP2005&sap.xss.menuhdr=SAPDEFAULT),
What would the verbage that would need to be added to the application parameters for this just to point to the service?
THX

New tasks not displayed in Universal WorkList

Hi,
I am able to see the leaves request till last weekend, after that suddenly my open tasks list is empty while I am still getting mails from the backend asking me to approve the leaves applied. But I am not able to do that as I am not able to see on the portal open task list.
Kindly help.
Thanks,
Shruti

Hi all,
This thread is similar to the issue I'm having so I wanted to share the issue I'm having.
We have a strange issue where leave requests are not appearing in the UWL for a specific manager. We have checked with other managers and the leaves are appearing in their UWLs and they are able to process their employee's leaves without any issue.
For the manager not seeing the leave in their UWL, I have confirmed the following:
1) Proper manager defaults in 'approver' field in ESS and employee is able to send leave request without issue
2) Manager receives email to process employees leave request after RPTARQEMAIL program runs
3) Leave is reaching the manager's business workplace in R/3 so this verifies workflow is working and the leave is being directed to proper manager for approval
4) Proper roles have been assigned to manager and verified in PRD
*Also, the leaves were appearing in the manager's UWL at one point but no longer appearing. This makes it more confusing!
Does anyone have any suggestions/ideas as to what may have happened?
Any feedback would be greatly appreicated!
Regards,
Brian

Input calendar not displaying appropriate size in Portal

We are on SAPGUI ECC6 and Portal 7.0. We haven't implement CRM.
I have designed an ABAP Webdynpro application. The application has an input field with type DATE. When I view the calender using transaction se80 vai the GUI, the size is 100% correct.
I have also created an Iview for this application and when I view the calendar through the Portal the format is wrong and only the current month is displaying.
Aragorn ahs also posted the same problem during October last year, but the question has not been answered.
Any help will be appreciated.
Regards
Margariet

I have change the Supply Portal Stylesheet from yes to No and it fix the problem.
Margariet

Leave not displaying correctly on the Portal.

Hi,
The leave displayed in IT 2006 and PT50 are more than what is displayed on the Portal.

Hi
pls check if your portal is pointing to the correct backed system, also check if you refresh the ivew does it change.
Regards
sameer

BPS Layouts not displaying in the CRM Portal

HI Friends,
I have configured Layouts in the BPS, i added 0keyfg_flag in the layout and enahced the layout in the UPX_MNTN and in the CRM system maintain RFC destination and assigned planning profiles to planning profiles gropu also, all the steps i fallowed which are mentioned in the " How to integrate bps layouts in the CM portal". when i looked at in the crm UI i don't find the layouts diplayed in the CRM portal, but CRM UI recognizeing the BPS variables which are used in the BPS planning levels,
but i don't see the any layouts in the CRM front end, if anybody has any expericence please share your ideas, how to solve the issue.
Thanks
Best regards
SG

Hi SG,
Its good that you are able to assign the planning profiles created at bw end in CRM system to ur planning groups. But I am stuck here itself.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications for CRM & BI Integration, yet to start the configuration of TPM in CRM.
Thanks.

Custom Portal Service not displayed under Service Configuration

Hi All,
I am working on EP 7.0 SP8.
SAP Portal is not displaying any custom built Portal Services under Service Configuration tab.
I checked with the permission, and I am having the required authorization for my service.
I am not able to find any document on making the custom service available under Service Configutation to start/stop the service.
Please let me know any reference docs on this.
-Thanks,
Pavan

Hi Pavan,
> working on EP 7.0 SP8
Glad to hear that you are not stuck on EP5 No, really, that is older than old... Anyhow:
> not displaying any custom built Portal Services under Service Configuration tab
There services are only listed if they are configurable, i.e. if they have a service profile with at least one property (compare http://help.sap.com/saphelp_nw70ehp2/helpdata/en/df/e6b74253ffda11e10000000a155106/frameset.htm). Otherwise it makes less sense to restart a service (normally this is done after changing a service profile parameter).
Hope it helps
Detlev

Info View Public Folder not displayed

I have installed BO XI r2 and have configured two users in the CMC within a development environment with 35 named licenses. When i start Info View and log in as a new user the Public Folder is not displayed only Inbox and the Personal folder. Anybody know why the Public folders are not displayed. Permissions?
I have not changed any settings for Admin or Everyone and setup the new user by adding them to an existing group with full control.

It's a permissions issue most likely, you need to give the Group this users belong to minimum View rights on the Root folders.
go to CMC>Folders>Rights

Appraisal task not displayed in inbox of portal

Similar Messages

Maybe you are looking for