Approval Date and Time of Time cards

Hi,
I know that Submission of timecard date can be retrieved from HXC_TIMECARD_SUMMARY, the field name is SUBMISSION_DATE. Please help me find the APPROVAL_DATE of the timecard. I need the table and field name of that.
Thanks
SA

Run the below query and you will each row for approved and submitted status
SELECT *
FROM HXC_TIME_BUILDING_BLOCKS
WHERE resource_id = p_resource_id'
AND scope = 'APPLICATION_PERIOD'
AND start_time = '24.apr.2009'
ORDER BY start_time desc;

Similar Messages

Approval Date and Time of the Timecard

Hi,
In one of the reports, we require to show the date and time when the timecard is approved. Where can I find this information.
Thanks,
Ramprasad.

Try the HXT_TIMECARD_BUILDING_BLOCKS (or similar name, I may have got the name slightly wrong). This is the main table for holding the data which makes up the timecard. I think approval info is in there somewhere. This table has the concept of 'scope' and there are many records of different scopes (timecard, period, date, day etc.). Each has an approval field because part of the timecard may be approved and part may not. Also, there are a couple of summary tables which hold details at timecard and application period (applications using the data and the period of the timecard) which you may want to use.
If that doesn't help, use eTRM and see the relationships of the tables and you'll find what you are looking for.
Regards
Tim

HT1551 I need to set up date and time on my apple tv.... Not doing it automatically ... I am connected to a router that works on a wireless sim card

I need to set up date and time on my apple tv.... Not doing it automatically ... I am connected to a router that works on a wireless sim card ...

OK.
Go into Settings on the Apple TV and then General-> Time Zone.
Turn OFF automatically and put your location in manually under Time Zone.

How do I import photos from a memory card that didn't have the date and time set yet?

Aloha,
So I got a new 5dmark 3 and I was shooting a wedding and didn't set the date and time before I started shooting. When I uploaded the images to Lightroom they uploaded all over the place and not in order. Is there a way to upload to lightroom and keep them in order?
THanks so much,
Eric

You can change the sort order to filename. That's what I prefer to use, and it keeps my images in shooting order.

Mag Safe power cord sparks when connected or disconnected--whereupon the MacBook Pro 13'' dumps date and time, and all passwords, plus any/all unsaved information.

I purchased my MacBook Pro 13" from the Apple Store in Tucson, AZ, in mid-January. Since then, every time the Mag-Safe cord is jostled, not even disconnected, sparks fly from the power terminal on the computer, the computer shuts down, and dumps its passwords, as well as the date and time.
Any work in progress is also lost.
I work overseas, and Apple's advice was to give them my credit card number, await shipment of a new power supply and cord, and then, when I return the old power supply and cord, i'd receive a credit. That won't work, as packages from the US to my location take weeks if they arrive at all. There is no Apple Store within a reasonable distance. Or, Apple suggests, when I'm home on leave in mid-June, I should bring the computer to the Apple Store for repair--I have only days in which to do that, but I suppose I'll need to try. My concern is that I'll need to return overseas without my computer and won't be able to retrieve it for months, until my next leave.
This issue shows up elsewhere online. Is there a short in the power terminal in the computer, or on the Mag-Safe power cord, or within the computer itself? It's a known issue, thus I wonder why it hasn't been fixed.

Odd, but here's a copy of Page 1 of the links I got:
Apple Portables: Troubleshooting MagSafe adapters26 May 2011 ... If the spark comes from somewhere other than the blades of the plug, .... Apple Portables: Reducing cable strain on your MagSafe power ...
support.apple.com › Support - Cached
Apple - Support - Discussions - Magsafe sparked when plugging into ...
2 posts - 2 authors - Last post: 22 FebI plugged my magsafe adapter into my macbook pro (mid 2010 model i think ...
discussions.apple.com › ... › Power and Batteries on a MacBook Pro - Cached
Mag Safe power cord sparks when...: Apple Support Communities6 Jun 2011 ... Mag Safe power cord sparks when connected or disconnected ...
https://discussions.apple.com/message/15350172
Show more results from apple.com
Apple power brick sparks lawsuit • The Register
- 4:52am6 May 2009 ... Apple power brick sparks lawsuit ... Apple, for its part, made the MagSafe one of the featured, um, features of the MacBook Pro when it ...
www.theregister.co.uk/2009/05/06/apple_magsafe_lawsuit/ - Cached - Similar
My MagSafe sparks everytime - Philippine Mac Users Group
10 posts - 6 authors - Last post: 31 Mar 2008Guys, I seem to have a problem, well you see my MagSafe sparks everytime I plug it into a power source. I'm experiencing this problem at ...
www.philmug.ph › ... › Mobile Macs › Archives - Cached - Similar
@apple MagSafe failure sparking all over the place, not recalled ...1 Jan 2011 ... ryanol: @apple MagSafe failure sparking all over the place, not recalled? Not repairable 79 bucks later #applefail another design fail for ...
constantlycomplaining.com/.../@apple-magsafe-failure-sparking-all-over-place,-not-recalled%3F-not-repairable-79-bucks-later- - Cached
Great Northern Insurance Company sues Apple over fire-causing MagSafe2 Dec 2010 ... Over the past few years, Apple has been on the receiving end of more ... indicating that Apple's MagSafe adapters were prone to sparking and ...
www.edibleapple.com/great-northern-insurance-company-sues-apple-over-fire-causing-magsafe-adapter/ - Cached
Amazon.com: Apple MagSafe 60W Power Adapter for MacBook MA538LL/A ...Genuine Apple 60W MagSafe Power Adapter for MacBook A1184 · 3.9 out of 5 stars (11) .... like it was burning.. the covering on the cord melted off.. sparked ...
www.amazon.com › ... › Laptop Battery Chargers - Cached - Similar
Insurance company claims Apple's 'dangerous' MagSafe started fire ...
40 posts - 29 authors - Last post: 30 Nov 2010A newly filed lawsuit claims that Apple's MagSafe charger, ... Apple to heating, burning and sparking problems with its MagSafe adapters," ...
forums.appleinsider.com › Future Apple Hardware - Cached
Spark it up!!! "Apple announces Magsafe out of warranty ...
3 posts - 3 authors - Last post: 19 Aug 2008Info.: "This one concerns faulty Magsafe power adaptors that shipped with MacBook (13-inch Late 2006), MacBook (13-inch), ...
forums.macresource.com/read.php?1,546534,546743 - Cached

Date and Time Sync at boot for Active Directory/Open Directory Authenticati

All the macs in my school district are set to automatically sync their time with a network time server. They do not do this unless the system preference is opened. This poses a problem as all our users must authenticate against an Active Directory and an Open Directory server. If the time is out of sync they can not login, and therefore can not fix the time. I must then login in with a local admin account set the time and then the network account can login. I have tried using direct IP addresses for the NTP server. That doesn't work either. I have adjusted the tolerance of the AD server to accept a large discrepancy in time (did not work). Set the users to be mobile accounst (local home folders), did not work. The only fix will be to ensure that the time does sync at boot, before login. Is there a way to force the computer to sync at boot to a given NTP server, prior to the login window appearing?

I have come up with my own solution for this issue. It is a two part solution. We found that the computers are experiencing time drift and that after they get out of sync by 5 minutes they can no longer login. One would think that the setting in the Date and Time system preference to automatically synchronize the time would take care of this. That however is not the case that check mark does not affect the ntp service at all. It merely eliminates the need to click a button when entering the system preference. How did we discover this? well that is part of the solution. We used webmin (http://www.webmin.com) to look at the ntp configuration. No matter what changes we made with the Date & Time preferences nothing changed in the system ntp settings. So on to the solution: Install webmin, and configure the ntp protocol manually to sync at your desired interval (I did hourly). This stops time drift. Next create a startup item and associated plist to force time sync at boot (be sure to loop it as different machines initialize their network cards slower). I have made ours available for download (http://www.manheimcentral.org/~getzt/netTime.zip). I hope this helps others. We have found that this works fairly well.

How can i have the date and time show up on my canon vixia hf m50

Cannot get the date and time to show up onscreen in ANY videos on my new vixia HF M50. Can somebody help me on this?

Hello Jerrysulew,
You can show the date and time using the Captions option. The process is described below.
Add a new level of enjoyment to your scenes by decorating them. You can add animated graphics, stamps and even your own freehand drawings. The supplied stylus pen will be especially useful for decorating scenes.
You can decorate scenes as they are being recorded.
IMPORTANT
The screens and settings that appear may differ depending on the model you are using.
NOTE
You can open the decoration screen when the LCD panel is stowed with the LCD screen facing away from the camcorder. In such case, make sure [Autostart Decoration] is set to [On].
Decorating Scenes while Recording
1. Touch [
2. Touch [Decoration].
3. The decoration mode screen appears.
On the decoration screen, there is a canvas where you can draw freely, and a toolbar with tools lined up for creating your drawings.
Select the tool you want to use from the toolbar, and make drawings on the canvas.
Icon
Tool name
Function
Pens and Stamps
Select the type of pen or stamp and its color. You can also save a canvas or load a previously saved canvas.
Animated Stamps
Select animated stamps to add to your decoration.
Captions
Add the date, date and time, story title* or story theme* as a caption that will be included in the recording.
Image Mix**
Choose one of 27 different frames to add onto the canvas. Image mix can be used in combination with the pens, stamps and animated stamps.
Freeze screen**
In recording mode: pause the live video. Touch [
again to restore the live video. You can add decorations to and record the frozen image.
In playback mode: pause the playback. Touch [
] to resume playing back the scene.
Minimize toolbar
Minimize the toolbar to the top of the screen to view almost all of the canvas. Touch [
] to restore the toolbar.
* Not available in
mode.
**Not available in
mode and for MP4 movies.
4. Use a tool from the toolbar as explained in the following procedures.
5. PressYou can add decorations even while recording a scene.
6. Touch [
] to exit the decoration screen.
NOTE
For AVCHD movies, decorations will appear in the thumbnails of scenes in the [ AVCHD Movies] index screen and gallery. For MP4 movies, decorations will not appear in thumbnails.
To use [Pens and Stamps]
1. Touch [
The [Pens and Stamps] screen will appear.
2. Select the desired pen or stamp from [Tools].
Select Colors.
Touch [
Select white or black from [Colors].
Alternatively, you can touch [
] and select a color from the displayed colors.
3. Draw freely on the canvas.
Touch [
] > [Clear] > [Yes] to clear the canvas and start again.
NOTE
The canvas with decorations can be deleted, saved, and loaded.
You can save the decorated canvas right after a decorating action.
If the memory that contains the canvas is initialized, the canvas will be deleted.
To use [Animated Stamps]
1. Touch [
2. Touch one of the control buttons.
3. Touch anywhere on the canvas to place the selected animated stamp. You can also drag some animated stamps to a different location.
NOTE
When the [Animated Stamps] tool is used, the date/time will not be displayed or recorded.
To use [Captions]
1. Touch [
2. Touch [Date] or [Time].
When recording a scene using Story Creator, you can also select [Title]
(the story&&&&&&&&&s title) or [Story Scene] (the story scene category).
3. Select the desired text settings and touch [
Touch [
] (white text on dark background), [
] (white text) or [
] (black text).
Touch the caption and drag it to the desired location.
To use image mix
1. Touch [
] to open the [Select Image] screen.
2. Touch [ON].
3. Touch [+] or [-] to select a different image mix frame.
You can touch one of the memory icons at the bottom of the screen to read image mix frames saved on a different memory (When recording on or playing back scenes from a memory card).
Touch [
] to mix the selected frame with the live video.
NOTE
When [Rec Media for Movies] is set to [
] (the built-in memory), you will not be able to select image mix frames saved on a memory card (For camcorders that have internal memory only).
For AVCHD movies, image mix cannot be selected during playback or while converting a scene to standard definition (For camcorders that have internal memory only). Select the image mix during playback pause or before starting the conversion.
To use freeze screen
1. Touch [
The control button will change to [
] and the picture will be frozen.
Decorate the screen using the other tools in the palette.
2. Press the
The decorations created will be recorded with recording scenes that are on pause.
Press the
Touch [
]. The screen will return to normal.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Date and Time Submitted in Task Notes to show in Project Pro 2013

I wonder if anybody could assist.
I am running PWA 2013 and Project Pro 2013
When a resource updates a task on PWA and creates/updates the notes on the task, it pulls to the notes section for the task in Project Professional. This is great but…
Is there a way to pull the Date and Time Submitted next to the resources’ name in the note too?
I would appreciate any assistance.
Many Thanks :)

Hi,
I don't think this is feasible out-of-the-box. Note that the information is available in the task details when you click on the task (either in the task update page or in the approval center).
A workaround would be to train the users to start their comments by typing their initials and the date-time.
Another way more complex would be to do some custom code.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

"Adjust Date and Time..." will convert your TIFFs to JPGs!!!

I wanted to let everyone know of a serious bug that I've been discussing in the following thread: [http://discussions.apple.com/thread.jspa?threadID=1315705&tstart=0].
Here's the bug. If you use the "Adjust Date and Time..." function on a TIFF file, and have iPhoto modify the original file, iPhoto will make the time adjustment, but it will *save a JPEG over your original TIFF, with the original .TIF name!!!*
Big nasty bug. After you do this function, you have lost all that lossless TIFF data since your pictures was overwritten by a lossy JPG!
nathan

nathan:
What type of edit were you making. Have been trying to duplicate that and cannot. I've changed the date and selected the original file to be changed also. Then I edited the file by cropping, changing the exposure and shadows and saving. Both versions are still tiff files.
Now these are tiff files that I converted over from jpgs with Photoshop as my camera doesn't take tiffs. Don't know if that will make any difference.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Does anyone encountering date and time reset to de...

Hello to all Pureview 808 lover,
I taken out my SIM card from my Pureview 808 during the weekend and left it turn off over the weekend.
(with battery pack attached and it happen many time)
On Monday, when I put back my SIM card and found the date and time of my Pureview 808 is reset back to default.
So, I just wonder it is nature of the design or the clock battery is weaken ?
Regards
Anderson

Yes, it can be fixed, but it's not an easy task.
It depends on the iMac you own. To have an idea have a look at this guide

Credit block and release Date and time

Dear All,
I require a report which can display credit block status date and time and credit release status date and time for sales order. I have gone through the report RSSCD100 with object class VERKBELEG.It is not fullfilling the requirement as it only display change information.
If customer has already exceeded the credit limit and new sales order has been generated then this report will reflect its blocked status.
Kinldy help
Thank you,
NoMi

Hi,
IF it is not mentioned in single program .
You can develop a query by using multiple program. Please find the list of programs for CM
+Reports for Credit Management+
The following table provides an overview of all the reports available to you in the area of credit
management
Program Function
RFDKLI10 Customers with missing credit data
This report checks the data for the credit limit for completeness, and produces
the corresponding error lists. These can be used to re-maintain the
corresponding definitions manually, or per Batch Input.
RFDKLI20 Reorganization of credit limit for customers
This report enables you to reorganize the credit limit information in the control
areas.
RFDKLI30 Short overview credit limit
The report lists the central and control area-related data per customer.
RFDKLI40 Overview credit limit
The report provides you with an extensive overview of the customeru2019s credit
situation.
RFDKLI41 Credit master sheet
The credit master sheet enables you to display and print out the customer
master data for a single account, which is needed for the area of credit
management.
RFDKLI42 Early warning list
The early warning list enables you to display and print out customers in credit
management, who are viewed as critical customers in the area of credit checks
in SD.
RFDKLI43 Master data list
The master data list enables you to display and print out customersu2019 credit cards.
In particular, you can display information not contained in the standard system,
for example, user-defined fields or external data, which you have created with
specific additonal software.
RFDKLI50 Mass change credit limit data
This report allows quick mass change for master data in credit management.
RFDKLIAB Change display, credit management
With this report, you can display changes for credit management master data for
all accounts.
RVKRED06 Checking blocked credit documents
The report checks all blocked documents from credit view. The report is started
in the background, and should run after the incoming payments programs.
FI/SD - Credit Management/Risk Management SAP AG
Reports for Credit Management
RVKRED77 Reorganization credit data SD
The report enables you to reorganize open credit, delivery and billing document
values. It is used, for example, when updating errors occur.
RVKRED08 Checking sales documents which reach the credit horizon
The report checks all sales documents, which reach the dynamic credit check
horizon, as new. The report runs periodically, and should run at the start of a
period. The period for the u2018date of the next credit checku2019 is proposed from the
current date, with the help of the period split for open sales order values.
RVKRED09 Checking the credit documents from credit view
Released documents are only checked if the validity period for the release has
run out (number days).
RVKRED88 Simulation reorganization credit data SD
REgards,
Krishna O
Edited by: Krishna O on May 20, 2010 11:30 AM

TS1368 My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Reseting the date and time on photosmart 5510

Having replaced the internal battery,the date and time on scanned items to memory card is giving 1st january 2001.how can i reset this.

Hey @dube55,
I am aware that your Photosmart model does not have a fax. Because I do not have a Photosmart 5510 here and have no access to the Embedded Web Server I gave you the generic tab options. My apologies for the confusion.
The Date and Time option under the Embedded Web Server for your printer should be located under Settings or Tools. It may be under a sub-menu on the left hand side, such as System or Preferences. Feel free to click on the options to explore what you are able to alter on your machine.
If you still do not see a Date and Time option we will need to run a Power Reset on the printer. Doing so should prompt you to enter the date and time when reconfiguring your printer. If this fails, we may need to run a Factory Restore.
How to Perform a Hard Reset:
Turn your printer ON
With the printer ON disconnect the power cable from the rear of the printer for 30 seconds
Plug the power cable back in
The printer should start back up on its own
Once the printer returns to the ready state, try another scan to verify if the time and date stamp is correct
Should the issue persist, please proceed with the reset below.
How to Restore Factory Defaults:
Turn your printer ON
Touch the right arrow button until you see Setup (wrench)
Touch the Setup button
Select Tools
Select Restore Factory Defaults
Choose Yes
Once the Restore is complete your printer should start back up and may prompt you to enter the date and time.
Please let me know if these steps work for you. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Can Iphoto display the date and time of a pic on the pic?

I know I can get info and see a pics info, but can Iphoto display the date and time of a pic on the pic itself?

Use the Photos->Batch Change menu option to set the Title to Date and Time. That will give you what you want under each thumbnail.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Date and Time Settings

I notice date and time settings on some of my iBooks do not hold,but some do...Is there a difference in say the 300 vs the 366/466 or is it just whether or not their battery is good or not, or if they have airport cards and 'set date/time automatically' on?...I read a past post, but not really that clear...Can someone clarify.
Thanks, Rick

PRAM contains the following information:
Mac OS X
Mac OS 9
The iBook should remember which Airport to connect to regardless.
regards
mrtotes

Approval Date and Time of Time cards

Similar Messages

Maybe you are looking for