Apps won't start after iOS5 upgrade for ipad2

Hi, after upgrading my ipad with the latest iOS. when you clck on any apps..it starts and then minimize..when you double click on the home buttom..you will see the apps there. Please advice.

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
Otherwise have you tried closing all apps completely and then seeing if they work when you re-open them ? From the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

Apps won't work after iOS5 upgrade

After iOS5 upgrade, I cant start any apps but Apples own on my iPhone 4. What should I do?

Make sure you're signed into iTunes with your original Apple ID (the one that you used to purchase the apps)
Then Sync (and make sure 'Sync Apps' is checked)
Cheers!

Itunes just won't start after the upgrade

I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

Thanks Katrina. I was able to find what I needed through the link that you provided.
To those that are having this problem, here's what I did to fix this issue:
+If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
+1. Open AirPort Utility.+
+2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
+3. Select the specific firmware version you require.+
+4. Click Download.+
+5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
+6. Choose Base Station > Upload Firmware.+
+7. Select a firmware version and click OK.+
+An important note about installing firmware+
+After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
http://support.apple.com/kb/HT1218
I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

Apps won't start after latest update?

Hello,
I'm on an older 2006 iMac (the one without the black border) and I installed the latest update last night. Now I can't get Firefox, Safari, Mail or apps working properly. When I try to start an app it bounces up and down and then I can't remember what it says but it won't start. Any ideas how to fix this? I'm thinking of downloading Firefox and Safari on my sister's computer and then transferring them via my memory stick.
I also tried a restart. Last night I just shut it down and walked away and figured I'd deal with it when I get home from work today.

Hi, first I hope you have your important stuff backed up!!?
I would & always do Repair Permissions Before & after Updates, so I would try the RP ..
Then I would go the SMC route, specific for your model..
If after that you still have "issues" You may need to go the Archive & Install route..
Links:-
http://kb.iu.edu/data/aoxn.html
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1710
Hope this Helps.....L

WCS won't start after Linux Upgrade

Hi,
I've just upgrade RH to v5.0 and it all seemed to go fine except WCS won't start. I was running v5.0.56.0 on RH v4.0 (I know it's not supported) on a WLSE appliance, which ironically seemed to be fine. Now I get this....
Database server is running
Apache server is stopped
WCS is registered, but not initialized.
The Server seems to be unavailable. The possible reasons are
1. The server is not running yet.
2. The server is hanging.
3 The server has crashed.
If the server has crashed or is hanging
Please report the issue and follow the instructions to restart it.
1. Run StopWCS to stop all WCS processes.
2. Run StartWCS to start the WCS server.
3. If the server still fails to start, or you still get this
message, then reboot the machine.
Any suggestions will be most welcome.
Thanks
Scott

Hi Lucien,
Thanks for the suggestions - unfortunately I can't get dbadmin to do anything;
[root@nlcwcs1 bin]# dbadmin ?
-bash: dbadmin: command not found
[root@nlcwcs1 bin]# DBAdmin ?
-bash: DBAdmin: command not found
[root@nlcwcs1 bin]# dbadmin.sh
-bash: dbadmin.sh: command not found
[root@nlcwcs1 bin]#
Am I in the right directory?
[root@nlcwcs1 WCS5.0.56.0]# cd bin
[root@nlcwcs1 bin]# dir
aclProtocol.sql upgrade_2.2_b.sql
Backup upgrade_2.2_c.sql
Backup.lax upgrade_3.0-3.1.sql
CVS upgrade_3.0_Beta1_Beta2.sql
DBAdmin upgrade_3.0_Beta2_Beta3.sql
DBAdmin.lax upgrade_3.1-3.2.sql
dbadmin.sh upgrade_3.2_Beta1_Beta2.sql
EULA.html upgrade_4.0_Beta1_Fcs.sql
If I am, can you tell me how to use these commands please?
Many Thanks
Scott

[BDB/OpenLDAP] OpenLDAP won't start after BDB upgrade

After upgrading to BDB 4.6.21-1, my OpenLDAP-server doesn't start anymore displaying some error about environment mismatch. When upgrading BDB I saw the message I needed to upgrade the database, but that didn't work because the environment versions were different. (I've been trying to get this sh!t running for over two hours, deleted the database files in the meantime so I can't reproduce the error anymore ..)
According to JGC in http://bbs.archlinux.org/viewtopic.php?id=31375, where somebody has a similar problem, the following should be 100% working:
1) /etc/rc.d/openldap stop
it is stopped, wouldn't even start after reboot
2) slapcat -l /root/ldif
I made backup yesterday using this method
3) pacman -S openldap
local version is up to date
4) rm /var/lib/openldap/data/* (though you could keep a backup of DB_CONFIG)
check
5) slapadd -l /root/ldif
bdb_back_initialize: BDB library version mismatch: expected Berkeley DB 4.6.19: (August 10, 2007), got Berkeley DB 4.6.21: (September 27, 2007)
backend_init: initialized for type "bdb"
slapadd: slap_init failed!
6) /etc/rc.d/openldap start
it doesn't start (Fail). Starting manually with debugging on level 255, I get the following:
[root@kitten openldap]# /usr/sbin/slapd -f /etc/openldap/slapd.conf -d 255
@(#) $OpenLDAP: slapd 2.3.38 (Sep 29 2007 14:38:33) $
tobias@T-POWA-LX:/home/tobias/Install/Arch/arch-cvs/extra/daemons/openldap/src/openldap-2.3.38/servers/slapd
daemon_init: <null>
daemon_init: listen on ldap:///
daemon_init: 1 listeners to open...
ldap_url_parse_ext(ldap:///)
daemon: IPv6 socket() failed errno=97 (Address family not supported by protocol)
daemon: listener initialized ldap:///
daemon_init: 2 listeners opened
slapd init: initiated server.
slap_sasl_init: initialized!
bdb_back_initialize: initialize BDB backend
bdb_back_initialize: BDB library version mismatch: expected Berkeley DB 4.6.19: (August 10, 2007), got Berkeley DB 4.6.21: (September 27, 2007)
backend_init: initialized for type "bdb"
slapd destroy: freeing system resources.
slapd stopped.
connections_destroy: nothing to destroy.
Any help appreciated, I really don't know what to do about this!

Someone opened a bug report for it already. Glad I'm not the only one with this problem http://bugs.archlinux.org/task/8311

MacBook Pro won't start after being off for two months

I had to store my MacBook Pro for two months while I was traveling and shut it down completely. Ow that I am back it won't start up. Figuring the battery was flat, I plugged it in. No light came on the power cord and I wasn't able to start up the computer. I bought a new power adapter...still nothing. I have tried the SMC reset. No luck.. Any ideas?

• Already tried that.
Yes you did, and you said so in your post. Sorry - my fault I did not read the complete post.
What model MBP is this? Removable battery?

Won't start after recent upgrade

Started the recent upgrade. A depiction of the apple tv and usb cable connected on one end to tv and other end pointing to iTunes icon then showed up on the tv screen. Let run overnight and still will not connect. I am pretty sure battery in remote is fine; remote was working fine before the upgrade.

The update has failed.
You need to connect to iTunes on a computer with a cable.
Using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

Safari won't start after Yosemite upgrade

Safari won't connect to internet after upgrading to Yosemite

Go step by step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Deselect Proxies if selected.
   System Preference > Network > Advanced > Proxies Tab
   Under "Select Protocol", uncheck any box if selected.
   Click "OK" then "Apply”.
3. Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Caches > com.apple.Safari > Caches.db
    Right click the Caches.db file and select "Move To Trash.
    Close windows and relaunch Safari.
4. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
5. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.

App store account corrupt after ios5 upgrade

After upgrade to ios5 my app store account seems corrupt.
1: My purchased apps disappeared BOTH from phone AND from app store. There are no apps listed under Purchased inn App store.
2: I cannot download any apps. My App store account expects me to fill in "a valid US address" to let me. Since I live in Europe, this is obviously difficult. Result is: no apps for me - no reloads, no updates, no new ones.
Any known fixes?
Thanks

I had similar problems.
I noticed that there where a lot of other applications than App store that were struggling with internet connectivity as well. I was using Wifi at the time.
So I thought; maybe its not a problem with the apps, but with the Wifi.. Sure enough, as soon as i plugged my laptop into the router with a cable, everything worked a 100%.
When I switched back to wifi, it went back to the previous crappy state.
But it seems like I managed to fix this as well, while being connected to Wifi and no cable:
-Go to System preferences
-Network
-On the top of the window, there is a drop down menu for switching "location".
-Select Automatic
And that did the trick for me.. My location was set to something else than "Automatic", some Netflix trickery I've done a long time before updating to Yosemite...
Hope this can help you as well:-)

Apps won't open after IOS5. Re-synced but still won't open. Is there a way to delete them and then reload them again?

I had no problem in downloading a free app after updating to IOS5. I thought everything was o.k. but when I tried to launch an app, it just blinked and nothing happens. I had a notification before updating to IOS5 that I should back up my app purchases. All of the apps I had were free so I ignored it. Well, that appears to be my problem. Now, my Ipad shows the apps but they don't work. Is there a way to delete them so that I could reload them again?

Did you try syncing with iTunes again since you update the software? You could try that first. connect the iPad to your computer and sync again - not WiFi sync - traditional, old fashioned sync. You will have to turn off WiFi sync in iTunes and then hit the apply button.
Or you could try these basic troubleshooting steps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

IPad won't start after iOS7 upgrade and reset

Hi,
I have just tried to upgrade to iOS7 through WiFi. No luck. So I upgraded via iTunes. When it finally was finished, I tried to turn on my iPad, but it wouldn't. It gets stuck at the Apple logo with a loading bar just under it. I did a full reset on iTunes and I can only get to the loading bar (which won't load).. Any suggestions?

I was experiencing the same thing. This article worked for me, hopefully it will help you.
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
Hold both the home button and the wake/suspend button down at the same time. You should see the Apple logo appear on your screen after holding these buttons down a couple of seconds, which means your iPad is booting up and should be good to go in a few more seconds.

ITunes Won't Start After Airport Upgrade

After running the latest upgrade to Airport Utility and upgrading the firmware on my Airport Extreme, I lost all access to my iTunes library that is housed on a Drobo attached to the Airport. When trying to start iTunes, I get error "13005".
I normally access my library from both a Windows XP/SP3 box and a MacBook. I have tried the following steps:
1) deleted genius.itdb and extras.itdb.
2) Repaired iTunes install.
3) Removed and reinstalled iTunes.
4) Plugged the Drobo directly into the Windows box (no airport or USB hub).
Still no love. I was able to rebuild my library via my MacBook, and I created a Windows XP user account which can successfully run iTunes and see the library once I rebuilt it. However my main XP account (with Admin access) still cannot start iTunes.
Any thoughts would be greatly appreciated. Thanks.
Fogbert

Thanks Katrina. I was able to find what I needed through the link that you provided.
To those that are having this problem, here's what I did to fix this issue:
+If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
+1. Open AirPort Utility.+
+2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
+3. Select the specific firmware version you require.+
+4. Click Download.+
+5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
+6. Choose Base Station > Upload Firmware.+
+7. Select a firmware version and click OK.+
+An important note about installing firmware+
+After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
http://support.apple.com/kb/HT1218
I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

Mac Mini Won't Start after RAM upgrade

Hi, I just tried upgrading my RAM from 1GB to 2GB on my Intel Core Solo Mac Mini. When i hooked everything back up it wouldn't start up. So I replaced the original RAM and the same thing happened. I get to the gray apple screen with the gray spinning wheel and then it just shuts off. What could be my problem? Are their any solutions?

Welcome to Apple Discussions, though I suspect the circumstances could be better!
It's not unusual for 'bad RAM' to cause a system to fail to boot, but the disturbing feature of your problem is that when the previous memory is reinserted, the system continues to fail. What makes it worse is that you describe the system shutting off after failing to boot - that is not a common symptom of something simple like bad memory, and may mean that in the initial upgrade, something was damaged or dislodged, or not reconnected correctly.
I would open up the system again, and disassemble it sufficiently that you can reseat the original RAM which was working correctly prior to the upgrade, then check that everything is connected correctly internally, and the CPU heatsink is firmly attached. If that doesn't result in the system working, or at least in different symptoms such as being stuck on the grey screen but no longer shutting down, then I would look for an Apple store in the area and make an appointment at the genius bar for them to have a look - that would not bear a cost in the first instance for them to give their opinion.

CiscoWorks won't start after LMS upgrade 3.0 - 3.2 ERROR 502 Bad Gateway in Portal

I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.
The upgrade was successful, with no errors, and all services started.
Can anyone help, and check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.
I add the installation log file;
And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.
He added the logs generated by the LMS services Tomcat and Apache

Hi,
Here are the various errors/warning I found while looking through the attached logs.
WARNING:The application that you are installing requires new tasks to be
WARNING:registered with ACS. If you have already registered this application
WARNING:with ACS from another server, you do not need to register it again.
WARNING:However if you re-register the application, you will lose any custom
WARNING:roles that you had created earlier for this application in ACS.
WARNING:Some features in ACS may not work correctly on Dual-stack servers.
Warning: System memory is less than the minimum requirement.This may affect performance.
Warning: Current swap space is less than the minimum requirement. This may affect performance.
WARNING: The available RAM is 4086 MB which is lesser than the required RAM of 4096 MB. User chose to continue the installation
WARNING: Domain Name is not found from TcpIp parameters, setting PX_FQDN same as PX_HOST
INFO: User Selected to Reboot the Machine
Installation Completed at 16:38:06
Nov 23, 2012 7:59:11 PM org.apache.tomcat.util.threads.ThreadPool$ControlRunnable run
SEVERE: Caught exception (java.lang.NoClassDefFoundError) executing org.apache.jk.common.ChannelSocket$SocketConnection@d888c7, terminating thread
[warn] RSA server certificate CommonName (CN) `LOND-CW-MDF-1' does NOT match server name!?
[Fri Nov 23 19:19:46 CST 2012] CMFX - fileLoc is \C:\PROGRA~1\CSCOpx\lib\classpath\md.properties
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =LOND-CW-MDF-1
Cookie value is invalid
LTGateway.run(): connection to LWMS failed, trying again, Nov 23 19:22:28
You have a BUNCH of the ChannelSocket$SocketConnection exceptions.
The next step for you:
Check the running processes via cmd line (pdshow -brief).
Check that all processes are running as expected. If they are then take a look at what is keeping ports open on your box (netstat -anob). From above, the reason may be an application occupying a port LMS needs. Also check the Windows error logs.
Check the following services, they should look like:
Ciscoworks ANI database engine :Manual
CiscoWorks Daemon Manager :Auto
CiscoWorks RME NG database :Manual
CiscoWorks Tomcat Servlet engine : Manual
CW VisiBroker Smart Agent :Manual
CiscoWorks Web Server :Manual
CWCS Cmf database engine :Manual
CWCS rsh/rcp service :Auto
CWCS syslog service :Auto
CWCS tftp service :Auto
DFM dfmEpm :Manual
DFM dfmFh :Manual
DFM dfmInv :Manual
4. Log in as the local Administrator (not Domain).
Stop daemons (net stop crmdmgtd)
CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (Answer when prompted)
navigate to ..\NMSROOT\setup\support
Execute resetCasuser.exe
Start Daemons (net start crmdmgtd) and wait 20 minutes.
Check if condition persists.
5. Check the output of ..\NMSROOT\MDC\Apache\bin>pdreg -l Apache
A couple other things:
Set the server name to be the server name with the domain as well.
Set the primary DNS suffix to match
Modify md.properties & Registry & set PX_FQDN to the above.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
- HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\ResourceManager\CurrentVersion\Environment
Thanks.

Apps won't start after iOS5 upgrade for ipad2

Similar Messages

Maybe you are looking for