AR29N New Valuation of Assets Issue

Need to enter new value for all assets and write back depreciation for a couple of months to a certain date in depreciation area 01, due to an acquisition. So though we could use AR29N to mass update.
Have read the SAP Library documentation. And done the customizing, although I'm still facing an issue.
Our assets have a depreciation method = U % from remaining life calc. from depr. conversion date.
When running AR29N, we get the error message: 'dep.calculation method of key &1 is not percentage from useful life' (Message no. APERB032).
Diagnosis: For the system to be able to correctly determine depreciation adjustments and suitable depreciation values in following years, the depreciation calculation method "Percentage from Useful Life " has to be set in the base method of the depreciation key. This is not the case in depreciation key &1.
Reading the SAP documentation, it seems that using AR29N it is only possible to use assets with depreciation method = D Percentage from the useful life.
Is there any way that we can use AR29N with our assets?
Do we need to change something?
Or what would need to be done?
Any insight and help is much appreciated.
Thanks.

Hi Débora,
We did finally not used AR29N. We used a combination of ABZON, ABZU and finally AS02 to change e.g. Depr.Key + ULYr + ULPeriod & ODepStart Date.
Regards,
Luc.

Similar Messages

  • OKG3 - Create a new valuation method

    Hi All!
    Im trying to create a new valuation method by OKG3 without "Result analysis method" and "Cancel
    Inventory/Reserves with Status" fields filled out. I need these fields in blank but these fields are mandatory.
    Even I change to expert mode its necessary fill out these fields.
    Any idea to resolve this issue? Is it necessary to do any previous configuration?
    Best regards,
    Ricardo Sanerip

    Hi,
    Please go through this building blocks in order to understand need configuration steps
    http://help.sap.com/bp_bblibrary/600/BBLibrary_start.htm
    Best regards
    Medha

  • IPad mini now terrible to use, apple support no help because warranty is up.  All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

    IPad mini now terrible to use, apple support no help because warranty is up.  All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

    need help uninstalling ios8 and going back to 7 where things worked please.

  • New filed in Asset Report

    Hi,
    In asset register business want to see new filed/text information (i.e. Brand name of the asset).  Please let me know how can we add a new file in Asset Master in AR01 or Asset History Sheet reports.
    Please guide me.
    Thanks
    Partha

    Hi,
    I trying to use Brand description the following field & supposed to add this field in screen layout.
    In asset Master (AS03) there filed "Supplementary text"  ANLA_LETXT  Length 50.
    Please suggest me, its possible or right or wrong.
    Thanks
    Partha

  • Error when trying to activate new valuation area - AU158

    Hi,
    I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 08 differ by more than 1 year" (AU158).
    Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
    When I check the settings in transaction OAAR what I see is: area 01 - 2010 and area 08 (newest) - 2008 fiscal year is assigned.
    How can I close area 08? Will I need reopen the 01 area until 2008 fiscal year?
    How can I create the new area with the same fiscal year closing?
    Tks

    Year end closing--AJAB
    FY Change---AJRW
    If you open FY 2008, then you can create new depreciation area through AFBN.
    I guess this depreciation area doesn't generate any postings and this is only for reporting purpose.

  • Error when trying to activate new valuation area.

    Hello forum,
    I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 10 differ by more than 1 year".
    Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
    But when I check the settings in transaction OAAR what I see is that same fiscal year is assigned to all the areas.
    I don´t understand why the system is showing me this error then...How can I ensure all areas to be in the same fiscal year.
    Thanks in advance

    Hi,
    Do you have other company codes which are using the same Chart of  Depreciation? Please check these company codes and perform fiscal  year change to them.
    It seems that the problem is related to note 421549 : the system tries             
    to check the entries for field T093B-ABGJA for all the entries,not                 
    only for the relevant company code. If there's a difference of more                
    than 1 fiscal year between the last closed fiscal year for the area                
    you are trying to create, and one of the entries in T093B, then,                   
    error AU 158 arises."                                                              
    Because according to the note 421549: the system tried to check the entries for field for ALL THE ENTRIES,not only for the relevant company  code.                                                                               
    If there's a difference of more than 1 fiscal year between the last  closed fiscal year for the area you are trying to create, and one of the entries in T093B, then, error AU 158 arises. 
    Regards Bernhard
    Edited by: Bernhard Kirchner on Jul 19, 2010 1:22 PM

  • [FSCM] add parallel valuation area and new valuation classes

    Hi, everyone
    I have a plan to add parallel valuation area and new (general) valuation class for International Financial Reporting Standards. But I have no experience adding another valuation area. Basically, SAP says new valuation area could be added any time. The concept of parallel valuation area also support that. But I am concerning that there could be a problem technically. Even though there would be a problem when I try to transfer valuation class of new valuation area.
    If someone has an experience with these problems, please let me know and prepare that.
    Thanks.
    Best regards.
    Minsun Joo

    OX14 - Define Valuation Area (Tick one only- Once your system go live, no more changes)
                 Most company take the SAP recommended choice - Value Material Stock at Plant level
                 Value Material Stock at Plant or Company Level
              o If you valuate material stocks at plant level, the plant is the  valuation area.
              o If you valuate material stocks at company code level, the company code is the valuation area.
              o The decision you make applies to the whole client.
    Kesh

  • New External Battery/Sleep Issues

    I have a weird one that I can't figure out. I have been using a new external battery for about a week (the old one wouldn't stay charged for more than an hour). Today my computer kept putting itself to sleep (sleep light flashing and nothing else working - not even power button) and not starting up again unless I unlugged it from the wall, took out the battery and then reset the PMU. I took out the new battery and put in my old one and so far so good. I wonder if it really is the new battery causing these issues or not. Any thoughts?

    I'm having this same random sleep issue too!! It's been happening to me a little after I installed Leopard - but I'm not implying that Leopard is causing the issue. My PowerBook still has the original battery. The battery has not shown any indication that it refuses to accept a charge, nor is there any physical damage to the battery or the connectors.
    *I have found an easy way to wake the computer when it does go into sleep.* I used to take out the battery, unplug the power cord if it was plugged in, press the power button and reset PRAM just as an added measure. But when you see it is starting to put itself to sleep, let it do its thing... don't try to stop it. When the white sleep light finally starts glowing, tap the space bar (probably any key will do) just ONCE. Sometime it will bring it back for a second and go right back to sleep mode, in which case I just repeat the steps above. Sometimes it'll last me a few minutes. If it does this repeatedly, then after pressing the space bar (after the sleep light starts glowing), I have noticed a delay in it waking up...I can press the space bar and it will either come back right away, or it may take like 30 seconds until it responds. Through trial and error, I've found that if I press any key more than once, I run the risk of it not coming out of sleep mode period....then I have to go through the whole reset process with the PRAM and all.
    Hope maybe that helps someone
    Has anyone kind of figured out what this could be the cause of? My laptop gets kind of hot sometimes, but it doesn't always force itself into sleep mode when its hot - so it may or may not be a over heating issue perhaps?

  • New Valuation Class

    Dear All
    Please let me know how to create A New valuation class in the system.
    Regards,
    Manish Jain

    Dear Manish Jain,
    To create new valuation class goto the following path.
    SPRO --> Materials Management --> Valuation and Account Assignment --> Account Determination --> Account Determination without Wizard --> Define Valuation Class ---> Valuation class ---> Copy from similar valuation class & enter new valuation class number & description. Also assign the account catgory reference for this valuation class. Account cat. reference which has to be connected to your required material type.
    Regards,
    Shekhar Gaikwad
    ThyssenKrupp Industries India
    Pimpri- Pune - 411018

  • Re :Defining of new valuation types

    Hi All,
    Please explain how to define new valuation types.
    REgards,
    vivek

    HI,
    In case if you want to maintain 2 prices for a single material then we make use of split valuation.
    Example: A typical example i can give is that.
    If there is motor. the motor can be new, used, or broken status.
    So these three valuation types can be created under one valuation category and have different prices for these.say new 5000rs used 3500rs and broken 1500rs.
    The confi. steps are:
    1.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Acitvate Split Valuation
    2.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Configure Split Valuation
    Click on Golbal type: create your own valuation types as Type 1, Type 2 etc
    Click on Global categories:create your own Valuation Category as Type(T) and
    Activate all valuation types(Type1, Type2 ) for your category(T)
    Goto MM01, enter materialu2026u2026u2026u20261st enter valuation category and save & again enter MM01 enter the Valuation type as Type 1 and maintain price for it and repeat the same for all the Types.
    When you create a PO for split valuated material it will ask for valuation type and you can enter your required valuation type and save.
    check the following:
    http://www.sap-img.com/mm025.htm
    http://www.sap123.com/showthread.php?t=29
    http://www.sapficoconsultant.com/Bonus/Split%20Valuation%20configuration.pdf
    http://help.sap.com/saphelp_47x200/helpdata/en/47/61017149f011d1894c0000e829fbbd/frameset.htm
    I hope you got my point.
    Thanks & Regards,
    Kiran

  • Hw to create new valuation class..?

    Hi gurus
    can anybody explain me how to create new valuation class for Some materials types eg finished goods.
    What is valuation class..? were to assign the valuation class after creation..?
    Thanks
    sap-mm

    Hi,
    Goto SPRO->IMG->Materials Management>Valuation and Account Assignment>Account Determination->Account Determination Without Wizard->Define Valuation Classes
    Valuation class means:
    Assignment of a material to a group of G/L accounts
    With other factors, the valuation class determines the G/L accounts that are updated as a result of a valuation-relevant transaction or event such as a goods movement.
    The valuation class makes it possible to:
    Post the stock values of materials of the same material type to different G/L accounts
    Post the stock values of materials of different material types to the same G/L account
    Account category reference is assigned to val.class and val.class is assigned to material type and g/l is assigned to v.class
    Venkatesh

  • Re: Define new business places or issuing branches.

    Hi All,
    I have defined some new business places or issuing branches for one company code. Now I need to do testing for the new defined business places..
    Can some one tell me what need to be tested and included in test document for this requirement. Here is the menu path for defining new business places or issuing branches..
    spro-cross application components-general application function-cross application document numbering-define issuing branch..
    please advice..
    regards,
    chandu

    ooooohh now replays..it's ok
    chandu

  • My daughter accidentally deleted her texting app off of her i-pod 4th generation.  Is there a way to get it back?  Or, is the there a way to re-install or install a new one.  The issue seems to be not being able to load a newer ios.

    My daughter accidentally deleted her texting app off of her i-pod 4th generation.  Is there a way to get it back?  Or, is the there a way to re-install or install a new one.  The issue seems to be not being able to load a newer ios.

    Hello rkoslosky,
    Welcome to the Apple Support Communities!
    I understand that you are not able to locate the Messages application on your daughters iPod touch (4th generation). The good news is that this application cannot be deleted or restricted. The first suggestion I have is to try and search for Messages using Spotlight to search the iPod touch for this application. If Messages is located in Spotlight, then it has probably been moved to a different page of applications or even possibly a folder of applications on the device. Searching all pages will help you locate it. 
    Search with Spotlight - Apple Support
    Have a great day,
    Joe

  • How to create new valuation modifier OBYC

    Hi Friends,
    I need to have new  Valuation modifier  in OBYC.
    How to create new valuation modifier,Please help to know the path.
    Thanks in advance for great hlp.
    RAMAN.

    If I understand Your requirement that You need to give the Account Modifier Like GBB ?
    i.e you need to do different Valuation Grouping code.
    then go to
    SPRO > Materials Mangemtn > Account Determination > Account Determination Without Wizard > Group together Valuation Areas.
    Then when you go to OBYC and Choose the Transaction / Event Ket pop up will ask you to enter the Chart of account
    latter
    under Rules
    you will find Account Modifier , Valuation class and Account Posting key as per your selection you can do.

  • How to setup new valuation class and link it with gl a/c

    hi
    can some one help me setting up new valuation class and then how to link it with gl a/c
    i m new so if some one can explain me in steps then that would b awsome.
    thanx

    Hi Iqbal,
    Follow the below path for defining valuation class ;
    SPRO>Materials Management>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard--Define Valuation Classes
    Note that Valuation class is linked to account category reference.
    Account category ref is linked to Material Type.
    Thus the system determines Valuation Class for a particular mat.type.
    For detmining G/l accounts:
    SPRO>Materials Management>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard--Configure automatic postings
    Click on account assignment. Double click on BSX , enter chart of accounts .
    Against every valuation class you can find the G/L accounts.
    Regards
    Ramesh Ch

Maybe you are looking for