Archive all the active online redo logs

Hi,
in 9.2.0 and in archivelog mode, how can I archive all the active online redo logs ?
Thank you.

Is ur database already running in archivelog mode?? If yes and if automatic archiving is enabled then ur redo will be archived automatically. I think first you need to check whether ur DB is in archive log mode or not?? Post the output of (from sqlplus):
archive log list
Daljit Singh

Similar Messages

When occurs crash recovery,why use active online redo log not archived log?

If current redo log had archived, but it's still 'ACTIVE'. As we all know, archived log is just an archived copy of the current redo log which is still 'ACTIVE', they have the same data. But why use active online redo log not archived log for crash recovery?(I think, if crash recovery can use archived log, then whether the online redo log is 'ACTIVE' or not, it can be overwritten)
Quote:
Re: v$log : How redo log file can have a status ACTIVE and be already archived?
Hemant K Chitale
If your instance crashes, Oracle attempts Instance Recovery -- reading from the Online Redo Logs. It doesn't need ArchiveLogs for Instance Recovery.
TanelPoder
Whether the log is already archived or not doesn't matter here, when the instance crashes, Oracle needs some blocks from that redolog. Archivelog is just an archived copy of the redolog, so you could use either the online or achive log for the recovery, it's the same data in there (Oracle reads the log/archivelog file header when it tries to use it for recovery and validates whether it contains the changes (RBA range) in it what it needs).

Aman.... wrote:
John,
Are you sure that the instance recovery (not the media recovery) would be using the archived redo logs? Since the only thing that would be lost is the isntance, there wouldn't be any archived redo log generated from the Current redo log and the previous archived redo logs, would be already checkpointed to the data file, IMHO archived redo logs won't participate in the instance recovery process. Yep, shall watch the video but tomorrow .
Regards
Aman....
That's what I said. Or meant to say. If Oracle used archivelogs for instance recovery, it would not be possible to recover in noarchive log mode. So recovery relies exclusively on the online log.
Sorry I wasted your time, I'll try to be less ambiguous in future

Open database if an active online redo log is missing

Hi,
Sorry for the rather long post, but I specified all the steps I performed and couldn't make it shorter :-(
I need an advice on how to open the database if an active online redo log is missing.
For test purposes I intentionally performed a shutdown abort when the redo log group 1 was in active state and then renamed its only member (REDO01.LOG) so that the database couldn't perform crash recovery using it. Then upon startup I obviously got the message:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'H:\ORADATA\TESTDB\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.Ok, so I checked the state of the logs:
{noformat}
SQL>SELECT a.GROUP#, first_change#, SEQUENCE#, a.status, SUBSTR(b.MEMBER, 1, 40) MEMBER, b.status mem_status, a.archived
2    FROM v$log a, v$logfile b
3   WHERE a.GROUP# = b.GROUP#
4 ORDER BY a.GROUP#, b.MEMBER;
GROUP# FIRST_CHANGE# SEQUENCE# STATUS           MEMBER                         MEM_STA ARC
     1        592134         29 ACTIVE           H:\ORADATA\TESTDB\REDO01.LOG           YES
     2        592268         30 CURRENT          C:\ORADATA\TESTDB\REDO02.LOG           NO
     3        592129         28 ACTIVE           C:\ORADATA\TESTDB\REDO03.LOG           YES
{noformat}Since opening the database to perform a log switch and thus change the status of the redo log group 1 from ACTIVE to INACTIVE to recreate the member isn't possible, I performed database recovery.
SQL>recover database until cancel;
ORA-00279: change 592129 generated at 02/04/2009 10:31:15 needed for thread 1
ORA-00289: suggestion : C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\TESTDB\ARCHIVELOG\2009_02_04\O1_MF_1_28_%U_.ARC
ORA-00280: change 592129 for thread 1 is in sequence #28
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 592134 generated at 02/04/2009 10:31:28 needed for thread 1
ORA-00289: suggestion : C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\TESTDB\ARCHIVELOG\2009_02_04\O1_MF_1_29_%U_.ARC
ORA-00280: change 592134 for thread 1 is in sequence #29
ORA-00278: log file 'C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\TESTDB\ARCHIVELOG\2009_02_04\O1_MF_1_28_4RLR3JS9_.ARC' no longer needed for this rec
overy
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
'C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\TESTDB\ARCHIVELOG\2009_02_04\O1_MF_1_29_4RLR4MF3_.ARC'
ORA-00279: change 592268 generated at 02/04/2009 10:32:03 needed for thread 1
ORA-00289: suggestion : C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\TESTDB\ARCHIVELOG\2009_02_04\O1_MF_1_30_%U_.ARC
ORA-00280: change 592268 for thread 1 is in sequence #30
ORA-00278: log file 'C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\TESTDB\ARCHIVELOG\2009_02_04\O1_MF_1_29_4RLR4MF3_.ARC' no longer needed for this rec
overy
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
'C:\ORADATA\TESTDB\REDO02.LOG'
Log applied.
Media recovery complete.
SQL>So for log sequence #28 I accepted the proposed archived redo log in the FRA, for sequence #29 (that's the online redo log that is missing!) I manually specified its archived copy, and for sequence #30 I specified the CURRENT online redo log. And as it seems the media recovery was successful.
Next I tried to open the database but again got the error:
SQL>alter database open noresetlogs;
alter database open noresetlogs
ERROR at line 1:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'H:\ORADATA\TESTDB\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
The status of the log groups and its members is exactly as it was in the first query I wrote above, i.e. the redo log group 1 is still ACTIVE, so it's needed for crash recovery (which I had already done manually if I understand correctly how Oracle works!). I also checked if the datafiles are inconsistent (described in metalink doc id 1015544.102):
SQL>SELECT DISTINCT CHECKPOINT_CHANGE#, FUZZY FROM V$DATAFILE_HEADER;
CHECKPOINT_CHANGE# FUZ
            592269 NOSo, everything seems ok as far as datafile consistency is concerned.
My question is: how can I rename/drop/clear/whatever the member of redo log group 1 to open the database?
I tried to rename the log file member, to add another member to it, to open the database with resetlogs, to clear the logfile group 1, but all without success:
1)
SQL>alter database clear logfile group 1;
alter database clear logfile group 1
ERROR at line 1:
ORA-01624: log 1 needed for crash recovery of instance testdb (thread 1)
ORA-00312: online log 1 thread 1: 'H:\ORADATA\TESTDB\REDO01.LOG'
2)
SQL>alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
3)
SQL>alter database rename file 'H:\ORADATA\TESTDB\REDO01.LOG' to 'C:\ORADATA\TESTDB\REDO01.LOG';
alter database rename file 'H:\ORADATA\TESTDB\REDO01.LOG' to 'C:\ORADATA\TESTDB\REDO01.LOG'
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01512: error renaming log file H:\ORADATA\TESTDB\REDO01.LOG - new file C:\ORADATA\TESTDB\REDO01.LOG not found
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
4)
SQL>alter database add logfile member 'C:\ORADATA\TESTDB\REDO01.LOG' to group 1;
alter database add logfile member 'C:\ORADATA\TESTDB\REDO01.LOG' to group 1
ERROR at line 1:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'H:\ORADATA\TESTDB\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.Sorry again for the long post and thank you in advance for any suggestion.
Regards,
Jure

You could check if the recovery was complete by (re)creating the controlfile with the resetlogs option.
<CREATE CONTROLFILE REUSE DATABASE define_db_name RESETLOGS NOARCHIVELOG
...>Thanks for the hint. If possible, could you only check if the steps I'm going to perform are ok.
I did an "alter database backup controlfile to trace;" and then extracted the create controlfile definition part. So in essence I should run the following statements:
CREATE CONTROLFILE REUSE DATABASE "TESTDB" RESETLOGS ARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    MAXINSTANCES 8
    MAXLOGHISTORY 292
LOGFILE
GROUP 1 'C:\ORADATA\TESTDB\REDO01.LOG' SIZE 20M,
GROUP 2 'C:\ORADATA\TESTDB\REDO02.LOG' SIZE 20M,
GROUP 3 'C:\ORADATA\TESTDB\REDO03.LOG' SIZE 20M
-- STANDBY LOGFILE
DATAFILE
'C:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTDB\SYSTEM01.DBF',
'C:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTDB\UNDOTBS01.DBF',
'C:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTDB\SYSAUX01.DBF',
'C:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTDB\USERS01.DBF'
CHARACTER SET EE8MSWIN1250
ALTER DATABASE OPEN RESETLOGS;
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTDB\TEMP01.DBF' REUSE;Is that correct?
About the RMAN backups: Wouldn't a 'CATALOG RECOVERY AREA' populate the controlfile with backup information again (I'm not using a recovery catalog in this case)?
Thanks for the help!
Regards,
Jure

The file structure online redo log, archived redo log and standby redo log

I have read some Oracle documentation for file structure and settings in Data Guard environment. But I still have some doubts. What is the best file structure or settings in Oracle 10.2.0.4 on UNIX for a data guard environment with 4 primary databases and 4 physical standby databases. Based on Oracle documents, there are 3 redo logs. They are: online redo logs, archived redo logs and standby redo logs. The basic settings are:
1. Online redo logs --- This redo log must be on Primary database and logical standby database. But it is not necessary to be on physical standby database because physical standby is not open. It doesn't generate redo log. However, if don't set up online redo log on physical standby, when primary failover and switch standby as primary. How can standby perform without online redo logs? In my standby databases, online redo logs have been set up.
2. Archived redo logs --- It is obviously that primary database, logical and physical standby database all need to have this log file being set up. Primary use it to archive log files and ship to standby. Standby use it to receive data from archived log and apply to database.
3. Standby redo logs --- In the document, it says A standby redo log is similar to an online redo log, except that a standby redo log is used to store redo data received from another database. A standby redo log is required if you want to implement: The maximum protection and maximum availability levels of data protection and Real-time apply as well as Cascaded destinations. So it seems that this standby redo log only should be set up on standby database, not on primary database. Am my understanding correct? Because I review current redo log settings on my environment, I have found that Standby redo log directory and files have been set up on both primary and standby databases. I would like to get more information and education from experts. What is the best setting or structure on primary and standby database?

FZheng:
Thanks for your input. It is clear that we need 3 type of redo logs on both databases. You answer my question.
But I have another one. In oracle ducument, it says If you have configured a standby redo log on one or more standby databases in the configuration, ensure the size of the current standby redo log file on each standby database exactly matches the size of the current online redo log file on the primary database. It says: At log switch time, if there are no available standby redo log files that match the size of the new current online redo log file on the primary database. The primary database will shut down
My current one data gurard envirnment setting is: On primary DB, online redo log group size is 512M and standby redo log group size is 500M. On the standby DB, online redo log group size is 500M and standby redo log group size is 750M.
This was setup by someone I don't know. Is this setting OK? or I should change Standby Redo Log on standby DB to 512M to exactly meatch with redo log size on primary?
Edited by: 853153 on Jun 22, 2011 9:42 AM

Abot loss online Redo log group

Hi,
Is there different from recovering between loss CURRENT online redo log group and ACTIVE online redo log group?
Both of them are needed to incomplete recovery, right?

For CURRENT redolog recovery:
startup mount
recover database until cancel;
alter database open resetlogs;
For ACTIVE redolog recovery:
If the database is still running, force a checkpoint by issuing the following command:
alter system checkpoint;
If above was successful and if the lost group has been archived then issue:
alter database clear logfile group <number of the online redo log group>;
And if the lost group has NOT been archived then issue:
alter database clear logfile unarchived group <number of the online redo log group>;
alter database open;
If the database is not running (crashed) then
startup mount
recover database until cancel;
alter database open resetlogs;
Daljit Singh

Adding online redo logs with standby database in place

Hi group,
I have decided to add one new member to my existing redo log groups and an additional redo log group to my primary database.
That change went ok without problems. I assumed that with standby_file_management=auto the equivalent online redo logs are created on the standby database. But this is not the case.
The documentation is unclear about this point and I did not find anything suitable on metalink. The docs suggest to cancel managed recovery on the standy, setting standby_file_management to MANUAL and then adding online logs, quote:
"To add an online redo log, use a SQL statement such as this:
SQL> ALTER DATABASE ADD STANDBY LOGFILE 'prmy3.log' SIZE 100K;"
This however - IMO - adds a new STANDBY redo log to the standby database, what I need is an ONLINE redo log.
Does anybody have some experience to share here?
Facts:
Solaris 8
Oracle 9.2.0.6
Thanks!
Martin

OK, for those who come across the same problem.
You need to create a new standby controlfile, copy it as well as any new online redo log from production to the standby environment.
Once the files are in place, start the standby as normal and open it read only to see if everything is ok:
startup nomount
alter database mount standby database;
alter database open read only
Only when there are no errors in your alert.log you are safe.
Martin

Clearing Online redo logs on the target physical standby

Hi,
Version 11202.
Primary on machine A
Standby on machine B
Following note: 11.2 Data Guard Physical Standby Switchover Best Practices using SQL*Plus [ID 1304939.1].
Online redo logs on the target physical standby need to be cleared before that standby database can become a primary database. And later :
On the target physical standby run the following query to determine if the online redo logs have not been cleared... 1) I did not understand where i should run the query. On machine A or on machine B ?
2)
Online redo logs on the target physical standby need to be CLEARED
What does it mean that it need to be CLEARED ? Does transaction might be lost by running the clearing command?
Thanks

I have used my note many times in production.
For example they needed to do some power work on the main server room a few months back on the weekend.
We did switchovers until the work was complete and then a switch back.
I wrote a short document called "Switchover post-mortem lessons" the main point from that was :
1.
getting ORA-01017 issues in Oracle forms ( Application ) after the switchover to standby.
The issue was caused by the Standby database having a different parameter for passwords than the Primary database.
This did not show up in testing because all the tester we used had converted passwords from Oracle 10.
Solution
When in doubt issue this on the new Primary :
SQL>ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;
Note: This command can be issued repeatedly with no negative effect on the system.2.
The query to check switch_over status was returning "LOG SWITCH GAP"
select switchover_status from v$database;
This is an issue because Oracle says the return values should be one of these :
NOT ALLOWED
SESSIONS ACTIVE
SWITCHOVER PENDING
SWITCHOVER LATENT
TO PRIMARY
TO STANDBY
RECOVERY NEEDED
LOG SWITCH GAP is not one of the expected value. In addition this phase is not search friendly either on the Oracle support site or your favorite search engine.
Given this I ran this query :
SELECT
NAME AS STANDBY,
SEQUENCE#,
APPLIED,
COMPLETION_TIME
FROM
V$ARCHIVED_LOG;
Solution
SQL>ALTER SYSTEM SWITCH LOGFILE;
And wait a few minutesMy switchover document had no issue.
Best Regards
mseberg

Multiplexing Online redo logs, archive logs, and control files.

Currently I am only multiplexing my control files and online redo logs, My archive logs are only going to the FRA and then being backed up to tape.
We have to replace disks that hold the FRA data. HP says there is a chance we will have to rebuild the FRA.
As my archive logs are going to the FRA now, can I multiplex them to another disk group? And if all of the control files, online redo logs and archive logs are multiplexed to another disk group, when ASM dismounts the FRA disk group due to insufficient number of disks, will the database remain open and on line.
If so then I will just need to rebuild the ASM volumes, and the FRA disk group and bring it to the mount state, correct?
Thanks!

You can save your online redo logs and archive logs anywhere you want by making use of of init params create_online_log_dest and log_archive_dest_n. You will have to create new redo log groups in the new location and drop the ones in the FRA. The archive logs will simply land wherever you designate with log_archive_dest_n parameters. Moving the control files off FRA is a little trickier because you will need to restore your controlfile to a non-FRA destination and then shutdown your instance, edit the control file param to reflect changes and restart.
I think you will be happier if you move everything off the FRA diskgroup before dismounting it, and not expecting the db to automagically recover from the loss of files on the FRA.

Loss of all online redo logs

Hello,
I have been practicing backup and recovery.
How can I recover my database after loss of all online redolog files while the database was open.
Oracle version:-10.2.0.1
OS:- Win(32 bit)
Database is in archive log mode.
Have taken user managed hot as well as cold backup of the database prior to this test.

Try http://www.oracle.com/pls/db102/search?remark=quick_search&word=Loss+of+Online+Redo+Logs&tab_id=&format=ranked
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/recoscen.htm#i1006564
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/recoscen.htm#CACFFJFB
Hemant K Chitale
Edited by: Hemant K Chitale on May 4, 2011 11:34 AM

How to know the delay in redo log apply on Active Dataguard 11g

Hello All,
How to know the delay in redo log apply on Active Dataguard 11g...
Do we need to wait till log switch occurs?
Or is it recommended to schedule a log switch every 15 min, no matter data is updated/inserted or not in primary?
Please suggest...
Oracle : oracle 11g Release 2
OS : RHEL 5.4
Thanks
Edited by: user1687821 on Feb 23, 2012 12:02 AM

Hello CKPT,
Thank you for the valuable information...
We have not configured databroker.
Output of the query
SELECT * FROM (
SELECT sequence#, archived, applied,
TO_CHAR(completion_time, 'RRRR/MM/DD HH24:MI') AS completed
FROM sys.v$archived_log
ORDER BY sequence# DESC)
WHERE ROWNUM <= 10
Primary...
SEQUENCE#     ARCHIVED     APPLIED     COMPLETED
29680          YES          YES     2012/02/23 01:11
29680          YES          NO     2012/02/23 01:11
29679          YES          NO     2012/02/22 23:11
29679          YES          YES     2012/02/22 23:11
29678          YES          YES     2012/02/22 23:11
29678          YES          NO     2012/02/22 23:11
29677          YES          YES     2012/02/22 22:32
29677          YES          NO     2012/02/22 22:32
29676          YES          YES     2012/02/22 22:02
29676          YES          NO     2012/02/22 22:02
Standby...
SEQUENCE# ARC APP COMPLETED
29680 YES YES 2012/02/23 01:11
29679 YES YES 2012/02/22 23:11
29678 YES YES 2012/02/22 23:11
29677 YES YES 2012/02/22 22:32
29676 YES YES 2012/02/22 22:02
29675 YES YES 2012/02/22 21:24
29674 YES YES 2012/02/22 19:24
29673 YES YES 2012/02/22 18:59
29672 YES YES 2012/02/22 17:42
29671 YES YES 2012/02/22 17:41
Primary shows yes as well as no...
Next,
From primary:-
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
THREAD#     MAX(SEQUENCE#)
1     29680
From standby:-
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 29680
What is the redo transport service you are using? is it LGWR or ARCH ?
Output of query select * from v$parameter where name like 'log_archive_dest_2' shows below value...
SERVICE=b_stdb LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=b_stdb
So is it lgwr already configured...? if yes then how do i see the delay in both servers..
Yes, the network is good as they both resides in same LAN within same rack
Thanks...

Size archive log different with online redo log

Dear Experts,
I had a problem with archive redo log size. I saw the size between archive redo log and online redo log is different.
The online redo log on path /oracle/SID/origlogA/log_g17m1.dbf , the size is 280MB, but on archive log the size just 130MB.
Why the size different? How to change the archive redo log?
We are running with Oracle 11.2.0.4.
Please aid me to solve this issue.
Thanks
Edy

Hi,
Yes, all of the size archive logs mismatch with online redolog.
I tried dump the trace file using command "alter database backup control file to trace file" and here is the result:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "SID" NORESETLOGS ARCHIVELOG
    MAXLOGFILES 255
    MAXLOGMEMBERS 3
    MAXDATAFILES 508
    MAXINSTANCES 50
    MAXLOGHISTORY 46720
LOGFILE
GROUP 5 (
    '/oracle/SID/origlogA/log_g15m1.dbf',
    '/oracle/SID/mirrlogA/log_g15m2.dbf'
) SIZE 280M BLOCKSIZE 512,
GROUP 6 (
    '/oracle/SID/origlogB/log_g16m1.dbf',
    '/oracle/SID/mirrlogB/log_g16m2.dbf'
) SIZE 280M BLOCKSIZE 512,
GROUP 7 (
    '/oracle/SID/origlogA/log_g17m1.dbf',
    '/oracle/SID/mirrlogA/log_g17m2.dbf'
) SIZE 280M BLOCKSIZE 512,
GROUP 8 (
    '/oracle/SID/origlogB/log_g18m1.dbf',
    '/oracle/SID/mirrlogB/log_g18m2.dbf'
) SIZE 280M BLOCKSIZE 512
-- STANDBY LOGFILE
DATAFILE
Output ommited
Thanks
Edy

Why the time of the online redo logs doesn't change?

Oracle 11.1.0.7 on windows 2008.I find the time of the online redo logs doesn't change since Jan 18 when I had restarted database,and the time of some datafiles doesn't change either.the database is always online and changes are wrriting to the files, I don't know how this happened?
would anyone help me? thank you.

ROCK wrote:
I found some datafiles have the latest date,but the other not. They all have write/read operations on them.
and the switching of the redo logs doesn't change the timestamps of the logfiles since Jan.18 when I had restarted the database. this situation does not appear on the early 8.1.7 database on windows 2000
Does this situation normal?Hi,
Why dont you post the output of the query you are using such as
select group#, first_time, status from v$log;
select name, last_time, status from v$datafile;
select name, CHECKPOINT_TIME, status from v$datafile_header;Time stamp wont change for offline and may be for temp tablespace.
Regards
Anurag

What is the difference between undo tablespace and online redo log files.

what is the difference between undo tablespace and online redo log files. I am confused
as per my knowledge undo tablespace is used to store the undo information when a table is being updated so that, just incase we need to rollback a transaction we know what was present in the table earlier.
when a transaction fails the SMON performs the rollback of the data.
This undo data is stored in the undo tablespace and read consistency if any is enforced.
is my understanding till here correct?
Now, can this undo data/before image not be stored in the redo log buffer and online redolog files?
can redo-log files not store this information?
in fact, is it that when undo tablespaces exist in a database, the undo data/before image is stored in both the undo tablespace and also the redo log files?
kindly clarify my doubt.
thank you.

This question has been asked many times before. The answer is always the same.
Yes, redo contains the before image of data (and the after-image). Therefore, it **COULD** be used to roll back a transaction.
BUT... Redo is written sequentially. Using it to rollback your transaction would involve reading through all the redo written by maybe thousands of other people. It would be painfully slow.
Your transaction is, however, directly linked to just the UNDO that it generates (which is JUST the before image of the data). So, your undo is your undo and doesn't share space with anyone else's undo. Therefore, using it to roll back YOUR transaction is fast.
The fact that undo is only the before image of the data also makes it faster than wading through a sea of before and AFTER images as you'd find in redo. About twice as fast, in fact, since there's half the data. Roughly.
Redo also gets written and flushed to disk whenever there's a commit, 3 seconds are up or too much (1MB, actually) redo gets generated between flushes caused by other factors. Your redo gets flushed when those things happen, even if you haven't actually committed your transaction. And redo logs recycle themselves, meaning that your redo -even if your transaction hasn't been committed yet- can be over-written by later transactions. Try rolling back when that's happened, if redo was the source of your rollback data!
Undo, however, cannot be over-written if the transaction has not been committed. Ever. If you don't commit for three years, there will be three years' undo stored in your database (assuming you had the space, of course!).
I could go on, but that will do. Redo is there fore RECOVERY, after catastrophe. Undo is there for read-consistency (and the occasional change of mind). Two different functions. Two different mechanisms. Each one highly tuned to doing what it does, why it does it, most efficiently and effectively.

Moving the online redo log files to different location

We just installed few more drives into our sandbox system and I want to move the online redo log files for better performance. We've got the SAPARCH directory moved to a different location.
Does anyone know how/where I can change the parameters so redo log files are pointed at different drives? It's not in the <b>init<SID>.ora</b> file...
Regards,
Sumit

Hi Sumit,
The following link contains information about moving the redo logs:
http://www.stanford.edu/dept/itss/docs/oracle/9i/server.920/a96521/onlineredo.htm
Best regards,
Alwin

TS3367 I cannot get my iPhone 4S to connect to iMessage n FaceTime have tried all the tips online and it's still not working ? It's just saying waiting for activation

I cannot get my iPhone 4S to connect to iMessage n FaceTime have tried all the tips online and it's still not working ? It's just saying waiting for activation

What tips have you tried so far? Just so we don't waste our time telling you things you've already done.
When you respond, also indicate which country and carrier you're using. Also, is your phone brand new? can you make a phone call / access the internet while on cellular?

Archive all the active online redo logs

Similar Messages

Maybe you are looking for