Archiving EC_PCA_ITM object: Profit center

We are doing the archiving for the object EC_PCA_ITM (Profit ctr. accounting: actual and plan line items)
The system display an error message about a configuration in customizing:
"The are no versions in Customizing that match your selections"
In Customizing, no combination of controlling area, ledger, version, and year was found for your selection criteria.
My question is: Which are the consecuences of combinations update in customizing? We are going to update information? affect account balances?
Regards in advance for the help
Enzo

Hello Enzo,
It seems to be that you are receiving Error message GX214 "There are no versions in Customizing that match your selections", although versions are available.
Please ensure that you have implemented the latest version of the note 370299. You can check whether you are using the latest version of the archiving and deletion programs via t-code SE38 -> Utilities -> Versions -> Version Management. The latest version of this note will resolve most problems concerning archiving up to release 46C. Please check  very carefully this note.
In addition, please check the following in your system:
At least version 0 has to be maintained in trx. 0KEQ for profit center accounting otherwise no data would be transfered to PCA as actual postings are always transfered to PCA in version 0.
I hope it helps
Best Regards,
Vanessa Barth.

Similar Messages

  • New GL - Doc Splitting - Profit Center not hitting the Zero Balance GL

    Dear SAP New GL Gurus,
    I am trying to activate the doc splitting where the system uses a GL Account to ensure that Profit Center wise Trial Balances are tallied.
    I have done the following configuration till now, and I feel that these steps should ideally split the doc and post the PCA Adjustment Account Entry - I think its the Zero Balance Clearing account that the system should ideally be using.
    I am not sure what I am missing here - This is what is done till now:
    1. Activated Document Splitting - Used Standard Method 0000000012.
    2. Classified GL Accounts for Doc Splitting as per standard SAP categories.
    3. Classify Doc Types with assignments of Transaction and Variant. Done as per standard, no changes made.
    4. Defined Zero Balance Clearing Account.
    5. Define Document Splitting Characteristics for General Ledger Accounting - Made Profit Center field as Mandatory
    6. Define Document Splitting Characteristics for Controlling - Left it BLANK as Point No. 5 is done for GL Accounting.
    7. Define Post-Capitalization of Cash Discount to Assets - Ignored
    8. Edit Constants for Nonassigned Processes - Ignored
    Under Real-Time Integration of Controlling with Financial Accounting:
    1. Standard variant 0001 used.
    2. Assigned 0001 variant on the Co Code.
    3. Define Rules for Selecting CO Line Items - Ignored
    4. Define Account Determination for Real-Time Integration - Ignored
    Accouting Entry posted by me - Both lines are Balance Sheet items:
    DR     Bank GL     Profit Center X
    CR     Bank GL     Profit Center Y
    Please help me out here.
    I will assign full points.
    Many Thanks
    Bob

    Hi,
    Yes. Very much. you need to assign scenarios even if you are using leading ledger.
    In any enty there will be minimum two views, Entry view and Ledger View
    Ex.
    Entry view
    Account    Amt    A/c Assig objects - Profit Center
    Customer  400                                   
    Sale A/c  -400                                     2000
    Gl View
    Account                    Amt    A/c Assig objects - Profit Center
    Customer Recon A/c  400                                   
    Sale A/c                   -400                                     2000
    If you dont assign Profit center in the scenario to the leading ledger, in gl view you will not be able to see profit center against the sales line item
    Assign points if useful
    Regards
    Raghu Ram

  • Issue on profit center group and profit center group hierarchy

    hi experts
    I have a requirement where i have profit center,profit center group and profit center group hierarchy.
    profit center group and profit center group hierarchy are same?if they are same how to get them into BI.if they are not same how to get them into BI
    im using two datasources 2lis_11_vaitm and 2lis_12_vcitm,how to connect the profit center group and profit center group hierarchy with the datasources,My dataflow is on top of these datasources there are two write optimised dso and on top of those w-o dso there are std dso and on top of the std dso there is a infocube.on infocube there is multiprovider
    Thanks,
    sivaram

    Hi Sivaram,
    Profit Center would be an attribute of any object which is used in the 2lis datasources. maybe CO Order or WBS etc...from these objects Profit Center should be or could be made as navigational attribute.
    Further you can load the master data and hierarchy from the datasource 0PROFIT_CTR_0106_HIER
    Hope this helps.
    Good Luck.
    Vikram

  • Authorization at profit center level

    Dear All,
    In FI Module we have a requirement of Authorization at Profit Center
    Level.
    For Example : in FB50 transaction we want to allow some users to enter
    only for "1001" profit center.
    We have tried the following :
    We have create authorization object for PRCTR - Profit Center field and
    assing that object manualy to role. But it is not working. After assigning this authoization object, profit center also comes in "Organization Level". But at transaction level no effect.
    Thanks  in adanace,
    Nirav

    Hi Nirav,
    You will only invoke additional authorisation checks if the code for the transaction is changed to include the relevant AUTHORITY-CHECK code + subsequent logic.
    From memory for FB50 you will need to look into an appropriate user exit or enhancement point to code this additional check.  Alternatively you could use an alternative control such as random sampling for those users.

  • Customer dr, customer cr ...in f-43 with profit center error

    Hello,
    I am trying to post
    Customer Dr
    Customer CR
    but i cant see the field Profit Center in either of the line items. I have document splitting active.
    I have profit center field as optional in FSG for recon account, and positng key but it still doesnt work.
    what can be done to post the document.

    As you have said in your query that document split is active in your client. As per my understanding your split is active at Prifit center Level. If Yes, then you need to manually enter Profit center in one of the line items you are posting. System won't allow you post an entry if it is not able to derive the document split object (profit center) in your line items.
    Your entery is :
    Customer Dr.
    Customer CR.
    and you are using F-43 T code which is specific to Vendor Invoice. I think you shoud either use FB01 or FB05 (in case of post with clearing).
    Try manually entering the profit center and simulate the document. It should post. If you are using post with clearing (FB05) function then system should derive the profit center from the line item you want to clear.
    Hope this helps.

  • Profit Center Hierarchy: Authorization Error

    Hello,
    Right we are generating hierarchies for users on the object Profit center.  We want to have a separate data role that gives access to the authorization object ZPROFITCTR.  What should the values be for PROFIT_CTR and TCTAUTHH if we want to check what authorizations have already been generated for the user?  I am thinking there must be a way to do this rather than create a different data role for each user.
    I have done a lot of reading and have found if you specify the value ' ' for OTCTAUTHH as a value if only hierarchy authorizations are to be in effect.  I thought this would mean generated heirarchies would be checked and would give a user access to 0PROFITCTR, but that was not the case.
    Thanks,
    Brian

    try to re-transport PCA
    IMG; CO--> PCA --> tools --> transaport customizing set. -->
    but i believe if you transport only the "master data" Q will function fine. ( try OKEQ first)

  • Origin Object Type for Plant Maintenance Orders in Profit Center Accounting

    Hi,
    I want to make a selection for plant maintenance orders in transaction KE5Z, report for line items in Profit Center Accounting. When checking possible input options for the selection field <b></b>Origing Object Type<b></b> the system shows value 15 for Maintenance Orders. However I discovered in our system the maintenance orders are reported as Origing Object Type 03, which is Overhead Orders according to the selection list. So I cannot distinguish between overhead orders and maintenance orders in this report.
    What is the cause our maintenance orders are assigned to Origin Object Type 03 in stead of 15 and what is the customizing transaction to correct this ?

    Looks like, this is no longer supported. Refer to note 168004 and  102434.
    Cause and prerequisites
    These functions were not programmed to meet the above requirements.
    As of Release 4.0, the object type is transferred directly.
    Solution
    Once you have implemented the advance correction. the origin object type 'Overhead cost order' (03) is assigned irrespective of what is the SCOPE for orders.
    As a result of implementing this note or as of Release 4.6B, the order category distinguishes between overhead cost orders and production orders in the origin object type. In this case, the following origin object types result (as described above in 1.):
    Order category 04 to 10, 40 => 04 (production order)
    All other order categories => 03 (overhead cost order)
    The logic that the origin object type was set depending on the object class (as described above in 2.) is no longer supported. The object class can be evaluated separately in Reporting. -
    The corrections of this note refer in Release 4.0B to the corrections from Note 102434.

  • Authorization object for Profit Center in BW 3.5

    Hi,
          I have question regarding BW security. I want to restrict users access based on profit center ie i mean to ask is there any authorization object in BW, where i can specify Profit Center values and create role, where i can further assign this role ans restrict authorization to that particulat profit center.
        I already have authorization on profit center hierarchy which is old. Now we have new hierarchy, how can I use those authorization object, profiles, and roles to this new hierarchy. If there is quick work around please advise or can tell me how to create authorization object in BW, where i can specify Profit Center values and create role.
    Thanks in Advance
    Robert Courtney.
    Edited by: Robert Courtney on Apr 22, 2009 9:25 PM
    Hi,
        Some one can help to change my old hierarchy to new hierarchy in the authorization.
    Thanks
    Robert Courtney
    Edited by: Robert Courtney on Apr 22, 2009 10:07 PM

    Hi Robert,
    Check the link below, hope this will resolve ur issue.
    [Re: Authorization to new hierarchy node (Profit center) in 3.5 Transaction code]
    Regards,
    Praveen

  • Authorization object for Profit Center in BW

    Hi,
    I have question regarding BW security. I want to restrict users access based on profit center ie i mean to ask is there any authorization object in BW, where i can specify Profit Center values and create role, where i can further assign this role ans restrict authorization to that particulat profit center.
    Thanks in Advance
    Shiv

    Hi Siva
    The security concept in BW is a bit different from the R/3 security concept.
    In BW you need to create an authorization object in RSSM (or rsecadmin in NW2004 and forward), for these kind of organizational/Data driven authorization checks. In RSSM you'll need to link it to the Info Object for your profitcenter and to activate it for the relevant cubes.
    My guess is that your working with at profitcenter hierarchy - in this case you need to look at the authorization for hierarchies concept - this is maintained in RSSM as well - for documentation on this check this link:
    http://help.sap.com/saphelp_bw33/helpdata/en/8b/134c3b5710486be10000000a11402f/frameset.htm
    The actual roles can still created i PFCG.
    regards
    Morten Nielsen

  • Authorization object for company code and profit center together

    Hi all,
    Please help me with the following requirement..
    Company Code = ABCD
    Profit Center = *
    The user is authorized to run the report for company code ABCD only but any profit center within this company code.
    2       Company Code = *
    Profit Center = WXYZ
    The user is authorized to run the report for Profit Center WXYZ only but any company code.
    3       Company Code = *
    Profit Center = *
    The user is authorized to run the report for any company code and profit center.
    The same user could have 1 and 2. So, in this case he should be able to run a report for the total inventory of company code ABCD, and a report for total inventory of profit center WXYZ only regardless company code.
    He should not have visibility to other company codes inventory other then profit center WXYZ.
    Regards,
    Raj

    Hi ,
    Anyone please help me..
    Regards,
    Raj

  • How to change Profit Center

    Dear PS Gurus,
    Kindly help me out on this.
    My Query:-
    I am trying to create a PO using the T-code ME58. When i am selecting the PR and adopting it i get a message as "Profit Center was set to 9999". However i want to post the data to profit center 1300.To do so the system is asking me to to assign the PSG, cost center or other object to that profit center as well.
    Diagnosis by the System
    You entered profit center 1300 or transferred it from a previous transaction, such as material receipt from an external order. However, the system derived the profit center 9999 from the account assignments.
    Kindluy suggest as to where i should go and change the profit center so that i dont get the error message while creating the PO.
    Points will be rewarded.
    Regards,
    Gokul

    Dear NAG,
    As suggested i checked the Proift Center in t-code OKB9. I found the details as follows:
    CoCd - 1000 (IDES AG)
    Profit Center - 9000 (IDES Portugal)
    Cost Center - This field is blank
    Cost Element - 800000
    I checked the profit center in the material master also and found that the profit center 1300 is assigned, which is fine. Also i checked the profit center in my project. There too the same profit center has been assigned.
    I changed the profit center from 9000 to 1300 in t-code OKB9, and tried making the PO.But still i am getting the same error.I have checked the entire list of profit centers assigned to CoCd 1000 in t-code OKB9 but nowhere i could find the profit center 9999 assigned. I am confused as to from where the system i picking up this profit center (9999). When i checked the details of the profit center 9999 it was found that it is a Dummy profit center but i dont know where it is assigned and from where the system is picking this Profit center.
    Request you/anyone to knidly help me out in solving this issue. For your information i am trying this example in IDES.
    Please help me out.
    Thanks & BEst Regards,
    Gokul

  • Segment reporting, split by profit center; still need segment splitting?

    HI experts,
    With reference to the subject of this post, I would like to have better understanding on the followings:
    Settings (1) IMG > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers > Ledger > Assign Scenarios and Customer Fields to Ledgers ... I have settings of <Profit Center Update and Cost Center Update>
    VERSUS
    Settings (2) IMG > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting ... I have profit center to be split (updated)
    My concern, is I want to have segmental reporting.  In the SAP material, it says that segment derived from Profit Center.
    My Question:  With the above settings (1) and (2), do I still need to have additional settings for segment?  For example:
    Settings (2), do I need to set segment here?
    How about settings (1), any need to have <segment update>?
    In settings (2), help file says: "This determines what fields in a ledger are updated when it receives posting from other application components."  Not quite sure what this statement mean.
    Thanks and regards,
    sbmel

    Hello,
    The actual need of scenarios to be added in every ledger is the need for these objects to be updated in new tables like FAGLFLEXT. If you do not add scenarios then information of cost center, profit center , segment will not be updated in New GL Tables.
    Hence it is mandatory to pass entire information related to Cost Centers, Profit Centers and Segment by adding relevant scenarios to all the ledgers activated.
    Secondly, segment is such a field that can not only be derived from profit center but also through a BADI using a logic written using ABAP code.
    Regards,
    Sam

  • Update Profit Center Field in CO Line item tables

    Hi,
    We are working on ECC6.0 NewGL with Real-time CO-FI integration for Cross Company Code and Cross Pofit Center.
    For those CO internal documents (like activity confirmation at production order) where there is no cross company code or cross profit center postings, no FI document is generated and hence table FAGLFLEXA is not updated. So, we wanted to take data from CO table COEP / COVP for these internal CO documents. However, there is no Profit Center field in CO line item tables COEP / COVP. We don't want to refer to Object Number (OBJNR) of COEP / COVP tables and take profit center from master table of cost centers, IOs etc..,as Profit center in the cost center, IO masters may get changed latter.
    I tried to generate a new report through report painter from structure CCSS, but Profit center is not defined as Charactericts there. Hence of no use.
    Can we append Profit Center field in CO line item tables COEP / COVP and update tatabase at the time of posting? Is there any risk?
    Please suggest any other alternative...
    Thanks,
    Bijay

    Hi,
    As per the standard process we can't derive PC from CO-internal Object...as per my knowledge.
    Better you can derive from IO-CC master PC ....if your question that it will change frequently then -no control can make.
    Regd,
    Kha

  • Profit center is missing in profit center report  , i'm forgot set 1KEF

    Dear Expert,
    I created a transaction , but the profit center document is not created automatically / missing. because I'm forgot to maintain Set Control Parameters for Actual Posting in 1KEF.
    Please help..  How to posting historical data profit center accounting before i set in 1KEF?
    Thanks
    Prabowo

    Hi Werner,
    thanks for your advice.
    but, i can't run tcode 1KE8, SAP give this massage.
    "No relevant document lines exists
    Message no. KM830
    Diagnosis
    This document is not posted to Profit Center Accounting.
    There are no relevant lines in the document. Possible reasons for thisare:
    Document contains only balance sheet accounts
    Document contains only pure profit/loss accounts with no assignment to a profit center
    Elimination of internal business (the posted objects have the same profit center)
    Procedure
    Check whether you are processing the right document"
    Please Help,
    BR
    Prabowo

  • Profit center error on VF44(rev reog) & MIGO

    HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
    Contract Scenario,
    I am Creating   Contract  In CRM    and replicating it as a contract  in ECC to performe Billing(VF01) and Revenue recog(Vf44) the contract created is replicating  to ECC  with  Internal order as a  real   account assignment  object on the contract , when we are billing / revenue recog  the dummy profit center  is getting  populated inthe accounting entries  , the senario is explained  as below
    I have replicated contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real  internal order(IO1),as i am using single object controlling  and controlling senario at the transaction level)  to all the line items ,when ever  the line item is Billed(Vf01) or the Revenue recognized  on the Contract(Vf44) the Accounting Entries are getting  populated with  Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
    I there a way we change the profit center on the accounting document on billing and revenue recognition
    Goods receipt:
    I am Creating   Contract  In CRM    and line item  in the contract which is backlined  with the princial will generate a  PR in ECC with Account assignment cat "F"  When ever a  Po with u201CFu201D account assignment   is created  and GR is done on the Same , Dummy  profit center is  getting  populated  in the Accounting  entries
    I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to  the line item
    We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
    I require your help very badly , Please guide me .
    Thanks

    Hi Rajesh,
    Do you know how you solved it and can you please share it. I am also looking for a similar solution.
    Thanks
    Prasad

Maybe you are looking for