Archlinux setup on Toshiba r100
Hi guys,
I have a problem, i would install arch on a toshiba r100 (subnotebook) but i have no cd rom on this laptop so i would use a usb pendrive to install it.
The problem is that i couldn't create a bootable image on my usb pendrive, i tried with some tutorial in the wiki but when i reboot my pc with usb as first boot option i obtain a phrase like "Missing Operating system" and the system freeze.
Please help me.
Did you read this wiki article? http://wiki.archlinux.org/index.php/Usb … ch_Install
Make sure you read the notes at the bottom, they could be important. If you have problems, make sure to write down the exact error message, it will help us help you.
Similar Messages
-
Trouble with Toshiba built-in webcam: "unable to enumerate USB device"
I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature -
Portege R100: Solution how to restore the unit without using a CD-ROM drive
I have just re-stored my Toshiba R100 after nearly 3 years of owning it without a single format due to the complexities of getting a working bootable CD-ROM drive.
This won't help those of you who have a non booting laptop but if yours is booting I used the following method to re-store my laptop with zero problems.
1. Put the restore CDs into another computer and extract the Ghost image files "01131000.GHO" and "01131000.CRC" from disk 1 and "01131001.GHS" from disk 2.
2. If your laptop has a second partition then transfer these files to a directory on your non windows partition. If not you will have to use partition magic to create one.
3. Create a Norton Ghost boot disk from a retail version of Norton ghost and a Windows 98 Boot disk.
4. Boot the Laptop from the Windows 98 Floppy disk, then swap disks and run Ghost.
5. Select Local>Local Disk>From Image
And select the 01131000.GHO file.
6. Select the only image offered to you, then select the R100?s drive, and finally select the main boot partition.
7. Hit go!
8. Re-boot and follow the windows configuration and you're done.Hi George.
Thanks for your useful description.
I'm sure it will help other users here in our community. -
Why won't these files run on my Archlinux?
I wasn't really sure which category to post this in.
Anyway I'm trying to run the files in the bin/ directory of the archive I've uploaded here:
http://www.filedropper.com/jaglinuxtools
On Archlinux all I get is:
bash: ./aln: cannot execute binary file
and so on for the other three files.
I can boot up a live CD of another Linux distribution (kubuntu in this case), mount my Linux partition, and run the files from the same directory, and they all behave as they're supposed to.
What's the deal here? I'm sure my permissions are set up correctly in Archlinux. I've chmodded the files with an a+x on my machine and I even setuid/setgid on the suggestion of someone from the Atari Jaguar forums. That archive has the original files with unmodified permissions, by the way.
Anyone have any clue why this isn't working on my Archlinux? Does it work on any of your Archlinux setups either?Actually come to think of it, back when I was running i686 the files did work the first time I used them, but I did a pacman -Syu shortly afterward and after that they started giving this error about not being able to execute them. It would make sense if the official Archlinux kernel options were changed to exclude this type of binary between my upgrades at that time.
-
Portege R100 strange error code
Hello,
I closed my toshiba r100 and it does not want to boot up any more. When i turn it on, screen is blank, fan is turning with full speed, and the mains led flashes (on for 1 sec, off for 1 sec)... this code does not exists in the service manual which i managed to download... any suggestions?
is the hard reset just holding the power button for say a minute without the battery and mains?
Thanks for help!
woojui managed to find this:
Blinks orange
Cycle of 2 seconds
"ON" 1 second, "OFF" 1 second
means: BIOS is damaged
Any ideas how to fix it?
I tried to clear the CMOS by taking the batter out for about an hour. -
Network key for wifi, not password
I am trying to set up a new iphone on my verizon account. I backed up the old iphone on the icloud first. Now I can't activate the new one without a wifi connection, but it won't give me the option to use a network key instead of a password to connect to my home wifi. We don't have a password, we have a network key, and if I try to input the network key like with all my other devices into the password bar, it doesn't work.
How do I input a network key?Hello
For Vista installation use please this installations order. It is very important to install all stuff following installations order. Maybe some of listed stuff will not be available on download page but installing all available drivers, tools and utilities your Vista should work well.
One more thing: According notebook specification your notebook should have Intel 11a/b/g (13ch) - Golan WLAN card inside.
Windows Vista SP1 RTM
Intel(R) Chipset Module
Intel(R) Robson(Intel iMSM Driver)
Intel Video Driver (GM45+ICH9-M)
OR
AMD Video Driver (M82XT/M86)
Conexant CX20561 Audio Driver
Marvell 8040/8072 LAN Driver
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem Driver
O2 OZ129 Card Reader
Modem Region Select Utility
Intel Wireless LAN Driver (Echo Peak)
Intel Proset Utility (Echo Peak)
Atheros Wireless LAN Driver
Realtek 802.11b/g Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Driver
TOSHIBA ConfigFree
TOSHIBA WPS Library
TOSHIBA Assist
TOSHIBA Speech System
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer
TOSHBA Face Recognition
TOSHIBA TRS Driver
HDMI Control Manager
TOSHIBA Disc Creator
TOSHIBA Recovery Disc Creator
TOSHIBA Recovery Disc Creator Launcher
Good luck and if you have more questions please post again. -
Samba timeout when trying to connect to a computer in a workgroup
Hello, seems like the best section to post this in...
Right after I installed my Archlinux setup, I spent a bunch of time trying to get samba running perfectly, mainly, it was just so that other (window$) computers could access mine. Upon getting it working perfectly, both ways, I didn't use it for a while (which is typically the case).
So today, I need to transfer lots and lots of data, but via Dolphin, browsing the workgroup (which I clicked), lists all the computers that are there, including my own (this).
That's good so far, but after I browse to one of those computers (even my own!!), shortly thereafter, I receive a timeout error.
I have tried restarting the samba daemon, netfs, I also tried stopping network manager, and starting the network daemon myself, hoping it was network manager's brokenness that was the problem. Nope.
Still left in this situation...and nothing that I can remember, has changed since the last time, I didn't screw with config files or anything. Although, I do think I changed routers between this time, I also remember seeing some updates for samba-related packages.
All out of ideas, I posted here.
I can post my smb.conf file..or anything else for that matter, if you want. I just want this problem to be solved, and currently am forced to boot into window$ to transfer lots of data. Naturally, I can't do anything during this time, when not in linux....and it kills me a little bit more each time I have to see it
EDIT: Also note that, I tried using the default config, but I still get timeouts(and restarting samba daemon of course). With 'smbtree', it lists all of the shares available on the workgroup also. I also use the gamin program, as opposed to FAM. Originally, I followed the wiki, and that was how I get it working in the first place, but no longer does it work correctly. The logs in /var/log/samba/ do not show anything interesting, and in fact, only show about 1-2 lines, just saying that it started..
I also had it say about a firewall possibly being in use, but on a reload/retry, it returns to a timeout error. I do not have any firewalls that I am aware of, on.
Update: Well I figured out if I run the following command: smbclient '\\NAS\Data' that I will then be taken to a prompt where I can do ls, cd, etc, and browse that share perfectly. What's going on here? Dolphin still times out on it and I would prefer to use a GUI for this..
Last edited by sreich (2009-06-26 17:00:14)Well I decided to try to use 'smb4k', which I just recently found, it also sees all of the computers on my network, but it also sees their shares after I browse into it. Unfortunately, it fails to mount any of them...
"mount error: could not resolve address for NAS: Name or service not known
No ip address specified and hostname not found"
That is the message I receive after clicking (mounting) on one of the shares of the 'NAS' computer, the one on my network.
Perhaps this error will make things a bit more clear?
I've been even looking at the docs at samba.org, trying to debug this issue...
UPDATE: Seem to have limited the problem down, at least now I can mount a share on a computer but *only* if I specify the IP address manually.
So it appears that it cannot resolve the name of said computer/share, to an IP... what could be causing this, and how can I fix it?
Last edited by sreich (2009-06-26 19:17:12) -
Qosmio G30 freezes upon Norton Internet Security 2008 startup
Norton Internet Security 2008 will freeze my computer as soon it tries to load and the only way to go on is to restart the system by pressing the on/off-button.
My notebook is a Toshiba Qosmio G30-177 (Model No. PQG32E-02G022GR) with Vista Ultimate and NIS2007 pre-installed. I have no problems with this NIS2008 version on my other notebook (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
NIS2007 runs fine on my G30 and I do not have any problems at all, but newer versions of NIS seem to get in conflict with my system:
1. I am able to install and run the new version, download all updates and adjust the settings. Maybe one or two days later my computer will freeze after start exactly when the tray icon of NIS appears. For a couple of seconds there is just no response of the system at all and the LED's of my notebook show that all HD activity has stopped. After being idle for these couple of seconds, the cooling fan will start to operate at maximum power, creating a tremendous noise I never experienced before, not even while the CPU was running at 100% for some time due to other programs. Forcing a restart is all I can do.
2. Now this time, I successfully restarted my notebook again (took some attempts) and it suddenly did not freeze. Then I disabled firewall and auto-protect permanently, so there was no freezing upon startup and I just had to manually activate both firewall and auto-protect after start. In order to prevent freezing again after reboot, I always disabled NIS before shutdown. For the next one or two days this workaround was quite successful.
3. All of a sudden, after one or two days, this workaround is going to become useless, because the system starts to freeze again at the very moment the tray icon appears. In this case, restarting has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent NIS form starting by no longer allowing ccApp.exe to automatically run upon start (administrative tools > system configuration > "startup" tab). This is successful and my notebook is able to start normally, but if I later try to start NIS manually, it will freeze again.
I had this problem since NIS2008 was just released, so I thought that meanwhile a Windows or Norton update might have fixed the issue, but this weekend I gave NIS2008 another try without success. I am almost sure that the problem is not caused by any other software than Windows and/or Norton, because I also tried to install NIS after a full system recovery, thus having only pre-installed NIS2007 and Vista on my notebook. I did use the Norton removal tool and followed the deinstall instructions before trying to install the newer version of course.
My last hope was that the NIS2009beta version somehow would not freeze my system, but it does. It does not matter if I try to run 2008 or 2009beta version, the problem is exactly the same.
What really drives me almost crazy is the fact that NIS runs perfectly for some time, then needs a rather small workaround, and then after some time totally refuses to work. In these couple of days I did not change any system settings, install or deinstall any programs or did anything that I felt could conflict with NIS...
So far, I have no idea of a solution and have to use NIS2007 again.
Does anybody know how to solve this problem?Hi !
I use NIS since 2001 and never had any serious trouble with this software.
There could be some compatibility problem, but I don't think that Vista is causing it, because otherwise a lot more people should have the same problem. Even the installation of all current Windows, NIS and Qosmio updates did not solve it. Of course I tried to get help using Symantec's Support and their user forums, but without success. This problem seems to be a rare one (unfortunately for me). I tested the NIS2009beta and even though it's a new version, the PC freezes again when this program starts. And this made me think that maybe a service or setup by Toshiba causes the problem and other Vista users are not affected. It's a strange thing that the pre-installed NIS2007 version is running fine...
Cheers,
Mario -
Where are the Vista drivers for Qosmio X300
I have bought a qosmio x300 with q9000 quadcore and SLI 9800m gts
A nice notebook.
i have install on this notebook vista ultimate ( the notebook is sell with vista premium).
but, i don't have the drivers ...
ok, i search on toshiba web : usa, taiwan, australian, canada, french, europe, etc...
but i search all the drivers : toshiba hardware setup : all the version that we can find on toshiba web's site are wrong...
and a lot of drivers are same.....
so where can i find the drivers for my notebook ??There are no good or bad drivers. Maybe you do something wrong.
The fact is that all drivers listed on Toshiba support page are absolutely the same as in recovery image. So there is no difference and all of them can be used on every Vista version.
By drivers, tools and utilities installation is important installations order. So please install and configure Vista following this installations order:
Windows Vista
Intel(R) Chipset Module
Intel(R) Turbo Memory Driver(Intel iMSM Driver)
nVidia Display Driver
Realtek Audio Driver
Realtek Network Driver
Alps Touch Pad Driver
Synaptics Touch Pad Driver
Jmicron CardBus Controler
TOSHIBA Software Modem
Modem Driver
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
Flash Cards Support Utility
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA Assist
TOSHIBA Speech System
Dolby Control Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer
TOSHIBA TRS Driver
HDMI Control Manager
TOSHBA Face Recognition (SmartFaceV)
I hope this list will help you. -
Satellite U400: Need Vista install order and Control buttons don't work
I bought an Satellite U400-11T model with french windows Vista.
I want to change the french Vista to hungarian Vista.
Of course I bought a legal vista HUN and downloaded the drivers etc.
I am interrested in about the install order called installation instruction like at the XP models.
My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
Where can I switch on it or wich program must i reinstall?
Thanks
SchmidHi
The installations order for Satellite U400 should be as follow:
Windows Vista SP1
Intel(R) Chipset Module
Intel(R) Robson(Intel iMSM Driver)
Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
Conexant CX20561 Audio Driver
Marvell 8040/8055 LAN Driver
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem Driver
Netwaiting
Modem Region Select Utility
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver V7.1.62.2012
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA WPS Library
TOSHIBA Assist
TOSHIBA Speech System
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer V2.02.00
Toshiba HDD Protection
TOSHIBA Face Recognition
TOSHIBA TRS Driver
Broadcom
HDMI Control Manager
Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
Bye -
Instantiating a form as different views and merging them at the end of the workflow.
Hi,
I have a big doubt in implementing one of the crucial part of our workflow design.It goes like this.
1.we have a form which is mainly classified into five types and a total of 16 subforms.
2.the five types in which the form is divided is based on the approver and the type. of requests.
3.different views of the whole same form have to be sent to the five approvers.
4.once the approvers approve the request,a wait point must be present in the workflow,where it will wait for all the views of the form (which are approved) and must merge them into one single pdf form ie., the original form.
so the change in the views of the total form must be reflected in the main form at the end while it is merging.
also all the views of the form are to be merged in to one for the sake of arhiving and rendering it to pdf.
so my questions are..
1.How to add multiple views of the main form (xdp) in the workflow separately as individual xdp templates(based on the five types i mentioned)?
2.How to merge the form views again in to single form or how to make the changes reflect in the main from when changes are made in their views.?
thank u..
Raghava Kumar V.S.S.MOBILE PHONE (BIRMINGHAM) LIMITED
BUY UNLOCKED BRAND NEW MOBILE PHONES AND LAPTOP,DIGITAL CAMERA,GAMES,PLASMA TV.They are brand new and sealed in an original company box with complete accessories and one year international warrantee.
NOTE : Minimum Order : 3 unit and get 1 free
Sample Order...1unit to 5units
Bulk Minimum Order : 10unit and get Extra 3unit
Shipping fees : free Shipping : FedEx, DHL or UPS
Delivery Time : 38hrs/48hrs.
MOBILE PHONE (BIRMINGHAM) LIMITED
Address: 376 COVENTRY ROAD, SMALL HEATH, BIRMINGHAM, WEST
MIDLANDS, B10 0XE
+447024036361
Contact Person :Thomas larry
Sales Manager
DO CONTACT US [email protected]
DO CONTACT US [email protected]
DO CONTACT US [email protected]
Nokia Phone.
Nokia N95..$2800USD
Nokia N93..$250USD
Nokia N92.$200USD
Nokia N97...$280USD
Nokia N96...$280USD
Nokia N83.$175USD
Nokia N91.$180USD
Nokia N90.$170USD
Nokia N70.$150USD
Nokia N71.$155USD
Nokia N72..$160USD
Nokia N73..$165USD
Nokia E90 COMMUNICATOR..$300USD
Nokia 7360.$165USD
Nokia 7380..$175USD
Nokia 8800 sirrocco...$200usd
Nokia 7370..$170USD
Nokia 8800$140USD
Nokia 8801.$145usd
Nokia N80.$160USD
Nokia 7710.$145USD
Nokia 7610.$120usd
Nokia 9300$145USD
Nokia 9500$170USD
NOKIA 6230 for........$130usd
NOKIA 6230i for.......$140usd
NOKIA 6260 For........$130usd
NOKIA 9300 For........$130usd
NOKIA 9500 For........$140usd
NOKIA 7610 For........$150usd
NOKIA 6680 For........$130usd
NOKIA 6682 For........$140usd
NOKIA 7650 For........$150usd
NOKIA E60 for.........$150usd
NOKIA E61 for.........$155usd
NOKIA E70 for.........$160usd
Motorola Phone
Mitac MIO 8930$280usd
Motorola razor v3$130usd
Motorola razor v3 pink edition..$130usd
Motorola v3X..$140usd
Motorola MPX300.,$150usd
Motorola V3i..$150usd
Motorola L7$140USD
plasma sony 32?'.$400usd
MOTOROLA SLVR V8 For........$150usd
MOTOROLA A1000 For...........$160usd
MOTOROLA A1010 For...........$200usd
MOTOROLA MPX 220 For........ $120usd
MOTOROLA MPX 300 For........ $140usd
Sony Ericsson w950i.........$170usd
Sony Ericsson w900i.$140usd
Sony Ericsson W800i.$135usd
sony Ericsson w700..$130usd
sony Ericsson w600i.$125usd
sony Ericsson w300..$120usd
sony Ericsson w950..$200usd
Sony Ericsson p990i.$145usd
Sony Ericsson m600i.$175usd
sony Ericsson m600..$170usd
Sony Ericsson p990..$140usd
Sony Ericsson p910i.$125usd
SONY ERICSSON K700i For......$130usd
SONY ERICSSON k750i For......$140usd
Sony Ericsson W810i For......$155usd
Sony Ericsson S700i For......$140usd
Sony Ericsson: Z1010 For.....$160usd
SAMSUNG D600 For......$120usd
SAMSUNG D720 For......$130usd
SAMSUNG D730 For......$135usd
SAMSUNG D800 FOR......$135usd
SAMSUNG D820 For......$140usd
SAMSUNG Z500 For......$150usd
Apple iphones.................$200usd
Apple ipods 80 GB............$180usd
Apple ipods 60 GB............ $150usd
PlayStation 3 20 GB.............$220USD
Playstation 60 GB..................$250usd.
i-mate jas ja and other.
Treo 650 for. $150usd
Treo 700 for. $180usd
Sick kick for $140usd
Side kick 2 for..$130usd
Side kick 3 for..$150usd
Eten m 500 for.. $100usd
Dvx-pod for.. $50usd
i-mate jas jar for. $160usd
i-mate jam for.. $170usd
i-mate k jam for.$180usd
Eten m 500 for.. $150usd
Treo 650$130usd
Treo 600$120usd
Treo 700w..$140usd
Pioneer CDJ-1000MK3 ------------$900.00
Pioneer DJ Effector - Red-----------$350.00
Pioneer System Case (CA-CMX5).......$450.00
Pioneer CDJ-800MK2 Digital Vinyl Turntable=--$520.00
Pioneer Dual Rackmount CD Player--------$600.00
Pioneer Pro DJ Mixer -------------$720.00
Pioneer Rack mount pro DJ mixer---------$780.00
Pioneer 96Khz / 24 bit digital mixer.-----$1,000.00
Pioneer Flat Speakers (ea.)-------------$1,100.00
Pioneer Professional DVD Turntable-------$2,000.00
Pioneer Pro DJ 96Khz 24bit Mixer---------$2,200.00
Pioneer Professional DVD Turntable------$2,220.00
Pioneer Djm-800 4 Channel Dj Mixer W/midi---$1,000.00
Pioneer DJM-400 Professional DJ Mixer------$300.50
Pioneer Pro DJ DJM1000 Pioneer Top of the Line
D---$2,100.95
Pioneer DJM-1000 Professional Club DJ
Mixer----$2,110.00
Pioneer Super DJ mixer - Pioneer DJM909------$900.00
Pioneer DJM-600-------------------------------$750.00
Pioneer CDJ 800 MK II / DJM 600 CD DJ
Package----$2,100.00
Pioneer DJM-1000 Mixer--------------$2,200.00
Pioneer Model: DJM-600K--------------$800.00
Blackberry
Brand new BlackBerry 8700r....$200
Brand new Blackberry 8700c....$200
Brand new Blackberry 8700g....$210
Apple Iphone.....................for Just $400
APPLE LAPTOPS.
Apple NoteBook Laptop for just $550
Apple Mac Book...for just $450
Apple Mac Pro .....for just $500
Apple Laptop 17inch for just....$400
APPLE IBOOK 12" 1.33GHZ...............$350
APPLE IBOOK 14" 1.42GHZ.....................$380
APPLE IBOOK G4 1.33GHZ..................$370
APPLE IBOOK G4 1.42GHZ....................$400
APPLE G4 POWERBOOK 1.5GHZ SUPERDRIVE WITH 15
INCHDISPLAY........$580
APPLE G5 POWERMAC 2.0GHZ DESKTOP
COMPUTER...................$620
APPLE G4 POWERBOOK 1.5GHZ SUPERDRIVE WITH 17 INCH
DISPLAY........$550
All Toshiba laptops
Toshiba Satellite PRO L10.. $320
Toshiba M200 $500
Toshiba R100 $450
Toshiba Qosmio E10 $750
Toshiba Satellite PRO L20.. $250
Toshiba M100 $680
Toshiba M300 $740
Toshiba Portege A200. $320
Toshiba Satellite L10 $330
Toshiba Qosmio F20 $500
*Dell Laptops
Dell Latitude D600 $290
Dell Latitude D500t.. $200
Dell Inspiron 6000 $350
Dell Latitude D505 $340
Dell Latitude D610 $460
Dell Latitude D510 $320
Dell Inspiron 9300 $530
Del Xps M2010..............................$400
Del Xps M1710..................................$350
Sony Laptops
Sony VAIO VGN-T1 $680
Sony VAIO VGN-FS315 $420
Sony VAIO VGN-S3 $450
Sony VAIO VGN-TX1.. $840
Sony VAIO VGN-FS215 $310
Sony VAIO VGN-S4 $470
Sony VAIO PCG-K35.. $550
Sony KDE-61XBR950 Television..3000usd
Sony KDE-42XBR950 Television..1000usd
Sony KDE-42XBR950 Television.1000usd
Sony PFM-42X1/S Television.500usd
Sony KDE-42XS955 Television..550usd
Sony FWD-50PX1/S Television1200usd
Sony KLV-32M1
Television400usd
SAMSUNG PLASMA TV
SAMSUNG HPP3761 Plasma TV $610
Samsung PPM42M5S Plasma Display $505
Samsung SPP4251 Plasma TV $700
Samsung PPM42M5H Plasma Display $550
Samsung HPR4252 Plasma $680
Samsung HPR4262 Plasma TV $450
Samsung HPR4272 Plasma $560
Samsung PPM50M5H Plasma Display $870
Samsung HPR5052 Plasma $670
Samsung HPR5072 Plasma $780
Samsung HPP5581 Plasma TV $780
Samsung PPM63H3Q Plasma Display $700
Samsung HPR6372 Plasma $820
PANASONICS TELEVISIONS
Panasonic TH-42PD50U Television600usd
Panasonic TH-42PX50U Television..1000usd
Panasonic TH-50PX50U Television..1500usd
Panasonic TH-42PWD6UY Television.500usd
Panasonic TH-42PD25U/P Television400usd
Panasonic TH-42PHD8UK Television450usd
Panasonic TH-65PHD7UY Television..2500usd
Pioneer PDP-5050HD Television.1000usd
Panasonic TH-37PX50U Television.500usd
Panasonic TH-42PX500U Television800usd
HITACHI PLASMA TV
Hitachi CMP4211u Plasma $850
Hitachi CMP4212u Plasma $350
Hitachi 42HDF52 Plasma HDTV $400
Hitachi 42HDT52 Plasma TV $440
Hitachi 55HDS52 Plasma HDTV $480
Hitachi 55HDT52 Plasma TV $650
Hitachi CMP-55HDM71 Plasma $420
AOC ENVISION PLASMA TV
AOC Envision A42W64 Plasma $400
MAXENT PLASMA TV
Maxent MX-42VM7 Plasma EDTV $370
Maxent MX-50X2 Plasma $300
NEC PLASMA TV
NEC 42VP5 Plasma TV $400
NEC 42VM5HA Plasma TV $470
NEC 42VR5HA Plasma -
The saga goes like this... (grab a hot, foamy latte, sit back and read -- go ahead -- take a couple of minutes to live my rollercoaster of emotions)...
I've got a dead PC laptop graveyard brewing in my living room corner. The latest addition is a cool little Toshiba R100. Two pounds light, it's been a great little workhorse: 256mb of RAM, 20gb HD, running XP Pro. But the screen has started to dima little after 2 1/2 years... my little baby is tired. I decided to go ahead and put the DNR sign on her, and relegate her to the graveyard.
SO then came my dilemma. I'm primarily Mac in my own little world, but as a consultant I am often forced to work within the PC world. And then came along the MacBook Pro with the Intel chip... eyebrows raised, and then Apple releases Boot Camp.
I barely dodged the Army recruiters in high school cause I was afraid of Boot Camp -- but now, at 41, I regret being afraid of what Boot Camp really offered: discipline, diligence, motivation, and a strong desire to achieve.
Now, Apple was allowing me to re-join Boot Camp at my advanced age.
I sauntered into the Apple Store this weekend, convinced I was ready to sign on the dotted line... the Mastercard dotted line that is.
I had done my research... the shiny new Toshiba Tablet Laptop with all the whizbangs was $1999.00 at Best Buy. A MacBook Pro outfitted to run both OSX and XP would cost close to $4000.00 out the store:
MacBook Pro with 2gb RAM, 100gb HD, 2.16 Intel Duo Core $3000.00 + the freshly minted copy of XPSP2 I'd need would set me back $300.00. Then you add the AppleCare and extra power adapter, tax, and you're close to 4grand.
I weighed the difference: 2 separate laptops to keep track of, or the promise of an ALL IN ONE! Simply dual-boot, and all your problems are solved. One computer, will travel!
My wife had to be put out of the picture, so I scurried her off to the Giants game. No way she would be a part of this, and she opposed it from the start. It's countless the bedroom arguments that Steve Jobs has caused... does he even imagine?
So in the store, the Apple Dude is well-informed. He did tell me, however, that if I wanted to see Boot Camp in operation, I'd have to go to Circuit City -- since the Apple Stores expressly forbid BETA software on their demo machines, and, of course, Apple will not even consider having a machine with XP running in the store. He also stated that since it was Beta software, they wouldn't support it -- basically, the machines CAN DO IT, but I'm on my own...
He promised to quickly upgrade the in the store machine to 2gb of RAM if I purchase there, however, he said I could order it online custom if I wanted.
He also said to forget about the built-in iSight, bluetooth mouse and keyboard, and possibly some other little gadgets running under Windows.
So I bought it... holding my breath at the cashier stand... hoping the credit card would authorize... he also convinced me to get the free iPod Nano and Printer, since I convinced HIM to give me the educational discount... I was currently in an online wine-tasting class.. he bought it, and quickly took about $700 off the total!
So I get the little silver sucker home, and fire her up. I made the mistake of transferring my G4 stuff over first. That was 50gb and 3 hours later before I could get to Boot Camp.
When I got to Boot Camp, it all started out real nifty. I was sure to PRINT OUT the Install PDF (I highly encourage this), and away I went. The download was painless, and I didn't need a firmware upgrade. The first message came to me quickly however... Boot Camp told me it couldn't partition the drive. I had chosen 30GB for Windows. BC said the disc needed repair. So I had to boot from the OSX install CD, and run Disk Utility. Disk Utility repaired something, and BC then did the partition! Woo-hoo. I wiped the sweat from mt forebrow - I had a successful partition.
Next came the install of Windows. I inserted the XPSP2 Cd, and away we went. About 50% through the install came the blue screen of death. Something about an installation cab being corrupt. I panicked cause the EJECT button didn't work (Windows wasn't installed... nothing to recognize the CD)... so I restarted the installation again. Same blue screen of death.
By this time, my wife was home from the Giants game, and I was hunkered over my little silver monster, in the dark, oblivious to it now being Saturday NIGHT!
She looked at me in disgust, and muttered something about it's either me or Apple as she stormed out...
I continued with my panic about.. how do I get the CD out to return to the world of OSX, cause on every restart the machine tried to boot teh XPSP2 CD. I referred to the BC PDF printout, and it told me to hold down the mouse button to eject the CD. Cool.
So I restarted, and forgot to hold down the mouse button ... BUT ... I didn't get the blue screen of death. I had jostled the computer a bit, so maybe that caused the CD to spind differently, and it continued.
So after about 45 minutes, Windows was installed. I rand the BC Mac drivers Disk, and Windows froze. Had to restart.
Did that a couple of times, and it seemed to take finally.
I'm in Windows now, have done some updates... get a lot of fatal driver errors, and MSN 7.5 causes a major blue screen of death.
I am typing this with the Apple Bluetooth Keyboard and using the Apple Bluetooth mouse... although the mouse sometimes tracks funny.
I've installed all the Adobe software, Macromedia software, Firefox, and some other stuff without too many issues.
Photoshop CS2 is BLAZING fast.
The wireless is great, picked right up, the networking works fine... I'm using the DVI out to a 23" Apple Cinema Display, and it's working fine, except every now and then the screen freezes for a milisecond. I think this screen is causing the persistent driver errors.
I'm not sorry I did it, I think it's absolutely cool to have 2 OS's on one MAC!!
It wasn't a SMOOTH install, but with a little luck I was able to weave my way through.
I'm 4 days in, we'll see how it goes...
--Brandon
<brHave you held the Option key at startup to get the OSX option?
One in OSX you can set the startup disk in System Preferences > Startup Disk -
Cannot install WXP on my Qosmio F50-113
Hi to all
(I cant speak good English)
My problem is if I want to install win xp on my Qosmio F50-113 I get a blue screen.
I have tried to integrate the drivers (the SATA drivers) but it could not helped me.
Can anybody help me? Please (jayjay?! schreib mich an [email protected])so.. how to install win xp on a Toshiba Qosmio F50-113
U need a USB stick! , Windows XP CD and nlite!
1.) Format ur USB Stick
2.) Copy Win XP cd on to ur USB Stick
3.) Download NLite and install it
4.) Open Nlite and add the sata drivers (select ur usb stick and add there)
5.) Create a Boot.ini file on the root of ur usb stick and put in that:
[Boot Loader]
Timeout=10
Default=multi(0)disk(0)rdisk(1)partition(1)\WINDOW S
[Operating Systems]
D:\Windows\ ="Start Windows"
C:\winxp\Setup.exe ="Install Windoof"
save the boot.ini file.
now.. restart ur pc and boot from usb stick
and select install win xp
install win xp
after the restart, boot from the USb stick and select start Windows
Windows will finish the installation and u can use Windows XP
i have installed windows xp now
and i have found a lot of drivers but not all i need the:
Toshiba Quad core hd processor xp driver
hardware setup xp
Toshiba Graphical library driver fpr xp
Toshiba Value added Package to usb my fn buttons
and the toshiba video indexing database
here are some pictures:
http://www.imgwelt.de/show.php?code=Z98C21G9AG9
http://www.imgwelt.de/show.php?code=1M85ZQ28F16
http://www.imgwelt.de/show.php?code=S300VOY56X9
http://www.imgwelt.de/show.php?code=KQM5OS9CX1N
and here is my modded webcam :D
http://www.imgwelt.de/show.php?code=1PO1QX44N09 -
How to recover only the C drive on a Satellite P200-1FJ
Hi, I have a Satellite P200-1FJ and I want to recover Vista but only on my first partition.
My HDD is divided in 3 partitions and I don't want to loose data. How can I recover only the C partition using the Product Recovery CD that came with my laptop ?Hi,
There's a specific order in which the downloads will need to be installed. When the flash cards are installed they interact with the Toshiba Product Information tool that is present on the machine; should this not be installed then it will return an error as it thinks the machine is not a Toshiba.
The downloads you need to install (in order) are:
TOSHIBA Value Added Package
TOSHIBA Flash Cards Support Utility
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
TOSHIBA ConfigFree
TOSHIBA Assist
What I would recommend is removing whatever Toshiba software you have installed first and then try it in that order and see what happens :)
Let me know how you get on,
Regards,
Nukey -
Installing Windows 7 64 bit on a Satellite P500
I bought the above mentioned system back in August last year with 32 bit Windows 7 installed. I understand that it's not possible to upgrade and that a complete new installation is required. Is it necessary to format the hard drive first? Have backed up all my data (there wasn't a lot) but am wondering if there's anything else I need to know before proceeding. Any help would be very much appreciated.
Here is installation list:
Windows 7
Intel Chipset SW
Intel Management Engine Interface
Display Driver
Intel Turbo Boost Technology Driver
Intel Rapid Storage Technology Driver
TOSHIBA Supervisor Password Utility
TOSHIBA HW Setup Utility
TOSHIBA Value Added Package
Card Reader Controller
Sound Driver
Wireless LAN Driver
Synaptics Touch Pad Driver
TOSHIBA HDD Protection
Bluetooth Stack for Windows by Toshiba
LAN Driver
Winbond CIR Driver
DVB-T/ATSC Tuner Driver
TOSHIBA USB Sleep and Charge Utility
TOSHIBA Face Recognition
TOSHIBA eco Utility
TOSHIBA HDD/SSD Alert
TOSHIBA Service Station
HDMI Control Manager
TOSHIBA Remote Control Manager
TOSHIBA Fingerprint Utility
PatchFiles
ConfigFree
TOSHIBA Assist
TOSHIBA Web Camera Application
Please note that some tools can be missing or there is some other difference. Notebooks are country specific products and maybe Australian models are preinstalled with few different tools and models in Europe and US.
Maybe you are looking for
-
X-Fi Xtrememusic and all X-Fi products
I have been corresponding with CL techs via email and telephone re: the connection of my xbox360 to my X-Fi XtremeMusic soundcard via optical cable to produce 5. DD from my analogue speakers (Creative T7700). After doing ALOT of research, many ppl (C
-
While raising purchase order in SAP as I am getting error :"Vendor`s/manufacturer`s QM system only valid to 30.06.2010" can anyone suggest the solution
-
I installed lms 4.2 and ran the first discovery. Everything looks good. What I am seeing is under My Menu -> My Dashboards -> Click on Functional, I am seeing a some strange screens I have never seen before. I have attached a screenshot of what I
-
How to install Air 3.9 SDK into FB 3.7
I cannot understand why Adobe doesn't make installers to update the SDK's more automatically. I have broken apps because of iOS 7, and must use the 3.9 AIR SDK to fix this problem, and resubmit my apps. What is so frustrating is to download the 3.9 B
-
Unknown error when renting a movie
I've never had an issue with renting from iTunes before, but I'm getting the following message tonight: "An unknown error occurred (- 50)." What is this? How do I fix it? I'm not seeing any support links or "report problems" from within iTunes. (I