ARDEIXTPGM: Message and the meaning!!!

I am using oracle Access Manager (a product from oracle) on AS400 to connect to oracle server. I have a batch program which connects to the oracle server. If this batch program is idle for sometime and then if a trigger activates it again it gives me an error like this:
ARDUPAR: ARDUPAR: rc=-1(OCI_ERROR) from OCIStmtExecute when asking for
Describe-Info
ARDUPAR(1): ORA-03135: connection lost contact
ARDARXBD(XD): rc = -1 when parsing
SQLSTATE class unknown - SQLSTATE 72000, SQLCODE -969.
What I did to overcome this is I put some more SQL commands in to check and now doing a disconnect and a connect again in my program, which works great and gives me these message right after the above messages.
Successfully disconnected from server HJAWCD1
Connected to server HJAWCD1 running ORACLE Version 10.2.0.3.0.
ARDEXITPGM: transaction_state should be IN_TRANSACTION or UOW_CHANGED but was NO_TRANSACTION
My question is regarding the last message coming out as ARDEXITPGM as to what it means.
Can anyone guess and let me know what that means in ORACLE.
Regards
Farhan

Post this here
Heterogeneous Connectivity
(or call Oracle support directly).
That's too specific for SQL and PL/SQL forum.
Werner

Similar Messages

[EWS][FastTransfer][MS-OXCFXICS] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

Hi Haiyang,
Your questions are not covered by the Open Specification documentation and this is documented in [MS-OXWSBTRF] — v20141018 section “1.3 Overview”.
The upload and export data stream is an opaque format that only needs to be understood by a server implementation. The client only serves as a repository for the opaque data stream so that it can be uploaded to the server at
a later time.
You made good progress in interpreting the buffer using other documents. Why do you need to be able to parse the data? Please describe your project in details and I might submit a suggestion to document the layout of the data stream,
if your project justifies it. You can send the description directly to me.
Thanks, Vilmos

[EWS][FastTransfer] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

OK. Thank you.
Today I build a stream with a paging rule as below:
1. Keep each page's byte length is 31680.
2. Make sure a complete property value in a page except binary type property whose value length is larger
than 31680.
And it can work very well when import the stream to the folder by EWS.

When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!

I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation.

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

Have you attempted a restore?

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What can I try to cancel

I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What else can I try to cancel

Can you log on to the email account via webmail in a web browser, view the email and delete it from there if necessary.

When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

Add this one to the list of thinks that don't work on the Apple Job Board. It looks like Apple is using ADP's VE (Virtual Edge) technology to run this system, and I've been stupified by the number of features that are just broken, or so poorly thought out by ADP as to be unusable, (certainly for webkit and mozilla browsers at least: I didn't bother checking IE.)
Here are a few highlights:
"My Job List", list of jobs applied for, seems to max out at three. You can apply for more than that, but you can only see the first three.
"Search Using Your Resume" feature yields few or no results, even when the pasted text contains only common, exactly matched words like 'Design' or 'Engineer'.
The missing resume upload, described in this thread.
"My Job Agent" seems to never flag anything, at least it hasn't ever for me despite pretty loose criteria.
Agent's created using "My Job Agent" eventually just disappear, which is fine because they don't seem to work.
When updating a profile, acknowledging the 'Terms' happens twice in a row.
Job seekers can only supply one cover letter despite being able apply for several jobs.
Pagination for search results only appears at the top of the page, so it's necessary to scroll down through each page, then up to the top again to proceed to the next page.
Well, I'm sure there are others, but you get the idea. I hope the Apple folks can fix this, (or twist ADP's arm to fix it,) so it better represents the quality of experience that Apple is so respected for consistently delivering.

When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message. How can I change the mail settings so that every reply is listed

When I receive and answer e-mail, the correspondence is usually "nested" "behind" the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox. How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message. I'm afraid I might accidentially overlook messages the way they are handled now.

Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread". I think that will make each message show individually.

The necessary shipping materials and the means of transport

The answer of the question below is "d. Shipping point". On the other hand, shipping type (shipment type determines how the goods will be transported - tuck, train, ship etc....) is entered in the "shipment type" at the customization.
Taking into consideration this fact, why is the answer of this question is given as "shipping point"?
What part of the company is responsible for the type of shipping, the necessary shipping materials and the means of transport?
Only one answer is correct.
a. Sales Organization
b. Transportation planning point
c. Shipping condition
d. Shipping point
e. Warehouse

hi
As per my knowledge, normally goods are transported from Plant through shipping point, So ultimately shipping point is the responsible for that.

I am unable to recieve media messages via text message and the profile says its not verified. How do i fix this?

i am unable to recieve media messages via text message and the profile in the settings says its not verified. How do i fix this?

MMS is a carrier feature. Contact the carrier to ensure you account is provisioned correctly.

HT1338 When trying to update my software, I get "an error occurred" message, and the update gets cancelled. How do I fix it?

When trying to update my software, I get "an error occurred" message, and the update gets cancelled. How can I fix this?

I have found other threads with this problem. The problem is that you are using your iTunes account on another user at the same time you want to update software. Just close iTunes from that user. See > https://discussions.apple.com/thread/4577180?start=0&tstart=0

I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

The trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser.

ARDEIXTPGM: Message and the meaning!!!

Similar Messages

Maybe you are looking for