Are you disappointed and frustrated with the Note 3? I feel the pain!
I feel everyone's pain with the Note 3 Issues! I have been in the tech field for 20 years and Verizon treats me as if it is the first time they are hearing about the issues! Rather that work on a fix, I've been told that I can leave my contract with no penalties!
I have documentation and screen shots of all my issues and here is the short list of what I've been through....
1. 80 + hours on the phones with a support team that close tickets without resolution, transfers you around the country to different call centers to start all over again,
2. 3 emails to Verizon Executive Office
3. A refurbished phone replacement of my brank NEW Note 3 that I was told would definitely fix the issues..
4. 4 Visits to Verizon stores, 2 Simm Card replacements, 2 Network Extenders, replacement charger cord and new battery
5. Conference calls with Samsung
6. Been offered a less expensive phone replacement for "free" ... yeah Verizon trade my Mercedes priced phone for a Neon...
7. Calls not returned by support agents
8. Text messages from technicians initiated by Verizon to me, from their work domain, never responded after multiple conversations with screen shots sent showing my issue
My issues:
1. Network signal drops constantly in my home. No mobile network errors, dropped calls, hanging texts, 1x signals. I am told by one group that I am in a 4g covered area and the other group that I am in a weak coverage area! My other Verizon phone has 4g yet support can't understand my logic that it is a phone issue!
2. Slow charging messages to use the original charger with my screen shot plugged into the brand new SAMSUNG charger
3. Battery usage of 10% per hour when my phone would last all day before the KitKat update and still have almost 70% remaining
4. Overnight battery drainage in 7 hours from 91% to 27% while OFF..no wifi on and no Bluetooth on
5. PIctures in my Gallery, that I can see and get file information for that are NOT there in the SD folder identified, and then mysterious disappear forever
All since the mandatory software update that you can not refuse, delete or revert back to factory version!
So now they are going to bring the Note 4 into the mix with KitKat 4.4.4 before they update and fix the software for the owners of the Note 3...
So what do I do? Switch to the Note 4 or wait or wait months with TERRIBLE service while Verizon tries to fix a bad update? By the time that happens Lollipop with be out!
This is so frustrating... the big 3 point the fingers around rather than collaborate..
Google makes the base Android Software update for a hardware device manufactured by Samsung that is sold by and placed on a Verizon Network. Verizon tweaks the software for "their" business. Verizon sends refurbished phones while under factory 1 year Warranty and sends devices . Samsung says everything leaves their business working properly but I can send my phone to them and be without my phone for 10 days while they "properly" flash the device for free. They tell me Verizon does not flash the device the same way and their way is "better". Who do I trust? And be without my phone for 10 days because Samsung "rigorously" tests everything???
And to top it all off... I wrote to Samsung's "Voice of the Customer" which is supposedly and direct complaint to the Executive Level. I wrote 3 times and 3 weeks later still no contact from Samsung. They should call it the "Voice into the Abyss!"
I'm sooooooooooo disappointed with my experience this year....
gooeysgran, we don't want this to be an ongoing issue for you. Have you powered your device off/on since retrieving that software update? Have you tried removing that Wi-Fi connection in the settings of your device?
For more device support, click http://vz.to/1kDL3MI
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
Similar Messages
-
Extremely Disappointed and Frustrated with ZFS
I feel like crying. In the last 2 years of my life ZFS has caused me more professional pain and grief than anything else. At the moment I'm anxiously waiting for a resilver to complete, I expect that my pool will probably fault and I'll have to rebuild it.
I work at a small business, and I have two Solaris 11 servers which function as SAN systems primarly serving virtual machine disk images to Proxmox VE cluster. Each is fitted with an Areca 12 port SATA controller put in JBOD mode, and populated with WD Caviar Black 2TB drives (probably my first and biggest mistake, was in not using enterprise class drives). One system is configured as a ZFS triple mirror, and the other a double mirror, both have 3 hot spares.
About a year ago I got CKSUM errors on one of the arrays I promptly ran zpool scrub on the array, and stupidly I decided to scrub the other array at the same time. The scrub quickly turned into resilvers on both arrays as more CKSUM errors were uncovered, and as the resilver continued the CKSUM count rose until both arrays faulted and were irrecoverable. Irrecoverable metadata corruption was the error I got from ZFS. After 20+ hours of attempted recovery, trying to play back the ZIL I had to destroy them both and rebuild everything. I never knew for certain what the cause was, but I suspected disk write caching on the controller, and/or the use of a non-enterprise class flash drive for ZIL.
In the aftermath did extremely thorough checking of all devices. I checked each backplane port, each drive for bad sectors, SATA controller onboard RAM, main memory, ran extended burn-in testing, etc. I then rebuilt the arrays without controller write caching and no seperate ZIL device. I also scheduled weekly scrubbing, and scripted ZFS alerting.
Yesterday I got an alert from the controller on my array with the triple mirror about read errors on one of the ports. I ran a scrub which completed and then I proceeded to replace the drive I was getting read errors on. I offlined the old drive and inserted a brand new drive and ran zfs replace. Re-silver started fast and then the rate quickly dropped down to 1.0MB/s, my controller began spitting out a multitude of SATA command timeout errors on the port of the newly inserted drive. Since the whole array had essential froze up, I popped the drive out and everything ran back at full speed, resilvering against one of the hot spares. Now the resilver soon started uncovering CKSUM errors similar to the disaster I had last year. Error counts rose and now my system dropped another drive off in the same mirror set and is resilvering 2 drives in the same set, with the third drive in the set showing 6 CKSUM errors. I'm afraid I'm going to lose the whole array again, as the only drive left in the set is showing errors as well. WTF?!?!?!?!?!?!
So I suspect I have a bad batch of disks, however, why the heck did zfs scrub complete and show no errors? What is the point of ZFS scrub if it doesn't accuratly uncover errors? I'm so frustrated that these types of errors seem to show up only during resilvers. I'm beginning to think ZFS isn't as robust as advertised....FMA does notify admins automatically through the smtp-notify service via mail notification to root. You
can customize this service to send notification to your own email account on any system.
The poster said he has scripted for ZFS, but I don't know if that means reviewing zpool status or
FMA data.
With ongoing hardware problems, you need to review FMA data as well. See the example below.
Rob Johnston has a good explanation of this smtp-notify service, here:
https://blogs.oracle.com/robj/entry/fma_and_email_notifications
For the system below, I had to enable sendmail to see the failure notice in root's mail,
but that was it.
Thanks, Cindy
I failed a disk in a pool:
# zpool status -v tank
pool: tank
state: DEGRADED
status: One or more devices are unavailable in response to persistent errors.
Sufficient replicas exist for the pool to continue functioning in a
degraded state.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or 'fmadm repaired', or replace the device
with 'zpool replace'.
scan: resilvered 944M in 0h0m with 0 errors on Mon Dec 17 10:30:05 2012
config:
NAME STATE READ WRITE CKSUM
tank DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
c3t1d0 ONLINE 0 0 0
c3t2d0 UNAVAIL 0 0 0
device details:
c3t2d0 UNAVAIL cannot open
status: ZFS detected errors on this device.
The device was missing.
see: http://support.oracle.com/msg/ZFS-8000-LR for recovery
errors: No known data errors
Check root's email:
# mail
From [email protected] Mon Dec 17 10:48:54 2012
Date: Mon, 17 Dec 2012 10:48:54 -0700 (MST)
From: No Access User <[email protected]>
Message-Id: <[email protected]>
Subject: Fault Management Event: tardis:ZFS-8000-LR
To: [email protected]
Content-Length: 751
SUNW-MSG-ID: ZFS-8000-LR, TYPE: Fault, VER: 1, SEVERITY: Major
EVENT-TIME: Mon Dec 17 10:48:53 MST 2012
PLATFORM: SUNW,Sun-Fire-T200, CSN: 11223344, HOSTNAME: tardis
SOURCE: zfs-diagnosis, REV: 1.0
EVENT-ID: c2cfa39b-71f4-638e-fb44-9b223d9e0803
DESC: ZFS device 'id1,sd@n500000e0117173e0/a' in pool 'tank' failed to open.
AUTO-RESPONSE: An attempt will be made to activate a hot spare if available.
IMPACT: Fault tolerance of the pool may be compromised.
REC-ACTION: Use 'fmadm faulty' to provide a more detailed view of this event. Run 'zpool status -lx' for more information. Please refer to the associated reference document at http://support.oracle.com/msg/ZFS-8000-LR for the latest service procedures and policies regarding this diagnosis. -
I frequently get the messages "windows couldn't sign you out" (I am signed out) ,"not connected to in the internet" with prompts to sign in again (I don't) and "you're currently working offline", with a prompt to connect to my own locked wireless. None of these statements are true and I ignore the prompts (although my husband did re-sign on to our router once). I find that if I unplug the phone line and then plug it in again, it works. Strange. Is someone trying to get my password?
== This happened ==
A few times a week
== when we had internet installed by comcastTry Settings > General > Reset > Reset Network Settings.
Read this:
http://support.apple.com/kb/TS4008 -
You are making me very frustrated with your contorted way of communicating.
You are making me very frustrated with your contorted way of communicating
I tried the suggested procedures. Took out cartridges, replaced them in proper order. Shut off machine. Unplugged machine for more than 10 minutes.
After plugging in machine & turning on, the same error message appeared. It is constant and the machine will not perform in any way including for scanning.
The suggested procedure did not eliminate the error. Your message suggested I go through the "contact us" screen but I've done that twice already.
Not willing to play that dumb game again.Hi Sjpop,
To have a better understanding of your issue, please let everyone know what operating system and equipment you are using. That way, community will be able to assist you with suggestions appropriate for your product.
Thanks! -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
Creating that blur using my brush. When I paint the area, which highlights in red, I bring the clarity down to create more of that blur but what ends up happening is that my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area I am painted by automatically becoming over exposed. Does anyone else have this problem that can help me?
Quote
Do you think I should try to find a cheap mobo to OC my current CPU? How about trying to find one (mobo) used? I fear that my only realistic choice will be to scrap the CPU and eventually buy a new mobo and CPU, but as the CPU was only released just under two years ago I would value being over to overclock it with a cheap enough mobo to last me another year or so.
Who knows what additional problems may be run into by switching mainboards & such. The OS would have to be reinstalled fresh, etc. Money wise, it wouldn't make a lot of sense to invest more into a system that is rather outdated. The small performance gain making the switch to another board using the CPU you have, just doesn't really make much sense, especially if what you have now is completing the tasks asked of it. Save up some money, set it aside for a future build. There are plenty of new platforms in the works. -
Hello all,
I saw this message in my Iphone 5 notes.
It reads " Stop! who are you? And why can I read your and you my notices?? "
I did not write it.
Please has anyone had any similar experience?
Any suggestions/solution would be greatly appreciated.
ThanksoliverMili wrote:
Hello all,
I saw this message in my Iphone 5 notes.
It reads " Stop! who are you? And why can I read your and you my notices?? "
I did not write it.
Please has anyone had any similar experience?
Any suggestions/solution would be greatly appreciated.
Thanks
I had a similar experience with mac e-mail where apparently someones ICLOUD id for their Iphone was created with an Alias I had @mac.com for years. Originally thought the mail was phishing and deleted without opening - then received forwarded mail from the other persons non-apple account - so gave feedback through mail to apple and also sent an email to the other persons non-apple account from a non-apple account telling them I was getting their mail because it was my alias.
That person did get apple to untangle the accounts so I did have to reset my password once it was done.
So one option would be to contact apple support to get them to find out what is going on with your account.
E-mail contact of the other person was easy once I had a legit account to send to -- don't know how you would contact the other person in notes. -
My little cousin scratched my i tunes gift card with a key and now I am not able to decipher the code on the back. Is there any way of still being able to redeem the gift card?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Answering quickly, though, see:
http://support.apple.com/kb/TS1292
Regards. -
The subject lne says it all--shame on you.
Hi bumanuel,
Did you download a 30-day trial of Acrobat? What are you trying to do with that trial? Did you want to convert PDF files to Word/Excel, for example? Or some other task? The 30-day free trial is just that, and there should be no prompts to buy anything. Once the trial is over, either you subscribe at that point if you want, or just stop using the software.
I would love to help--let me know what I can do.
Best,
Sara -
Please, I am in a very big problem
I designed the project by Adobe director
And you test the software on the computers on Windows and works with high quality
When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
But I have a problem too big
The project works on some devices and others show me messages mistakes and why chasm different operating system version
Apple's Macintosh and these messages
"biosegnatures" can't be opened becouse it 's from undefined developer "
others
shokwave player error
pleas what can i doWelcome to the Support Communities.
m.raslan wrote:
I tested the project on Apple Macintosh operating system
Click on the menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
Update your product list
m.raslan wrote:
"biosegnatures" can't be opened becouse it 's from undefined developer "
This Apple doc may help:
OS X: About Gatekeeper
m.raslan wrote:
shokwave player error
Is Shockwave Player installed?...
http://www.adobe.com/shockwave/welcome/
...If not, get it here:
http://get.adobe.com/shockwave/ -
I cannot sync an album bought on iTunes on my phone to my mac. I have tried everything and it will still not transfer over. The album is clearly there in my music on my phone. Feeling frustrated.Please help!
Hello Kirrajo
Have you tried the transferring purchases in the File drop down menu? Also you can download your purchase by checking the second article to see your purchases within your library or by going to the iTunes Store and click the Purchases link.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
-Norm G. -
I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more
Any solution ?
I'm using iOS 6.1.2 IPad 3
RegardsI have also noticed the same "problem". I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.
-
I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?
It's possible, I suppose. Unlikely, but possible. Someone would have to be extremely driven to fix your broken phone specifically to look at your notes though.
-
Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?
Only the carrier it is locked to can authorize unlocking it. Sounds like the phone was hacked to unlock it originally. Find out what carrier it is locked to, and look up their contact information using google or the search engine of your choice.
-
I am sick of the joke Album Artwork for the Jimi Hendrix album Are You Experienced. Gomer Hendrix is not funny anymore. How do I make it go away?
twocars wrote:
I am sick of the joke Album Artwork for the Jimi Hendrix album Are You Experienced. Gomer Hendrix is not funny anymore. How do I make it go away?
Works fine here.
Maybe you are looking for
-
Please letm know if there is any way for me to unlock my iphone 5 ios 6.1.4 completely free. that was donated to me by one of the members of the church for which I am the Pastor.the phone that I had was broken and had no way to communicate other that
-
Can the iPhoto Library package file be recreated?
I recently moved my iPhoto library to a new LaCie solid state external hard drive, because it had reached 130GB in size and was taking up too much space on my hard drive. My iPhoto library has 30,000 photos with lots of events, smart albums and metad
-
PI 7.0: Message prioritisation in adapter engine for SOAP adapter.
Hi All, We have both high and low priority synchronous messages using the SOAP sender Channel of the Central AE. How can we make sure that High Prio messages ALWAYS get a thread right away when entering the AE? Installing a separate AE is not an opti
-
The trouble of applying Microsoft Update in June 2006
Hi, I used an ActiveX control in BSP Application(IC Web Client), and it worked fine. However, JavaScript error occured when latest Microsoft Update was applied. It was not possible to control ActiveX. Perhaps, I think that it is because of Microsoft
-
Using Photoshop Elements 12, the photos I edit using any of the editing layers are not saved. Only the original appears in the organizer even though I have selected "version sets" in the saving process. Any suggestions or do I have a lemon of a prog