ARGGG Help with dreaded red X on wedding invite dvd

I made our wedding invitation on IDVD. I made a test copy - worked fine - but noticed two photo's weren't in the order that I wanted. I went back to the system, swapped out the two photo's - now I get a red X on the main startup menu and the system says I can't burn because menus are longer than 15 minutes in duration. This is new ...
I've tried everything - setting all durations to 0, eliminating 2/3rds of the chapters - nothing eliminates this dreaded red x.... and now I can't burn my movie - even though I could yesterday...
I read the help on here about setting durations to 0 - did that... still nada... no help - still the red X. I play the start up movie - it lasts all of 30 seconds... what am I doing wrong?

Instead of "Adding Title Menu" to each submenu - I was doing it to the first one - then copying the button and pasting it onto the other pages. This was my "smart" way of avoiding having to reformat the button every time - and to have consistency across pages. The problem is when you do that - it does something strange to the project - however, if I go to each page and go to the Plus sign and add the title menu button - it doesn't cause this issue.
Ideally I would like to be able to set font preferences for the entire project - but don't see where this can be done.

Similar Messages

Help with burning large project on dual layer DVD

Hi need help please.
I am busy with a SD 16x9 project 215 minutes long so I am trying to use dual layer DVD's. The project has a serious menu setup (well I think so), it starts with a intro and go's into the main menu with sub menu's and so on. my problems is the following:
if I burn a image all works well if I burn a disc from the image or using encore the menu once using a DVD player is very slow (the last half of the links on the time line) and some links get mixed up (if I press play dvd on the 3rd sub menu it somtimes starts in the correct place and somtimes it starts one link later).
is this caused by the break in the layer and what can I do to correct it or to get it better.
thanks
Darren

Are you using any motion menus? Have you exceeded the 1 gig limit for menus etc?
I assumed 16:9 and forgot to look before I started posting: it does not look like it, but be sure you don't have more than 18 buttons per menu (if it is 16:9).
With lots of short clips, break position should not be an issue. You can export to a folder and use imgburn which gives more control over layer breaks.
Even though complex, it all looks straight forward, and, even though I can't see the image detail, it looks okay. The most likely issue in such a project is that Encore got lost as you made changes/corrections. Sometimes they can be fixed. Other times, the solution is a do over. Newer versions for Encore appear more robust (fewer problems and more likely to fix problems), but no versions appear to be free of such issues.

Need help with MPEG1,2,4 - QT vs. DVD

I tried burning some public domain Betty Boop cartoons to DVD. Upon playing back the DVD, some had good video but no sound; others had decent sound but pretty bad video.
Playing in QT, all play okay. Going into the Video TS folder and playing the VTS files from there, some have no video but ok audio, and some the opposite. Same is true playing the VTS files in MPEGStreamclip. I am able to isolate some of the problems but am confused with others. Examples, by titles (BB=Betty Boop):
“BB-Chess-Nuts” - DVD=good video with no audio. QT=good video, good audio. QT tells me it is MPEG-2 Muxed. 640x480. (Toast tells me the video is MPEG2 and the audio is MPEG1).
“BB-Bamboo Isle” - DVD=bad video, ok audio. QT= good video, good audio. QT tells me it is MPEG-4 vid, AAC aud. 320x240. (Toast tells me it is MPEG-4 vid and MPEG-4 aud.)
“BB_Old Man of the Mountain” - DVD=bad video, ok audio. QT=good video, good audio. QT tells me it is MPEG1 Muxed. (Toast tells me it is MPEG-1 vid and MPEG-1 aud.)
I am in OS 10.3.9, QT 7.1 Pro., Toast Titanium 7.0.1
Any ideas, help will be appreciated.
nÔÔdle--hëad

You should search the discount bin at your favorite DVD store. Titles like these can be had for under $10.
You will always get bad video when moving from MPEG-1 dimensions (320 width) to MPEG-2 (DVD size is 720).
Nothing you can do about this fact. Pixels are really only doubling in size when you export to MPEG-2 size. Same facts with your MPEG-4 file.
You must always use MPEG Streamclip for these exports. QuickTime Pro can't extract audio from muxed file formats (MPEG 1 or 2).

Need help with setting up lightscribe to burn onto dvd label with external

Bought the LG external mac compatible drive and have the smile on my mac disc label (bought) - have set the 'CD Boundary for text formatting' to LightScribe Full Label and there is supposed to be a lightscribe pop-up popping up when i press print but no pop up.
Could the lightscribe that i downloaded from their site not be installed even though it said 'successfully installed?'
anyone know what i am talking about? and could help?
thx
debcoo

Lightscribe is not an Apple product, so you might get better answers on the Lightscribe forums:
http://www.lightscribe.com/discussionBoards/index.aspx?g=posts&t=4296

Help with putting 2 seperate videos onto 1 Dvd

I have been looking around for a tutorial to put 2 separate video on 1 Dvd using Premier then exporting not only the single sequence or videos to Encore but i want to export them as 2 separate videos that can be triggered separately in encore by the click of their names on a premade menu. So i want Premier to basically encode these 2 videos separately under the 4.7 gig. amount and be able to manipulate(set menu items to trigger the movies) them in encore.

Make your sequences, export out as DV AVI files, bring them into Encore and author as usual.

Need help with convertor from cd-r VCD into dvd format compatibility

my sister got married at India, the video was burned in cd-r as in VCD and it will play in USA DVD PLAYER but however it wont play on powerbook or any laptop. How do I convert the setting and make it enable to view on laptop or IMovie or IDVD.
Thanks!

Well, you could try doing a crc check of the cd using crc.exe. It's been of great use to me recently.
open up a command window, switch to the directory where you've extracted crc.exe and run (change x to your cd/dvd drive letter):
crc x:

I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?

I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?
jacknil

I found an answer to this on another page (I was having the same problem) This worked for me:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
more here: https://discussions.apple.com/thread/5596831

TS1463 What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not w

What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not working, please help me...

If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
B-rock

I am trying to sync my Ipad 2 to my Itunes account on my laptop. It will only sync my purchased music. All of my personal CD music that is on the account is grayed out with a red circle at the end. Please help.

I am trying to sync my Ipad 2 to my Itunes account on my laptop. It will only sync my purchased music. All of my personal CD music that is on the account is grayed out with a red circle at the end. Please help.

Did you select all of the music to sync by clicking on the playlists or albums or whatever you use in iTunes - in order for them to sync? Or did you click on Entire Music Library if you want all of your music on the iPad?

Hi, imessages won't send from my macbook pro. I am still able to recieve them on mac. I am also able to send and receive on iphone. However on mac every time i press send (enter/return) it disappears, with no red '!' or anything. Any help?

Hi, imessages won't send from my macbook pro. I am still able to recieve them on mac. I am also able to send and receive on iphone. However on mac every time i press send (enter/return) it disappears, with no red '!' or anything. Any help?

Triple check the Outgoing Mail server info that you entered in your Mail account. If that area says the info is optional enter the outgoing mail server and your password anyway. Also if you have more than one email account check the server that is selected for the GoDaddy account and make sure it's the correct server for the account.

I can't drag and drop any music from iTunes into the iPad tab on the left it just come up with a red cross ? Help !

I just up loaded a load of music onto my computer and then when I press ctrl and s and try to drag the album tag over the iPad one it just comes up with a red cross and won't let me drop anything in it !

You will need to Sync your iPad and all Music/Albums Selected will transfer over from iTunes..
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386

The new 8.2 update has left me with a red itunes logo and a charger end on the screen, i cannot use the phone at all, please help

the new 8.2 update has left me with a red itunes logo and a charger end on the screen, i cannot use the phone at all, please help

Your phone is in recovery mode; connect it to a computer and use iTunes to restore it.
~Lyssa

Can someone help with my download of inDesign CS6?

We bought inDesign CS6 online, but it didn't come with a disk. Instead I was prompted to go to the following link http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
After downloading CS6 Design Standard (files 1 and 2), the larger of the two files was saved to my download folder as a 7Z file. The smaller file was the "extractor." I click on that and it gives me the folder location box, then I click next. At that point, the following message appears: "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder" After click OK, this message appears: "A problem occurred while extracting the archive. Please try downloading the Adobe CS6 Design Standard again." After clicking OK, this is the last message that comes up: "Exception EListError in module DesginStandard_CS6_LS16exe at 0001B6E3. List index out of bounds (0)," accompanied by the dreaded red X.
This wasn't a cheap purchase. And my computer is only five months old, so memory shouldn't be an issue. Does anyone have any suggestions? For starters, an idea on how to open a 7Z file? Any and all help would be greatly appreciated. Thank you!
Dan

here are some, Best Free Download Manager
they should all have a 'resume' feature, but you should double check because it's the feature you really need.

Help with If Statement from Drop Down

Hello,
I'm not too familiar with setting up custom scripts and was wondering if anyone here might be able to help me. I am trying to calculate a discount value in a pricing form if the customer is applicable for a military/senior discount, but if the customer isn't applicable I want the field to calculate the total without factoring in a discount.
I took a screen shot and circled the fields that I'm concerned with in red. If anyone could help I would greatly appreciate it!

Let's assume the field names are "Subtotal", "Military Discount" and "Military Discount Amount".
You can use this code as the custom calculation script of the latter:
if (this.getField("Military Discount").value=="Yes") event.value = Number(this.getField("Subtotal").value) * 0.05;
else event.value = "";

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

ARGGG Help with dreaded red X on wedding invite dvd

Similar Messages

Maybe you are looking for