Visa Charged - Order Status has Changed

Looks like those of us that ordered on the verizon site on 9/14 might get the iPhone 5 before or on 9/21/12
My CC was just charged and finally the order status page has been updated.

it's looking good.. after finally getting billed and getting screenshot above.. I called CS and followed automated menu - option 4 and say "order status" -- automated response says "order has shipped and will receive in two business days"

Similar Messages

If my IPHONE 5 order status has changed from "processing" to "preparing for delivery" is there a chance I will receive it sooner than the 10/5 date that it is scheduled for?

I pre-ordered my iPhone 5 on 9/15 at 4am EST. It said shipping in 2 weeks with an delivery date of 10/5... yadda yadda yadda. This morning my order status showed as 'processing'. This afternoon it changed to 'preparing for delivery'. Is there a chance I will now receive before 10/5? Trying to plan accordingly. Thanks in advance for any info you can give.

I was in the same boat. I ordered @ 5:09AM EST on 9/14 and had the 10/5 delivery date. My status changed from processing to preparing to ship yesterday 9/21. I got an e-mail from Apple @ 4:22AM this morning 9/22 that it has shipped (along with the precious tracking #)! I would expect it would arrive by this Friday 9/28 at the latest.

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6. 10.6.7 now appears to be missing from the computer and my administrator status has changed to standard.

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.

PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps.

Production order status as "Change by external system"

Hi,
I am come across the production order status as "Change by external system"
In what condition above status is maintain in production order.
Please help me.
Sanjay

Any change in the order done in the external system other than SAP, this status is set by the System.
For example XMII.
Regards
Ratan

How can I add a link to an item within a workflow email - which will always find the item - even if it's status has changed?

I've used the method within the SharePoint designer to add a link to the workflow context current item URL, but when the current item status changes then obviously this link will no longer work.
How can I change this link so that it will always open the item, even if someone has changed it within the list, before I clink on the link?
This is an important one as over 300 people will use the list and many of these will be emails about items on the list will be in different time zones. I don't want to have lots of mails from people saying "this list doesn't work" as it's
critical they keep using it.
Please help.
P.S. I don't know if the <href> method will work, so if someone can confirm to me then that would be great.

Hi,
According to your post, my understanding is that add a link to an item within a workflow email.
I’ m not very clear about the status you said. Please descript more detail which URL do you want to display.
Per my knowedge, you can display the following url in your email body:
[%Workflow Context: Current Item URL%]
[%Workflow Context: Current Site URL%]
[%Workflow Context: Workflow Status URL%]
[%Current Item: Encoded Absolute URL%]
Please start the workflow automatically when an item is changed and changed.
No matter how you edit the item or update the approve status, the URLs remains the same.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Service Order status Not Changing From Resloved to Closed status

The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........

Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ...

Update sales orders status after changing item completion rule

Hello!
I've just changed the item completion rule of a given sales document item (from 'B' to blank). But we have several old orders, which have deliveries created with reference, with some fields still open (due to the 'no reference' status at the item level). The orders created after the new condiguration are ok.
So, is there any way I can update the status of those old orders? Already tried the report SDVBUK00, but did not work out.
Any ideas are welcome.
Thanks.
Adriano Cardoso

Hi,
check if oss note 1472007 helps.
Regards,
JM

Can I see who loaded PL00 data once status has changed?

Hello there,
The SEM-BCS monitor allows you to see who last changed the status of a task (i.e. loaded, locked etc.).
Does anybody know how we can show who last loaded data (in particular PL00 data) once the task for this load has been locked (and the status details thereby only show who locked the task)?
Thanks and regards
IM

Ehm, actually I have no clue, but I recommend to read the HowTo "Trace changes of BCS Masterdata" and use the principle on this topic.
Browse to http://www.service.sap.com/solutions
-> Solution Details -> Business Solutions and
Applications -> SAP Business Suite -> SAP ERP -> SAP ERP Analytics -> SAP Strategic Enterprise Management (SAP SEM) -> Business Consolidation -> Media Library -> How Tos
and there is the HowTo for tracing changes on master data.
maybe this will help.
BR

Sales order status not changed

Even after all line items Delivered and Accounting document cleared, sales order's status is "Being Processed".
SO is still showing open order list in VA05..There are not much changes done in SO...What could be the reason...

Just check the customer master in Sales Area data Shipping tab - Partial delivery per item. It should be set as D - No limit to subsequent deliveries. Change it to some other value as per the business requirement, and check with new order. It will not show the status Being Processed.
Master data plays a major role in any such conditions.
Thanks/Sheetal

As per scope of list order type has changed in ME57

Hi,
I have created PR in doc type NB and using t-code Me57 i have tried to create PO, with selection scope of list A it is going correct means as per the requirement order type shows ZAB and when i select scope of list ZALV which has customized then tried to create PO now order type shows NB.
Please guide me.
Thanks
Shital

Hi,
I have tried this and scope of list A is working but ZALV is not working
Thanks
Shital

How to track Service Order Status Change (IW31/IW32).

I have a requirement to send the customer an Email if the status of service order has been changed say from unconfirmed to confirmed. So i have to find out whether the status of the service order has been changed on the current date.
As per my understanding, Changes corresponding to any object are stored in tables CDHDR and CDPOS if the change document creation is enabled for that object. But in case of service order status, the changes are not being captured in these tables because change document creation is not enabled for the data element (J_STONR) of service order status.
Anyone having any knowledge about it please help me.
Edited by: Gagan Garg on Feb 23, 2009 6:52 AM

Hi,
Thanks for your reply. I have found out the way to track the service order changes. Function module STATUS_READ_MULTI can be used for the same. Pass service order number in OBJNR_TAB and the change document for status is returned in JCDS_TAB

Changing a crm order status

Hi!!! I wrote a post some weeks ago but i didn't solve my problem... I need to make a change in a crm badi (ORDER_SAVE) to get the following results: when i create a new order it is created by default with status "open" and i want it to become "in process" so that it is created automatically in R/3..
In this badi i have tried some things, like using function CRM_ORDER_MAINTAIN, CRM_STATUS_CHANGE_INTERN_VB.. but i it doesn't work..
Has anyone any idea to do this ??
thanks in advance !!

ok, my source code is the following...
LOOP AT i_crmd_orderadm_h.
    CLEAR: str_stat, lv_stat, ti_crm_jest.
    REFRESH: ti_crm_jest.
    SELECT *
      FROM crm_jest
        INTO TABLE ti_crm_jest
          WHERE objnr = i_crmd_orderadm_h-guid.
    LOOP AT ti_crm_jest.
      str_stat-stat   = ti_crm_jest-STAT.
      str_stat-inact = 'X'.
      APPEND str_stat TO lv_stat.
      CLEAR str_stat.
    ENDLOOP.
    ls_input_fields-ref_guid         = i_crmd_orderadm_h-guid.
    ls_input_fields-ref_kind         = 'A'.
    ls_input_fields-objectname       = 'STATUS'.
    ls_input_field_names-fieldname   = 'ACTIVATE'.
    INSERT ls_input_field_names
                   INTO TABLE ls_input_fields-field_names.
    INSERT ls_input_fields INTO TABLE lt_input_fields.
    CLEAR ls_status.
    REFRESH lt_status.
    ls_status-ref_guid = i_crmd_orderadm_h-guid.
    ls_status-ref_kind = 'A'.
    ls_status-status   = 'E0002'.
    ls_status-activate = ' '.
    APPEND ls_status TO lt_status.
    CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
        IT_STATUS         = lt_status
      CHANGING
        CT_INPUT_FIELDS   = lt_input_fields
      EXCEPTIONS
        ERROR_OCCURRED    = 1
        DOCUMENT_LOCKED   = 2
        NO_CHANGE_ALLOWED = 3
        NO_AUTHORITY      = 4
        OTHERS            = 5.
    CLEAR ls_status.
    REFRESH lt_status.
    ls_status-ref_guid = i_crmd_orderadm_h-guid.
    ls_status-ref_kind = 'A'.
    ls_status-status   = 'E0003'.
    ls_status-activate = 'X'.
    APPEND ls_status TO lt_status.
    CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
        IT_STATUS         = lt_status
      CHANGING
        CT_INPUT_FIELDS   = lt_input_fields
      EXCEPTIONS
        ERROR_OCCURRED    = 1
        DOCUMENT_LOCKED   = 2
        NO_CHANGE_ALLOWED = 3
        NO_AUTHORITY      = 4
        OTHERS            = 5.
    CALL FUNCTION 'CRM_STATUS_CHANGE_INTERN_VB'
      EXPORTING
        OBJNR = i_crmd_orderadm_h-guid
      TABLES
        STATUS = lv_stat.
    clear lv_stat.
    str_stat-stat = 'I1054'.
    str_stat-inact = 'X'.
    APPEND str_stat TO lv_stat.
    CLEAR str_stat.
    str_stat-stat = 'I1003'.
    str_stat-inact = ' '.
    APPEND str_stat TO lv_stat.
    CLEAR str_stat.
    CALL FUNCTION 'CRM_STATUS_CHANGE_INTERN_VB'
      EXPORTING
        OBJNR = ti_crm_jest-objnr
      TABLES
        STATUS = lv_stat.
    data: lt_basket_guid       TYPE crmt_object_guid_tab.
    INSERT i_crmd_orderadm_h-guid INTO TABLE lt_basket_guid.
    CALL FUNCTION 'CRM_ORDER_SAVE'
      EXPORTING
        IT_OBJECTS_TO_SAVE   = lt_basket_guid
        iv_update_task_local = 'X'
      IMPORTING
        et_saved_objects     = lt_saved_objects
      EXCEPTIONS
        DOCUMENT_NOT_SAVED   = 1
        OTHERS               = 2.
    IF NOT lt_saved_objects IS INITIAL.
      COMMIT WORK.
    endif.
ENDLOOP.
Yes.. i know it's a little "dirty" code, but it's the only way to make the report work well... my problem is that the order is replicated in R/3 but when i check the order in CRM the system status has changed but the user status no...

Order status:"ready for shipment"

my credit card company called today to make sure i authorized a charge for a substantial amount, so i figured things must be happening. sure enough, i checked my order status online at the apple store and it has been changed to "ready for shipment".
has anyone else's order status been changed, or iphones shipped?

its more of an issue with how long it takes your bank to credit your account. The refund from apple will go through that day

Need order status and tracking number please

Long story short, I need an accurate order status and an actual UPS tracking number for my order please.
Lenovo phone support has been unavailable since yesterday, and I've spent over 12 hours on hold on the webchat so far.
I ordered a Yoga 2 Pro on Feb 5th. On Feb 11th I received a shipping notice that my order had shipped on Feb 10th. The tracking number provided is a 10-digit UPS reference number that I cannot find on the website (even when searching by reference number).
On Feb 12th, the online order status page changed to indicate that my order was delivered on Feb 11th. This is not the case, as I have yet to receive my order.
Can someone from Lenovo staff please help?
Solved!
Go to Solution.

Well, I have received my laptop in the meantime, despite not having a tracking number.

Serv. Desk: Action: send an email only when a value in a field has changed

Hello,
In Soution Manager 4.0, Sevice Desk, I would like to create an action which creates an email only when a value of a certain field has changed.
- only in change mode relevant
- only when a value of one field has changed (e.g. Message Processort has changed from Buss. Partner 4 to 5. Than a mail should be sent to BP 5).
- it should only send this kind of email when the field value has changed in change mode. In other words: it should not sent the email e.g. when the status has changed.
I tried all kinds of things but I do not know on how to define the COnditions for an Action, so I can compare e.g.
if <old value> <> <new value>
Any ideas or experience on how to implement this without major modifications ?
Thanks
Christian

Hi Christian,
check out my question on SDN.
Email on Status Change
it has details on how to send an email when the status changes. I believe you are going to have to do something like this for each of the fields you want to create an Action Starting Condition for.
regards,
Jason

Visa Charged - Order Status has Changed

Similar Messages

Maybe you are looking for