ASA5505 port 3306 request discarded
ASA5505 port 3306
I have been fighting for days to open the port 3306 on my appliance, I have read carefully all the forums and no success.
I allways get the message :
7
Oct 21 2012
17:29:32
90.27.181.120
54655
212.147.49.18
3306
TCP request discarded from 90.27.181.120/54655 to outside:212.147.49.18/3306
I have attached m y configuration
thanks for any help
Hello Jean,
Just checked the config, the problem is that you did not follow the object service configuration I sent you.
Mine:
object service SQL
service tcp source eq 3306
Yours:
object service SQL
service tcp destination eq 3306
Please change that and let me know,
Remember to rate all of the helpful posts, that is as important as a thanks for the community ( if you need to know how to rate a post, just let me know, I will be more than glad to let you know )
Similar Messages
-
Azure can block mysql output port (3306)?
hello,
i have two servers one stays in Azure and one in Amazon.
in some moments of day i get error when try connect in mysql(Amazon), for test, i tryed make a telnet.
if i try
"telnet amazon 22"
i got sucess
if i try
"telnet amazon 3306"
i got failure
My question is " azure firewall or something can block some port automaticaly for some reason ? "
how i can "fix" this block?
ThanksHello mscampos92,
1. How have you connected your servers from Azure and Amazon?
Please ensure that you have port 3306 from the portal.
To configure an endpoint for the MySQL Server service:
1. In the Azure Management Portal, click Virtual Machines, click the name of your MySQL virtual machine, and then click Endpoints.
2. In the command bar, click Add.
3. On the Add an endpoint to a virtual machine page, click the right arrow.
4. If you are using the default MySQL TCP port of 3306, click MySQL in Name, and then click the check mark.
5. If you are using a different TCP port, type a unique name in Name. Select TCP in protocol, type the port number in both Public Port and Private Port, and then click the check mark.
To add a Windows Firewall rule that allows MySQL traffic from the Internet, run this command at an administrator-level Windows PowerShell command prompt on the MySQL server computer.
New-NetFirewallRule -DisplayName "MySQL56" -Direction Inbound –Protocol TCP –LocalPort 3306 -Action Allow -Profile Public
You can refer to this link for more information on this:
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-mysql-windows-server-2008r2/
As long as you have the ports open, Azure would not block the sql output.
However, if this does not work, I request you to let me know how exactly you have connected your servers.
Also refer:
http://azure.microsoft.com/en-in/documentation/articles/virtual-machines-provision-sql-server/#FW
Thanks,
Syed Irfan Hussain -
%ASA-7-710005: TCP request discarded error in Client to Site VPN in CISCO ASA 5510
Hi Friends,
I'm trying to built client to site VPN in CISCO ASA 5510 8.4(4) and getting below error while connecting cisco VPN client software. Also, I'm getting below log in ASA. Please help me to reslove.
Error in CISCO VPN Client Software:
Secure VPN Connection Terminated locally by the client.
Reason : 414 : Failed to establish a TCP connection.
Error in CISCO ASA 5510
%ASA-7-710005: TCP request discarded from <Public IP> /49276 to outside:<Outside Interface IP of my ASA> /10000
ASA Configuration:
XYZ# sh run
: Saved
ASA Version 8.4(4)
hostname XYZ
domain-name XYZ
enable password 3uLkVc9JwRA1/OXb level 3 encrypted
enable password R/x90UjisGVJVlh2 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
nameif outside_rim
security-level 0
ip address 1.1.1.1 255.255.255.252
interface Ethernet0/1
duplex full
nameif XYZ_DMZ
security-level 50
ip address 172.1.1.1 255.255.255.248
interface Ethernet0/2
speed 100
duplex full
nameif outside
security-level 0
ip address 2.2.2.2 255.255.255.252
interface Ethernet0/3
speed 100
duplex full
nameif inside
security-level 100
ip address 3.3.3.3 255.255.255.224
interface Management0/0
shutdown
no nameif
no security-level
no ip address
boot system disk0:/asa844-k8.bin
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server xx.xx.xx.xx
name-server xx.xx.xx.xx
name-server xx.xx.xx.xx
name-server xx.xx.xx.xx
domain-name XYZ
object network obj-172.17.10.3
host 172.17.10.3
object network obj-10.1.134.0
subnet 10.1.134.0 255.255.255.0
object network obj-208.75.237.0
subnet 208.75.237.0 255.255.255.0
object network obj-10.7.0.0
subnet 10.7.0.0 255.255.0.0
object network obj-172.17.2.0
subnet 172.17.2.0 255.255.255.0
object network obj-172.17.3.0
subnet 172.17.3.0 255.255.255.0
object network obj-172.19.2.0
subnet 172.19.2.0 255.255.255.0
object network obj-172.19.3.0
subnet 172.19.3.0 255.255.255.0
object network obj-172.19.7.0
subnet 172.19.7.0 255.255.255.0
object network obj-10.1.0.0
subnet 10.1.0.0 255.255.0.0
object network obj-10.2.0.0
subnet 10.2.0.0 255.255.0.0
object network obj-10.3.0.0
subnet 10.3.0.0 255.255.0.0
object network obj-10.4.0.0
subnet 10.4.0.0 255.255.0.0
object network obj-10.6.0.0
subnet 10.6.0.0 255.255.0.0
object network obj-10.9.0.0
subnet 10.9.0.0 255.255.0.0
object network obj-10.11.0.0
subnet 10.11.0.0 255.255.0.0
object network obj-10.12.0.0
subnet 10.12.0.0 255.255.0.0
object network obj-172.19.1.0
subnet 172.19.1.0 255.255.255.0
object network obj-172.21.2.0
subnet 172.21.2.0 255.255.255.0
object network obj-172.16.2.0
subnet 172.16.2.0 255.255.255.0
object network obj-10.19.130.201
host 10.19.130.201
object network obj-172.30.2.0
subnet 172.30.2.0 255.255.255.0
object network obj-172.30.3.0
subnet 172.30.3.0 255.255.255.0
object network obj-172.30.7.0
subnet 172.30.7.0 255.255.255.0
object network obj-10.10.1.0
subnet 10.10.1.0 255.255.255.0
object network obj-10.19.130.0
subnet 10.19.130.0 255.255.255.0
object network obj-XXXXXXXX
host XXXXXXXX
object network obj-145.248.194.0
subnet 145.248.194.0 255.255.255.0
object network obj-10.1.134.100
host 10.1.134.100
object network obj-10.9.124.100
host 10.9.124.100
object network obj-10.1.134.101
host 10.1.134.101
object network obj-10.9.124.101
host 10.9.124.101
object network obj-10.1.134.102
host 10.1.134.102
object network obj-10.9.124.102
host 10.9.124.102
object network obj-115.111.99.133
host 115.111.99.133
object network obj-10.8.108.0
subnet 10.8.108.0 255.255.255.0
object network obj-115.111.99.129
host 115.111.99.129
object network obj-195.254.159.133
host 195.254.159.133
object network obj-195.254.158.136
host 195.254.158.136
object network obj-209.164.192.0
subnet 209.164.192.0 255.255.224.0
object network obj-209.164.208.19
host 209.164.208.19
object network obj-209.164.192.126
host 209.164.192.126
object network obj-10.8.100.128
subnet 10.8.100.128 255.255.255.128
object network obj-115.111.99.130
host 115.111.99.130
object network obj-10.10.0.0
subnet 10.10.0.0 255.255.0.0
object network obj-115.111.99.132
host 115.111.99.132
object network obj-10.10.1.45
host 10.10.1.45
object network obj-10.99.132.0
subnet 10.99.132.0 255.255.255.0
object-group network Serversubnet
network-object 10.10.1.0 255.255.255.0
network-object 10.10.5.0 255.255.255.192
object-group network XYZ_destinations
network-object 10.1.0.0 255.255.0.0
network-object 10.2.0.0 255.255.0.0
network-object 10.3.0.0 255.255.0.0
network-object 10.4.0.0 255.255.0.0
network-object 10.6.0.0 255.255.0.0
network-object 10.7.0.0 255.255.0.0
network-object 10.11.0.0 255.255.0.0
network-object 10.12.0.0 255.255.0.0
network-object 172.19.1.0 255.255.255.0
network-object 172.19.2.0 255.255.255.0
network-object 172.19.3.0 255.255.255.0
network-object 172.19.7.0 255.255.255.0
network-object 172.17.2.0 255.255.255.0
network-object 172.17.3.0 255.255.255.0
network-object 172.16.2.0 255.255.255.0
network-object 172.16.3.0 255.255.255.0
network-object host 10.50.2.206
object-group network XYZ_us_admin
network-object 10.3.1.245 255.255.255.255
network-object 10.5.33.7 255.255.255.255
network-object 10.211.5.7 255.255.255.255
network-object 10.3.33.7 255.255.255.255
network-object 10.211.3.7 255.255.255.255
object-group network XYZ_blr_networkdevices
network-object 10.200.10.0 255.255.255.0
access-list XYZ extended permit ip 10.19.130.0 255.255.255.0 145.248.194.0 255.255.255.0
access-list XYZ extended permit ip 10.19.130.0 255.255.255.0 host 172.16.2.21
access-list XYZ extended permit ip 10.19.130.0 255.255.255.0 host 172.16.2.22
access-list XYZ extended permit ip 10.19.130.0 255.255.255.0 host XXXXXXXX
access-list XYZ_PAT extended permit ip 10.19.130.0 255.255.255.0 any
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 host 195.254.159.133
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 host 195.254.158.136
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 any
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 209.164.192.0 255.255.224.0
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 host 209.164.208.19
access-list XYZ_PAT extended permit ip 10.1.134.0 255.255.255.0 host 209.164.192.126
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.7.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.17.2.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.17.3.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.19.2.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.19.3.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.19.7.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.1.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.3.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.4.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.6.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.9.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.11.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 10.12.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.19.1.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.21.2.0 255.255.255.0
access-list nonat extended permit ip 10.1.134.0 255.255.255.0 172.16.2.0 255.255.255.0
access-list nonat extended permit ip host 10.19.130.201 172.30.2.0 255.255.255.0
access-list nonat extended permit ip host 10.19.130.201 172.30.3.0 255.255.255.0
access-list nonat extended permit ip host 10.19.130.201 172.30.7.0 255.255.255.0
access-list nonat extended permit ip object-group Serversubnet object-group XYZ_destinations
access-list nonat extended permit ip 10.10.1.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list nonat extended permit ip 10.19.130.0 255.255.255.0 host XXXXXXXX
access-list nonat extended permit ip 10.19.130.0 255.255.255.0 145.248.194.0 255.255.255.0
access-list Guest_PAT extended permit ip 10.8.108.0 255.255.255.0 any
access-list Cacib extended permit ip 10.8.100.128 255.255.255.128 145.248.194.0 255.255.255.0
access-list Cacib_PAT extended permit ip 10.8.100.128 255.255.255.128 any
access-list New_Edge extended permit ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
access-list XYZ_global extended permit ip 10.7.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.7.0.0 255.255.0.0
access-list XYZ_global extended permit ip 172.17.2.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.17.3.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.19.2.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.19.3.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.19.7.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.2.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.3.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.4.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.6.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.9.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.11.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.12.0.0 255.255.0.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.19.1.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 172.21.2.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.17.2.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.17.3.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.19.2.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.19.3.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.19.7.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.1.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.3.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.4.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.6.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.9.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.11.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 10.12.0.0 255.255.0.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.19.1.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.21.2.0 255.255.255.0
access-list XYZ_global extended permit ip 172.16.2.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list XYZ_global extended permit ip 10.1.134.0 255.255.255.0 172.16.2.0 255.255.255.0
access-list XYZ_global extended permit ip 172.30.2.0 255.255.255.0 host 10.19.130.201
access-list XYZ_global extended permit ip host 10.19.130.201 172.30.2.0 255.255.255.0
access-list XYZ_global extended permit ip 172.30.3.0 255.255.255.0 host 10.19.130.201
access-list XYZ_global extended permit ip host 10.19.130.201 172.30.3.0 255.255.255.0
access-list XYZ_global extended permit ip 172.30.7.0 255.255.255.0 host 10.19.130.201
access-list XYZ_global extended permit ip host 10.19.130.201 172.30.7.0 255.255.255.0
access-list XYZ_global extended permit ip object-group Serversubnet object-group XYZ_destinations
access-list XYZ_global extended permit ip object-group XYZ_destinations object-group Serversubnet
access-list ML_VPN extended permit ip host 115.111.99.129 209.164.192.0 255.255.224.0
access-list ML_VPN extended permit ip host 115.111.99.129 host 209.164.208.19
access-list ML_VPN extended permit ip host 115.111.99.129 host 209.164.192.126
access-list Da_VPN extended permit ip host 10.9.124.100 host 10.125.81.88
access-list Da_VPN extended permit ip host 10.9.124.101 host 10.125.81.88
access-list Da_VPN extended permit ip host 10.9.124.102 host 10.125.81.88
access-list Da_VPN extended permit ip host 10.9.124.100 10.125.81.0 255.255.255.0
access-list Da_VPN extended permit ip host 10.9.124.101 10.125.81.0 255.255.255.0
access-list Da_VPN extended permit ip host 10.9.124.102 10.125.81.0 255.255.255.0
access-list Sr_PAT extended permit ip 10.10.0.0 255.255.0.0 any
access-list Da_Pd_VPN extended permit ip host 10.9.124.100 10.125.80.64 255.255.255.192
access-list Da_Pd_VPN extended permit ip host 10.9.124.100 10.125.64.0 255.255.240.0
access-list Da_Pd_VPN extended permit ip host 10.9.124.100 host 10.125.85.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.100 host 10.125.86.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.101 10.125.80.64 255.255.255.192
access-list Da_Pd_VPN extended permit ip host 10.9.124.101 10.125.64.0 255.255.240.0
access-list Da_Pd_VPN extended permit ip host 10.9.124.101 host 10.125.85.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.101 host 10.125.86.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.102 10.125.80.64 255.255.255.192
access-list Da_Pd_VPN extended permit ip host 10.9.124.102 10.125.64.0 255.255.240.0
access-list Da_Pd_VPN extended permit ip host 10.9.124.102 host 10.125.85.46
access-list Da_Pd_VPN extended permit ip host 10.9.124.102 host 10.125.86.46
access-list XYZ_reliance extended permit ip 10.19.130.0 255.255.255.0 145.248.194.0 255.255.255.0
access-list coextended permit ip host 2.2.2.2 host XXXXXXXX
access-list coextended permit ip host XXXXXXXXhost 2.2.2.2
access-list ci extended permit ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
access-list ci extended permit ip 208.75.237.0 255.255.255.0 10.1.134.0 255.255.255.0
access-list acl-outside extended permit ip host 57.66.81.159 host 172.17.10.3
access-list acl-outside extended permit ip host 80.169.223.179 host 172.17.10.3
access-list acl-outside extended permit ip any host 172.17.10.3
access-list acl-outside extended permit tcp any host 10.10.1.45 eq https
access-list acl-outside extended permit tcp any any eq 10000
access-list acl-outside extended deny ip any any log
pager lines 10
logging enable
logging buffered debugging
mtu outside_rim 1500
mtu XYZ_DMZ 1500
mtu outside 1500
mtu inside 1500
ip local pool XYZ_c2s_vpn_pool 172.30.10.51-172.30.10.254
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any inside
no asdm history enable
arp timeout 14400
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-208.75.237.0 obj-208.75.237.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.7.0.0 obj-10.7.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.17.2.0 obj-172.17.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.17.3.0 obj-172.17.3.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.19.2.0 obj-172.19.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.19.3.0 obj-172.19.3.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.19.7.0 obj-172.19.7.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.1.0.0 obj-10.1.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.2.0.0 obj-10.2.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.3.0.0 obj-10.3.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.4.0.0 obj-10.4.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.6.0.0 obj-10.6.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.9.0.0 obj-10.9.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.11.0.0 obj-10.11.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-10.12.0.0 obj-10.12.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.19.1.0 obj-172.19.1.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.21.2.0 obj-172.21.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.1.134.0 obj-10.1.134.0 destination static obj-172.16.2.0 obj-172.16.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.201 obj-10.19.130.201 destination static obj-172.30.2.0 obj-172.30.2.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.201 obj-10.19.130.201 destination static obj-172.30.3.0 obj-172.30.3.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.201 obj-10.19.130.201 destination static obj-172.30.7.0 obj-172.30.7.0 no-proxy-arp route-lookup
nat (inside,any) source static Serversubnet Serversubnet destination static XYZ_destinations XYZ_destinations no-proxy-arp route-lookup
nat (inside,any) source static obj-10.10.1.0 obj-10.10.1.0 destination static obj-10.2.0.0 obj-10.2.0.0 no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.0 obj-10.19.130.0 destination static obj-XXXXXXXX obj-XXXXXXXX no-proxy-arp route-lookup
nat (inside,any) source static obj-10.19.130.0 obj-10.19.130.0 destination static obj-145.248.194.0 obj-145.248.194.0 no-proxy-arp route-lookup
nat (inside,outside) source static obj-10.1.134.100 obj-10.9.124.100
nat (inside,outside) source static obj-10.1.134.101 obj-10.9.124.101
nat (inside,outside) source static obj-10.1.134.102 obj-10.9.124.102
nat (inside,outside) source dynamic obj-10.8.108.0 interface
nat (inside,outside) source dynamic obj-10.19.130.0 obj-115.111.99.129
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-195.254.159.133 obj-195.254.159.133
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-195.254.158.136 obj-195.254.158.136
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-209.164.192.0 obj-209.164.192.0
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-209.164.208.19 obj-209.164.208.19
nat (inside,outside) source dynamic obj-10.1.134.0 obj-115.111.99.129 destination static obj-209.164.192.126 obj-209.164.192.126
nat (inside,outside) source dynamic obj-10.8.100.128 obj-115.111.99.130
nat (inside,outside) source dynamic obj-10.10.0.0 obj-115.111.99.132
nat (inside,outside) source static obj-10.10.1.45 obj-115.111.99.133
nat (inside,outside) source dynamic obj-10.99.132.0 obj-115.111.99.129
object network obj-172.17.10.3
nat (XYZ_DMZ,outside) static 115.111.99.134
access-group acl-outside in interface outside
route outside 0.0.0.0 0.0.0.0 115.111.23.129 1
route outside 0.0.0.0 0.0.0.0 115.254.127.130 10
route inside 10.10.0.0 255.255.0.0 10.8.100.1 1
route inside 10.10.1.0 255.255.255.0 10.8.100.1 1
route inside 10.10.5.0 255.255.255.192 10.8.100.1 1
route inside 10.8.100.128 255.255.255.128 10.8.100.1 1
route inside 10.8.108.0 255.255.255.0 10.8.100.1 1
route inside 10.19.130.0 255.255.255.0 10.8.100.1 1
route inside 10.99.4.0 255.255.255.0 10.99.130.254 1
route inside 10.99.132.0 255.255.255.0 10.8.100.1 1
route inside 10.1.134.0 255.255.255.0 10.8.100.1 1
route outside 208.75.237.0 255.255.255.0 115.111.23.129 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set vpn2 esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set vpn6 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set vpn5 esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set vpn7 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set vpn4 esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set vpn1 esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set vpn_reliance esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set c2s_vpn esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 86400
crypto dynamic-map dyn1 1 set ikev1 transform-set c2s_vpn
crypto dynamic-map dyn1 1 set reverse-route
crypto map vpn 1 match address XYZ
crypto map vpn 1 set peer XYZ Peer IP
crypto map vpn 1 set ikev1 transform-set vpn1
crypto map vpn 1 set security-association lifetime seconds 3600
crypto map vpn 1 set security-association lifetime kilobytes 4608000
crypto map vpn 2 match address NE
crypto map vpn 2 set peer NE_Peer IP
crypto map vpn 2 set ikev1 transform-set vpn2
crypto map vpn 2 set security-association lifetime seconds 3600
crypto map vpn 2 set security-association lifetime kilobytes 4608000
crypto map vpn 4 match address ML_VPN
crypto map vpn 4 set pfs
crypto map vpn 4 set peer ML_Peer IP
crypto map vpn 4 set ikev1 transform-set vpn4
crypto map vpn 4 set security-association lifetime seconds 3600
crypto map vpn 4 set security-association lifetime kilobytes 4608000
crypto map vpn 5 match address XYZ_global
crypto map vpn 5 set peer XYZ_globa_Peer IP
crypto map vpn 5 set ikev1 transform-set vpn5
crypto map vpn 5 set security-association lifetime seconds 3600
crypto map vpn 5 set security-association lifetime kilobytes 4608000
crypto map vpn 6 match address Da_VPN
crypto map vpn 6 set peer Da_VPN_Peer IP
crypto map vpn 6 set ikev1 transform-set vpn6
crypto map vpn 6 set security-association lifetime seconds 3600
crypto map vpn 6 set security-association lifetime kilobytes 4608000
crypto map vpn 7 match address Da_Pd_VPN
crypto map vpn 7 set peer Da_Pd_VPN_Peer IP
crypto map vpn 7 set ikev1 transform-set vpn6
crypto map vpn 7 set security-association lifetime seconds 3600
crypto map vpn 7 set security-association lifetime kilobytes 4608000
crypto map vpn interface outside
crypto map vpn_reliance 1 match address XYZ_rim
crypto map vpn_reliance 1 set peer XYZ_rim_Peer IP
crypto map vpn_reliance 1 set ikev1 transform-set vpn_reliance
crypto map vpn_reliance 1 set security-association lifetime seconds 3600
crypto map vpn_reliance 1 set security-association lifetime kilobytes 4608000
crypto map vpn_reliance interface outside_rim
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto isakmp identity address
no crypto isakmp nat-traversal
crypto ikev1 enable outside_rim
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 28800
crypto ikev1 policy 2
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto ikev1 policy 4
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 28000
crypto ikev1 policy 5
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 10.8.100.0 255.255.255.224 inside
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
no threat-detection basic-threat
no threat-detection statistics access-list
no threat-detection statistics tcp-intercept
group-policy XYZ_c2s_vpn internal
username testadmin password oFJjANE3QKoA206w encrypted
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXXtype ipsec-l2l
tunnel-group XXXXXXXXipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXX ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group XYZ_c2s_vpn type remote-access
tunnel-group XYZ_c2s_vpn general-attributes
address-pool XYZ_c2s_vpn_pool
tunnel-group XYZ_c2s_vpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
inspect ip-options
service-policy global_policy global
privilege show level 3 mode exec command running-config
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command crypto
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:caa7476cd348ed89b95d37d4e3c9e1d8
: end
XYZ#Thanks Javier.
But i have revised the VPN confuration. Below are the latest configs. with this latest configs. I'm getting username & password screen while connecting cisco vpn client software. once we entered the login credential. it shows "security communication channel" then it goes to "not connected" state. Can you help me to fix this.
access-list ACL-RA-SPLIT standard permit host 10.10.1.3
access-list ACL-RA-SPLIT standard permit host 10.10.1.13
access-list ACL-RA-SPLIT standard permit host 10.91.130.201
access-list nonat line 1 extended permit ip host 10.10.1.3 172.30.10.0 255.255.255.0
access-list nonat line 2 extended permit ip host 10.10.1.13 172.30.10.0 255.255.255.0
access-list nonat line 3 extended permit ip host 10.91.130.201 172.30.10.0 255.255.255.0
ip local pool CO-C2S-VPOOL 172.30.10.51-172.30.10.254 mask 255.255.255.0
group-policy CO-C2S internal
group-policy CO-C2S attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list vlauel ACL-RA-SPLIT
dns-server value 10.10.1.3
tunnel-group TUN-RA-SPLIT type remote-access
tunnel-group TUN-RA-SPLIT general-attributes
default-group-policy CO-C2S
address-pool CO-C2S-VPOOL
tunnel-group TUN-RA-SPLIT ipsec-attributes
pre-shared-key sekretk3y
username ra-user1 password passw0rd1 priv 1
group-policy CO-C2S internal
group-policy CO-C2S attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list vlauel ACL-RA-SPLIT
dns-server value 10.10.1.3
tunnel-group TUN-RA-SPLIT type remote-access
tunnel-group TUN-RA-SPLIT general-attributes
default-group-policy CO-C2S
address-pool CO-C2S-VPOOL
tunnel-group TUN-RA-SPLIT ipsec-attributes
pre-shared-key *********
username ******* password ******** priv 1
crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
crypto dynamic-map dynmap 10 set transform-set 3DES
crypto map Outside_Map 500 ipsec-isakmp dynamic dynmap
crypto isakmp identify address
crypto isakmp enable outside
crypto isakmp policy 100
authentication pre-share
encr 3des
hash sha
crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
crypto dynamic-map dynmap 10 set transform-set 3DES
crypto map Outside_Map 500 ipsec-isakmp dynamic dynmap
crypto map vpn interface outside
crypto isakmp identify address
crypto isakmp enable outside
crypto isakmp policy 100
authentication pre-share
encr 3des
hash sha
group 1
lifetime 3600 -
Site to Site tunnel: ESP request discarded
Hello. I've got a site to site tunnel configured in an ASA-5540 (8.3) and at first working fine. After several hours, the tunnel is disconnected and I this log appear without stopping:
%ASA-7-710006: ESP request discarded from "tunnel IP peer" to outside_int:"my tunnel IP"
I can't figure out why the tunnel stop working and the meaning of this message. The explanation in Cisco documents does't fix to me.
Thanks.Hi,
At HQ ASA atleast the NAT0 configuration is wrong
You have configured this
nat (inside) 5 access-list inside_nat0_outbound
This isnt NAT0 however. It would be configured with ID 5 if you had a corresponding "global" commands using ID 5 also. It would be a Dynamic Policy NAT/PAT.
The NAT0 configurations should use the ID 0
If an existing NAT0 "nat" statement/configuration already exists then you would use the existing ACL to define the traffic that doesnt need NAT
So your configuration should probably be this
nat (inside) 0 access-list inside_nat0_outbound
I can't see a different in the actual L2L VPN configurations though there are some configurations that are not visible that might affect connectivity BUT the above mentioned NAT0 configurations is clearly a problem.
Hope this helps
Please remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni -
ASA-7-710005: UDP request discarded
Hi All,
Hope you are doing good,
Continously I am getting below error log.
Dec 07 2013 11:30:02: %ASA-7-710005: UDP request discarded from 10.109.6.1/67 to WTBB:255.255.255.255/68
Dec 07 2013 11:24:00: %ASA-7-710005: UDP request discarded from 0.0.0.0/68 to WTBB:255.255.255.255/67
Kindly let me know the rean for such errors and how rectify the same,
Attaching the configuration file for your reference.
Regards / Ramesh MThe easiest way to do this is to set the logging level for these messages to a higher level than what you are logging. For example. You are currently logging debug (which is why your are seeing this message). If you log informational messages, you will not see this message.
Another option is to create a custom logging list, But depending on what and how much you want to log, this might not be a very good option.
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/monitor_syslog.html
Please remember to rate and select a correct answer -
UDP request discarded from 192.168.52.7/7765 to inside:255.255.255.255/7765
Hi Everyone.
On My Home ASA i checked the logs it has few logs of
Apr 16 2013 21:36:39: %ASA-7-710005: UDP request discarded from 192.168.52.7/7765 to inside:255.255.255.255/7765
where 192.168.52.7 is my PC IP.
Need to know why this message is showing up in ASA logs.
Thanks
MAheshEither way this sounds like an app not behaving correctly,
why would you want to broadcast this traffic , if you know what I mean
Try to close the applications running on your PC until you check that the traffic disappears then you will be able to determine.
In fact let's make it better ( the way we should do this is next )
Use the powerful netstat
netstat -b
netstat - ano
Then look for the process ID side each connection
Finaly go to your PC Star task manager /Services and match the PID
Regards
Remember to rate all of the helpful posts -
DPC3825 / CAN OPEN PORT 3306 BUT NOT OTHERS
I am trying to open port 80, 3306, 30000, and 30001 .... I did everything properly, I have a static IP address, I am hooked directly to my cisco router, but when I go to this website http://www.whatsmyip.org/port-scanner/ and scan to see if my ports are open, only port 3306 shows that is open, all the other ports time out... Please help me.
Hi Bertrude,
The DPC3825 is an internet service provider (ISP) supported product. You will need to contact them or your technology reseller from where you purchased the device to assist you with your question. -
Port 3306 | 7869...why so difficult!
I develop locally and access my server remotely...
I have a WRT54G Wireless Router and am connected to the internet successfully.
However, I cannot get to my MySQL server remotely when going through the wireless router. The server runs on port 3306 of the mysql server.
In addition I debug locally with port 7869, which cannot be accessed as well now.
Can anyone provide any guidance...tried to understand the port triggering and forwarding, but completely got lost.
Why is this so strange, wierd and complex to get accomplished?
Appreciate the guidance!Do you mean the Internet server or my local PC internet connection? I don't believe either of them have a static IP. Although my mysql server does have a constant IP that my domain is attached to?
I have not forwarded any ports, not really sure what the heck that is doing.
So if I need to be able to access 3306 on a remote mysql server, I need to forward 3306 to my IP address?
Appreciate the guidance!
Message Edited by ndorfnz on 08-24-2006 04:08 PM -
I can't get any access to my remote MySQL databases via Port 3306. I'm at a lost as to what to look at. I installed the latest MySQL and have MySQL Administrator working OK. I've used Tinkertool to look at the directories and have /var/mysql/mysql.sock correct (I believe). I've looked at /tmp/mysql.sock and it aliases to /var/mysql/mysql.sock. About a week ago I was able to use Navicat to access remote MySQL databases fine. The only think I can think of is that MAMP may have corrupted something.
I have the same setup and settings on my PC with regards to Navicat and can access all my remote MySQL databases.
TIA
MacBook Pro Mac OS X (10.4)Did you grant access to the user to connect from the host you are using? Probably your user can only access from localhost. To see if this the case connect to the server and then do this:
1- use mysql;
2- select host, user from user;
You will probably get something like this:
----------------+------
| host | user |
----------------+------
| computername.local | |
| computername.local | root |
| localhost | |
| localhost | root |
----------------+------
Hope this helps. -
LWAPP Discovery request - discarded ?
Greetings all,
I'm starting to grow a huge headache over a WLC-implementation (4402-12). From my point of view, the controller seems to be configured correctly and the DHCP-scope has been set up with the correct pointers as well as as the DNS-record, all pointing towards the AP-Manager i/f (tagged vlan20 on port 1, mgmt untagged) - still, no access-points will associate. The AP is pingable from the controller. A debug of lwapp events and details shows the following;
Sat Jan 7 19:36:17 2006: Received a message from AP of length 97 on inteface = 1
Sat Jan 7 19:36:17 2006: Entered spamGetLCBFromMac file spam_lrad.c line 433**
Sat Jan 7 19:36:17 2006: Received LWAPP DISCOVERY REQUEST from AP 00:0b:85:5a:bd:50 to ff:ff:ff:ff:ff:ff on port '1'
Sat Jan 7 19:36:17 2006: Discarding L3 Mode LWAPP DISCOVERY REQUEST on intf '1', vlan = '20', Management vlan = '0'.
Anyone with a clue regarding what might be causing this? I'm also a little confused regarding the destaddr (bcast) since the AP should've received the ucast address of the controller. We have to handover this system to the cust. fairly soon .. :-)
WLC Version: 3.2.78.0
TIA & Best regards,
/MYou need to use the Management Interface for LWAPP controller discovery. That's what the WLC expects. So when it sees an LWAPP Discovery Request coming in on another interface, it discards its.
In L3 LWAPP mode, the AP tries to find a WLC using IP subnet broadcast, over the air provisioning (OTAP), DHCP Option 43, DNS, and WLC IP addresses stored in memory. It will always use ALL of these techniques. That's why you're seeing the broadcast. From the LWAPP Discovery Responses it selects a controller to join.
Now, you would've seen it join in L2 mode because the AP does an Ethernet "broadcast" to find the WLC. Hence, the mgmt interface sees the LWAPP Discovery, and responds with an Ethernet frame. At L2 mode, all LWAPP is Ethernet encapsulated as opposed to IP encapsulated. When you switched back to L3 mode, the AP remembers the management IP address of the WLC from the L2 join and uses that. That's why it worked after switching L3-->L2-->L3.
Hope this helps. -
I am using VS 2013. IIS 8.0 Express and Azure .NET SDK v2.2
With a simple WebAPI template project I am able to repro this. When I locally debug the project in the azure compute emulator, it starts up the web page in https://127.0.0.1. However, in the request, the URI comes up with port 444.
Is there any known fix / workaround for this bug?
I could find similar issues for others at following pages but their workarounds don't work for me. Nothing in Request object or Request.RequestContext.HttpContext.Request object has the right URL. For e.g. if I try to open https://127.0.0.1:444/,
I get "page not found" error.
http://stackoverflow.com/questions/21062617/wrong-port-number-in-mvc-4-windows-azure-request-url
http://stackoverflow.com/questions/15163670/request-url-has-wrong-port-information
Thanks!After reading through this, I think this might be by design. The request is associated with DIP rather than VIP since it is
just been forwarded from the Load balancer.
However, this would still mean that I need to keep 443 unused for my service to function normally. My service redirect users to live login page and it has to provide the VIP domainname port as redirect url in order to get the request.
During local debugging, requests to url:port provided in Request.Url doesn't work. Overall this azure local debugging setup still is a mess.
Let me know if there is any other workaround/fix. -
SipCilentConnection port in Request-URI
Hi All,
I want to register my J2ME based VoIP application (its using JSR180) to an IMS network.
P-CSCF for my IMS core network is listening on port 4060.
I am using GoSIP sample application (this is bundled with Java Wireless Toolkit). Some code snippet of my register method goes like this :
*String proxyAddress = "pcscs.mydomain.com";*
*String domainRealm = "mydomain.com";*
*String myName = "shiv";*
*String myIP = "172.21.60.100"*
*scc = (SipClientConnection)Connector.open("sip:" + proxyAddress + ":4060"); *// MARK 1**
*//scc = (SipClientConnection)Connector.open("sip:" + proxyAddress); *// MARK 2**
*scc.setListener(listener);*
*scc.initRequest("REGISTER", scn);*
*//scc.setRequestURI("sip:"+domainRealm); *//MARK 3**
*String myContact = "<sip:" + myName + "@" + scn.getLocalAddress() + ":" + scn.getLocalPort() + ">";*
*String srvAddr = "\"" + myDisplayName + "\"" + "<sip:" + myName + "@" + domainRealm + ":" + scn.getLocalPort()">";*
*scc.setHeader("Route", "<sip:pcscs.mydomain.com:4060>");*
*scc.setHeader("Contact",myContact)*
*scc.setHeader("To", srvAddr);*
*scc.setHeader("From", srvAddr);*
*scc.setHeader("Content-Length", "0");*
*scc.setHeader("Max-Forwards", "20");*
*scc.send();*
P-CSCF is listening at port 4060 and when I use MARK 1 and comment MARK 2 and MARK 3 , following REGISTER request is generated and send to PCSCF at port 4060->
REGISTER sip:mydomain.com:4060 SIP/2.0
Call-ID: [email protected]
CSeq: 1 REGISTER
Via: SIP/2.0/UDP 172.21.60.100:9000;branch=z9hG4bKcd031d97c9093e29b6101d97c2cb344c
Route: <sip:pcscf.mydomain.com:4060>
Contact: <sip:[email protected]:9000>
To: "Shiv" <sip:[email protected]:9000>
From: "Shiv" <sip:[email protected]:9000>;tag=2059532475
Max-Forwards: 20
Content-Length: 0
but I want following REGISTER Message to be sent to PCSCF at port 4060 (without port 4060 in Request-URI) ->
REGISTER sip:mydomain.com SIP/2.0
Call-ID: [email protected]
CSeq: 1 REGISTER
Via: SIP/2.0/UDP 172.21.60.100:9000;branch=z9hG4bKcd031d97c9093e29b6101d97c2cb344c
Route: <sip:pcscf.mydomain.com:4060>
Contact: <sip:[email protected]:9000>
To: "Shiv" <sip:[email protected]:9000>
From: "Shiv" <sip:[email protected]:9000>;tag=2059532475
Max-Forwards: 20
Content-Length: 0
If I try to comment MARK 1 and uncomment MARK 2, then it send the above message to default port ie 5060 but I want to send the above message to port 4060 without port 4060 in Request-URI.
Any help is highly appreciated. Please let me know if you do not understand the problem.
Regards,
ShivAfter reading through this, I think this might be by design. The request is associated with DIP rather than VIP since it is
just been forwarded from the Load balancer.
However, this would still mean that I need to keep 443 unused for my service to function normally. My service redirect users to live login page and it has to provide the VIP domainname port as redirect url in order to get the request.
During local debugging, requests to url:port provided in Request.Url doesn't work. Overall this azure local debugging setup still is a mess.
Let me know if there is any other workaround/fix. -
EPrint Portal Feature Request - Discarded Messages Email Address
When a user has the ePrint Center site configured to only allow printing from allowed email addresses, the site displays emails that have been discarded because they are not on the approved sender list.
Feature Request:
Please consider changing the listing of discarded messages to include the sender's email address in addition to the subject you already show. Even better, have an option to click on the email address to add it to the approved senders list.
While one might wonder how you wouldn't know the sender's address, in my case, my wife would send recipes from a recipe site and they would be blocked. To get around this (other than turning off the address list feature), we can send them first to our own email address to find the sending email but what I mentioned would simplify things. Users' technology patience can vary and while I am quite patient for the sake of technology and gadgetry my wife is less patient which, in this case, led to her abandoning the feature.Good news.
To the top right is a link that says View Job History.
Click on this link and it will show the e-mail address.
I confirmed this by logging into my eprintcenter.com account, changing to allowed senders only and then sent an e-mail from a blocked e-mail address.
The short summary did not show the e-mail address, but the full history did show the specific e-mail address.
You can then copy and paste this e-mail address into your list.
Additionally, changing from allowed to everyone and then back will re-add all recent e-mail addresses that successfully printed though it won't add anything that hasn't recently printed.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
How to trace IP address ports and request comming to network interfaces
Hi all,
I am using Solaris IP filter. I need to check the requests that is comming to a patiquler interfaces.
Is there any possibilities to get the IP address: Port, weather the request is Deny from the server etc....
Thanks.
VirajLian,
Did you find a solution?? If still looking, talk to Triometric, they can monitor and log this, a side effect of performance monitoring.
Have fun -
Listen on one port, service request on multiple servers
we are migrating off oc4j to Weblogic 10.3.
One of the things that we really really liked about oc4j was the ability to distribute our applications across multiple JVMs, but refer to any of the apps with the same hostname and port; this meant that we could change the distribution of the applications over the JVMs and not touch the URLs used to access those applications. We would do this to isolate troublesome apps from other ones, and to keep JVM size reasonable.
With WebLogic, our understanding is that only one managed server can be accessed on a given host/port, and a managed server is one JVM. Does this mean that we will need to either put all our apps into one JVM, or else change URLs as the we move apps from one managed server to another?
Edited by: user8652010 on Feb 10, 2011 1:31 PM1 yes, the dhcp server who's scope is full will not do a dhcp
'offer'
2 dhcp that answers fastest with a 'offer' will win. A delay is configurable (but changes nothing
about the root scenario were the fastest will win)
Note that if the scopes overlap on the servers, they might not lease out all the addresses in the scope.
I would enlarge the scope as you will want to fence against unavailability of one of the servers (or a network connection for that matter). you currently have more addresses leased out than any set of two of your servers can offer.
MCP/MCSA/MCTS/MCITP
Maybe you are looking for
-
Must import all photos every time
I recently updated my iPhoto 5 with whatever the most current downloadable update was, i believe its 5.0.4. Ever since this, i cannot choose not to import images that are already in the iPhoto library and also still on my camera's memory. It it makin
-
Authorization/Permissions in CRM
Hi all, I am 100% sure that someone of you can help me;). I am using CRM in the portal and now I have to create different permission roles. In my CRM we have all different cities from a country but the user should only see the cities which belong to
-
Anyone have an easy way to hide an image when clicked?
Hi, I have an image where I need each text box/arrow to delete once clicked. Surely there is an easier way than creating millions of frames? Is it possible to do it with a button? The person using the animation needs to click the right ones that woul
-
Como puedo sincronizar mi ipad en otro equipo sin que me pida que borre todos los contenidos que tengo?
-
What are Ip ranges or domains Skype use to connect...
Hi, Please let me know the IP ranges or the domain Skype use to connect to server. I have an ISA firewall and I want to deny any connections except Skype. Anyone knows, please help me. Thanks