Asha 503 voip accounts not registering on 3G & not...

Hi all.
I had some trouble to find the proper Forum area for this issue. I hope this is the right place.
Here is the description of the issue:
    [1]Before inserting any SIM into Asha 503:
    [1.1]Through Wi-Fi, mobile registers and makes voip calls, both using encryption and not using encryption;
    [2]After inserting Operator SIM Card (Vodafone)
    [2.1]Accounts (both using and not using encryption) do not register via 3G (even though the sim card allows that - I use same card in other devices);
    [2.2]WiFi connection doesn't register encrypted accounts any more. Tried removing SIM card and restart phone but looks like the "feature" got permanently damaged
I did also try to reinstall firmware but issues remain (meaning that something is being left there from Operator SIM). Anyhow, I should be able to insert a SIM in the phone, otherwise it is not a phone right?
Further info: Previously I have been testing an Asha 311:
    [1]Registers and calls through 3G and WiFi (both using or not using encryption);
    [2] Has an issue with Encrypted sip accounts- when looses WiFi and comes back to same WiFi network, is not able to re-register (this problem doesn't affect sip accounts which are not encrypted).
    [2.1] This problem is not related to SIM - After reinstaling firmware, the symptoms remain.
NOTE: I quit from trying to solve this problem - that is why I bought the 503 .
If anybody as a clue how to help solving Asha's 503 issue, I would be truly grateful and happy.
Dinis
PS In the past I came accross a problem in Asha 311 that was returning error when some apps were trying to access to internet and the solution was this:
http://developer.nokia.com/Community...ries_40_pho​nes
I am not sure if this would be the same kind of problem occurring now in the Asha 503 (however, Asha503 doesn't seem to have same kind of settings as in Ash 311)

Out of the blue after a few restarts, Asha 503 started to work with no problems when connection is WiFi (both encrypted and not encrypted accounts)*.
When connection is 3G it doesn't work at all (it is the same if account was created via UI or though provisioning).
So, the updated Status is:
Asha 503 - voip over 3G not working
Accounts (both using and not using encryption) do not register via 3G (even though the sim card allows that - I use same card in other devices);
Experienced only once - after testing several times turning on and off WiFi to force 3G, did not register via WiFi any of the accounts - had to restart the device. But this happened only once. Normally there are no issues registering through WiFi.
Asha 311j - issues reregistering encrypted accounts when mobile leaves and comes back to WiFi
Registers and calls through 3G and WiFi (both using or not using encryption);
Has an issue with Encrypted sip accounts- when looses WiFi and comes back to same WiFi network, it is not able to re-register (this problem doesn't affect sip accounts which are not encrypted).
This problem is not related to SIM - After reinstaling firmware, and not inserting SIM card, the symptoms remain.
*the unique difference from this morning was that I had removed and inserted again the SIM card - after I had changed some mobile data settings via provisioning. but in the morning was not working.
If anyone has any idea on how to properly  solve this, would help me loads.
Cheers all

Similar Messages

  • Need help in setting up PSTN to VOIP gateway with only one VOIP account.

    Hi!
    I am having hard time configuring SPA 3102 for # 3 and # 4 in following requirement list. I have only one VOIP account and my provider does not support simultaneous registrations even on different port. So I want to setup gateway without PSTN line being registered, so only Line 1 is registered with a VSP.
    1. POT terminal can dial out using PSTN or VOIP based on dialplan. Done!
    2. POT terminal can receive call from VOIP. Done!
    3. If a call is received at PSTN line then it should be dealt as gateway call if from particular number, otherwise it is sent to POT Terminal.
    4. If the call is not attended thru POT Terminal then it should be redirected to a particular number using VOIP after certain number of rings.
    Regards,
    Babar.

    #3
    i think that it is not possible,
    - the default bahaviour of the SPA3102 is to recieve the call from the PSTN line, forward it to the phone connected to the FXS port.
    - if there is no answer on the FXS it is then forwarded to a certain number via voip or given a second dial tone.
    #4
    This is functioning ans is the default scenario.,
     register the PSTN line the same as the Line 1.
    set the register to " NO"
    make call without register to "NO"
    ans call without regsiter to "NO"
    - if you need to forward that to a voip number of your choice
    set the PSTN To VOIP dial plan to 2 and change the dial plan on the PSTN line to S0 < : target phone number >

  • Acrobat will not start-up and mac osx and will not register

    Acrobat is installed on my Mac Mini, but will not allow me to register with Adobe. Also, the same Acrobat 8 pro will not operate on my MacBook pro because it is not registered and does not recognize my serial# etc. How can I call someone at Adobe? This product is worthless to me, and I have tried everything.

    Hold down the option key while starting your iMac
    You should see a screen with some imagines of hard drives appear.
    Press the eject key to eject the disk, then select your boot partition (likely named "Macintosh HD") and hit the return key.
    If you still hear the three beeps, the computer may be unable to access its system memory. Preform the resets detailed in these articles:
    https://support.apple.com/kb/HT3964
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
    Or try as den.thed suggested if you have recently installed memory into your computer.
    If your boot partition does not appear when you hold down option and "Recovery HD" also doesn't appear, or if it does not allow you to eject the disk, you may be experiencing hardware issues. Try the above resets, and if they don't work, you will need to go to your closest AASP or Apple Retail store for service.
    Good luck.

  • Class not registered - CrystalPrintControl - havent seen an answer

    Hello,
    I'm still working on my issue from this thread Printing Issue - Visual Studio 2008 with Crystal Reports Basic
    I want to thank Ludek for starting me on the right track.
    I've since updated the project to a .NET 4.0 project using Visual Studio 2010.  I've installed the SP1 for VS2010 and installed Crystal Reports 2010 for VS 2010 as well as the Service Pack for that.  I'm not running Crystal Version 13.0.1.220
    I've rewritten the print code to use RAS, that is the PrintOutputController.PrintReport method.
    The change prints on my development machine - although I have not yet gotten to test whether it actually prints to the default tray of the printer setup, which was my original problem.
    The issue now - moving to the client's server, is that I receive the Class not registered error mentioned in the following threads.
    Re: Class not registered - CrystalPrintControl
    Class not registered - CrystalPrintControl
    ReportApplicationServer does not register properly using 32-bit runtime?
    Problem with Crystal Reports for Visual Studio 2010 Production Redist 32 b.
    CrystalPrintControl not registered
    There does not seem to be a resolution other than this solution provided by a user crystaladvice:
    http://www.crystaladvice.com/crystalreports/fix-class-not-registered-crystalprintcontrol
    Unfortunatly I am receiving an error with regards to the attempt to regsvr32 the printcontrol.dll.
    It seems this is a problem happening to more than one person - so I imagine it's an issue related to installing the Crystal runtimes for a 64 bit machine on Windows 2008 Server.  I know Ludek mentioned he would test it in this thread
    CrystalPrintControl not registered
    Ludek mentioned he was going to check the MSI on a clean install.  From what I can see it looks like whatever you install for Crystal Reports for your development machine works fine, but the MSI runtime install has an issue with a 64 bit 2008 server.
    In the thread mentioned above Ludek had not yet posted the results, just wondering if this is an outstanding issue.
    The current project we are working on is in a standstill - in the meantime I'll explore issues with not being able to regsvr32 the printcontroll.dll.
    Thanks for any help.

    Hi K,
    Most of those posts are for 32 bit deployments so they don't count... Including regsvr32.exe, there are 2 versions, one in
    C:\Windows\SysWOW64 for 32 bit COM dll's and and another one in C:\Windows\System32 for 64 bit dll's, I think.... Confusing why MS did not rename their various 64 bit versions to *64.exe...
    Also, please clarify, you said: "I'm not running Crystal Version 13.0.1.220" why not? You are using the SP 1 patch to build your app but using the 99 build ( SP 0 ) to deploy? make sure both are the same version.
    We have found a few missing dependencies in the both the 32 and 64 bit MSI's and SP 2 should have the ones that have been reported.
    A few issues here, Run Process Monitor on your DEV PC. But first, set your project to x64 Release Mode. And rebuild it...
    Then from Explorer go to the \bin\Release folder and double click your EXE. It is now running in pure 64 bit mode, as you know the .NET IDE is 32 bit ONLY, running in 64 bit debug mode in .NET is confusing, you'll see both 32 and 64 bit runtime loading.
    Do you get the same error? If yes then the Printer Driver you are using, does it support or does it have a 64 Driver available? And have you installed it and done a test app, no CR components, to verify it does actually support 64 bit applications?
    Process Monitor will verify all parts being used....
    So if the above works then it likely is either the dependencies for printing in 64 bit are not installed on the deployment PC or CR 64 MSI is missing something which Process Monitor can verify....
    Don

  • TS3274 I have a few games that I keep getting a message that I cannot do something stating that I am not registered.  I am not sure what they are talking about.

    I have a few games that I just moved over to my Ipad 3 but it will not allow me to get into the social part.  It keeps telling me that I
    have not registered yet.  Not sure what they mean or how to fix it.

    Are you registered with the App Store?

  • Regarding iMessage.  Was working fine but now it says the recipient is not registered. So it will not send the message.  But the person is registered.  Could send them a message yesterday.

    iMessage working yesterday.  Now it says the recipient is not registered and will not deliver message.  But they are registered.  Any suggestions?

    OK.  Going to accept for now that it is a server problem.  Hate waiting though. Grrrr.

  • Protocol handlers not registered

    JFW
    In some cases the protocol handlers will not be registered...we did multiple installations...no success...we tried to post register some dlls...no success...
    Appreciate any hint
    Andreas
    a little more....
    Analyzed the logs a little deeper there is a difference between working and non working installations...some error conditions occurring:
    INFO  protocol handlers not registered protocol handlers not registered protocol handlers not registered protocol handlers not registered - Setting registry settings
    2012-06-05 09:36:02,897 ERROR protocol handlers not registered protocol handlers not registered protocol handlers not registered protocol handlers not registered - Failed to create Software\Policies\Microsoft\Office\14.0\Common\PersonaMenu in 80000001 use64Bit: 0
    2012-06-05 09:36:02,897 ERROR protocol handlers not registered protocol handlers not registered protocol handlers not registered protocol handlers not registered - Failed to create SOFTWARE\Microsoft\Office\Outlook\Call Integration in 80000002 use64Bit: 0
    2012-06-05 09:36:02,897 ERROR protocol handlers not registered protocol handlers not registered protocol handlers not registered protocol handlers not registered - Failed to create CLSID\{8885370D-B33E-44B7-875D-28E403CF9270}\TreatAs in 80000000 use64Bit: 0
    How to avoid this?
    Regards
    Andreas
    Sent from Cisco Technical Support iPad App

    It seems like it's having trouble talking to the registry; perhaps the user authenticated to Windows doesn't have permissions?
    You could check to see if you have access to these Windows Registry keys:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Call Integration
    HKEY_CLASSES_ROOT\CLSID\{8885370D-B33E-44B7-875D-28E403CF9270}
    HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\PersonaMenu
    The error message included isn't really that useful.  Maybe if you can attach the entire logfile to this thread we can dig into it more.

  • I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to iCloud pops- up constantly. My iCloud account is registered with an old email and password. I do not remember the

    I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to ICloud pops- up constantly. My ICloud account is registered with an old email address and password. I do not remember the password to my ICloud account, and ID address that my ICloud account is registered under is an old email adress which is deleted right now (the old mail account is deleted). I don’t have a rescue email adress and I don’t know the answers to the security questions, so I have no way of changing the ICloud password. A message asking me to sign in to ICloud pops up constantly, but I always just hit cancel. However, now I am unable to access Find My IPad. How do I get my ICloud account changed and registered to be under my current Apple ID (email) and password? It is possible to set the device as New Ipad?

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • Hi there I lost my password for my original iTunes account I can't recover it because the email address it is registered under is not longer valid How can I access my old account?

    Hi there.
    I did a factory restore and then restored it with iCloud back-up. I have been using lots of Apple products and i have used three different email adresses. Almost all apps restored perfectly but everytime i try to play a song in the Music app, i asks me for a Apple-ID i had no idea i have used.
    Hence:
    I lost my password for my original iTunes account
    I can't recover it because the email address it is registered under is not longer valid
    How can I access my old account?
    Can't find a place to change the email address to my new one without the password which I no longer remember.
    There is no way to just erase Apple-ID's on my device either.
    What to do? Should i ju give up and start from scratch and delete 2 years of stuf?
    Cheers!

    If you can remember the answers to the security questions when you set up that account - I think that you can reset the password without needing email authentication. You can try it here. Read it and see if it's possible. But if you can't remember the answers to the questions it will not work.
    http://support.apple.com/kb/ht1911

  • My Photoshop Elements 11 does not register on my Adobe account so I can not move it from one computer to another.

    I have 11 on my old computer (windows 7). I can not register this product from the help-menu (menu item "register").
    What has happened so far is that the menu item changed from "register" to "continue register" or similar, and instead of having to log in to the Adobe account, I am sent directly to the account.
    If I could get this registered properly this way, I would know the serial number. I do not find the box or email after the last moves we have done, and this is my last resort to retrieve the serial number.
    Any suggestions to why I can not register or any other way of retrieveing the serial number of the fully operational version 11 on my old computer (so I can write it in the installation set-up information box for 11 on this new computer (windows 8)??!

    Hello cheeseman2014,
    in addition to Keith's hint, you can get your general infos about your Adobe Account (if you did your registration) there:
    https://www.adobe.com/account.html. To find your serial number Adobe offers this:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    Good luck!
    Hans-Günter

  • How can I get the serial number for CS6 - I did not register it on my adobe account and I don't have the invoice/email from Aug 2012 nor the box anymore. I need the number to move software to a new computer.

    I am trying to move Indesign CS6 to a new computer.
    To do this I need the serial number of the license.
    It seems I did not register the number on my Adobe account as nothing is there.
    I bought the software in August 2012 - and no longer have the invoice.
    i think we got the software by box but am not sure.
    Please help!

    Hello Karen,
    in this case you should search for Adobe's staff members by writing a personal message. They can often help better than we, we the users like you. Please have a look in the forum to persons with this icon under their avatar:
    Hans-Günter
    P.S.
    Very often Preran works as the "good spirit".

  • Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

    Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

    Sorry, but no help is possible. You can only use the UAE iTunes Store, and Apple can only offer what content they are able to license for sale in that country. You'll have to look elsewhere for content. Whether there are any other download stores able to sell in the UAE I don't know. You may need to purchased CDs and import them into iTunes.
    Regards.

  • How do i merge my accounts.  My music is not appearing in my main email account.  Both computers are registered.

    How do i merge my accounts.  My music is not appearing in my main email account on one pc.  Both computers are registered.
    Both are using Windows 7.

    Hello Stormjib,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes Library issues. Your iTunes media folder may have been move or modified, which would explain why you can only see media in the cloud:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC.  I'm registered and my itunes account/ appleID are all correct and working.

    I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC.  I'm registered and my itunes account/ appleID are all correct and working.

    The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs.  Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12.  A number of slightly different solutions have been reported (though all of a similar nature).
    Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected.  Without this you won't see the AppData folder in C:\Users\username\
    Exit iTunes
    In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Delete the following files:
    CD Info.cidb
    com.apple.iTunes.Gracenote.plist
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If this doesn't work:
    In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
    Exit iTunes
    In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Delete the following file:iTunesPrefs.xml
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
    If this one didn't work:
    Exit iTunes
    Check the following folders:
    C:\Users\username\AppData\Local\Apple Computer\iTunes
    C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
    Delete any copies of the following files:
    CD Info.cidb
    com.apple.iTunes.Gracenote.plist
    iTunesPrefs.xml
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
    Exit iTunes
    In Windows, select Start > Control Panel > Programs and Features.  Find the entry for iTunes, right-click and select Repair.
    When this process has finished, restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself.  If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

  • Account payment does not register

    at end of prepaid account payment process, my credit card payment does not register. Is there some computer setting I should be aware of? This has been happening since the beginning. I just want to pay online or easily without having to drive to a store - and can't do it.

        Hello MGri,
    It's important to be able to process your payments conveniently! Since you've been having this issue since your online account was set up, we need to ensure that your account is set properly for this option. Our PrePay Team is available to ensure your account is set up properly for online payments. You can reach them directly at 888-294-6830. Please let us know if you need anything further.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Logical System Name for Portal

    Hi all, I am busy documenting System Info for a newly installed Portal (EP6) including values such as SID, Sys No, etc. I would like to know if a Portal has a Logical System Name. As far as I know, it does not, but I would like to confirm. Regards Su

  • Installing Windows 7 on 2009 iMac with Radeon 4850 graphics (Guide)

    Howdy (This was originally posted in the iMac forum by me as a reply to a Windows 7 question, but I figured it may be useful here too. This may be adjustable to work on other 2009 series macs, but I make no promises. If anyone has any tips on how to

  • Looking for "Color Matching" in Tiger Printer dialogue box

    Hello, I'm in transition from using Photoshop 7 in Classic to Photoshop CS in Tiger. I built a printer profile in ProfileMaker 5.xx that I would attach to the Printer Dialogue box in Classic under "Color Matching." Thus my prints would pretty much ma

  • In Develop Mode, always Display As Shot White Balance

    When adjusting WB for RAW images in Develop Mode, it would be really useful to have the As Shot WB visible in RH Pane, along side the Custom WB or other adopted WB.

  • Record Sizing Calculation

    First of all, apologies for using he wrong forum. Why isn't there a "Database" forum? I am currently trying to size a number of tables for a client. From dim and distant genetic memory I think that the following worse-case calculations apply: Length