Need help in setting up PSTN to VOIP gateway with only one VOIP account.

Hi!
I am having hard time configuring SPA 3102 for # 3 and # 4 in following requirement list. I have only one VOIP account and my provider does not support simultaneous registrations even on different port. So I want to setup gateway without PSTN line being registered, so only Line 1 is registered with a VSP.
1. POT terminal can dial out using PSTN or VOIP based on dialplan. Done!
2. POT terminal can receive call from VOIP. Done!
3. If a call is received at PSTN line then it should be dealt as gateway call if from particular number, otherwise it is sent to POT Terminal.
4. If the call is not attended thru POT Terminal then it should be redirected to a particular number using VOIP after certain number of rings.
Regards,
Babar.

#3
i think that it is not possible,
- the default bahaviour of the SPA3102 is to recieve the call from the PSTN line, forward it to the phone connected to the FXS port.
- if there is no answer on the FXS it is then forwarded to a certain number via voip or given a second dial tone.
#4
This is functioning ans is the default scenario.,
 register the PSTN line the same as the Line 1.
set the register to " NO"
make call without register to "NO"
ans call without regsiter to "NO"
- if you need to forward that to a voip number of your choice
set the PSTN To VOIP dial plan to 2 and change the dial plan on the PSTN line to S0 < : target phone number >

Similar Messages

  • Need help w/ setting up ports to run a server for America's Army

    Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
    Q: How do I run my own server?
    A: Quick and dirty server info:
    1. Edit RunServer.bat to change the map.
    2. Run RunServer.bat
    Or:
    server.exe LAN MAPNAME.aao (Host a LAN game)
    server.exe global MAPNAME.aao (Host a Public game)
    Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
    There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
    [Engine.GameEngine]
    ServerActors=Andromeda.AndromedaMBS
    [Andromeda.Andromeda]
    GameServerIp=
    Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
    If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
    [Andromeda.AndromedaMBS]
    QueryPort=20025
    Punkbuster user fix correction.
    If [Engine.GameEngine] block has been changed to read as below:
    [Engine.GameEngine]
    ServerActors=IPDrv.AndromedaMBS
    Please add the following block to your INI file:
    [IpDrv.AndromedaMBS]
    QueryPort=20025
    (Last Updated: 2006-04-20)

    Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
    Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

  • I need help in setting up a wireless connection

    I need help in setting up a wireless connection.
    I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
    Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
    Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
    My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
    I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
    Any suggestions would help me.
    Thanks,
    DaisyMay

    NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
    Model: WNDR3400-100NAS | SKU: 1208844
    This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
     4 Read reviews (21)
    Sale: $79.99

  • Downloaded Epsom printer app need help to set printer up on iPad 3

    Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

    It's Epson, not epsom.  Epsom refers to epsom salt (magnesium sulfate).
    ... Anyway, iPads don't have printers directly set up.  You might interface with a printer over a WiFi.  That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
    If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

  • Need help to set up my exsisting paypal account

    need help to set up my exsisting paypal account

    Did you have a look at the document listed here
    http://forums.adobe.com/community/formscentral/payments?view=documents
    Gen

  • HT5312 I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

    I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

     Account Security Team (AST) 
    Check the AppleCare number for your country here:
    http://support.apple.com/kb/HE57
    Call them up, and let them know you would like to be transferred to the Account Security Team.

  • HT2480 I need help syncing my computer outlook email (through Yahoo) with my Iphone. when I delete an email on my computer is it still in my inbox on my phone.  Any help is appreciated.

    I need help syncing my computer outlook email (through Yahoo) with my iphone.  When I delete an email on my computer it is still in my inbox on my phone. Please help.

    Your computer is probably set up to access your Yahoo mail using POP3. POP3 does not synchronize with the server. For full synchronization, you will need to use IMAP instead. See the Yahoo mail help pages for instructions on how to configure your mail client.

  • Needs help to know the different versions of forms with their compatibility

    Needs help to know the different versions of forms with their compatibility with different databases and operating systems.
    Kindly give the details or any suitable link for the same.
    please consider it as on urgent basis.
    regards,
    rajesh

    Rajesh,
    the certification matrix is available on metalink.oracle.com. You need a support contract to access this information.
    Frank

  • Need help activating Advanced Calling 1.0 on Verizon for iphone 6 business account

    I need help activating Advanced Calling 1.0 on Verizon for iphone 6 business account. I was on the phone with Verizon for over an hour and they can't figure out why it's not working. I'm trying to activate the Voice & Data and all I get is a spinning circle but it never actually works. Anyone have any ideas?

    I just pulled this from the Verizon page. Not sure if it applies to you or not, but it could explain part of your problem since you identify this as a business account.
    Q: Who is eligible for Advanced Calling 1.0?
    A: Any Verizon customer with a compatible phone and a postpaid calling plan is eligible. Please note that the following features are currently incompatible with Advanced Calling 1.0: Ringback Tones and Caller Name ID.  Additional incompatible features apply for Business and Government customers.

  • Another "This itunes account is set up to use family sharing with a different icloud account than Apple ID "

    I saw another thread on the matter but thought I would post because the circumstances are different. Here is how it happened.
    I have had an Apple Store account for years and until recently our family has only had our one Mac and my iPhone 4. Thus any purchases we have made on the Apple App Store were made only with this account.
    We recently purchased two iPhone 5S's--one for my wife and one for my daughter. Neither had Apple IDs so first we set up my wife's iPhone and created an Apple ID for her. Next we used the Family Sharing feature to set up an account for our "under age 13" daughter.
    Because I am still waiting for my iPhone 6 Plus to arrive, and because the iPhone 4 cannot upgrade to iOS 8, and because my Apple ID is the only account with any apps that have been purchased in prior years, I set up my wife as the Family Organizer but when I set up her account, I chose the option to "share purchases from a different account" and entered the information for my Apple ID.
    My daughter is able to view my prior purchases on her iPhone, but when my wife tries to view my prior purchases, she receives the message "This iTunes account is set up to use Family Sharing with a different iCloud account than <her Apple ID>."
    I hope Apple is reading this. I would be more than willing to help them on this one as this feature is one of the main reasons I put our family on iPhones.

    I had this problem. I finally figured it out yesterday. Try this:
    On the device that is having trouble seeing purchases, go to Settings>iCloud>Family Sharing> Then tap on the user of the device you are on. Under "Family Purchases" make sure it has the AppleID of the person for that device. Mine originally had my husbands AppleID in there (he is the Organizer), but I changed it to mine. That doesn't make it so that the purchases are under me. The purchases remained under my husband, but my ID had to be in this spot for it to work.
    After that, I closed settings, then I went to Settings>iTunes and App Store> click on the AppleID and Sign Out, even if it has the right AppleID in there. Then Sign In again using the AppleID of the person on that device. Again-- even if it has the right ID in there to start, still sign out and back in.
    See if they show up. If they don't show up still, try doing a restart (hold down power button and home button until it restarts).
    They should show up by then, but if they don't, at that point, try to go into iCloud and Sign Out and back in.
    I think the key is having the right ID in "Family Purchases". I hope this works for you.

  • Need to capture multiple image paths for responsive design when only one will be displayed at a time

    I'm new to CQ and am having enough trouble following the documentation on image components as it is (why is there no master reference for all this?). I have a requirement where we need to capture three versions of an image and put the URLs into three attributes of a tag. The appropriately sized image will be selected via JavaScript based on the browser/device capabilities. I need to know how to capture those images when seemingly only one at a time can be dropped onto the page. Or perhaps there is a more CQ solution to this.

    Hi,
    You need to customize image component. I mean selected image is a asset in the repository and each asset by default has 3 rendtion generated when the image is uploaded in the dam.
    For example when you upload image.jpg file into the DAM, standard workflow is launched and after a while inside the repository (see paths) are created following renditions:
    /content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.140.100.png
    /content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.319.319.png
    /content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.48.48.png
    This process can be customized by changing /etc/workflow/models/dam/update_asset.html workflow and modifing "Thumbnail creation" step by adding in the Process tab -> Arguments field new values for new rendition. So for example if you add there [400,400] new rendition will be created in the path
    /content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.400.400.png
    Next step is to customize jsp for image component. Using path to the drag and dropped image from a component attributes you can easily take all renditions iterating on the /content/dam/project/image/yourimage.jpg/jcr:content/renditions node and then set paths to all renditions in the tag attributes. Then like you wrote using js you can select proper rendition.
    I hope that it hepls you.
    Regards,
    Adam

  • Why can I not set a member attribute when there is only one child below the member?

    Why can I not set a member attribute when there is only one child below the member?The "member attribute" tab on the properties window of App Manager is grayed out. What am I forgetting?TIA,Craig Wahlmeier

    Most likely because Essbase is creating an implicit share relationship between the two members, which is causing the association tab to be grayed out. Tag the parent member with the "Never Share" attribute and see if that fixes the problem.Regards,Jade-----------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • "this itunes account is set up to use family sharing with a different iCloud account"

    I set up an iCloud family. Until now, everyone had their own iCloud account, and we had a separate iTunes ID (not an iCloud e-mail address) that all of our purchases were made under.
    So, I set up that Apple ID as the master account and added everyone's personal iCloud accounts as members.
    Then, I went into iTunes prefs and logged in as my iCloud account.
    When I go to the App store and go to Purchased, it says:
    "this itunes account is set up to use family sharing with a different iCloud account than <my iTunes Apple ID>." Then there is a Learn More link that takes me to my iCloud and shows my family group with the same Apple ID as the organizer.
    Does anyone have any idea what happened to cause it to think that I am not in the same family group?
    Thanks.

    Update...I now notice:
    Going to: App Store>Updates>Purchases:
    1)  The message “This iTunes account is set up to use family sharing with a different iCloud account other than <her iCloud ID>...”  Is now showing up on my iPhone and can no longer see any of my purchases or hers. 
    2) The same message above is now showing on my iPad mini (it didn’t before).  But, I can still see both hers and my purchases on my iPad mini. 
    3) The message "This iTunes account is set up to use family sharing with a different iCloud account other than <my iCloud ID>…” still showing on her iPhone and she still can’t see her or my purchases.
    iTunes Family Sharing still works fine.
    Note: If I Go to Settings>iTunes & App Store then log out of my Apple ID, then go to App Store>Updates>Purchases and log into my Apple ID from there, My purchases show up (not hers). I then toggle between Updates and Purchases and the message pops up and unable to see any purchases, again.  Same thing happens when I do it to her phone except her purchases show up (not mine).
    I emailed this update to Apple...waiting for a reply.

  • NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

    Hello -
    I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
    Here are the network components - someone please tell me how to set this up:
    PC #1 (has wireless card, but I've connected it by ethernet to the router)
    PC #2 (no wireless card; connected via ethernet to router)
    MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
    AIRPORT EXTREME BASE STATION, Model A1143.
    I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
    I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
    ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
    my question is this:
    Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
    Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
    And help anyone can provide will be much appreciated!
    Thanks,
    Em

    from the Airport FAQ #14:
    "Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
    Answer: No. The USB port is for connecting a printer, not for other devices."
    Im assuming other devices include USB modems.
    So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

  • Need help about setting up a JMS sender channel

    I just started to play with PI for a few weeks and I'm trying to setup a simple JMS sender channel to read stuff from a WebSphere MQ.
    I've someone installed JMS adaptor for me, but we never know it is correctly installed or not. First question is "Is there any way we can verify JMS adapter is correctly installed or not?"
    In the Design: integration builder, I've a very defined a very simple data type(src_dt) which is a string and a message type(src_mt) which uses resp_dt. Finally I created a message interface (test_mia_out) that contains src_mt. At this point of time, I don't need message mapping so I didn't configurate this section.
    Then I went to Configuration: Integration builder and created a new communcation channel with the following setting:
    Parameter section:
    Adapter Type: JMS
    Transport Protocol: WebSphereMQ (Non-JMS)  <- if i don't use this option, i can't enter MQ connection detail in the Source section.
    Message Protocol: JMS 1.x
    Adapter Engine: Integration Server
    Source section:
    QueueConnectionFactory Java Class: com.ibm.mq.jms.MQQueueConnectionFactory
    Queue Java Class: com.ibm.mq.jms.MQQueue
    ...MQ connection detail...(IP, Port, Queue Manager, Channel and Queue Name )
    Transport Protocol: TCP/IP  <- this is consists to server side setting
    JMS-Compliant: JMS-Compliant
    Since I only want a very simple working sample, again I didn't change the content in receiver determination, interface determaintion and sender agreement.
    Now when I active this change and I saw the following error in the channel monitor:
    Short Log - Channel has internal error
    Admin Info - Exception: Channel with Status Unknown or Not Registered
    I did stop and start the service, refresh CPA cache and even restart the entire PI server, I always see this message and cannot find any more detail description about what is causing this problem.
    My PI Server version is 7.0 and MQ version is 5.3
    There's very limited resource about how to setup to read MQ message in PI and I'm stuck now. Therefore, I need a help from some experienced people to tell me if I have did something wrong or missed some steps?
    And if possible, could people mind to post a step by step go through how you setup it up?
    Edited by: Robert Fu on Jan 10, 2008 6:51 AM

    Before you use the JMS, you need to deploy some drivers related to specific MQseries, Kindly ensure that proper driver are deployed....
    If you use MQSeries 53x.xxx, you must enter the following JAR files in aii_af_jmsproviderlib.sda.
    com.ibm.mq.jar, com.ibm.mqbind.jar, com.ibm.mqjms.jar, connector.jar (use the JAR file from the J2EE client directory)
    check this link it will give you more inofmration
    http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
    check this to get the condifuration the JMS
    How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    Ref How To Use the Content Conversion Module in JMS Adapter - https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000582377&

Maybe you are looking for