ASM configuration error, mount failed
When running "oracleasm configure", I am getting the following error:
Mounting ASMlib driver filesystem: mount: block device oracleasmfs is write-protected, mounting read-only
mount: cannot mount block device oracleasmfs read-only
Unable to mount ASMlib driver filesystem
[FAILED]
I am using RedHat 4.0 kernel 2.6.9-22 on x86_64 SMP and have downloaded the relevant ASM rpms.
Any ideas?
Message was edited by:
[email protected]
After reading some more documents, I found out that you actually need to partition the harddrive. I probably will partition it using a software like magic partition. This is different than Redhat Linux 9.0 Personal.
Thank you,
Victor
Similar Messages
-
10g Enterprise manager configuration error SEVERE: Failed to unlock all EM-
Hi Dear,
I have oracle 10g2 on windows 2003 server. I am getting this error while configuring OEM. Few days back, I have reorganized my database. Earlier it was working fine.
SEVERE: Failed to unlock all EM-related accounts
dbsnmp and sysman are not locked.
for default profile Password max use limit is unlimited.
command used
emctl stop dbconsole
emca -repos recreate
emca -deconfig dbcontrol db
emca -config dbcontrol db
Thanks lot
Oct 3, 2009 12:23:14 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-config' set to true
Oct 3, 2009 12:23:14 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'UPDATE_EMAIL' set to true
Oct 3, 2009 12:23:14 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'dbcontrol' set to true
Oct 3, 2009 12:23:14 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Oct 3, 2009 12:23:14 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: D:\oracle\product\10.2.0\db_1
Oct 3, 2009 12:23:14 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:23:14 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: D:\oracle\product\10.2.0\db_1
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID value: mfundliv
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: mfundliv Host: mumhoimfdapp.FGI.AD Node: null OH: D:\oracle\product\10.2.0\db_1 isDBC: false
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: mfundliv Host: mumhoimfdapp.FGI.AD Node: null OH: D:\oracle\product\10.2.0\db_1 agentHome: null isCentral: false
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: mfundliv Host: mumhoimfdapp.FGI.AD Node: null OH: D:\oracle\product\10.2.0\db_1 agentHome: null isCentral: false
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user:
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Oct 3, 2009 12:23:18 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Oct 3, 2009 12:23:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: PORT value: 1521
Oct 3, 2009 12:23:29 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Oct 3, 2009 12:23:29 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:23:29 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:23:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: DBSNMP
Oct 3, 2009 12:23:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:23:39 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYSMAN
Oct 3, 2009 12:23:39 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:23:59 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EMAIL_ADDRESS value: [email protected]
Oct 3, 2009 12:24:06 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: MAIL_SERVER_NAME value: MUMHOIEXBAPP03.FGI.AD
Oct 3, 2009 12:24:06 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:24:06 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value:
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value: yes
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LOG_FILE.
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MFUNDLIV
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\MFUNDLIV\emca_2009-10-03_12-23-14-PM.log.
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: DBSNMP
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 3, 2009 12:24:17 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MFUNDLIV
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MFUNDLIV
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: MFUNDLIV
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1688986573
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYSMAN
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: MFUNDLIV
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle\product\10.2.0\db_1\sysman\config\emd.properties to D:\oracle\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle\product\10.2.0\db_1\sysman\config\emd.properties has been copied to D:\oracle\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle\product\10.2.0\db_1\sysman\config\emoms.properties to D:\oracle\product\10.2.0\db_1\sysman\config\emoms.properties.emca.tmp
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle\product\10.2.0\db_1\sysman\config\emoms.properties has been copied to D:\oracle\product\10.2.0\db_1\sysman\config\emoms.properties.emca.tmp
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle\product\10.2.0\db_1\sysman\emd\targets.xml to D:\oracle\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle\product\10.2.0\db_1\sysman\emd\targets.xml has been copied to D:\oracle\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: mfundliv Host: mumhoimfdapp.FGI.AD Node: null OH: D:\oracle\product\10.2.0\db_1 agentHome: null isCentral: false
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: mfundliv Host: mumhoimfdapp.FGI.AD Node: null OH: D:\oracle\product\10.2.0\db_1 isDBC: false
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: mfundliv Host: mumhoimfdapp.FGI.AD Node: null OH: D:\oracle\product\10.2.0\db_1 isDBC: false
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_mfundliv.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_mfundliv.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_mfundliv.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_mfundliv.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to D:\oracle\product\10.2.0\db_1\oui
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to D:\oracle\product\10.2.0\db_1\oui
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [D:\oracle\product\10.2.0\db_1]
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME D:\oracle\product\10.2.0\db_1
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from D:\oracle\product\10.2.0\db_1\sysman\config\emd.properties
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file D:\oracle\product\10.2.0\db_1\install\staticports.ini
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: D:\oracle\product\10.2.0\db_1:mumhoimfdapp.FGI.AD:null:mfundliv:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_mfundliv.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_mfundliv value: 3938
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_mfundliv.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_mfundliv value: 1158
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_mfundliv.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_mfundliv value: 5540
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_mfundliv.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_mfundliv value: 5520
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: mfundliv : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully granted priviliges to dbsnmp.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_NAME.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_ADDR.
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.EMReposConfig updateReposVars
CONFIG: Updating file D:\oracle\product\10.2.0\db_1\sysman\emdrep\config\repository.variables ...
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle\product\10.2.0\db_1\sysman\emdrep\config\repository.variables.emca.util.tmp to D:\oracle\product\10.2.0\db_1\sysman\emdrep\config\repository.variables
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.EMReposConfig updateReposVars
CONFIG: File D:\oracle\product\10.2.0\db_1\sysman\emdrep\config\repository.variables is successfully updated
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: mfundliv, oracleHome: D:\oracle\product\10.2.0\db_1, and user: SYS
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Oct 3, 2009 12:24:18 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Oct 3, 2009 12:24:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: ORA-28007: the password cannot be reused
ORA-06512: at line 1
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-28007: the password cannot be reused
ORA-06512: at line 1
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.unlockAccounts(EMReposConfig.java:566)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:235)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Oct 3, 2009 12:24:19 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Oct 3, 2009 12:24:19 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\MFUNDLIV\emca_2009-10-03_12-23-14-PM.log for more details.
Oct 3, 2009 12:24:19 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:239)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)See the metalink Note:336629.1, which has clearly mentioned the solution.
-
Solaris 10 upgrade fails with "mount failed"
I'm trying to upgrade an aged Ultra 80 to Solaris 10u9 (from Solaris 10u2 or so), so that it can be used for our product testing purposes. After several unsuccessful attempts, I finally freed up enough space on the / filesystem (5.2GB free) by moving /opt to a newly installed second drive.
However, the upgrade now fails with
"Mount failed for either root, swap, or other file system.
Pfinstall failed. Exit stat= java.lang.UNIXProcess@e2892b 2"
At the end of the log file it says
"Checking c0t0d0s0 for an upgradeable Solaris image.
ERROR: Mount failed for either root, swap, or other file system."
I'm stumped. It doesn't say which file system it's having problems with.
Any ideas as to how to troubleshoot this problem, or what the cause might be? At 30 minutes per upgrade attempt, I'd like to know what the cause is rather than pursuing trial and error.
Thanks.Look at your "vfstab" and see if there are any mounts that need a specific driver like a SAN-provided LUN. Comment them out during the upgrade for the upgrade tries to mount everything in your /etc/vfstab and if it doesn't have the driver/software to do it, it will fail...
-
Error- deploymnt fails - ORABPEL-00016 & 05215- Javac compiler config err
Hi,
We are getting the below error randomly when we try to deploy..
ORABPEL-00016
Javac compiler configuration error.
Failed to execute javac compiler on file(s) "/opt/oracle/soa/bpel/domains/default/tmp/.bpel_XXXXXX_1.0_3c2c050b949f081557b49d81a3e5fe35.tmp/BPEL-INF/src/bpel/XXXXXl/BPEL_BIN.java". Exception reported is:
Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "XXXXX" (revision "1.0"): Javac compiler configuration error.
Failed to execute javac compiler on file(s) "/opt/oracle/soa/bpel/domains/default/tmp/.bpel_XXXXXXl_1.0_3c2c050b949f081557b49d81a3e5fe35.tmp/BPEL-INF/src/bpel/XXXXXl/BPEL_BIN.java". Exception reported is:
Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
and a huge stack trace...
Everything in the server.xml seems to be in the path... its getting fixed after a recycle.... we are able to deploy the same BPEL once recycled...
Does any one of you encounter same problem.. Whts the reason why this is occuring?
Thanks,
JayaprakashHi Jp,
The error message : Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
This means that you javac compiler might not be installed or not in the classpath entry. You might want to compile the bpel project using the JDev and then deploy.
Cheers
A -
Error- deployments fails-ORABPEL-00016 & 05215-Javac compiler config err
Hi,
We are getting the below error randomly when we try to deploy..
ORABPEL-00016
Javac compiler configuration error.
Failed to execute javac compiler on file(s) "/opt/oracle/soa/bpel/domains/default/tmp/.bpel_XXXXXX_1.0_3c2c050b949f081557b49d81a3e5fe35.tmp/BPEL-INF/src/bpel/XXXXXl/BPEL_BIN.java". Exception reported is:
Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "XXXXXX" (revision "1.0"): Javac compiler configuration error.
Failed to execute javac compiler on file(s) "/opt/oracle/soa/bpel/domains/default/tmp/.bpel_XXXXXXl_1.0_3c2c050b949f081557b49d81a3e5fe35.tmp/BPEL-INF/src/bpel/XXXXXl/BPEL_BIN.java". Exception reported is:
Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
and a huge stack trace...
Everything in the server.xml seems to be in the path... its getting fixed after a recycle.... we are able to deploy the same BPEL once recycled...
Does any one of you encounter same problem.. Whts the reason why this is occuring?
Thanks,
JayaprakashHi Jp,
The error message : Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
This means that you javac compiler might not be installed or not in the classpath entry. You might want to compile the bpel project using the JDev and then deploy.
Cheers
A -
Creative Cloud Acrobat ERROR: DS001: Failed to mount the disk image
This is very frustrating...I have installed CC app manager and have tried to downlaod and install Acrobat Xpro but get this error instead.
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DS001 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
----------- Payload: Suite Shared Configuration CS7 4.0.0.0 {BD1F3424-B47B-45DD-B000-3571A67B63F6} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Acrobat XI Pro CCM/Adobe CS7/payloads/AdobeSuiteSharedConfiguration4-mul/AdobeSuiteSharedConfiguration4-mul.dmg. Please verify that the disk image is not corrupt.
Have search forums but can't find any thing that deals with this
Help!Have you tried the CC forum. This is a CC issue and not an Acrobat issue. You could also try downloading AA X from http://prodesigntools.com/adobe-acrobat-x-10-pro-reader-suite-direct-download-links-ddl.ht ml.
-
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
NWDI for the 04s preview fails with 'SLD name-server configuration error'
After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan -
Can't get around "mount failed" - "on error" won't do it - help appreciated
Hi
I'm using this syntax to mount a volume, and it works well if the volume can in fact be mounted:
try
mount volume "afp://username:[email protected]/MyDir"
on error
display dialog "blah blah"
end try
BUT, if the volume can't be mounted because the directory specified is incorrect, I a dialog saying "Mount Failed" opens with the only option being 'OK'. Under some other mount failure circumstances this dialog doesn't appear, and the script does eventually time out and disappear all by itself. But if this dialog appears, I have no option other than to manually press OK. It stays open forever. This dialog appears before the script passes the error to the display dialog part, so it prevents the "on error" part of the script from running. This is the only example I know of where 'on error' fails to let the scripter move on and manage the error.
What I would really like to do is to get the 'on error' functionality to actually work properly, because I can determine the PID of the process using Terminal and could then kill it using a shell script if , BUT none of this is possible because the script never gets to the 'on error' state because a real human must press the dialog's OK. I can't seem to use system events to send anything to it because the whole applescript just hangs at this point until the OK is checked.
Does anyone know a workaround? I've tried using a with timeout step around the whole thing but also won't work.
Thanks for any advice you could give me.
Chris.I'm having the same trouble, but for different reasons. I was trying to determine a method for examining all the mounted volumes on my desktop and then detecting which mounted volume came from which network server. There doesn't seem to be any way to determine this via any filesystem metadata or anything. The only solution that I could think of was to build an afp url for each server/volume combination for any given mounted volume I wanted to test and then try mount volume on each url (thinking that the on error handler would trap the errors and then I could branch accordingly). Doesn't work. It's interesting that if you try mount volume afp://validerserver/badvolume, you get the mount failed error before your on error handler kicks in. If you try mount volume afp://badserver/validvolume, the on error handler fields the resulting -35 error. If you try mount volume afp://emptystring, you get a connection failed dialog before the on error handler again. Really annoying.
I filed a bug on this. -
BizTalk Runtime configuration error - "Creation of Adapter FILE Configuration Store entries failed"
Hi,
I am trying to install Biztalk Server 2006 R2 on a Vista Ultimate
edition machine. I completed the installation successfully, and have
configured "Enterprise SSO" and "Group" features. I am getting the
following error while configuring the BizTalk Runtime feature.
"Creation of Adapter FILE Configuration Store entries failed.
The SSO system is currently disabled."
I have already done/tried the following:
1. I tried different settings - Inprocess only, Inprocess and
isolated, each trusted, each with a regular user account and each with
an administrator user account. In all cases I get the same error.
2. I have made the changes suggested here (related to rpc
authentication changes after Windows XP SP2) but it still doesnt
change anything: http://blogs.msdn.com/scottwoo/archive/2004/05/19/135453.aspx
Any suggestions?
Thanks in advance,
AnandI'm having a similar installation error on an XP SP2 box and was getting the same error message (Creation of Adapter FILE Configuration Store entries failed. The SSO system is currently disabled.). I checked and the Enterprise SSO application is not appearing in the list of services, and doing a command line "net start ENTSSO" returns an invalid service error.
So going on the theory that SSO did not install correctly and get registered as a server, I went ahead and uninstalled BizTalk/SSO, blew away BTS/SSO databases, and tried to reinstall (selected all options for install).
After BizTalk installed, I entered a local admin account and chose "Custom" installation. Because the error message pointed at an SSO problem, I tried to apply the SSO configuration ONLY, using the default SSO Administrator/Affiliate Administrator accounts with the default admin account, but it keeps failiing at the same point in the install log when it tries to start SSO (see log below).
[10:30:51 AM Info ConfigHelper] Creating service: ENTSSO, start type: 2, exe: "C:\Program Files\Common Files\Enterprise Single Sign-On\ENTSSO.exe", dependencies: RPCSS,COMSysApp,MSSQLSERVER, account: .\bizservice
[10:30:51 AM Info ConfigHelper] bizservice is a local entity.
[10:30:52 AM Info ConfigHelper] Created service: ENTSSO
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7370) CSSOServerCfg::ConfigureSCP
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7445) NetScheduleJobAdd: nRc = 00000000, dwJobId = 1
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5697) CSSOServerCfg:tartService
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5721) The SSO service is starting.
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5852) ENTER: CSSOServerCfg::WaitServiceState
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is starting (SERVICE_START_PENDING)
[10:30:53 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is not running (SERVICE_STOPPED)
The SSO database does get created, but the SSO Administrators and SSO Affiliate Administrators local groups do not.
So my theory here is that for some reason SSO cannot start, the exception is caught and the app rolls back.
Any ideas? -
Errors in CCDB Stores - Extractor CONFIGURATION (OS COMMAND) failed
Hi Everyone,
We have Solution Manager 7.1 system on our customer landscape. Technical Monitoring scenario is configured on it. As I check the alert inbox on a regular basis, I find the below error quite frequently:
Errors in CCDB Stores - Extractor CONFIGURATION (OS COMMAND) failed with below error log:
"Exception while retrieving E2EStore - Failed to open HW file."
Can anyone let me know why is this error getting generated and how this can be resolved permanently.
Thanks.
Regards,
NidhiHi Nidhi,
Can you try restarting the SAPHOSTAGENT saphostexec -restart
Check its status saphostexec -status
Check its version saphostexec -version
You should have the latest version applied if possible.
The main fix is in saphostagent package, however also disp+work
processes use the access to saposcol and should be
updated as well via the kernel update.
Kind regards,
Roland -
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
Hi,
I am getting Below error in RHEL 6.5
EPM Configurator Error "Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details" while configuring Essbase Server on 64 bit OS using Oracle Database
Any help...?Hi ,
This community is to discuss Oracle Application Server specific issues, you can post this query in the below Hyperion Forms for better response:
Hyperion EPM
[OR]
Oracle Hyperion EPM (MOSC)
[OR]
Hyperion Certification for EPM (MOSC)
Regards,
Prakash. -
Build failed () configure: error: C compiler create executable[SOLVED]
I am a newbie in the forums, i recently installed arch x86_64 and am having a hard time building packages, i did install base-devel , gcc gcc-fortran gcc-obc..........all that stuff i also installed all the base devel stuff...like fakeroot,flex....(all the base devel stuff) but not luck, when i try 'makepkg -s' it still brings this error ---> " configure: error: C compiler cannot create executables" or sometimes --> configure: error: C++ compiler cannot create executables , i googled a bit on possible solutions, i came acroos similar post but the newbie was not using x86_64, i tried reinstalling GCC but to no avail whats the problem?
hereis my makepkg.conf details
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on x86_64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
BUILDENV=(fakeroot !distcc color !ccache)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries in STRIP_DIRS
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
OPTIONS=(strip docs libtool emptydirs zipman purge)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Directories to be searched for the strip option (if strip is specified)
STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
EDIT by bash: use the 'code' tag!
Last edited by bray085 (2011-01-16 16:29:13)yo man sorry about that...as i said am a newbie..but i will be up and running with no time...i have double checked the config, i cant figure anything...i need your arch skills...anywayz here is my config.log details
$ ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-xcb --disable-static
## Platform. ##
hostname = Muruthi
uname -m = x86_64
uname -r = 2.6.33-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:3338: checking for gcc
configure:3354: found /usr/bin/gcc
configure:3365: result: gcc
configure:3594: checking for C compiler version
configure:3603: gcc --version >&5
gcc (GCC) 4.5.2
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3614: $? = 0
configure:3603: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.5.2/configure --prefix=/usr --enable-languages=c,c++,fortran,objc,obj-c++,ada --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-gnu-unique-object --enable-lto --enable-plugin --enable-gold --with-plugin-ld=ld.gold --disable-multilib --disable-libstdcxx-pch --with-system-zlib --with-ppl --with-cloog --with-cloog-include=/usr/include/cloog-ppl --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info
Thread model: posix
gcc version 4.5.2 (GCC)
configure:3614: $? = 0
configure:3603: gcc -V >&5
gcc: '-V' option must have argument
configure:3614: $? = 1
configure:3603: gcc -qversion >&5
gcc: unrecognized option '-qversion'
gcc: no input files
configure:3614: $? = 1
configure:3634: checking whether the C compiler works
configure:3656: gcc -march=x86-64 -mtune=generic -O2 -pipe -Wl,--hash-style=gnu -Wl,--as-needed conftest.c >&5
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/cc1: error while loading shared libraries: libmpfr.so.4: cannot open shared object file: No such file or directory
configure:3660: $? = 1
configure:3698: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cairo"
| #define PACKAGE_TARNAME "cairo"
| #define PACKAGE_VERSION "1.10.2"
| #define PACKAGE_STRING "cairo 1.10.2"
| #define PACKAGE_BUGREPORT "http://bugs.freedesktop.org/enter_bug.cgi?product=cairo"
| #define PACKAGE_URL ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3703: error: in `/home/irong33k/Desktop/src/cairo-1.10.2':
configure:3705: error: C compiler cannot create executables
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe'
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_FONTCONFIG_CFLAGS_set=
ac_cv_env_FONTCONFIG_CFLAGS_value=
ac_cv_env_FONTCONFIG_LIBS_set=
ac_cv_env_FONTCONFIG_LIBS_value=
ac_cv_env_FREETYPE_CFLAGS_set=
ac_cv_env_FREETYPE_CFLAGS_value=
ac_cv_env_FREETYPE_LIBS_set=
ac_cv_env_FREETYPE_LIBS_value=
ac_cv_env_GOBJECT_CFLAGS_set=
ac_cv_env_GOBJECT_CFLAGS_value=
ac_cv_env_GOBJECT_LIBS_set=
ac_cv_env_GOBJECT_LIBS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl,--hash-style=gnu -Wl,--as-needed'
ac_cv_env_LIBRSVG_CFLAGS_set=
ac_cv_env_LIBRSVG_CFLAGS_value=
ac_cv_env_LIBRSVG_LIBS_set=
ac_cv_env_LIBRSVG_LIBS_value=
ac_cv_env_LIBSPECTRE_CFLAGS_set=
ac_cv_env_LIBSPECTRE_CFLAGS_value=
ac_cv_env_LIBSPECTRE_LIBS_set=
ac_cv_env_LIBSPECTRE_LIBS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_POPPLER_CFLAGS_set=
ac_cv_env_POPPLER_CFLAGS_value=
ac_cv_env_POPPLER_LIBS_set=
ac_cv_env_POPPLER_LIBS_value=
ac_cv_env_VALGRIND_CFLAGS_set=
ac_cv_env_VALGRIND_CFLAGS_value=
ac_cv_env_VALGRIND_LIBS_set=
ac_cv_env_VALGRIND_LIBS_value=
ac_cv_env_XMKMF_set=
ac_cv_env_XMKMF_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_directfb_CFLAGS_set=
ac_cv_env_directfb_CFLAGS_value=
ac_cv_env_directfb_LIBS_set=
ac_cv_env_directfb_LIBS_value=
ac_cv_env_drm_CFLAGS_set=
ac_cv_env_drm_CFLAGS_value=
ac_cv_env_drm_LIBS_set=
ac_cv_env_drm_LIBS_value=
ac_cv_env_drm_xr_CFLAGS_set=
ac_cv_env_drm_xr_CFLAGS_value=
ac_cv_env_drm_xr_LIBS_set=
ac_cv_env_drm_xr_LIBS_value=
ac_cv_env_egl_CFLAGS_set=
ac_cv_env_egl_CFLAGS_value=
ac_cv_env_egl_LIBS_set=
ac_cv_env_egl_LIBS_value=
ac_cv_env_gl_CFLAGS_set=
ac_cv_env_gl_CFLAGS_value=
ac_cv_env_gl_LIBS_set=
ac_cv_env_gl_LIBS_value=
ac_cv_env_glib_CFLAGS_set=
ac_cv_env_glib_CFLAGS_value=
ac_cv_env_glib_LIBS_set=
ac_cv_env_glib_LIBS_value=
ac_cv_env_gtk_CFLAGS_set=
ac_cv_env_gtk_CFLAGS_value=
ac_cv_env_gtk_LIBS_set=
ac_cv_env_gtk_LIBS_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_pixman_CFLAGS_set=
ac_cv_env_pixman_CFLAGS_value=
ac_cv_env_pixman_LIBS_set=
ac_cv_env_pixman_LIBS_value=
ac_cv_env_png_CFLAGS_set=
ac_cv_env_png_CFLAGS_value=
ac_cv_env_png_LIBS_set=
ac_cv_env_png_LIBS_value=
ac_cv_env_png_REQUIRES_set=
ac_cv_env_png_REQUIRES_value=
ac_cv_env_qt_CFLAGS_set=
ac_cv_env_qt_CFLAGS_value=
ac_cv_env_qt_LIBS_set=
ac_cv_env_qt_LIBS_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_env_xcb_CFLAGS_set=
ac_cv_env_xcb_CFLAGS_value=
ac_cv_env_xcb_LIBS_set=
ac_cv_env_xcb_LIBS_value=
ac_cv_env_xcb_drm_CFLAGS_set=
ac_cv_env_xcb_drm_CFLAGS_value=
ac_cv_env_xcb_drm_LIBS_set=
ac_cv_env_xcb_drm_LIBS_value=
ac_cv_env_xcb_shm_CFLAGS_set=
ac_cv_env_xcb_shm_CFLAGS_value=
ac_cv_env_xcb_shm_LIBS_set=
ac_cv_env_xcb_shm_LIBS_value=
ac_cv_env_xlib_CFLAGS_set=
ac_cv_env_xlib_CFLAGS_value=
ac_cv_env_xlib_LIBS_set=
ac_cv_env_xlib_LIBS_value=
ac_cv_env_xlib_xcb_CFLAGS_set=
ac_cv_env_xlib_xcb_CFLAGS_value=
ac_cv_env_xlib_xcb_LIBS_set=
ac_cv_env_xlib_xcb_LIBS_value=
ac_cv_env_xlib_xrender_CFLAGS_set=
ac_cv_env_xlib_xrender_CFLAGS_value=
ac_cv_env_xlib_xrender_LIBS_set=
ac_cv_env_xlib_xrender_LIBS_value=
ac_cv_prog_ac_ct_CC=gcc
## Output variables. ##
ACLOCAL=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR=''
AM_BACKSLASH=''
AM_DEFAULT_VERBOSITY=''
AR=''
AS=''
AUTOCONF=''
AUTOHEADER=''
AUTOMAKE=''
AWK=''
BFD_LIBS=''
BUILD_ANY2PPM_FALSE=''
BUILD_ANY2PPM_TRUE=''
BUILD_CXX_FALSE=''
BUILD_CXX_TRUE=''
BUILD_DRM_XR_FALSE=''
BUILD_DRM_XR_TRUE=''
BUILD_PRIVATE_GLEW_FALSE=''
BUILD_PRIVATE_GLEW_TRUE=''
BUILD_SPHINX_FALSE=''
BUILD_SPHINX_TRUE=''
BUILD_XCB_SHM_FALSE=''
BUILD_XCB_SHM_TRUE=''
BUILD_XLIB_XCB_FALSE=''
BUILD_XLIB_XCB_TRUE=''
CAIROBOILERPLATE_LIBS=''
CAIROPERF_LIBS=''
CAIRO_CAN_TEST_PDF_SURFACE_FALSE=''
CAIRO_CAN_TEST_PDF_SURFACE_TRUE=''
CAIRO_CAN_TEST_PS_SURFACE_FALSE=''
CAIRO_CAN_TEST_PS_SURFACE_TRUE=''
CAIRO_CAN_TEST_SVG_SURFACE_FALSE=''
CAIRO_CAN_TEST_SVG_SURFACE_TRUE=''
CAIRO_CAN_TEST_WIN32_PRINTING_SURFACE_FALSE=''
CAIRO_CAN_TEST_WIN32_PRINTING_SURFACE_TRUE=''
CAIRO_CFLAGS=''
CAIRO_HAS_BEOS_SURFACE_FALSE=''
CAIRO_HAS_BEOS_SURFACE_TRUE=''
CAIRO_HAS_DIRECTFB_SURFACE_FALSE=''
CAIRO_HAS_DIRECTFB_SURFACE_TRUE=''
CAIRO_HAS_DL_FALSE=''
CAIRO_HAS_DL_TRUE=''
CAIRO_HAS_DRM_SURFACE_FALSE=''
CAIRO_HAS_DRM_SURFACE_TRUE=''
CAIRO_HAS_DRM_XR_FUNCTIONS_FALSE=''
CAIRO_HAS_DRM_XR_FUNCTIONS_TRUE=''
CAIRO_HAS_EGL_FUNCTIONS_FALSE=''
CAIRO_HAS_EGL_FUNCTIONS_TRUE=''
CAIRO_HAS_FC_FONT_FALSE=''
CAIRO_HAS_FC_FONT_TRUE=''
CAIRO_HAS_FT_FONT_FALSE=''
CAIRO_HAS_FT_FONT_TRUE=''
CAIRO_HAS_GALLIUM_SURFACE_FALSE=''
CAIRO_HAS_GALLIUM_SURFACE_TRUE=''
CAIRO_HAS_GLX_FUNCTIONS_FALSE=''
CAIRO_HAS_GLX_FUNCTIONS_TRUE=''
CAIRO_HAS_GL_SURFACE_FALSE=''
CAIRO_HAS_GL_SURFACE_TRUE=''
CAIRO_HAS_GOBJECT_FUNCTIONS_FALSE=''
CAIRO_HAS_GOBJECT_FUNCTIONS_TRUE=''
CAIRO_HAS_INTERPRETER_FALSE=''
CAIRO_HAS_INTERPRETER_TRUE=''
CAIRO_HAS_LCOV_FALSE=''
CAIRO_HAS_LCOV_TRUE=''
CAIRO_HAS_MULTI_PAGE_SURFACES_FALSE=''
CAIRO_HAS_MULTI_PAGE_SURFACES_TRUE=''
CAIRO_HAS_OS2_SURFACE_FALSE=''
CAIRO_HAS_OS2_SURFACE_TRUE=''
CAIRO_HAS_PDF_SURFACE_FALSE=''
CAIRO_HAS_PDF_SURFACE_TRUE=''
CAIRO_HAS_PNG_FUNCTIONS_FALSE=''
CAIRO_HAS_PNG_FUNCTIONS_TRUE=''
CAIRO_HAS_PS_SURFACE_FALSE=''
CAIRO_HAS_PS_SURFACE_TRUE=''
CAIRO_HAS_PTHREAD_FALSE=''
CAIRO_HAS_PTHREAD_TRUE=''
CAIRO_HAS_QT_SURFACE_FALSE=''
CAIRO_HAS_QT_SURFACE_TRUE=''
CAIRO_HAS_QUARTZ_FONT_FALSE=''
CAIRO_HAS_QUARTZ_FONT_TRUE=''
CAIRO_HAS_QUARTZ_IMAGE_SURFACE_FALSE=''
CAIRO_HAS_QUARTZ_IMAGE_SURFACE_TRUE=''
CAIRO_HAS_QUARTZ_SURFACE_FALSE=''
CAIRO_HAS_QUARTZ_SURFACE_TRUE=''
CAIRO_HAS_SCRIPT_SURFACE_FALSE=''
CAIRO_HAS_SCRIPT_SURFACE_TRUE=''
CAIRO_HAS_SKIA_SURFACE_FALSE=''
CAIRO_HAS_SKIA_SURFACE_TRUE=''
CAIRO_HAS_SPECTRE_FALSE=''
CAIRO_HAS_SPECTRE_TRUE=''
CAIRO_HAS_SVG_SURFACE_FALSE=''
CAIRO_HAS_SVG_SURFACE_TRUE=''
CAIRO_HAS_SYMBOL_LOOKUP_FALSE=''
CAIRO_HAS_SYMBOL_LOOKUP_TRUE=''
CAIRO_HAS_TEE_SURFACE_FALSE=''
CAIRO_HAS_TEE_SURFACE_TRUE=''
CAIRO_HAS_TEST_SURFACES_FALSE=''
CAIRO_HAS_TEST_SURFACES_TRUE=''
CAIRO_HAS_TRACE_FALSE=''
CAIRO_HAS_TRACE_TRUE=''
CAIRO_HAS_VG_SURFACE_FALSE=''
CAIRO_HAS_VG_SURFACE_TRUE=''
CAIRO_HAS_WGL_FUNCTIONS_FALSE=''
CAIRO_HAS_WGL_FUNCTIONS_TRUE=''
CAIRO_HAS_WIN32_FONT_FALSE=''
CAIRO_HAS_WIN32_FONT_TRUE=''
CAIRO_HAS_WIN32_SURFACE_FALSE=''
CAIRO_HAS_WIN32_SURFACE_TRUE=''
CAIRO_HAS_XCB_DRM_FUNCTIONS_FALSE=''
CAIRO_HAS_XCB_DRM_FUNCTIONS_TRUE=''
CAIRO_HAS_XCB_SHM_FUNCTIONS_FALSE=''
CAIRO_HAS_XCB_SHM_FUNCTIONS_TRUE=''
CAIRO_HAS_XCB_SURFACE_FALSE=''
CAIRO_HAS_XCB_SURFACE_TRUE=''
CAIRO_HAS_XLIB_SURFACE_FALSE=''
CAIRO_HAS_XLIB_SURFACE_TRUE=''
CAIRO_HAS_XLIB_XCB_FUNCTIONS_FALSE=''
CAIRO_HAS_XLIB_XCB_FUNCTIONS_TRUE=''
CAIRO_HAS_XLIB_XRENDER_SURFACE_FALSE=''
CAIRO_HAS_XLIB_XRENDER_SURFACE_TRUE=''
CAIRO_HAS_XML_SURFACE_FALSE=''
CAIRO_HAS_XML_SURFACE_TRUE=''
CAIRO_LDFLAGS=''
CAIRO_LIBS=''
CAIRO_LIBTOOL_VERSION_INFO=''
CAIRO_NONPKGCONFIG_CFLAGS=''
CAIRO_NONPKGCONFIG_LIBS=''
CAIRO_RELEASE_STATUS=''
CAIRO_REQUIRES=''
CAIRO_TEST_MODE=''
CAIRO_TEST_UNDEFINED_LDFLAGS=''
CAIRO_VERSION_MAJOR=''
CAIRO_VERSION_MICRO=''
CAIRO_VERSION_MINOR=''
CAIRO_VERSION_SONUM=''
CC='gcc'
CCDEPMODE=''
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe'
CPP=''
CPPFLAGS=''
CROSS_COMPILING_FALSE=''
CROSS_COMPILING_TRUE=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS='-march=x86-64 -mtune=generic -O2 -pipe'
CYGPATH_W=''
DEFS=''
DEPDIR=''
DISABLE_SOME_FLOATING_POINT_FALSE=''
DISABLE_SOME_FLOATING_POINT_TRUE=''
DLLTOOL=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_GTK_DOC_FALSE=''
ENABLE_GTK_DOC_TRUE=''
EXEEXT=''
FGREP=''
FIND=''
FONTCONFIG_CFLAGS=''
FONTCONFIG_LIBS=''
FREETYPE_CFLAGS=''
FREETYPE_CONFIG=''
FREETYPE_LIBS=''
GOBJECT_CFLAGS=''
GOBJECT_LIBS=''
GREP=''
GS=''
GTKDOC_CHECK=''
GTK_DOC_USE_LIBTOOL_FALSE=''
GTK_DOC_USE_LIBTOOL_TRUE=''
HAVE_GTK_FALSE=''
HAVE_GTK_TRUE=''
HAVE_PTHREAD_FALSE=''
HAVE_PTHREAD_TRUE=''
HAVE_REAL_PTHREAD_FALSE=''
HAVE_REAL_PTHREAD_TRUE=''
HAVE_SHM_FALSE=''
HAVE_SHM_TRUE=''
HTML_DIR=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
INSTALL_STRIP_PROGRAM=''
LD=''
LDFLAGS='-Wl,--hash-style=gnu -Wl,--as-needed'
LIBM=''
LIBOBJS=''
LIBRSVG_CFLAGS=''
LIBRSVG_LIBS=''
LIBS=''
LIBSPECTRE_CFLAGS=''
LIBSPECTRE_LIBS=''
LIBTOOL=''
LIPO=''
LN_S=''
LTLIBOBJS=''
LTP=''
LTP_GENHTML=''
MAKEINFO=''
MKDIR_P=''
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OS_WIN32_FALSE=''
OS_WIN32_TRUE=''
OTOOL64=''
OTOOL=''
PACKAGE=''
PACKAGE_BUGREPORT='http://bugs.freedesktop.org/enter_bug.cgi?product=cairo'
PACKAGE_NAME='cairo'
PACKAGE_STRING='cairo 1.10.2'
PACKAGE_TARNAME='cairo'
PACKAGE_URL=''
PACKAGE_VERSION='1.10.2'
PATH_SEPARATOR=':'
PKGCONFIG_REQUIRES=''
PKG_CONFIG=''
POPPLER_CFLAGS=''
POPPLER_LIBS=''
RANLIB=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
SHLIB_EXT=''
SHM_LIBS=''
SHTOOL=''
STRIP=''
VALGRIND_CFLAGS=''
VALGRIND_LIBS=''
VERSION=''
XARGS=''
XMKMF=''
X_CFLAGS=''
X_EXTRA_LIBS=''
X_LIBS=''
X_PRE_LIBS=''
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=''
am__leading_dot=''
am__quote=''
am__tar=''
am__untar=''
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
directfb_CFLAGS=''
directfb_LIBS=''
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
drm_CFLAGS=''
drm_LIBS=''
drm_xr_CFLAGS=''
drm_xr_LIBS=''
dvidir='${docdir}'
egl_CFLAGS=''
egl_LIBS=''
exec_prefix='NONE'
gallium_DIR=''
gl_CFLAGS=''
gl_LIBS=''
glib_CFLAGS=''
glib_LIBS=''
gtk_CFLAGS=''
gtk_LIBS=''
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='/var'
lt_ECHO='echo'
mandir='${datarootdir}/man'
mesa_DIR=''
mkdir_p=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
pixman_CFLAGS=''
pixman_LIBS=''
png_CFLAGS=''
png_LIBS=''
png_REQUIRES=''
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
pthread_CFLAGS=''
pthread_LIBS=''
qt_CFLAGS=''
qt_LIBS=''
real_pthread_CFLAGS=''
real_pthread_LIBS=''
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
shm_LIBS=''
skia_DIR=''
sysconfdir='/etc'
target_alias=''
xcb_CFLAGS=''
xcb_LIBS=''
xcb_drm_CFLAGS=''
xcb_drm_LIBS=''
xcb_shm_CFLAGS=''
xcb_shm_LIBS=''
xlib_CFLAGS=''
xlib_LIBS=''
xlib_xcb_CFLAGS=''
xlib_xcb_LIBS=''
xlib_xrender_CFLAGS=''
xlib_xrender_LIBS=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "cairo"
#define PACKAGE_TARNAME "cairo"
#define PACKAGE_VERSION "1.10.2"
#define PACKAGE_STRING "cairo 1.10.2"
#define PACKAGE_BUGREPORT "http://bugs.freedesktop.org/enter_bug.cgi?product=cairo"
#define PACKAGE_URL ""
configure: exit 77 -
Configure: error: C preprocessor "/lib/cpp" fails
I'm getting an error:
configure: error: C preprocessor "/lib/cpp" fails sanity check
For several things, mainly svn of gaim, gaim-encryption, but I haven't tried others. Any clue what this has to do with?i tried to install sabbu and subtitleeditor with abs/aur, and both stopped at configure.
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
tried to reinstall kernel-headers-2.6.18-3 and gcc-4.1.1-3 ...no luck.
(tried to remove them from cache then reinstall...still got the error msg)
Maybe you are looking for
-
Can I use multiple values for a rollup key on the same Endeca record?
We have a business need to to aggregate our records using different criteria, based on user navigation. We are thinking of using a rollup key with multiple values to help with the aggregation, but we are running into some issues. Here is a made-up xa
-
Problem in mapping Infoobjects in Transfer Rules
Hello Friends, I need your help regarding following issue: I installed ODS named STABILITY STUDY : INSPECTION RESULTS QUANT. DATA (0QM_DS02) from Business Content. The ODS & Update Rules have been installed properly. Few infoproviders had been alrea
-
Facenow app is showing in my setting in my iPhone 4S wid ios 6
-
Importing a CSV file into AD 2012r2
Hi Guys Just wondering if anyone can help, I am a newbie on scripting and finding it really difficult to understand how to import a csv file into AD I have created the CSV file with the following headers, see below but I am unable to write a powershe
-
I am having problems exporting a multipage website as a working pdf. I get a dialogue box stating that there are incorrect parameters. I am using Mac OS 10.5. Any help would be appreciated. Thanks. Carrie