Asset not posting

Hi experts
please solve my problem, i could not post asset on F-90,
Error " finacial yerar 03/2007 not opend"
posting date is " 04-03-2007 "
docu date is same as above
my financial years is 2008
Note just i created company code ,
get points.
Hima

Hi
Check OB52 , which are the fiscal year open for ur company code?Ur Fiscal year is 2007 or 2008?
U can create the asset in 2007 only if that fiscal year and posting period is open in OB52.
Then go to OAAR and open the fiscal year 2007.
Now u can post in both 2007 and 2008
Hope this will solve the issue
Regards
Anup
assign points if useful

Similar Messages

  • Asset explorer- Asset not posted to APC transactions

    Hello,
    In AW01, asset explorer screen,  in the planned values display tab , an asset has directly been posted from MM as goods issue.
    However the Amount say Rs.10000 and its ordinary depreciation say 500 is not getting added to the APC transactions in the above tab of plannned values book depreciation.
    So the APC transactions amount say 50000 and its corresponding planned depr say 2000 is excluding the previous mentioned asset values capitalised (Rs.10000 and Rs.500)
    As a result the related asset reporting shows incorrect asset balances.
    I would like to know why the asset already capitalised does not get reflected in the total value of the APC transactions ?
    Pls help.
    Regards.

    Hi,
    are you sure that the asset was posted from MM as goods issue? Not goods receipt from PO? Did you make the asset, or did you buy the asset?
    OK, if you bought the asset, here is a suggestion you might want to look into.
    Have the invoice verification been done to the PO? Usually, the APC value will be posted when there is a posting to the FI for the asset. And the ordinary depreciation will not be posted automatically. For Rs 500 depreciation, you need to do write-ups to adjust your asset balance.
    Hope this helps.

  • Asset Not Posting In the GL @ Asset Retirement

    Hello All,
    Our client is facing a problem which is as below.
    We have done retirement of an asset the steps done are follows.
    1. ABAON - Sale with revenue with out customer.
    The GL are updated with respect to depreciation area 01 , book dpreciation.
    2.ASKB , periodic processing for the updation of depriciation area 02 - tax dpreciation.
    Only the clearing account is getting updated.
    The loss on sale of asset & revenue from the sale of asset GL are not updated in this case.
    I have checked the configuration in AO90 and GL are perfectly assigned correctly for both the depreciation areas 01 & 02
    Can any one help me in finding why its not getting posted.
    Is there any steps missing in the process.
    Also note depreciation posting for 01 is real time and 02 its manual yearly one. But there is some depreciation posted in earlier year so there is actual loss on sale of asset
    Thanks In Advance
    Arun

    Hi,
    My problem is last year it posted correctly , is there any relation between the posting of depreciation in Tax depreciation Area 02 at the 12th period and this error.
    Should we clear the clearing accout to post into the GL
    Thanks in advance
    Arun R

  • Open asset acctng year in closed FI fiscal year - asset not totally posted

    Hello Friends,
    In January we have closed 2010 in finance but Asset accounting year remained open.
    Now I have an asset with planned depreciation in 2010 which was not posted. Now I can't close asset accounting for 2010.
    I have read about SAP note 29694 and program RACORR20_A in the forum, but I'm not sure about it's consecuences. Can't I just delete the planned depreciation in 2010, close the year and set an unplanned depreciation for the same value in 2011?
    Thanks in advance.
    Juanma.

    Hi Juan
    You have 2 choices, one of which you have identified already
    a. Note 619969 - This will let you post dep in 2010... This will change balance in your FI books
    b.Note 29694 - If you dont wanna post anything in 2010 due to legal issues, then use the program mentioned in the note and this will make Posted dep = Planned Dep
    Advisable is Note 619969 of the two
    br, Ajay M

  • Fixed asset Write up Error. ABZU(Parallel depreciation area 32 is not poste

    Hi Sap Gurus,
          I am running into an error when trying to post a write up via "ABZU". Here is the error message "Parallel depreciation area 32 is not posted". Message no. AA565.
    Diagnosis
    The asset to be posted does not manage parallel depreciation area 32, or transaction type  that you are using is limited to certain depreciation areas, and does not contain depreciation area 32. This is incorrect.
    System Response
    Posting is rejected.
    Procedure
    Check the asset and the transaction type.
    I tried "Limit Transaction Types to Depreciation Areas" in t-code:OAXE for derpeciation area 01 and 32 but still i am getting the same error. I am using ttype:700. When i look into derpeciation tab in asset master record i have depreciation area 32 is there. Is there any configuration piece i am missing. We are using area 32 as IFRS in group which is copy of 01.
    Any help will be appreciate.
    Thanks and Regards,
    Babu

    Hi,
    There are the following reasons:                                                                               
    1) The wrong transaction type is being used.  Please verify that  you are using transaction type in the 700 series for your write-up.     
    2) The transaction type is restricted to certain depreciation areas.   In transaction OAXE the transaction type can be restricted to post  only to certain areas.  If the asset manages a parallel area you  have to extend the posting to include the parallel area.                 
    3) The asset was created before you introduced parallel currencies and  does not manage the parallel area.  In this case, the parallel  area must be created on the asset or the values need to be  transferred to a new asset that manages the parallel area.                       
    4) Transacion types 600 and 601 can only be used for assets that have a  calculation key in their depreciation area that allows no automatic  calculation (for example depr key MANU).  The unplanned transaction types however can be used with assets that  allow automatic calculation.                                                     
    You also need to verify that there are entries in Table ANLB for the  asset in question for the depreciation area. 
    5) Your company code uses parallel currencies (currency types 10-co.code  currency, 50-Index based currency, 30-Group currency...for example).  The assets created in this company code must have the depreciation areas for parallel currencies active. You can only do this in activating the depreciation areas with  parallel currencies for all the asset classes used in this company code.                                                                            
    Check transaction OAYZ to make sure the areas are activated for all  asset classes in the co.code.  If not, you will need to       activate these areas and ensure the asset has all areas assigned.                
    regards Bernhard

  • Asset Fiscal Year End Closing - Depreciation not posted completely in 2010

    Hi Experts,
    I have an issue concerning AA 2010 year end closing, since there is one asset which depreciation in 2010 was not posted completely, meaning that we cannot close 2010 fiscal year.
    This happened because of the following situation:
    Vendor Incoice was posted in 30.12.2010, with a document date 31.03.2010 (meaning that for this asset the depreciation calculation start date was 01.03.2010). Then, in 30.03.2011 someone post the reversal document, with posting date 31.12.2010.
    So for this asset I donu2019t have any depreciation posted in 2011 and no values in depreciation book, for the asset, meaning that even if I change the depreciation calculation start date for 01.01.2011, it will still be necessary to run depreciation in Dec.2010.
    However I cannot run depreciation for this asset for 2010 because it will have impact in 2010 balance sheet, which cannot happen.
    Do you have any ideas to solve this problem?
    Thanks!
    Best regards,
    Andreia Nascimento

    Hi,
    As i have already suggested you for the [SIMILAR THREAD|Re: Asset Fiscal Year Closing not possible], which you have only posted in FI forum, there is no other alternative than running the repeat dep run for FY 2010 for period 12.
    Please do not cross post your questions.
    REgards,
    Srinu

  • Interface   BAPI  can not post to asset

    Dear all
            i met a weird problem.
            we use a interface( bapi)  to make the SAP document, but when  we post document  for the asset ,
    only FI document generated.  the Asset document not generated ,  the value was not posted to the asset.
            if anybody has met this kind of problem?   help .......help.......Thanks a lot !

    Dear
          yes ,we have fill in the transaction type (100 - acquisiton) , and the FI document has been generated
    all the fields are right ! the only problem is  the asset value not updated ,it's that the asset document not generated!
    and it 's not for a particular company code ,for all the company code!
    Best Regards!:)
    Sara xie

  • Parallel depreciation area 04 is not posted.(Assets)

    Hi All,
    I have found below mentioned error at the time of Advance knocking off.(F-54)
    Parallel depreciation area 04 is not posted.
    I have found below mentioned error at the time of Advance knocking off.
    The error message number :AA565
    The Asset to be posted does  not manage parallel depreciation area 04,or transaction type that you are using is limited to certain depreciation areas and does not contain depreciation area 04. This is incorrect.
    Please help out for this issue.
    Thanks and Regards,
    Ram

    Hi Ram
    With regards to the issue, if you have activated the use of parallel currencies, all assets created in this company code must have the depreciation areas for parallel currencies active. You can only do this by activating the depreciation areas with parallel currencies for all the asset classes used in this company code. Check transaction OAYZ to make sure the areas are activated for all asset classes in the co.code . If not, you will need to activate these areas and ensure the asset has
    all areas assigned.
    Another reason why the error message appeared could be the asset was created before you introduced parallel currencies and does not manage the parallel area. In this case, the parallel area must be created on the asset or the values need to be transferred to new asset that manages the parallel area.
    I hope this information helps.
    Best regards
    George

  • You can not post to asset xyz ( investment support measure) ??

    Hi Guru's,
    I am trying to post some spending reclassed to an already capitalized asset. So in order to do this I have reactivated the project, resettled the spending to the asset and now I am trying to finalize the settlement to the asset by using tcode: CJIC... but keep getting this a hard error message:
    You can not post to asset xyz ( investment support measure) .....
    Any idea how I can resolve this ?
    Please help !! Thank You
    Best Regards,
    Yasmeen

    hi,
    it would be better if you write error message number in thread.
    hope you are using im module. if so check the system stastus of appr.request and try to settle to auc.
    check and do revert.
    regards,

  • Planned Dep not posted for retired assets

    Hi ,
    We are running the asset depreication everymonth end, and it was posting without any errors.
    But suddenly we found that some assets which we retired have still not posted the balance depreication and it is still reflecting in Planned Depreication in AW01N for previous months.
    Eg: Asset retired on 29th of a month. Depreciation was not posted for this 29 days. and this balance still lies in planned depreication even after the depreciation run.
    When i try to do a repeat run it gives an error message,
    depreication for Peirod...... already posted.
    As we have already run the depreciation, kindly suggest what best can be done without affecting the depreciation which is posted for other assets which is correct.
    Thanks & Regards
    Sanjay Marathe

    Dear Ramesh,
    Thanks for the update, i have got once more important information on this.
    The problem lies only in one asset.
    When they posted the depreiciation, in the actual run it gave a warning message that
    " The posted depreciation and estimated depreciation are different" .  But as the user was not aware regarding the Rerun and he has posted depreciation for subsequent periods.
    And now it is not allowing to do a rerun for pervious periods.
    Acq date :           9/11/2004
    DOC       :           9/11/2004
    Retirement date : 29/05/2007
    useful life  :          5yrs
    Dep key LINR :     SLM from remaining life to book value zero.
    Depreciation to the day is checked in the Dep Key
    Exp useful life 2 years 161 days as on 31st march 2006
    It was migrated on 1/4/2006 to SAP.
    Points will be awarded.
    Thanks & Regards
    Sanjay Marathe

  • Assets table where We can know Depreciation Posted & Not Posted.

    Dear All,
    We are having Serious Problem In Assets Depreciation.
    Can Anybody Pls let me know the table where we can find Assets , Depreciation Posted & Not Posted as we have to make some Analysis.
    Thanks & Regards,
    Pankaj

    Hello
    go to t093d which will suffice ur requirement
    Regards
    madhav

  • Asset Transfer posting ABT1N

    hI,
    while working with transaction ABT1N Asset transfer posting from existing (comp code) asset to new (comp code) asset with
    Document, posting, asset value date -> this will be the same date 1.1.2011,
    system gives error message" You cannot post to asset in company code 'abcd' fiscal year 2011.
    After that
    I changed the Document, posting, asset value date -> this will be the same date 20.11.2011, system gives error message "
    Account 20900000 does not exist in company code 'abcd'.
    Please resolve the issue both the scenarios.
    Thanks,
    Sahara.

    please search.  the "account does not exist" error has been dealt with previously.

  • Account assignment not possible (Asset not assigned to a business area)

    HI
    While posting an asset acquisition through F-90 by entering Business area, doc.type AA,TT-100,PK-70, i am getting the error messege AA483 - "Account assignment not possible (Asset not assigned to a business area)".
    I have correctly created asset master and assigned Business area and Cost centre.
    And i am not getting any problem in another company code for same asset class.
    Please suggest
    Bhanu Prakash

    Hello
    Assets are assigned to a single business area in their master record. Every posting to an asset balance sheet account is automatically posted to that business area. The business area for an asset is passed on to all line items connected with the asset. Therefore you do not need to make a manual account assignment for a business area at any point.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
    Check the info on the link please
    Reg
    assign points if useful

  • Error message when posting revaluation "deprecation not posted completely"

    Hi Gurus
    When I am trying to post revaluation to an asset, using AR29, I get an error message APERB027 "deprecation not posted completely".
    I have run AFAB for period 01/2010 and the entry in TABA is correct.
    Can any one help me solve this?
    Thanks
    Gil

    Hi
    I am trying to post revaluation for 31.01.2010 (asset was capilized on 01.01.2010)
    I have ran AFAR, and it didn't have any effect

  • Controlling Document not posted upon GRS of PO with account assignt type A

    My company is going to upgrade our SAP ERP system from version 4.6C to ECC5.
    In version 4.6C, when a Purchase Order (PO) is created and assigned to:
    (1) project wbs element
    (2) asset
    Upon GRS, the following accounting documents are normally posted:
    (1) Accounting document
    (2) Profit center doc.
    (3) Spec. purpose ledger
    (4) Asset transaction
    (5) Cost accounting doc.
    Following, if I want to view the Actual Cost line items posted for the project wbs element in mind, I am able to view the details via transaction CJ74.
    However, in ECC5, simulating the same scenario as described earlier, i.e. a Purchase Order (PO) is created and assigned to:
    (1) project wbs element
    (2) asset
    Upon GRS, the following accounting document is NOT posted:
    (1)Cost accounting doc.
    (which in ECC5 is termed Controlling Document)
    As a result, I am unable to track the Actual Cost line item of the wbs element via transaction CJ74.
    This is because in normal instances, a corresponding CO document posted for the FI document posted upon GRS. What I understand is that CJ74, pulls data from CO tables and because CO tables aren't updated, I can't view this statistical cost postings.
    I would appreciate if anyone could advise the following:
    (1) Why this occurs in ECC5
    (2) How to rectify the problem
    Thank you.

    Hello,
    Make sure in OBYC, for key WRX, you have maintained the GL accounts.
    Regards,
    Ravi

Maybe you are looking for