Asset Transaction

Hello,
During settlement from AuC to Main assets, i am getting error message stating "Asset value date is earlier then Capitalisation date", here i know what exactly the problem is but i want to proceed further, how can i make this error message as only warning message and proceed further with settlement?
regards,
radhakrishna

Hi Radhan,
Follow these step:
1. Go to OBA5
2. Enter AA as appl area
3. Select/Add message no. 348
4. Enter your userid
6.Enter W in 'Online' & Save
Do not hesitate to ask for clarifications. Award points for helpful answer.
Regards,
Siva

Similar Messages

  • Problem about creating asset transaction type

    I  created an asset transaction type with AO76 to deal with the  apportionment of asset expenses which was created in the year before yesteryear.But the user demands an account assigned to the transaction type .Then I checked the configuration.It seems t-code AO85 can only realize the relationship between asset classes and accounts.
    So what should I do to realize this? Thanks!

    or if you still want to achieve it. Go for substitution. make the Gl account the substitutable field and then define a rule saying that, if the transaction type is ' ', then the gl account is ' '
    Regards
    anantha

  • Error in Asset Transactions Report in ECC 6

    Hi Friends,
    We have upgraded from ECC 4.7 to ECC 6.0 in Nov 2007.
    In Asset Transactions Report (S_ALR_87012048) the Depreciation column is displaying Zero Values for individual line items after November 2007 (ie for Assets posted after Nov, 07).
    We posted the same to SAP and they are saying that since New Depreciation Calculation has been activated, Depreciation on Individual transactions will not be calculated.
    SAP has quoted the following note:
    As per note 965032 point 4d under the header 'No depreciations ontransactions' which states:-
    .... if you use the new depreciation calculation, the system no longer saves depreciations on transactions in the line items. Exceptions to this rule are - proportional value adjustments in the case of retirements or retirement transfers, since these must continue to be calculated at single transaction level.
    My questions are:
    1.Even after this the report with depreciation values as Zero can be grossly misleading (other reports are showing correct values).  Is it correct?
    2.If what SAP is saying is correct, then How is this New Depreciation calculated? If anybody has an idea, please explain...
    I hope i am clear in stating my requirements.
    Thanks in advance.
    SK

    Hello,
    Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
    Thanks
    N.P.C

  • Integration with MM how the asset transaction type is triggered during MIGO

    Hello everybody,
    Do you know how SAP triggers the asset transaction type during MIGO when Asset is purchase with MM?
    Is there a customizing transaction to set up the link between the movement type used in the MIGO and the asset transaction type during the receipt of the asset?
    Thank you in advance
    Regards

    Hello,
    This is maintained in FI-AA Spro - Financial Accounting - Asset Accounting - Transactions - Specify Default Transaction Types
    For example for GR (MIGO), the accounting transaciton is called "Acquis. from goods receipt w/o affiliated company" and the default FI-AA Transaction type is 120.
    Hope this helps!

  • Asset transaction type default wrongly

    I go to t-code ao76, for asset transaction type 350, there is no tab called "posting type" , thus i can't find gross/net indicator.
    but in other system, i see posting type indicator.
    any one know how to solve this problem, now any transaction type I created under ao76 does not have posting tab

    I already check in this way, by this way, it will not allow you to modify standard transaction type 3**, all my transaction type under transaction group 30 is missing posting type, none of the four radio button is selected in the expert view.
    Is there any note to repair transaction type group 30? I find some notes, they suggest using Zcorrection prgram and transfered from client zero, but none can treat group 30.
    thus I expect any solution, may be it needs other configuration?

  • Asset Transaction report in Document Currency

    Hi friends,
    We are using Asset Transaction report s_alr_87012039 or s_alr_87012048 to view the Asset line items. The report displays the values in Local Currency, we want to view the asset transaction values in Document Currency? is there any report available in SAP?
    Please advice.
    Thanks
    NTH
    Edited by: NTH on Mar 25, 2010 11:41 AM

    Hi,
    All the AA reports will output the data based on the currencies that are used in the dep areas of asset master.
    In generak 01 area will have LC.
    If you want to see asset transactions in DOC curr, go to FBL3N for the asset related recon accounts and choose field like Amt in doc curr and Doc curr.
    Hope you have set line item display for your asset related recon accounts in FS00.
    Thanks,
    Srinu

  • Profit Center not populated in Asset Transactions

    Hi
    We are trying to post asset transactions. We are on ECC 6.0 with New GL and document splitting on profit Center. while posting the periodic depreciation, system is not allowing posting of the document, saying that profit center is not populating in the line item. Pls suggest.
    Regards
    Rupal

    Hi
    You need to check the following:
    1. The cost center settings in T Code ACSET
    2. The splitting characteristics in the menu path:
    IMG>Financial Accounting (New)>General Ledger Accounting(New)>Business Transactions>Document Splitting>Extended Document Splitting
    3. If cost center is a required field in your asset master and if you have assigned a cost center in the asset master
    4. If a profit center has been assigned in the cost center master assigned in your asset master.
    Thanks & Regards
    Sanil K Bhandari

  • Asset Transaction Data

    I'm trying to find a better way to pull the asset transactions for the different add, retirement and transfer postings done during the year.  I use this data to breakout the "Trans.acq.val" amounts when I run S_ALR_87012026.  I'm currently using Technical Report RABEWG_ALV01.  The data comes out in the hierarchical view.  After I pull the data I have to export it to excel and reformat it.  Is there any report that I can use that will list each individual transaction with each asset number?  I'm essentially looking for an easier way to pull the asset transactions during the year so that I don't have to do all of the reformatting in excel.
    Thanks for any help that can be provided.

    Hi,
    Use the below, they might help you. (Try these first - AR01, AR02 & AR03)
    S_ALR_87011978 - Asset Balances for Group Assets
    S_ALR_87011963 - Asset Balances
    S_ALR_87011990 - Asset History Sheet
    S_ALR_87012004 - Depreciation
    S_ALR_87012017 - Asset Balances for Group Assets
    S_ALR_87012018 Depreciation and Interest
    S_ALR_87012020 Revaluation
    S_ALR_87012022 Depreciation Posted to Cost Center
    S_ALR_87012024 Depreciation Simulation
    S_ALR_87012026 Depreciation
    S_ALR_87012028 Net Worth Valuation
    S_ALR_87012030 Insurance Values
    S_ALR_87012032 Statement of Net Assets (Japan)
    S_ALR_87012033 Gain for Transfer of Reserves
    S_ALR_87012037 Changes to Asset Master Records
    S_ALR_87012039 Asset Transactions
    S_ALR_87012041 Asset Balances
    S_ALR_87012043 G/L Account Balances
    S_ALR_87012045 Fixed Asset Ledger
    S_ALR_87012046 Asset Acquisitions(Mid-Quarter-Conv)
    S_ALR_87012047 Asset Acquisitions(Mid-Quarter-Conv)
    S_ALR_87012048 Asset Transactions
    S_ALR_87012052 Asset Retirements

  • Asset transaction cancel.

    Auc transaction wrongly settle with other asset  transaction done  through MIGO & MIRO Done & payment made to vendor  can we cancel that migo transition and repost again with write class or is there any other way to correct this.

    This are the steps that I made:
    1. Go to Assets -> Asset workbench
    2. Look to the asset and click on retirements
    3. I complete all needed information and save it.
    That´s all what I did. If I go to the transaction, the field status shows "Pending".
    Is there any way to cancel this retirement?

  • How to update Asset transactions

    Hi FI Experts,
    I've been updating a asset by providing values for ANLC table during asset creation. The asset summary is getting updated properly for the fiscal year. I can see them under Planned Value tab..
    But Transactions is not updated.
    Could anybody help, which table contains the entry for asset transactions. Can it be updated during asset creation?
    Thanks & Regards,
    Ravi

    Hi Eli,
    I don't find the BAPI FIXEDASSET_CREATEINCLVALUES in the system. Could you please provide me the correct BAPI and if possible an example on how to create a reference asset.
    As I mentioned, I'm using Z Object, which is a copy of LAFA_ASSET_CREATE. I'm providing the values for ANLC using the FM AMSP_ADD_ENTRIES_TO_GLOBAL_TBS (available in LAFA_ASSET_CREATE). So the values for the asset is properly updated. I can not pass values for tables ANEK and ANEP using the same FM i.e. AMSP_ADD_ENTRIES_TO_GLOBAL_TBS so I'm using FM AMBU_APPEND_LINES_OF_ITAB_AC to update values of ANEP and ANEK. But the values for ANEP and ANEL are not getting updated. If you can suggest something here, it would be great help.
    Regards,
    Ravi

  • Is there any BC DataSource to extract Asset Transaction list

    My client is looking for a report to show the detailed list of FA transactions. I checked the DataSources, there is one 0FI_AA_11, Transactions, however, it looks like that is accumulated values to the period level, and my client requires a detailed report to show each transaction with dates.
    Is there any DataSource I can use or I have to create a generic DataSource?
    <removed by moderator>, thanks.
    Tommy
    Edited by: Siegfried Szameitat on Dec 3, 2008 3:15 PM

    I actually have done an asset transaction report purely based on the GL posting
    It can only work in version 7 DTP technology using the semantic key to group together transactions of the same fiscal year, document, co code into the same package
    Then you "flatten" per doc no the FI journal and by doign so you can move the Vendor fromt he K BSEG record onto the A Asset Record
    ie
    Dr asset
    Dr vat
    Cr Vendor
    You can then move the vendor number onto the Dr Asset line (which normally helps!)
    True you dont get a deprecation area - but then an aset is normally always set up in the std deprecation area then other depn areas for tax differences etc.
    However if you want a true asset listing - I just basically use the std AA model and drill down to asset then RRI into this asset transaction report

  • Document type for Asset Transactions

    Hi,
    I would like to know where the document types for asset transactions i.e acquisition, transfer,retirement are defined.
    Thanks
    Suresh

    Hi,
    A073
    A074
    A076
    A077
    Best Regards
    Ashish Jain
    Message was edited by:
            Ashish Bohara

  • Asset Transaction of Previous yr 2008 not reversing in yr 2009

    Dear All,
    We have an issue in FI-AA. We are trying to reverse one document in Asset transaction TTYPE 100 & 101 posted in 2008 in yr 2009. The system says -
    Reversal not possible (asset val. date in diff. Fyear frm posting date)
    Message no. AA453
    Diagnosis
    You tried to reverse a document.  This document contains postings to an asset with an asset value date in a different fiscal year.
    Year 2008 is opened still.
    What is the reason for this error? Can we reverse documents in current year of previous yr docs?
    Any help is highly appreciated.
    Thanks.
    Regards,
    Sree

    Hi
    You can Reverse the Acquisition of Previous Fiscal Year in the Current Fiscal Year.
    Use Transaction Type : 105 or 160 , one is for previous years and other for current years Acquisition Reversal
    (i dont remember, kindly check)
    70 AUC Asset (TTYPE : 100) Amount
    75 Asset (TTYPE : 160/105)
    40 Expense G/L A/C Amount
    75 Asset (TTYPE : 160/105) Amount
    Hope this helps you resolve your issue of Reversal.
    Regards
    Venkat

  • Do not update in qty for asset transaction

    Dear all,
    the system update the qty field in asset master data when transaction take effects. But there is any why that qty field in asset master data do not update  after transaction takes place like when transfer from one asset "a" to asset "b" with t code ABUMN.
    asset a with qty 1 and asset b with qty 2 in the master record,
    when transfer from a to b the system must not update the qty field in asset master data that the system updates to 3.
    How can the system do update qty ?????
    regards

    Hi,
    This is the standard behaviour of the system.
    If a transfer takes place from asset X to asset Y, then the system adds the sending asset's qty to receving asset's qty, only if the both UOM are same.
    Often users create an asset master with values in qty fields also, but that qty field should be blank only, since the qty will be added to it through asset transaction only.(if earlier qty is 0 and transaction qty is 1, then it would be 0+1=1)
    In your case you might have created your second asset with 2 qty and transfered 1 qty from sending asset, so the system added the both quantities in receiving asset. ( 1+2=3), as you are aware of this.
    Thanks,
    Srinu

  • GL balances table and asset transactions

    I would like to know the tables where I can find the information for GL balances monthwise and which tables to look for in asset accounting for Asset transactions like acquisitions, retirements depreciation etc monthwise.
    Any clarifications will be appreciated.
    Thanks
    Krishna

    Hi,
    Try to look into these tables:
    SKA1     G/L Account Master (Chart of Accounts)
    SKAT     G/L Account Master Record (Chart of Accounts- Description)
    SKB1     G/L account master (company code)
    AGKO     Cleared Accounts
    ANAR     Asset Types
    ANAT     Asset type text
    ANEK     Document Header Asset Posting
    ANEP     Asset Line Items
    ANEV     Asset downpymt settlement
    ANKT     Asset classes- Description
    ANLA     Asset Master Record Segment
    ANLB     Depreciation terms
    ANLC     Asset Value Fields
    ANLH     Main asset number
    AT02T     Transaction Activity Category- Description
    AT02A     Transaction Code for Menu TIMN
    AT10     Transaction type
    AT10T     Name of Transaction Type
    Is it helpful?

  • LSMW  for t-code ABSO (Create Asset Transaction)

    Hi All,
    I'm new to LSMW.
    I get the requirement to create LSMW tool using t-code - ABSO(Create Asset Transaction).
    Could anyone provide some idea/ guide how I perform recording while the
    - transaction type A and B restrict posting to <u>depreciation area 04</u> only.
    Is there any way to verify / do it? Please kindly advise.
    Thank you!

    Hello Little
    I know this is a very old thread. I am in a similar situation as you were. We have multiple transaction type, each calling specific depreciation areas only. Thus my input file has, for  each asset a Depreciation amount, special depreciation etc, based on the transaction type. When I create the LSMW, it maps the target fields (like NAFAV, NAFAL etc) to only one depreciation area. Thus all the values during running the file are wrong.
    Can you tell me how you managed this?
    Like you I am also new to LSMW!
    Thank you

Maybe you are looking for