Assign Company Code to FM area greyed out

Hi,
We are in 4.7 and currently have assigned one company code  to FM area and now we have created a new company code and want to assign the new company code to the existing FM area but noticed that in IMG 'Assign company code to financial management area' the field 'FM area' for the new company code row  is greyed out and unable to assign it.
Please let me know if I have missed any configuration.
Thks
VS

Hi,
We can assign one FM area to more than one company code & not required any additional configuration
I Guess, when you are trying to assign, same time some user using the same table related to FM area or Company Code.
so Just try again with same path
Thank you
Anil

Similar Messages

  • Assign Company Code to Controlling Area

    Sap FICO Experts,
                               I have error in <b>OX19</b> T_code. Here I had to assign the company code to Required controlling Area. But it exists Error, "Data in Company Code <b>SMSL</b> not Maintained"
                               Kindly tell me What I have to do the futher Process.

    Hello,
    review the settings of the company code SMSL in transaction OBY6. Pay special attention to the assignment of CCode to CoAr... or other similar settings related to controlling...
    If this doesnt help, pls post here the number of the message.
    I hope this helps.
    Richie.

  • Cant assign company code to controlling area

    Dear All
    I have created a compnay code but when ever i want to assign it with controlling area its show no data maintained .can any one give me a solution with TC .
    Yeasin

    Hi
    Controling area chart of accounts and fiscal year and  Chart of accounts and company code Chart of account and fiscal year should be the same
    Have you checked it?
    Thanks & Regards
    Phaneendra

  • Error Mssg: FI673 while assigning company code to FM area

    Hi,
    I have multiple company codes and only one company code (A) is assigned to FM area and another company code (B) is not assigned to FM area but some transactions have already been posted in dev client, I got the following error message while trying to assign the company code B to the same FM area.
    "You must not change assignment to company code B
    Diagnosis:
    There is already actual data for FM area, which is assigned to company code B"
    Please note that I have already deleted the FI transactions for company B thru t-code OBR1 but unable to delete the CO transactions as multiple company codes assigned to one CO area.
    Please let me know how to overcome this issue of assigning the company code B to FM area.
    Thanks
    VS

    Hi,
    check SAPNET note 1502436 maybe its helpful.
    Best regards, Christian

  • ALE configuration, Assign Company Code to Cross-System Company

    Hello all,
    I set up and configured ALE so that we can keep our production, QA, development master data in sync.  I activated the change pointers for the particular message type for which we want to create IDOCs when new master data is created, or existing master data is changed.  IDOCs are then sent to the QA and development systems.
    Are these three ALE configurations associated with anything outside of ALE?  Is there any area that can or will be affected by these three configuration settings?
    Transaction <b>SALE</b>
    <b>Cross-System Company Codes</b>
         - all Company codes in our system
    <b>Assign Cross-System Company Code to Chart of Accounts</b>
         - all Company codes are associated with the one chart of accounts
    <b>Assign Company Code to Cross-System Company</b>
    -     global company code is the same as the company code
    Thanks
    Bruce

    In T.Code: OX19 - Assign company code to controlling area
    Please check that if for ur Controlling Area, the
    Currency Type:
    Currency:
    Currency Type
    10     Company code currency
    20     Controlling area currency
    30     Group currency
    40     Hard currency
    50     Index-based currency
    60     Global company currency
    Currency
    required code of Currency
    Should/Are properly maintained in OX19.
    This type of error will be for this stage itself.
    Provide points if satisfied
    Regards
    Dinakar
    SAP will be throwing this type of messages when
    Differing currencies: USD - CAD
    Message no. KT276
    Diagnosis
    The system makes consistency checks during assignment of a company code to a controlling area as part of assignment control.
    The same checks take place if assignments already exist and you change the basic data in the controlling area, or if you define the controlling area and company code as a 1:1 structure.
    If the check finds an error, the system cannot execute the function ("Assign" or"Change basic data"). If you do not maintain the required data for the consistency check (such as currency, chart of accounts, or fiscal year variant in the company code), this also results in an error message.
    You want to use currency type USD. The SAP System determined the company codes assigned to controlling area CAD and the relevant currencies. One discrepancy occurred in one of the currencies.
    Note
    A precondition for currency type "10" is that all company codes assigned to the controlling area must use the same currency.
    A precondition for currency types "40" and "50" is that all company codes assigned to the controlling area must belong to the same country or use the same hard currency or index-based currency.
    A precondition for currency type "60" is that all company codes must belong to the same company or all the companies must use the same currency.
    Procedure
    Change the currency type or the currency settings.

  • Assignment of Company Code to Controlling Area

    Hi All
    Please see if you can help me out.
    I am working on a Singapore project.
    I have 4 company codes say 2000,3000,4000,5000 which have been assigned to a company SGSS.
    Then I created a controlling area S001.
    I successfully assigned Company Codes to Company & Company Codes to Credit Control Area 5100.
    But when I try to assign my Company Codes to Controlling Area S001, the system throws a problem saying,u2019 Data in Company Code 2000 is not maintainedu2019.
    I have maintained all the data in Company Code 2000. But as per my knowledge we donu2019t maintain u2018currency, fiscal year variant, and chart of accountsu2019 in Company Code. All these fields are maintained in u2018Controlling Area S001u2019.
    __Data in company code 2000 is not maintained.__
    __Message no. KT294__
    __Diagnosis__
    __Assignment control requires that the currency, fiscal year variant, and chart of accounts are all maintained in the company code. At least one of these settings is not maintained in company code 2000.__
    __Procedure__
    __Complete data maintenance in company code 2000. Only then can you assign company code 2000 to controlling area SG01 possible.__
    Please see if anyone can bring some light on thisu2026..
    Thanks & Regards

    Hello,
    You need to fulfill two basic rules to assign two or more
    Company Codes under the same controlling Area:
    Operating Chart of Accounts shall be the same for all
         Company Codes.
    Fiscal Year Variant shall be same for all Company
         Codes.
           However, the fiscal year variant in the controlling area and the company codes
           can have different number of special periods. The number of posting periods
           must be the same.
    Please recheck that you have fulfilled these.
    Regards,
    Ravi

  • Issue in Assignment of company codes to controlling area  TKAO2 and OKKP

    Hello Gurus,
    I configured company code and controlling area in development client  and transport to Testing client.But in QA client I can see  in the Table TKA02 and respective assignment of company code to controlling area .But if I am checking in TCode OKKP and selecting Controlling area and checking the company codes assisgment there is no asssisgmnet. is this issue relating to transport as I am FICO consultant not geting solution.
    This issue pertain to only one  controlling area other controlling area with there company code assignment is correct.
    Thanks a lot
    Edited by: Manu Rathore on Apr 7, 2011 8:56 AM
    Edited by: Manu Rathore on Apr 7, 2011 8:58 AM

    Hello Balaji,
    But I transport everything through one transport request and I haven't maintain any sequence.can this issue  be due to mine non maintaining   of sequence in transport request or something else?
    if so How to solve it.
    Many Many Thanks
    Manu

  • I use iphoto 8.1.2 on OSX 10.5.8. some of my events are greyed out, showing no images.

    As outlined briefly above quite a few of my events in iphoto have appeared 'greyed out' when ive restored them from the trash. I was trying to back up my iphoto library, with no proper knowledge, and I think this may have caused the problem. I dragged and dropped my original iphoto library into a non time machine external hard drive. I then went back to the original and sent the majority of photos to the iphoto trash (about 12 thousand photos). When I tried to delete them from the iphoto trash it wouldnt allow me to do it - something ive read is quite normal for that amount of photos.
    After this i read more about multiple iphoto libraries so decided to restore all these 'deleted' photos back to iphoto so i could sort things properly (im ultimately wanting to have one large iphoto library on my non time machine external hard drive, then have a smaller, more current, iphoto library on my internal hard drive).
    When i did this about half of my events were greyed out, and so were the images in the events. although the information assigned to the individual event, such as number of photos and event name were still correct and clearly showing. Why has this happened?
    My only thought is that when I tried to delete the photos from my iphoto trash initially this could have messed it up some how. The majority of events that have been affected are my older events, but even some brand new ones are greyed out too.
    I would realy apreciate any advis on this, the photos ive lost are very importat to me so im fretting alot.
    Thankyou in advance
    JAB

    I did try that yes, and it had resorted to the same version that was on my internal hard drive. Im not sure if ive done something wrong at some point in the past while trying to sort it all out - the situation suggests I have?
    Essentially the two iphoto libraries I have are the same (one version now just has my attempt at restoring the files from iphoto trash, the other version has the photos still in iphoto trash).
    Im at a loss knowing where these files have gone/ why i cant access them if the info for those files is still showing?
    Thanks for your continued help!
    JAB

  • Properties & tools are greyed out

    Hi,
    Whenever I open a new document in Flash CS5 Pro, the properties & tools panels are greyed out. Does anyone know how to fix this? Thanks in advance.
    pjirles

    new document  "Action Script 3.0" or new document "Action Script File"
    Action Script File is only code then all panel are disableds

  • Assign company code to consolidation staging ledger

    Dear Guru,
    When I execute tcode GC41, there is an error message , it said :
    No ledger for consolidation has been specified
    Message no. GC191
    Diagnosis
    No consolidation staging ledger was allocated to the company code.
    System Response
    If an extract is to be created for consolidation, then every company code must also be allocated to the consolidation staging ledger. This means that every company code is posted directly to two ledgers.
    Procedure
    Every company code which is to be transferred to consolidation must be allocated to the consolidation additional ledger. The consolidation additional ledger must point to the GLT3 data base.
    How to assign company code to consolidation staging ledger?
    I check Tcode OCZ2, there is Ledger 9 (Additnal Consolidation Ledger), should I create new ledger for consolidation staging ledger? How to make it?
    Thanks before.

    There are some steps that one must do in order to populate the Cons tables.
    Some of them you may find in SPRO t-code. SAP.help.com is not very bad in this also.

  • ASSINING COMPANY CODE TO CONTROLLING AREA

    hi,
       iam trying to assign the company code to the controlling area but there is field <b>C Ctr Hierarchy</b> which i need to fill up, how can i do that one before i assign company code to controlling area

    when you are creating a Controlling Area Cost Centre Standard Hierarchy is mandatory to can as well give the Std. Hier. while creating Controlling area itself and save it. The System will remind you that the said hierarchy is not maintained and should it be maintained now?
    Click Yes, and save again.
    the controlling area and std hierarchy get created simultaniously.
    Assign points if found useful
    Regards
    Praveen

  • SRM Confirmation - All buttons are greyed out

    Hello experts,
    I have seen posts on similar isue but could not find one which was relevant.
    Here is my problem.
    I see that after a confirmation is created, when I go back into "Display and Process Confirmations ", all the buttons are greyed out. The header statuses for the confirmation are as given below.
    Complete 
    Confirmed 
    Created 
    Approved 
    Currently Being Transferred 
    I am not sure why it says "Currently Being Transferred", when its actually posted in the backend.
    All clean up and update jobs are running fine. I am on SRM 5.0. I even tried the program to regenerate BBP_DOCUMENT_TAB entries.
    Please help incase you have experienced this or know the solution to resolve this problem.
    Thank you.
    Thanks and Regards
    Manish Mohan

    Hi Manish,
    Did you manually run the update reports CLEAN_REQREQ_UP and BBP_GET_STATUS_2 without any document numbers?
    So there is no entry in BBP_DOCUMENT_TAB for this document?
    You mention that the document has been created successfully in the backend?
    Did you check the status of the IDOC in both EBP and the backend?
    Nevertheless I have an Info for you - If you debug the program                                   
    clean_reqreq_up you may find out that the corresponding IDOCs within the                              
    backend system are never found by the FM                                                   
    B46A_GOODSMVT_UPDATECHECK - this FM is called within the program                                    
    clean_reqreq_up with the parameters: 
            object_ident-objkey = IS_DOCUMENT_TAB-OBJKEY.                                               
            object_ident-objtype = 'IDOC'.                                                              
            object_ident-logsys = sender_logsys. 
    where the OBJKEY is the IDOC number within EBP-System.                                              
    Because the corresponding IDOC is never found in the backend system                                 
    (the return code from backend system is always 1 - object not found)                                
    all confirmations get the status I1019 (Transfer Error) and stay hang                               
    in the table bbp_document_tab in the QSR-system and also alert message                              
    is created for them.                                                                               
    The question is why is it not possible for this FM to found any IDOC in                             
    the backend system even when there are posted there...
    this FM is called within the program where the OBJKEY is the IDOC number
    within EBP-System.
    where the OBJKEY is the IDOC number within EBP-System.                                              
    Because the corresponding IDOC is never found in the backend system                                 
    (the return code from backend system is always 1 - object not found)                                
    all confirmations get the status I1019 (Transfer Error) and stay hang                               
    in the table bbp_document_tab in the QSR-system and also alert message                              
    is created for them. 
    So if there is no entry in BBP_DOCUMENT_TAB, maybe, regenerage another one and run this in debug mode and recheck.
    Hope this helps,
    Kind Regards,
    Matthew

  • How to get new company code and controlling area in SRM

    Hi SDN,
    we are on SRM 5.0.
    Our finacial experts want to implement a new company code and controlling area.
    In SRM I can set up a new company code easily in ppoma_bbp and import a new plant from backend for the new company code.
    When testing in EBP I get the error: "company code xyz not available in controlling area zzz"
    So I need to import the new backend controlling area, too. How can I get the second controlling area in SRM?
    Thanx for help,
    matthias

    Hi Muthuraman Govi  and Sanjeev,
    in fact I can see in backend in transaction KS03 (show cost center) there in the F4s, which comp.code + controll area combinations are valid and have indeed cost centers assigned.
    So I have a new valid comp.code and a new valid cont.area.
    The new comp.code belongs to the new contr. area.
    In SRM I set the BUK attribute as described by Sanjeev (I had that already done). Still, if it is like you say, why do I get an error in EBP when trying to buy products from the new plant in the new company code...
    Is there any more config.work necessary in backend or SRM?
    kind regards, matthias

  • Text wrap options are greyed out

    Hi,
    I am trying to create a "drop cap" by selecting a text box and changing the wrap options in the inspector however, the "object placement" options to wrap the text are greyed out and I can not change them, except for the options below, such as "object causes to wrap" check box and the "text fit" boxes.
    Is this a glitch? I have restarted both my program and whole computer, as well as tried it in a new document, and it still is coming up greyed out.
    HELP, I have a project due and I need to be able to add in drop caps!
    Thanks

    Hi Architecture Guy
    Welcome to the forum.
    A better method for creating drop caps:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=85&mforum=iworktipsn trick
    Peter

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Maybe you are looking for