Assigning a thumbnail to a production

How do I assign a specific thumbnail to a production? When the Apple trainers were here the said it would be the top file in alphabetical order. But after working with FCS for a day or two it seems to be the first file you put into the production, which is the way artbox worked. But I have some productions in which I need to change the thumbnail representation. what is the best way to do this?
Thanks

It is the first file with a thumbnail that you put into the production which becomes the production's icon. Even if you remove the asset from the production, the thumbnail will still remain.
Unfortunately you cannot change the thumbnail after you have done that. If anything you could create a new production with the same metadata, drag in the clip/thumbnail that you want to represent the production FIRST and then once that's created, just drag everything else into the production.

Similar Messages

How to assign a Sales Org and Product group

all the config have been maintained (creating the hierarchies/categories, assign the set types to categories etc.) under IMG->Cross-Application Components->SAP Product.
Also assigned the set type for sales data/product group for category MAT_DIEN.
But the fields from these section are greyed out when I try creating a product (not able to assign the sales org, or product group)
Edited by: Agarwal Ameet on Aug 9, 2010 9:56 AM

Dear Sun,
One way is:
Maintain the required setting in T. Code: VKOA.
Another way is:
Create an Internal Order (T. Code: KO01) with required Field-entries in
Tab: Assignment --> Profit Center; and
Tab: Period-end Closing --> Cost Center ( or G/L account).
and attach it to your Sales Order.
To know more about Internal Order Processing, refer:
[Internal Order|http://help.sap.com/saphelp_erp2005vp/helpdata/en/a9/ab7f68414111d182b10000e829fbfe/frameset.htm]
Or, consult FI-Personnel at your end.
Best Regards,
Amit
Note: Also, sharing one document for knowledge-sake:
[Acct assignmt logic sales order proc.|http://www.saptechies.com/acct-assignmt-logic-sales-order-proc-rem/]

Mass Assignment of sales organization to products

Hello experts,
I'd like to ask if anyone knows an easy way to maintain, mass update all products or products of a category with tha sales data?????
A trans. or report or smth, to assign the sales area XXX to all the products of the category YYYY.
Thank you in advance
Michalis Tamiolakis

Hi,
here's the menu path in IMG: Enterprise Structure -> Definition -> Sales and Distribution -> Define... sales organization
But please note: this is definitely an optional task, it's only for statistical purposes. For reporting purposes you should still be able to get all your analyses based on the organizational assignments of the sites (site master) and also in the business documents (e.g. in purchase order header data) Anyhow, there's one restriction: if you do this, then the purchasing organization in question has to be assigned as standard purchasing organization to those sites, that have the sales organization assigned (further purchasing organizations could still be assigned then).
From a business process point of view the sales organization - purchasing organization assignment is of no relevance.
There might be one aspect related to Retail Pricing: if you forgot to assign a reference site for pricing (you should do this though! - Logistics General -> Retail Pricing -> Sales Price Calculation -> Assign Pricing Type/Reference Site to Organizational Level), the system could use that purchasing organization for supply source determination.

Assign GL accounts to the product categories

Hi Experts,
We are on 4.0, and classic scenario.
We are facing a problem regarding finding the relevant G/L account on behalf of a product category in SRM.
Example:
For product category 10101500, the user should have the possibility for assigning G/L account:
29000000
29000001
29000002
In our system a user creates a shopping cart. The user choose a product category, 10101500, on behalf of this product category, the user should have the possibility for choosing the different G/L accounts, 29000000, 29000001 or 29000002. When the user has the different G/L accounts on screen, the user can choose the relevant one into the shopping cart. Are there any experts who have worked with this kind of issue?
Best regards Kim

Hello Kim,
Process you are describing is not standard.
If you look at following path in SPRO:
SAP Implementation Guide -> Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Account Assignment -> Define G/L Account for Product Categoriey and Account Assignment Category
you will see that G/L Account number is assigned to one product category ID with one system source (for product category) and one account assignment category.
So, the only way to be able to select different G/L account number for same product category is to give for each G/L account a different account assignment category.
Nevertheless, this has to be checked to know:
1- if it can work technically in SRM,
2- but especially if Controlling functional team agrees.
An alternative solution would be to use BAdI BBP_DETERMINE_ACCT: instead of giving choice to user to select himself G/L account, determine directly G/L value according to functional rule(s) given by Controlling team.
Regards.
Laurent.

Assign sales organization data in product in CRM

Hi Gurus,
I need to assign/ delete the sales organization in a product which has been downloaded from ECC in CRM. It seems that we cannot change the data in "sales and distribution tab" unless making the SET TYPE editable.
Only 3 SET TYPES in the "sales and distribution" tab can be made editable by adding them in the table CRMC_PRD_CHANGE.
CRMM_PR_SALESA, CRMM_PR_SALESG and CRMM_PR_SALESG
Does someone have any idea of how to add a sales organization in a product that comes from ECC in CRM ??
Thanks for your help,
Jeff

Hi Jeff,
I am afraid whether one will be able to edit a product which is downloaded from R/3 to CRM. All the changes should be done in ERP and the same will be downloaded via delta download.
Please have a look into the following thread:
Products in CRM doesn't have Sales and Distribution Data
It might help you. Hope this helps!
Regards,
Chethan

Assigning mic in operations of production order for newly inserted oprt

Hi, Please advise how to assign mic to the newly inserted operation of the prod order?i mean say 3 operations copied form master data. we added a 4th operation manully. i want to assign new inspection characterstics to the 4th opration. plese advse.

Dear Raju
1) Go to CA02
2) go to header
3) Maintain inspection Point as 150
4) Maintain partial Lot Assign as partial lot assignment according to plant default
5) At Operation level maintain a QM work center ( testing ) with Control key QM04 ( as per your requirement)
6) double click on the control key and go to Quality Management : Inspection points
7) Maintain Inspection point completion : Quantity , Valuation and confirmation ( as per your need , you can select other options also) press F1 and see the impact of each
8) choose time related and keep Tfac 1 and Unit as HR ( As needed)
9) You can select quantity - related also and then maintain the quantity.
10) Select the QM operation and maintain in the MIC
Regards
Gajesh

How to chose or change the production folder thumbnails ?

There is a way to assigne a specific thumbnails for a production folder ?

Hi
There is a way to generate a specific clip for the Thumb nail of a project, that is very simple. The only trick is that you have to do it when you first put something into the project. I.e. Get at still pic of what you would like the thumb nail to be and add this first to the production folder. This is only a work around and yes it would be good if this thumb nail could be changed after the project is created. It is however possible to find this thumbnail in the "Proxies.bundle" using show contents and change it. But I would be careful to create a thumbnail of the same specs as the original. Whilst I have discovered the thumb nail source file, I have not tried it myself. To fix my thumb nails I created a new projects with the same name and dragged in the desire pic first then dragged across the rest of the original media.

Which are the standard assignment blocks that should appear in SAP Product?

Hello Guru's
Currently I am creating some new products to check the fields available in every assingment block within the product, when I create my new transaction and add a new position (product) I went in the link to see the product information which are the following 4 standard assignment:
- AB Product Details
- AB Categories
- AB Notes
- AB Attachments
I unmarked the pricing on the item category, because this is only a test and we don't have any pricing definition yet. So I was wondering if this is all the assignment blocks that I should be expecting inside the position or if I'm missing any step on the road.
Also we just use the standard SET TYPES for the base hierarchy so I thougt that maybe all the assignment blocks that I shoud create them through COMM_ATTRSET route.
Can anyone help me out confirming me if these are the only assignment blocks that SAP CRM Products contain or which else I should be expecting?
Thanks in advance
Sue M

Hello Sue,
First you should know which are the settypes and Reltypes that you want to add to your product category.
Example for settypes would be COMM_PR_UNIT and COMM_PR_MAT in order to get Unit Of Measure related fields in UI.
CRMM_PR_TAX for maintaining to product tax details.
You can refer table COMC_SETTYPE to get a list of all available settypes.
Example for Reltype is PRDBP, if you want to maintain BPs associated with products or ACCESS if you want to maintain
accessories for product etc.
You can maintain the settypes and Reltypes to product cateogry using txn:COMM_HIERARCHY under the tab
'Set Types' and 'RelnTypes'.
Once you maintain this, corresponding views you need to be added to product/service OVP like PRD01OV,PRD02OV etc.
(PRD01OV/MaterialOV) in the configuation. If you open the configuration for view PRD01OV/MaterialOV,
you can see the corresponding view in 'Available AB'. This you need to move it to ' Displayed AB', in order for this to available in
CRM UI. (Eg: PRDIL/Accessories)
Hope this helps!
Best Regards,
Shanthala Kudva.

Customised Product Hierarchy assignment to application to "Sale" in CRM7.0

hi Gurus,
1.Here my client wants customised hierarchy(say "soldprod") created in sap crm 7.0 to be assigned to application "sale" instead of R3prodhier which is standard, and then he wants ECC products to be migrated as product category under this hierarchy.
is it possible..? or any workaround for this situation..?
2.can we assign application "sale" to two product hierarchy..? as far as i know it is not possible..
Thanks,
gaurav

Hi Tanya
My issue is got sovled with SAP note 1398619 .However, for the second issue there is no finding.
I am assuming ,that is standard SAP CRM behaviour , if we assign any account in crm , that will be shown in the assignment block.
Regards
Satish

Production Order number assignment CO01

Hello,
I'm looking to have the production order number assigned early: on entry into 'Production Order Create: Header' screen. Can this be done in standard SAP or would I need to use an exit and external number range?
Thank you, Mart

Dear Mart,
Check the number range assigned to the order type and check whether check box for external is included in CO82.
Or else you can confirm the same through T Codes,SNUM or SNRO for the object AUFTRAG.
You can enter a number between the from and To no range in CO01 and execute the same.
Regards
Mangalraj.S

BAPI for assigning models to the Product

Hi
We are trying to create some product locations which are not there in SAP R/3.
Is there any BAPI which can be used to assign models to the created products ?
Thanks and Best Regards
Mitesh

Hi Mitesh,
You can use '/SAPAPO/DM_MODEL_ADD_PROD' for assigning the models.
( /SAPAPO/MOD_VERS_BEGIN_ACCESS and /SAPAPO/MOD_VERS_END_ACCESS function modules can be used for locking and unlocking the models).
Regards,
Siva.

Product: Accessories Assignment block - link does not work

Dear all,
We have an assignement block 'Accessories' to link products together.
However, the link does not work :
If I click on the first link, nothing happens.
Is there any customizing to maintain for that point?
Thanks a lot,
Regards,
Emilie.

Hi ,
See if this link is helpful for you.
Product Proposal -Accessory assignment block cannot be expanded, CRM UI 7.0
Rgds
Hari

Help with product category assignment please

Hi experts,
I need to do a modificacion in my R3 downloaded products to CRM. Because a
product catalog fulfitment, I need to modify the assigned product hierarchy
in CRM but I don't know where can I do it this mapping between an R3 product
hierarchy and CRM product hierarchy.
I explain, if product A belongs in R3 to product category A, I need to modify
this assignment in CRM, for exmaple, product A in CRM will belong to product category
B.
Modifications/creations on product master are only downloaded to CRM, never upload
from CRM to R3.
Any help in this issue please? Is possible to get a behaviour like this?
Thanks to all.
Javier

Hi Javier,
You can always do a RFC data upload of the changed product from CRM to R/3. I guess you do know how to trigger a OLTP data transfer in product master maintenance transaction COMMPR01.
Thanks,
Sudipta.

Assigning Market segments to Product Catagories

Hi,
How do we define the market segments to the Product Catagories. In the Product Hierarchies and Catagories Screen, I created Product Catagories and now I want to assign Market Segments to the Product Catagories. I am not finding a provision to do that. Can anybody suggest how to go about it.
Thanks,
Ninju

Hi Ninju,
You need to create a campaign under which you can assign your segments and product information.
To create campaigns first create mkt plan, mkt plan element, campaign, campaign plan element. This is under Marketing Planner.

How to Assign a Multiple Sales organization to one product ?

Dear All,
I have assigned multiple sales org. to one product in product master. For ex:
Sales org. 1 ,2,3,4 & 5.
During the campaign creation If I select the same product for sales org. 1 it shows no error.
If I put sales org.2 it shows warning message saying that Product is not assigned to Sales org. 2.
But I have assigned all 5 sales org in the product master, however only one SO(i.e.SO1) is active at one time.
How to assign multiple SO to one product ?
kindly send your valuable input.
Regards
Pramod

It must be looking at the sales org at the header level. Change the sales org at the header level to sales org 2 and try adding the product for the same sales org 2. I think it will work fine now.

Assigning a thumbnail to a production

Similar Messages

Maybe you are looking for