How to Assign a Multiple Sales organization to one product ?
Dear All,
I have assigned multiple sales org. to one product in product master. For ex:
Sales org. 1 ,2,3,4 & 5.
During the campaign creation If I select the same product for sales org. 1 it shows no error.
If I put sales org.2 it shows warning message saying that Product is not assigned to Sales org. 2.
But I have assigned all 5 sales org in the product master, however only one SO(i.e.SO1) is active at one time.
How to assign multiple SO to one product ?
kindly send your valuable input.
Regards
Pramod
It must be looking at the sales org at the header level. Change the sales org at the header level to sales org 2 and try adding the product for the same sales org 2. I think it will work fine now.
Similar Messages
-
Assign sales organization data in product in CRM
Hi Gurus,
I need to assign/ delete the sales organization in a product which has been downloaded from ECC in CRM. It seems that we cannot change the data in "sales and distribution tab" unless making the SET TYPE editable.
Only 3 SET TYPES in the "sales and distribution" tab can be made editable by adding them in the table CRMC_PRD_CHANGE.
CRMM_PR_SALESA, CRMM_PR_SALESG and CRMM_PR_SALESG
Does someone have any idea of how to add a sales organization in a product that comes from ECC in CRM ??
Thanks for your help,
JeffHi Jeff,
I am afraid whether one will be able to edit a product which is downloaded from R/3 to CRM. All the changes should be done in ERP and the same will be downloaded via delta download.
Please have a look into the following thread:
Products in CRM doesn't have Sales and Distribution Data
It might help you. Hope this helps!
Regards,
Chethan -
Assignment of Single sales office to multiple sales organizations
Hi,
We have a scenario where we need to Assign single sales office to multiple sales organizations in CRM. When i am trying to assign sales office to more than one sales organization 1st assignment between Sales office and Sales Org is getting deleted, and only the 2nd assignment is available.
Please let me know how to overcome this problem.
Regards
RajuHi
1. There are 2 version in CRM Org Model.
a) SBIV (Standard Backend Integration Version)
b) EBIV (Enhanced Backend Integration Version)
2. EBIV is used to handle multiple assignments in CRM system.
3. As you know we have 3 Org Units as far as Sales is concerned i.e. Sales Org, Sales Office, Sales Group.
4. In R/3 there is a standard way to maintain multiple assignments among these org units.
Ex: Sales Group 'X' works (assigned) for 2 Sales Offices 'North' and 'South' simultaneously.
5. But in CRM this assignment is not as common as in R/3 and is not supported thru SBIV.
6. If you would like to have these multiple assignments made in R/3 available in CRM as well you may want to go thru EBIV.
7. Once you run EBIV you cannot go back to SBIV.
8. In EBIV divisions and distribution channels can only be assigned to sales units (sales organizations, sales offices, and sales groups). If they are assigned to any other neutral Org Units (Org Units without any Org Attributes), those assignments would be deleted once you shift from SBIV to EBIV.
Hope this helps.
Regards
Manohar -
How can I create multiple sales orders with reference to one contract?
Hello Gurus,
Can you please how can I create multiple sales orders with reference to one contract?
thanks!
Rakeshhi
Lets consider example
In your contract for line item 1 you have entered qty 100
You careated sales order with 70 quantity, and now you want to creat another sales order for 30
For this first you need to check what is your item category in contract (VA42)
Goto VOV7
SPRO - IMG - Sales and distribution - Sales - Sales document item - Define item categories - Go to change mode
Make the completion rule = B Item is completed after full quantity has been referenced -
How to assign version in sales order and transfer to PP module
Hi all
Users say that customer will require to produce/deliver old goods (we active revision level. The newest material version is D. But customer want version B). How to assign version in sales order and let PP user know the version customer want (MRP run and production order must use version B's BOM)?
Regards,
RitaHi,
i have a query if you have implimented ECM this will serve the purpose but it also depends on how good the planning is, in ur client site ( out of SAP ) where planner will plan according to the customer requirement as to which version to be kept active for a date range.The ECO analysts(functional) or consultants will make the ECO changes for those dates.
In general for those type of customers (who needs old version) a different SO created under different document type which will create a production orders with specific order type depending on the assignment of requirement type and requirement class.
those specific production ordertypes can be inturn assigned to either different plant where your old version BOM's will be active.
You need to look into the custom settings in SAP to design the larchitecture to allign with other requirements.What i explained u is common methodology used.
Hope this is clear..
Prakash
Message was edited by:
prakash Uddagatti -
Pros and Cons for single sales organization and multiple sales organization
Hi!
Does anybody have a good data of Pros and Cons for Single Sales Organization vs. Multiple Sales Organization.
Thank you!Hi,
Actuall it all depends on the business process.
I will explain the answer to you through a practical example
like Ford, it has sales and services all across globe.
It is not advisable to manage all of its activities under only one sales organization, say Ford Inc.
So what it does is de-centralises the whole process according to the country, region so that the whole process is divided and hence can be managed more effeciently.
Hope this helps you in understanding the basics.
One sales org always provides you with very less data to update and maintain, while many sales org makes the scenario more complex.
One sales org always gives you the flexibility to bring any changes to the current scenario, while in multiple sales org to bring a change its a tiresome job.
These are some of the advantages and disadvantages of one to many sales org.
regards,
Siddharth. -
MILESTONE BILLING- Mile stone assigned to multiple sales orders
Hi,
My user has sales order in which he has used Mile stone billing
The Billing is being done in two shots - 60% once and the second time 40%
60% has already been invoiced and the 40% is creating a problem and they want the sales order to be closed
In one of the custom reports- it says that the 40% (mile stone number) is assigned to multiple sales orders and so the sales order cannot be confirmed
I am totally new to SD and so request to kindly explain high level concept and also provide the solution
Thanks,
SSHi,
Is your line item in sales order assigned to wbs elements?
If it yes?
check milestones may also comes from it- check with PS consultant-
you can also check milestome number and billing plan number- if you display milestone
Use CN41 transaction to check sales orders assigned to WBS element
uou can refer Table: FPLT
ICN53n-report
Thanks
Buddi Chidambaram -
How to assign employment to sales group
hi,
how to assign employment to sales group?
thankshi,
It will do by HR module guys........they will create Employee master data,there they mention sales group.......
reward me. -
Deletion of multiple sale orders at one shot
Hi Friends,
Can anyone tell me how to delete multiple sale orders at one shot?
Friendly
Rama RaoHi
Try doing it through LSMW, I used LSMW for deleting deliveries in mass and it worked
Anurag -
COPA - Multiple Sales Order with one wbs element. COPA does not reference
COPA - Multiple Sales Order with one wbs element. COPA does not reference of reference of sales order.
Hi All
Currently we are in process of implementation of project related to Club Service for one of the client.
Concept of this project is - there is "X" company engaged in supporting the different shared services for their client e.g. Client IBM - Shared Support Services of IBM is
u2022 IDM
u2022 Software Installation
u2022 Help Desk
u2022 Maintenance
Co.. "X' is performing these services for IBM. So for Co. "X" - IBM is one engagement. Like this way Co. X is performing such activities for many companies e.g. microsoft, HP, ABN AMRO etc.
Objective - Get the consolidate report from COPA (Customer wise/services wise/sales order wise e.g. IBM/HelpDesk/10002/10).
We propose a solution to create a project for each engagement and with WBS element. Each WBS element of different services e.g.
Project IBM Inc. 100.100
WBS Element 100.100.IDM
WBS Element 100.100.SoftIns
WBS Element 100.100.HelpDesk
WBS Element 100.100.Maintainance
For this engagement (IBM), we are creating a sales order with line items (for services) and account assignment is WBS element. In a sales order, there may be two lines for one services. In a particular period, there are many such sales orders for this engagement... Milestone billing/period billing is used depending upon the services rendered.
Now Cost Object will be WBS Element. So cost and revenue will posted to WBS and from this it goes to COPA. In a month of May 2009 two - sales order is booked with three different line items with account assignment is WBS element.
Sales Order Line Item No.....Item Account Assignment Revenue
10000 100 IDM 100.100.IDM 1000
10000 200 HELPDESK 100.100.HelpDesk 2000
10000 100 Maintenance 100.100.Maintainance 3000
Another Sales order booked with two different line items
10000 100 IDM 100.100.IDM 3000
10000 200 HELPDESK 100.100.HelpDesk 4000
Cost will be booked directly against WBS element.
In sales order level, there is no profitability segment, as cost object is WBS element.
Billing, revenue will be posted directly to wbs element, from this revenue and cost of sales goes to COPA.
Now in COPA,
1.There is only one line for WBS element ex. 100.100.IDM with revenue 4000 (combing both the sales order)
2.There is only one line for WBS element ex. 100.100.HelpDesk with revenue 6000 (combing both the sales order)
3.There is only one line for WBS element ex. 100.100.Maintainance with revenue 4000
In above case 1 & 2 we will not have reference of sales order and sales order line item in COPA table. There is only one line for this. So we can not have reporting to sales order level.
Is there any way by this the reference of sales order and sales order line will come in COPA for case 1 & 2.
Please help in this issue.
Regards
Abhay Dev
Ph:- 91-22-67782229
Cell:- 91-9819175185Hi,
For these case (multiple materials with different characteristics); have you consider going to next level of WBS Elements. Meaning; lets say currently you are assigning WBS "Engineering (which is a level 2 WBS)" to all the items in SO. Instead under "Engineering" create 2 or 3 level 3 WBS Elements as E1, E2 etc and assign them 1:1 to your sales order line items. This would eliminate the exit as welll as complex development option. And also will let you get all the data in COPA and in turn you can pull to BW as well for reporting. Just a thought.
Regards
Sreekanth -
How do I make multiple movies look like one?
I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.Would it work to make the navigation of the page go to the
next movie? -
How do I install multiple KMS keys on one server?
I currently am working at Phelps County Regional Medical Center in Rolla, MO and my question is: How do I install multiple KMS keys onto one server? This is very urgent and I have the KMS activating Windows 7 but, I also need all my Office keys, Windows
8, and Windows 8.1 to be activated via KMS. the current KMS is a Windows Server 2008 R2 server. Please help me out and thank you for your time! :)you need to apply the following update (http://support.microsoft.com/kb/2885698)to your KMS server so you can license up to Windows 8.1. From there your key for 8.1/2012R2 will license everything
downwards and then you can also install your Office KMS key without issue. If its Office 2013 then you need to download the files here (http://www.microsoft.com/en-us/download/details.aspx?id=35584)
Be kind and Mark as Answer if I helped. -
Preview; How can I open multiple PDF's in one window with Preview?
How can I open multiple PDF's in one window with Preview?
I have gone to Previews preferences and selected 'Open groups of images in the same window' and have tried every setting imaginable and nothing works. What am I doing wrong?Hi, a few ways..
http://www.monkeybreadsoftware.info/Freeware/CombinePDFs.shtml
http://www.monkeybreadsoftware.info/Freeware/CombinePDFs.shtml
http://www.macosxhints.com/article.php?story=20060327192826493&lsrc=osxh -
How i can combine multiple pdf files in one file using a macbook air
how i can combine multiple pdf files in one file
The application Preview.
Preview Help.
Save combined PDFs
Open the PDFs you want to combine.
In each open PDF, choose View > Thumbnails to display the pages of the PDF in the sidebar.
Drag the thumbnails you want to add (Command-click to select noncontiguous pages) to the thumbnail sidebar in the other PDF.You can add pages to the end of the document or between pages in a document. Drag thumbnails to reorder them. You can also add a PDF file before or after another PDF document.
Choose File > Export to save a new PDF containing all of the combined pages, or choose File > Save to replace the original version of the destination PDF with the version containing the combined pages. -
How can I have multiple accounts and only one library
How can I have multiple accounts and only one library that all the purchased items feed into?
ask your wireless provider.
Maybe you are looking for
-
How to stor special characters in a VARCHAR2 field?
I am trying to store a encrypted string into a 'varchar2' field. But, the encrypted string is not stored properly. Some characters are stored incorrectly. Can anybody help me in storing an encrypted string into a varchar2 field??
-
Cfqueryparam and non-English languages
Hi, I want to store non-English characters in NCHAR NVARCHAR and NTEXT field types. In the examples below fields LastName and FirstName are NVARCHAR type and Comments is NTEXT In the past when I wanted to store non English (Greek) strings or texts in
-
When i open imovie, it freezes. why, and what should i do?
I have a very important project to do for school and have to give it back next week. It's on iMovie, and it's a 54minutes video. Since yesterday, I have a problem. I don't know if because it's too big, but when I open it, it freezes, and the little r
-
How to compile & run using command prompt
Hi all, I have a java application consisting of 3 packages & a jar file in the following hierarchy: -Project -classes -src -package1 -package2 -package3 -file.jar The main class exists in package2 and uses classes within file.jar I want the steps to
-
Time costraint on Cost Center (K) relationships
Hi everybody. I would ask for your help about the following problem I'm not able to solve : I defined a new relationship, linking the object K (Cost Center) to a new object I created (ZE). The new relationship is defined as B992 (bottom-up). This rel