Assigning into System parameters

Dear All,
Facing a tedious problem..
In a form i hv taken two text fields,output_type and file_name which iam passing as a user parameter to a report to be generated in excel.
In the report in the after parameter form trigger iam assigning the parameters to system parameters like this..
if :destype = :p_output then
:desformt := 'delimited';
:desname := :p_filename;
:destype := :p_output;
return(true);
end if;
the process is executing fine but the system params
:desformat etc..are not gettn assigned.,even if a show the desname etc by srw.mesage it shows ..screen. But the assignment is important. because
i'll be changing the out_type and file_name from forms at runtime also
i may choose output to be mail and execute the code accordingly.
My question is can the system params be assigned like this or any other alt. method..
The report is generic and should be generated depending on my form parameters
pl let me know,
regards,
Shankar

In the form before calling the report, can you try using SET_REPORT_OBJECT_PROPERTY?

Similar Messages

How DAC decodes its Source System Parameters into Informatica mappings??

Hi All,
I would like to know about "How DAC decodes its Source System Parameters into Informatica mappings??".
Is it an informatica mapping? or through a file? or its internal to DAC server?
Can we say the DAC server to decode it differently i.e. can we costomize the decode process? For example
$$START_DATE - i gave "Custom Format(1950-05-21 01.23.56) @MM/DD/YYYY" at dac - and it decodes as '05/21/1950' but I want it to decode as TO_DATE('05/21/1950','MM/DD/YYYY') is this possible?
Note that the informatica mapping takes the first decoding '05/21/1950' as number and through a sql error.....
Thanks for your time......
DK

Please set the values of $$FILTER_BY_SET_OF_BOOKS_ID, $$SET_OF_BOOKS_ID_LIST in DAC and check if the values get reflected in the parameter files that DAC generates for informatica at run time.
If this does'nt work, see if the BI services were restarted after doing change in the parameter file. The services need to be restarted in order to reflect the change.

How to assign more system memory in PE 10?

PE10 has crashed a number of times and will not allow use of Ken Burns. Searches retrieved information on how to assign more system memory in previous versions of PE, but the methodology explained could not be used for PE10 as the relevant actions could not be located.
What worked in a previous version of PE:
> Edit > Preferences > General
In addition, the guidance suggested 1.5 should be enough but if the recommended amount for PE10 should be different (particularly for Ken Burns), advice would be most welcome.
Thank you.

Welcome to the forum.
What are the complete specs. of your computer, including the OS?
For the Still Images, this ARTICLE goes into much more detail.
Also, for a PC, after one gets past the initial "checklist," in this ARTICLE, there are many links on setting up one's computer for a video-editing session, and for tweaking one's OS for max results.
Good luck,
Hunt

Assign business system

I have created a business system in SLD. When I want to assign this business system to the scenario, I can not find it in the wizard and also not show on Object tab. It is a new business system, I dont assign it to the other scenarios. How to find it?

Hi
You need to first import this business system from SLD into Integration Directory.
Go to objects tab -> right click on "Business System" -> Assign Business System.
In the new window choose your newly created business system and its ready to use now
If your Business system does not show in da new window, refresh the cache,
how to refresh the cache?
Goto ID -
> Environment -
> Clear SLD Cache, try the step of importing it again.
Hope this clears your doubts
Thanks
Saiyog

Passing System Parameters to sqlplus_exec_template.sql

Hey All,
I am running into problems passing system parameters to a SQL Loader mapping from within a shell script, and I hope someone can pick out what I am doing incorrectly. My call is as follows:
@sqlplus_exec_template.sql OWB9204_RT PlatformSchema SQL_LOADER $2 "data_file_name=$DATA_NAME,log_file_name=$DATA_NAME.log" ","
Here is the result:
Stage 1: Decoding Parameters
| location_name=PlatformSchema
| task_type=SQLLoader
| task_name=INTF_FILENAME_LDR
Stage 2: Opening Task
| l_audit_execution_id=152832
Stage 3: Overriding Parameters
| data_file_name%SYSTEM='filename_0501050745.dat'
declare
ERROR at line 1:
ORA-20016: The specified parameter information is invalid
ORA-06512: at "OWB9204_RT.WB_RTI_EXCEPTIONS", line 82
ORA-06512: at "OWB9204_RT.WB_RTI_EXECUTION", line 514
ORA-01403: no data found
ORA-06512: at "OWB9204_RT.WB_RT_EXECUTION", line 54
ORA-06512: at "OWB9204_RT.WB_RT_API_EXEC", line 187
ORA-06512: at line 32
ORA-06512: at line 134
ORA-06512: at line 164
ORA-06512: at line 214
I am using the system parameters defined in Note 292399.1, and I have tried several variations on syntax. Any help would be greatly appreciated.
David

Well, I answered my own question. It appears that even though note 292399.1 lists data_file_name and log_file_name, they are not modifiable at execution using sqlplus_exec_template. Only those parameters modifiable at execution time using the Deployment Manager can be changed. I tested this using BINDSIZE=5000000, and it ran without a problem.

Deletion of user if he hasn't login into system for long time

Hi Experts,
can anyone tell me that does acess enforcer provides nay facility of automatic deletion of those users who haven't login into system for long time.
Please suggest.
Thanks & Regards,
Anubha Pandey

Hi Anubha,
no, Access Enforcer is a tool for assigning/removing authorizations via workflows.
Run a regularly report in ABAP to delete the users that haven't logged on.
Regards
Daniela

Deprecated system parameters

after startup, I have the next error:
alertlog.log
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
local_listener = LISTENER_DWPRD1
remote_listener = LISTENERS_DWHPROD
session_cached_cursors = 500
job_queue_processes = 36
parallel_max_servers = 108
parallel_instance_group = first
parallel_execution_message_size= 16384
hash_area_size = 201326592
background_dump_dest = /oradump/DWHPROD/bdump
user_dump_dest = /oradump/DWHPROD/udump
core_dump_dest = /oradump/DWHPROD/cdump
audit_file_dest = /oradump/DWHPROD/adump
session_max_open_files = 20
audit_trail = TRUE
sort_area_size = 134217728
db_name = DWHPROD
open_cursors = 300
sql_trace = FALSE
star_transformation_enabled= TRUE
parallel_adaptive_multi_user= FALSE
pga_aggregate_target = 1388314624
Deprecated system parameters with specified values:
sql_trace
...

FALSE is default value of this parameter. Since your spfile is on ASM, you can check if you are taking default value this way,
1 select name, ISDEFAULT from v$parameter
2* where name ='sql_trace'
SYS@dev>/
NAME ISDEFAULT
sql_trace TRUEIf ISDEFAULT is TRUE that means this parameter is not explicitly set into spfile.
Then most likely you got the message because the database was started with pfile.

Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

Hi!
I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

I have osx 10.6.8 and have lost the side scroll bars on Safari. When I go into System Preferences there is NOT an "always" option for displaying Scroll Bar. How do I get it them to display again?

When using Safari the scroll bars no longer appear on the right hand side. When I go into System Preferences the option to Always have the scroll bars displayed is NOT there. How/Where do I go to get these to show all the time?

It SHOULD be under the General tab in System Preferences:
(Note that this is a Mavericks screenshot, but it should be there in Snow Leopard, too, if indeed you're still running 10.6.8 as your profile says)
Clinton

Assign Logical System to client 000

I need to install Bw at SAP ECC 6.0, in doing so on the client 000 with the transaction RSA1, present the message that should be assigned System logical customer 000, it does not bring inconvenience to any future activity,
Thanks

Hi Victor,
If you're installing BW you shouldn't use cleint 000, create a new client...
Once you create the client go to transaction SALE and You'll see Create logical system ans assign logical system in the list.
First create a new logical system for the client to use... then assign the logical system to the client.
Regards
Juan
Please reward with points if helpful

Assign Logical System both in GTS and R3

Hello all,
We are using Two different system for R3 and GTS , and defined logical system both systems ( for R3 QR1CLNT100 and for GTS QG1CLNT100 , now do I need to assign logical system both system for clients in R3 and GTS ( I mean at the time of assignment both clients QR1CLNT100 & QG1CLNT100 i have to assign in both systems or only one.   For Feeder system only I need to assign GTS system logical system as QG1CLNT100 vice versa ( for GTS system need to only Feeder system logical client QR1CLNT100)
Thanks in advance for valuable inputs.
Thanks & Regards
Tarun

There are following steps for doing connection between R/3 and GTS
1. Define Logical System
Here you have to define both R/3 logical system as well as
GTS logical system.
2. Assign Logical System.
Here actually when u get in you will see the physical system
detail on which you are logged in , suppose you are on R/3 you will find detail of R/3 system with different clients. Some clinet willcome as default like 00 which is waldrof client the SAP client and other are are those which are created at the time of installation.
Here you have to assign the logical system of R/3 to the physical system client combination on which you looged in.
you will find a field of logical system on the top once you get in detail of the client system combination.
Now here we have assigned the Logical system of R/3 this is required as when GTS will communicate wiht R/3 it willtry to look for R/3 logical system as for RFC connection we always define logical system to which the system will talk.
this configuration we do under Maintain RFC connection for RFC call Tcode SM59
3. Maintain RFC connection for RFC call Tcode SM59.
   Here we define the Target host, and logon detail like
   language , client, user passwaord.
   We need to define the detail for GTS for RFC connection and   so we need here the logical system of GTS.
4. Maintain RF destination for method call
Here again you will require GTS logical system .
5. Maintain ALE distribution here you will require both R/3 and GTS logical system.
Hope it helps
Kind Regards,
Sameer

Problem in assign business systems in IB configuration

Hi ,
I have defined Technical systems,business systems properly in SLD and i also able to import my software components in Integragion Repository. i have defined all the data type , msgs types ,msg interface,msg mappings properly in IR.
But my problem is when iam trying to assign business systems in IB configuration scenario.
Business system list is not appearing in IB configuration.
Thanks
Hari

Hi,
Check the following..
1) Check Whether that BS is already is Assigned to Another Scenario
2) If it is Assigned to another scenario means, goto Objects TAB -
Expand Service With out Party
Business sysemRight click---Add to scenario( Select ur scenario)
3) Do SLD Cache through Envoronment----SLD Cache
once you do this..
1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
2) Say Continue-Say Continue Select ur BS
3) Un check the Check Box Bottom of the Window
go throgh these blogs too..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Thanks,
Vijaya.

ICal writing tons of log messages into system.log

Hi all,
I've got an issue with iCal under Leopard 10.5.1.
Sometimes my syslogd process grabs ~100% CPU time and so I took a look into system.log.
I saw MANY lines like this:
Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.363 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p774
Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.364 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p2754
Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.364 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p288
Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.365 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p2056
Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.366 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p148
Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.367 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p73
Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.497 iCalExternalSync[4230:10b] SyncServices precondition failure in [ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.521 iCalExternalSync[4230:10b] [ICalExternalSync ]Encountered [ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.526 iCalExternalSync[4230:10b] [ICalExternalSync ]NSException name:NSInvalidArgumentException reason:[ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
Any idea how to fix this?
Here's another problem that might be related to this: my "Private" calendar was published in 10.4 but now the webdav server that was used for this is no longer existent (and can't be setup again).
So I wanted to unpublish my Private calendar but this wasn't possible. When trying to unpublish it I get the error message "This calendar could not be unpublished. Authentication information may be incorrect."
If I select the "Cange location..." menu entry in the context menu of the Private calendar I still see the webdav server address and the Login and Password fields are filled. But because this server no longer exists publishing is no longer possible. Which is fine with me.
So, how can I get rid of the publishing? Because I get tons of error messages in system.log, too, for this behaviour. Everytime the system tries to publish this calendar...
Thanks,
Stefan.

I am not much of a help, but I just wanted to say that my iCal just experienced the same problems for the first time today...

How to assign a system to a solution for EWA in SAP Solution Manager 7.1 Solman 7.1

Hello Dear experts,
I am trying to create and generate an EWA Early Watch report, I am configuring a Solution Manager 7.1 since scratch and now I am in the Managed System configuration - Early Watch Alert Management.
I know that in order to get the report the system have to appear in the systems and it has to be assigned to a solution but there is not appearing..
Maybe there is some step that I missed and I have to configure but I don't know which one.
Below you can find screenshot of my issue.
I appreciate your help,
Thank You
Javier Tenorio

Hi Javier,
Please follow the below steps to create solution and assigned to systems.
First assigned the logical system properly.
Execute transaction "SOLMAN_WORKCENTER", click on the tab "Solution Manager Administration", and click on "Solutions" on the left of the screen. In the "Solutions" tab, click on the "New" button to create a new solution.
A window will show up. Enter a name for the solution and select a language and click on "Save Solution"
assigned the system to solution which you have created.
Hope this will solve your problem.
Regards,
Gurpal

Issue with OIOF entry - Assignment of Costing parameters to Maintenance Ord

Dear Friends,
I need to assign some costing parameters to a Plant and Order type using OIOF [assignment of costing parameters to Maintenance orders]. But the plant and order type data in that table is missing [deleted by some means!] .
Now I need to maintain the Plant and order type assignment in this OIOF Transaction, but am not able to do so. Hence could you please let me know how to maintain this plant and order type assigment so that I could enter some costing parameter to the same.
Thanks and regards
Prasad Subramanya

Prasad Subramanya
Once you define the the order type and assgin to the plant, the same will flow to the transaction OIOF, you need not to maintain this seperately.
In OIOF you can only change the cost parameter, the defalut value will be PM01 - miantenance order.
Regards,
Praveen

Assigning into System parameters

Similar Messages

Maybe you are looking for