Assigning transactions to user

Hi,
      I am new to authorizations. I need to assign a user authorization for transaction Sm37 and RSMO.
I think I just have to add the transaction code somewhere... I don't want to change any roles though. Instead of totally assigning a role, can I just assign the two transactions?
can somebody refer me to documentation or just outline the steps?
Thanks.

The intended way of doing this is to create a role in transaction PFCG, add the transactions to the menu of the role, and then maintain the authorization data brought in by those transactions in the authorizations tab of the role.... and then assign the desired / authorized users to the role.
Whether that involved changing an existing role or adding a new one is debatable.
As you might be able to imagine, this has been asked before here ... best practice, in some of our opinions, is to do it like this => How to get hit by the ABAP authorizations bus, and survive to tell the tale - Part 1
Cheers,
Julius

Similar Messages

  • Assign User Profiles and Web Interface Transactions to Users

    Hi EM Gurus,
    Has anyone worked with not standard scenarios in SCEM?
    They are working well but I can't access them on interface web.
    In selection page (search page after logon), where choose tracking scenarios, only standard scenarios appear although I have assigned both scenarios to the user and made same configuration; Assigned and Defined Web Interface Transactions, Configured Fields for User Profiles, Defined User Profiles, Assigned User Profiles and Web Interface Transactions to Users.
    But only Standard Scenarios appear as choice of tracking scenarios that are displayed to the user as a dropdown box on the selection screen after logging on to the Web interface.
    Has anyone accessed not standard scenarios on interface web??
    Help, please!
    Thanks a lot.
    Rodrigo Freitas

    Hello Rodrigo,
    if you have assigned the scenarios to your user in transaction /SAPTRX/UCUSER you must go to the admin page and reload the profile manager.
    /admin in the URL of the WCL instead /ehsearch.
    Afterwards you should see them also in the drop-down box.
    Best regards,
    Steffen

  • Assigning transactions to a user

    Hi All,
    I want to assign 5 transactions to a user where, for 2 transactions the user should have a display option only and for the rest of the transaction he should have the full authorization.
    I know the basics of creating user (su01) and roles (pfcg ), which contain auth. objects followed by profile generation. But in this scenario how can I proceed.        Need your help.
    Regards
    Rajesh

    Of course it does depend on which transactions these 5 transactions are.
    Some tcodes are display only regardless of the access for a specific object checked by the 5 transactions.
    However I agree with the others: the transaction code is not that important (other than it's context for pulling in the authorizations required to actually use the 1 of 5 transactions into the role via SU24 or "case sensitive" for a program based on the transaction context (system field sy-tcode)). Many usefull transactions in SAP care about the authorization object' activity type field values and other application object fields, and most will let you switch to change mode from the display transaction if you have change access - regardless of the transaction (S_TCODE) but sometimes checking other TCD related field ID's.
    Reporting tcodes are often different though: these have the same core checks but other options and objects.
    Both transaction and reporting tcodes often have customizing dependencies as well, so you do not gave to use authorization objects always.
    Rather complicated actually... as are the menus of the transactions from a security perspective....
    Which 5 transaction codes were you specifically asking about?
    Cheers,
    Julius

  • How to see system status in spro. How to assign business transaction to user status.

    Hi All,
    How to see system status in spro. can we change system status in spro for maintenance order.kindly share.
    Also share how can we assign business transaction to user status for maintenance order

    Peter,
    You cannot see the system-status in SPRO.
    You can view the system-statuses via BS23.
    Be warned - it is NOT advisable to change the system-status setting as you may screw-up your system. Remember that many statuses are used across multiple objects and multiple modules.
    PeteA

  • Assign transaction to a user

    Hi,
               I am not much experienced authorizations. I am trying to give authorization to a user for a particular transaction. I guess I have to do that in some PFCG....I am sure this is a simple thing...but can some body refer me to any documentation or just list out the steps?
    Thanks.

    Here are some excellent resources on how to use transaction PFCG and assign authorizations to users.
    Always remember, assign the USER to the ROLE.  This is a good habit, rather than assigning ROLES to USERS.
    Hope this helps!
    http://sap.mis.cmich.edu/46c-help/helpdata/EN/23/07d128f31011d296330000e82de14a/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/52/6714a9439b11d1896f0000e8322d00/content.htm
    http://help.sap.com/saphelp_sm40/helpdata/EN/57/3fc0413f1b6524e10000000a1550b0/content.htm
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci912389,00.html

  • "Assign at least one Web transaction to user" in OER

    When i call the /SAPTRX/EM_START , i get an error "Assign at least one Web transaction to user"
    what is the problem?I dont know how to assign it
    Thanks

    Once the above is done:
    In the same spro sub menu choose
    Assign User Profiles and  Web Interface Transactions to users:
    Use the input help to assign the transactions and profiles to a user, depending on the process that you want the user to perform.
    Eg.
    Process: Delivery Tracking
    Web Interface transaction: PTA10_DELIV
    User Profile: PTA10_DELIV
    Order Web : 1,2,3etc
    I think this should solve your problem

  • 'Assign at least one Web transaction to user'

    Dear Experts;
    I take this message 'Assign at least one Web transaction to user' in OER system.Does it fall out because of the customizing ıf so; what should I do?
    Thanks a lot;

    I am not sure if this will work for you, but have you tried out the following step:
    You must perform this step to ensure that fields for the web user interface are configured correctly
    spro --> Event Messages, Status Queries and Web Interface --> Web Interface --> Configure Fields for User Profiles
    and Save
    Do not do any additional settings in here however this is needed to ensure that the WCL (Web Communication Layer) parameter dictionary is updated with the parameter fields
    Once the above is done:
    In the same spro sub menu choose
    Assign User Profiles and Web Interface Transactions to users:
    Use the input help to assign the transactions and profiles to a user, depending on the process that you want the user to perform.
    Eg.
    Process: Delivery Tracking
    Web Interface transaction: PTA10_DELIV
    User Profile: PTA10_DELIV
    Order Web : 1,2,3etc
    I think this should solve your problem

  • How to take a report for the assigned transaction and activity in a role

    Hi Colleagues,
    I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
    Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
    Please suggest how to take this information.
    BR,
    Jai

    Hi Jaikumar from the post :
    I think you have reached the state of finding the USER to ROLE relationship
    Take the output to an excel,
    COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
    insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
    It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
    This is one of the ways to do , there are many other ways to do it.

  • Problem in assigning roles to users

    Hi
    I created Role in EP, which i want to assign to the users. i assigned that role to user. the user i not able to access the particular iviews. i attached some R/3 transactions iviews to that role. it says unable to lookup the system or system alias. when i assign that role to me, i'm able to access that iviews(R/3).
    i have superadmin role permissions.
    what default roles and permissions need to assign for users.
    suggest me
    thx
    pradeep

    Hi Pradeep,
    In SP9 apart form creating a System, we need to assign permissions for users.
    Follow this path:
    System Administration -> Permissions -> <select your System in Portal Content> -> Open Permissions <on right click>. This would take you to the Permission Editor.
    Here you need to add the user and assign permissions.
    Please check this and let me know if its working.
    Awaiting Reply.
    Warm Regards,
    Ritu

  • How to get the list of roles assigned to a user in all the child systems

    how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM

    Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
    Krysta

  • Calling Transaction through User Decision step in workflow

    Hi all,
    Pls help me calling a transaction through User Decision step in workflow. I have attached two buttons to my User decision and the one of the outcomes to a task where I am calling the transaction through a method of BOR. But the problem is I am unable to see the transaction when I press the button on my User Decision at test run.
    Can you ppl let me know how can I achieve this?
    Pls reply ASAP...
    Thanks
    Sangharsh

    Hello Sangharsh ,
    Please Check the paramater of of the method which you define.
    e.g. I define CALL_TCODE_CJ03 method
          which have the parameters FLAG,ProjectDefinition,WBSElement2,User
          with export, import checkbox.            
    Pass the paratmeres in programs
    e.g.
    BEGIN_METHOD CALL_TCODE_CJ03 CHANGING CONTAINER.                      
    DATA:                                                          
          FLAG(1),                                                        
          PROJECTDEFINITION TYPE PROJ-PSPID,                              
          WBSELEMENT2 TYPE PRPS-POSID,                                    
          USER TYPE USR21-BNAME.                                                                               
    SWC_GET_ELEMENT CONTAINER 'FLAG' FLAG.                              
      SWC_GET_ELEMENT CONTAINER 'ProjectDefinition' PROJECTDEFINITION.    
      SWC_GET_ELEMENT CONTAINER 'WBSElement2' WBSELEMENT2.                
      SWC_GET_ELEMENT CONTAINER 'User' USER.                                                                               
    GET PARAMETER ID 'PSP' FIELD PROJECTDEFINITION.                       
      GET PARAMETER ID 'PRO' FIELD WBSELEMENT2.                                                                               
    SET PARAMETER ID 'PSP' FIELD PROJECTDEFINITION.                       
      SET PARAMETER ID 'PRO' FIELD WBSELEMENT2.                             
      CALL TRANSACTION 'CJ03' AND SKIP FIRST SCREEN.                                                                               
    SWC_SET_ELEMENT CONTAINER 'FLAG' FLAG.                              
      SWC_SET_ELEMENT CONTAINER 'ProjectDefinition' PROJECTDEFINITION.    
      SWC_SET_ELEMENT CONTAINER 'WBSElement2' WBSELEMENT2.    SWC_SET_ELEMENT CONTAINER 'User' USER. 
    END_METHOD.
    I hope it will help you.
    ***Assigning points is the way to say thanks in SDN.***
    Minaxi Shah

  • There is no valid business partner assigned to your user

    Hello,
    I have trouble managing change requests and would greatly appreciate some help.
    I am able to create an urgent correction to later authorize it and set the automatically created request to "In Development" status, but after this I get the following message and can not continue to the Created status.
    Type: Stop sign
    Reference object: Header Data
    Message text: There is no valid business partner assigned to your user
    I would also like to know where (transaction) and how to eliminate change requests.
    My user was assigned to me with the following roles:
    SAP_CM_REQUESTER
    SAP_CM_CHANGE_MANAGER
    SAP_CM_DEVELOPER_COMP
    SAP_CM_TESTER_COMP
    SAP_CM_OPERATOR_COMP
    SAP_CM_ADMINISTRATOR_COMP
    Do I need any additional roles? Must I assign a BP to my user? If so, where (transaction) and how (will I need aditional priveleges)?
    Regards,
    Henry

    Thank you Arun,
    Yes, I am referring to SOLMAN. Where must I do this, what transaction? I tried BP transaction but it only permits me to establish relations between BP's and not with users. I am sorry, but I am fairly new to SOLMAN and need a little more direction. Maybe if you have a good SOLMAN guide for beginners, I would deeply appreciate you sharing it with me.
    email:[email protected]
    Thank you again Arun.
    regards,
    Henry

  • Authorization Object assigned to an User

    Hi
    I am working on a development where I have to identify value of authorization object assigned to an user. This user will be assigned to org plan, to which a business role will be assigned.
    Is there any standard FM or table linkage logic that I can use?
    I have found FM SUSR_USER_AUTH_FOR_OBJ_GET but it seems that it is relevant from GUI perspective.
    Thanks & Regards
    HM

    Hi,
    Please use transaction code SU56, switch to the user in question.
    You can see all objects or the required object and assignment of values to the user.
    Regards,
    Gowrinadh

  • Download transactions in user menu in Excel

    Hello,
    Can you please help in finding a way to download transactions which are in user menu in to an excel sheet.
    Please help me.......
    Very thanks
    Sujith

    Very Simple!!!
    Why do you make this complicated...
    The transactions in user menu is pulled from the transactions which are assigned to the user. The roles contained the transactions.
    You can enter into SUIM and there are lot of options which you can choose - User by Complex Selection Criteria or Transactions Option.
    Let me know if it works...
    Thanks and Regards
    Arun R

  • How to find the plant assigned to a user profile

    Hi All,
    i am new to SRM but supporting it. so pls help.
    how to find the plant assigned to a user profile?
    i need to assign a address code to a company code-plant-building code so that the shipping address should come as a default in the shopping cart.
    i found many plants in the PPOMA_BBP  transaction but could not understand which plant i should take for the abhove assignment.
    Thanks in advance.
    Regards,
    Anubhab

    Hi,
    There is one check box in transaction for default value for every attribute. And a particular attribute there has to be a default value.
    Use FM BBP_GET_ATTRIBUTES_AT03 to fetch all attributes for a particular shopper. Then check for the particular attribute witha default value.
    In this way you will get default plant for that shopper can further requirement can be completed.
    Regards,
    Brajvir

Maybe you are looking for

  • Possible encoding problem in sql queries

    I am using mac os. I've set everything possible (files, eclipse workspace, database collation, mysql charst) to utf-8 encoding. Still when i send a query, smthing like SELECT * FROM suppliers WHERE LOWER(name_post)='акцент' using java, empty resultse

  • Help: Message 'Object do not exists' in SBWP

    Friends, When I give a double click in na work item, the sap give me a message on the status bar: 'Object do not exists'. Earlier than this test, the user had tested and it ran all right. After that, I transported a request with a format of report co

  • Script error "object expected"

    Hello, I have tried everything I could find on the internet and I still get script error message "object expected" "code 0" in the script http://127.0.0.1:1133/app/_js/adobe.js during installation. After that the installation just hangs and there is

  • ODI Hyperion Planning Reverse Transaction The Screen freeze and Hang

    Hi, There is a problem with reverse transaction via RKM Hyperion Planning KM. In desinger application I will click reverse button, the application is hang up and the screen is freezed. I completed the setup steps. How can be solved the problem? thank

  • New call features not active

    Hi, I have ordered 2 features online  with my phone line recently: all day free calls to uk land lines £7 intenational inclusive calls £5.50 it doesn't look like these have become active even though Ii have ben send conformation emails. When I look a