Assignment of Source System in quality after transport
Hi Experts,
We have implemented the Inventory management standard flow in Development,
Now to tell you, we have multiple landscape over here,
Depending on the project, and the fesiblility for the client, the tranport layer is been decided,
But for sure we have multiple source system,
By multiple source system, i mean not the other components like R/3, SRM or APO,
but for R/3 itself we have multiple boxes at each layer,
Now when transported to quality,
the standard objects are reflecting after few errors corrected and re transports,
But the source system which it has picked for the BF BX and UM datasource is not that i require according to the transports landing for the R/3 developments,
AT DEVELOPMENT LAYER,
BW development is GDA, which is having the source system connection to development R/3 (GD0),
AT QUALITY
We have BW as EQ3,
For R/3 we have EQ0 and NR0,
All the transports have reached in the respective target quality system,
But the data sources are having source system connection to NR0 and not EQ0,
I want it to be EQ0 as the data lies over there.
How do i resolve this ?
Thanks and should be appricated for your efforts in helping.
Hi Daljeet,
You should set the Source system Conversion option in Transport Connection before Transporting the objects to QA and PRD.
You can do this using the button 'Conversion' next to the button 'Source System Assignment'. Here you can specify the Target source system name after the Transport.
If you want to change all the assignments from NR0 to EQ0, this article will be helpful for you.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81
Get the help of your BASIS team also.
Refer this thread.
Re: source system in RSA1 is diiferent to the datasource in infoprovider
Similar Messages
-
Source system RFC fails after transport
Hi all
in our QA system any transport containing a process chain causes the RFC connection to the source ECC6 system to fail after too many logon attempts.
This doesn't happen when we send the same transport to production.
Any ideas?
Regards
HayleyHi
thanks, but I had already checked out this note. This refers to the post processing of the transport on BW of client 000 logging onto the BW client to carry out changes, not the RFC connection to the BW ECC source system.
The transport goes through ok, and the process chain can be activated, however at this point we always notice that the ECC source system connection fails with an RFC error, as soon as we get the password reset and changed in SM59 it works ok. -
Conversion of source system names --- error in transport
hi
i want to transport my object from Dev111 to Quality222
but the transport ended up in error 8
it gave the error...
Source system PRODUCTION333 does not exist
I am confused,
shouldnot it should give error related to Quality system ???
how should be the mapping in Source system names?
after research it seems it should be maintained in
RSA1-TOOLS-mapping of SOURCE SYSTEM NAMES.
i have following systems...
BW- DEV111 QUTY222 PDN333
R3 DEV121 QUTY242 PDN363
What should the entries look like in which systemLandscape is -Transport should be send from Deve-Quality---Production
BW....................................
DEV111 QUTY222 PDN333
R3.....................................
DEV121 QUTY242 PDN363
CAN you advise if the entries SHOULD look like below in Quality and Production System???
Quality system should have entries like:
bw DEV111.............. bw Quality 222
r3 DEV121................ bw Quality222
Production system should have entries like:
bw Quality222.............. bw Production333
r3 DEV242................ bw Production333
Q1 ......IS THIS HOW ENTRIES SHOULD BE IN Quality & Production system??? -
How to assign the source system to the virtual provider
Hi
How to assign the source system to the custom virtual provider with services in BW 3.5 ?
Regards
PWnukHi PWnuk,
Refer this link on how to implement a virtual provider with services.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4752ec2d-0a01-0010-ecb0-a145cf2e3e92
Hope this helps
Regards
Karthik -
Source System Does Not Exist - Transport Problem
Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300 is R3 DEV
LRQCLNT700 is R3 QA
LBDCLNT100 is BW DEV
LBQCLNT700 is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System Target System
LBDCLNT100 (BW Dev) LBQCLNT700 (BW QA)
LRDCLNT300 (R3 Dev) LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.Thanks Edwin
I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA. -
Hi,
I have a question regarding source systems.
BACKGROUND: Let's say we have connections to two source systems in Development (DEV): DCLNT100 and DCLNT200. This creates double datasources and transformations to the DSOs.
We now transport and use the "Conversion of logical file systems". Subsequently, we have in Quality (QTY) also two source systems, QCLNT100 and QCLNT200, which is what we want.
QUESTION: We now want to enter Production (PRD). However, we want to connect datasources to only one source system, PCLNT100. How can we manage this? We don't want to end up with two sets of datasources and transformation rules in PRD, because there is only one source system client (PCLNT100).
Points will be awarded for useful suggestions!
Best Regards,
RikardHello Rikard,
How come you have two dev & qa system that points to a single productive system? That doesn't make much sense to me unless there's something I don't get.
What's the point of defining both dev & qa systems if at the end you only wants one source? Would not it be much simpler to defined on DEV1, QA1 and therefore PROD1 ?
Maybe if you gives us more information, we'd be more able to help you on that matter.
Regards,
John -
With out source system creation we have transported all the flow
Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran KumarHi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet -
Transfer rules to the new source system not visible in Transport connection
Dear All,
Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I have also collected them in a Transport request.
Now when I am checking the entire flow in Transport connection, it shows me the transfer rules pointing to the old system only. That is, in RSA1 it shows the new system assignment. But in Transport connection not.
What I have to do so that I can crosscheck in Transport connection all my objects having transfer rules to new system ?
Regards,
SrinivasI think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda -
No username of Source system is avbl after livecache system copy
Hi Experts
I have done a livecache system copy from the source system to target system. Here the steps are
Assume my Source SYstem Livecache is RP1 and Target System livecache is RS1.
1. Taken Source system livecache DATA and LOG Area backup RP1.
2. Defined the same source system backup medium name in Target System (RS1 and moving the Source system Liveacache backuped files to Target system and defined the medium name as per that)
3. put the livecache db_admin mode
4. db_activate RECOVER <medium_name>.
5. recover_start <log_medium_name> LOG <nnn>
6. db_online.
Here we faced that
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
So we activated the SUPERDBA as " db_activate SUPERDBA,<password>
then it came to online. and afterwards we have used the load_systab command to load the tables.
BUT we could not find any Source System name like "RP1ADM" in the tables of the livecache database. Only there are CONTROL,SUPERDBA username availbale. Usually there will be also the source admin name . I dont know why it is missing
Before a month we have done livecahe restore same as now in that time we got the source system name admin also. ( RP1ADM) and also tables which owned by RP1ADM. alos i could find APPSYSPARAM table and the instance also registered.
But now in this restore we could not find the above.
We followed the same procedure and there is no change in the steps also.
Could anyone help me...
Regards
balaHello Bala,
1. As I wrote you already, the notes:
886103 System Landscape Copy for SAP SCM
877203 Post steps after the Homogenous liveCache copy using backup/
457425 Homogenous liveCache copy using backup/restore
has all recommended steps to do, when you will run the u201CSystem Landscape Copy for SAP SCMu201D
2. If you run the u201CHomogenous liveCache copy using backup/restoreu201D you should pay attention to the note 457425. After you imported the complete data backup < step 2. > you need to update the system tables.
To update the system tables you need to know the correct database SYSDBA user & password.
After you restored the databackup of the source database, start the database online & run u201Cselect * from usersu201D SQL command to see the SYSDBA user. Then check that you know the DBA user ( DataBase Administrator ) & password of the source database instance => Open the SQL session with this
user & password.
Example:
after db_activate recover <medium_name>
login as control,password
db_online
sql_execute select * from users
sql_connect superdba,<password of source system>
If you didnu2019t get error with the last command, then you could update the system tables with the superdba,<password of source system> using load_systab command.
The system tables will be updated & the correct SYSDBA user & password will be updated in *.UPC file.
3.
user_sysdba:
You make the database system administrator known to Database Manager. It is only necessary to use this DBM command if the database administrator is not known or is incorrectly known to Database Manager.
u201CI have tried like this
after db_activate recover <medium_name>
login as control,password
db_admin
user_sysdba superdba,<password of source system>
db_onlineu201D
You could update the .upc files with the wrong SYSDBA user password u2026
You was lucky, that you knew the correct SYSDBA user and password of the source database.
Example < NLK is my local database >:
A. I could update the .upc file with wrong password of SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba superdba,test
OK
dbmcli on NLK>db_online
OK
dbmcli on NLK>load_systab
ERR
-24909,ERR_DBAUNKNOWN: SYSDBA unknown
dbmcli on NLK>exit
B. I could update the .upc file with wrong SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba test,test
OK
dbmcli on NLK> user_get test
OK
u2026
dbmcli on NLK>sql_connect test,test
ERR
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
dbmcli on NLK> dbmcli on NLK>sql_connect superdba,admin
OK
I could connect as test,test; but the test user is NOT SYSDBA user u2026
dbmcli -d NLK -u test,test
dbmcli on NLK>
Itu2019s recommended to user the load_systab command, so the .upc files will be updated with the correct SYSDBA user/password or
you will get error.
4. http://maxdb.sap.com/doc/7_7/86/68627a1bc642e6a6f73d3bc7a55fe1/content.htm
You got error:
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
The automatically updating the system tables, according to the default value, is switched on.
After you will run the update system tables with the correct SYSDBA user & password the *.UPC file will be updated,
and with the next liveCache restart you will not get this error.
5. See more information in the MAXDB library:
http://maxdb.sap.com/doc/7_7/45/11cbd6459d7201e10000000a155369/content.htm
Thank you and best regards, Natalia Khlopina
Edited by: Natalia Khlopina on May 19, 2010 2:58 PM -
Source System Connection Issue after BI 7 Upgrade
Hi all,
We have just upgraded from BW 3.1 to BI 7.
After the upgrade, I checked the connection to our R3 4.6 source system.
It is now saying the following message:
Source system XXX is marked as inactive in BI.
Check failed for RFC connection XXX ; check destination
After going through the RFC connection, I tested the connection for this source system. It said OK. While doing the authorization test, it said: "Name or password is incorrect. Please re-enter".
The thing is that our name & password ARE correct definitely.
Is there any issues post upgrade because authorization stuff between R.3 4.6 (PI 2004.1 SP15) and BI 7?
Any ideas?
Thank you
chrisHi,
as from NW7.0, passwords are case-sensitive.
If you define the passwords in the RFC in uppercase, it will work.
This is a problem when you link an 'old' (not NW 7.0) system to a NW 7.0 (as in this one, passwords are case-sensitive). -
BI Technical Content datasources not found in Quality after transport
HI All
I am trying to implement BI technical Content for Admin Cockpit. I was able to implement Technical content Infocubes successfully in development box but when I collected the objects and transported to Quality(collected oblects in seperate requests: info objects in one request, datasources in one request, infocubes, transfer rules and updated rules in one request), I am not able to find the datasources in quality in myself sourcesystem even after repication. but the transport for technical content datasources is successfull. The following are the datasources:
Comment Entry: Released
DataSource Replica
0TCT_DS01 D17CLNT208
0TCT_DS02 D17CLNT208
0TCT_DS03 D17CLNT208
0TCT_DS11 D17CLNT208
0TCT_DS12 D17CLNT208
0TCT_DS21 D17CLNT208
0TCT_DS22 D17CLNT208
0TCT_DS23 D17CLNT208
can anyone tell me why I am not able to find the datasources in Quality after successfull transport.
We are on SAP_BW 700 SAPKW70016 SAP NetWeaver BI 7.0.
thanksthanks for your quick responce. I was not able to collect the datasources so I had to manually input them in the transport request. But it worked.
thanks once again. -
How to delete old source system assignment and assign new source system.
Hi Experts,
I have bunch of datasource which are pointing to source system A (when I see it in RSA1). Recently all the datasources which are in source system A has been moved to source system B.
Now I have replicated all the datasources from the source system B. But in RSA1, still I am seeing the datasources which are pointing to sourcesytem A. I want this to be pointed to source system B.
Is there a way to do this?. I have searched in forum and found that this ned to be done manually. Do i need to do it for all the datflows? Is there any thing we can do when running BDLS?.
Please let me know if you need more inputs.
Thanks a lot for you suggessions. Eagerly waiting for valuable suggessions.
Thanks and Regards,
Saravanan Payani.Hi Anindya,
Thanks for your quick reply. I want to keep the data what ever there in the cube as of now. From now on I want to extract data from new source system.
Basis team ran the BDLS but i don't see any changes. Still my datasources are pointing to OLD source system.
Background : I have an infocube for which the datasourec is ZCRM_MKT_001, which is available at source system IRDCLNT001. Now the above datasource has been moved to new source system IRXCLNT001. As my datasource is moved to new source system, I want the data from the new source system.
My issue : But when i expand the data flow of the infocube in RSA1to the lowest node, against the datasource i can still see the source system as IRDCLNT001 (which is old) under 'Object Information' column. I want this to be pointed to my new source system that is IRXCLNT001.
Is there any way to arrive at this?.
Thanks for your time on this.
Thanks and Regards,
Saravanan Payani. -
Problem in activating Process chain in Quality after transport
Hi All,
We have moved a set of process chain to Quality system.
When tried to activate the Process chain it is showing error in DTP.
The DTP name is same as in the Dev system.
So, we tried moving the DTP alone in another transport request.
Still the error exists. We also tried moving the process chain again.
We had tried importing only the structure and also the entire flow again.
Nothing worked.
Please suggest some solution.
Thanks in Advance,
GeethaThanks for yor reply.
Suman,
I have checked the Object Changeablity now in Dev system, I found it like Not changable for DTPA.
The DTP from DSO to Cube is fine, but we have problem with the DTP from DataSource to DSO.
Also, in the dev system when i clicked on Object Changeablity I get a popup like "System can be changed; settings not necessary".
Please suggest me like what must be done.
Prashantk & Arvind,
We imported the Process Chain along with the DTP first and we faced the problem.
So we imported the DTP alone again, but still we had the problem.
Again we imported the Process Chain after importing the DTPs.
So what i feel is DTPs must be there in the Quality, but why we have the problem persisting.
That too only for DTP from Data Source to DSO but not for the DTP from DSO to Cube.
Regards,
Geetha
Edited by: Geetha Devi Ramalingam on Jul 12, 2011 9:43 AM -
Webservice Data Source is Not Overwriting after Transport
Hi,
I have a Webservice Data Source which is loading XML based Data to DSO & Then to Infocube.
In development I it is working fine even Loading Delta perfectly. Then moved it production.
Again due to some client request I have made changes in Web Service Data Source & DSO & Infocube.It is also worked fine in Development. Again moved to production.
But after moving to production all objercts of DSO/Infocube changes are fine. Even Transformation/DTP is as it is with Development for upload from DSO To Infocube.
Issue : The New Webservice datasource is not overwriting Old one, same also applies Transforamtion/DTP too.
I need How to Overwrite it Datasource/Transforamation/DTP with new objects of same in Development.
Please suggest.
Regards,
SubhadarshiHello Prem,
I think you might be working on BI 7.0 and this datasource you are talking of is a 3.x datasource?
I have observed that when we activate a 3.x datasource in 7.0 system and replicate it in BI, it shows a modified status, but when you create a dataflow above it it becomes active. I think the datasource you have sent to production has no dataflow above it. Send the dataflow above transports for the datasource and it will get activated.
Please let me know if you need any more information.
Regards,
Pankaj -
SM30 issue in Quality after transport
I have 18 fields in my custom table and there is a TMG for this table. In the dev system, I see all the fields in SM30, but after moving to QA, I see only 12 fields. Please help me in what could be the issue.
I think you should check if this table has any Request that was not transported to QA.
possibly be the reason.
as a solution you should go up the package from the table and create a Request for it and carry it to QA.
Maybe you are looking for
-
Test environment on Linux BOXI R3.1
Hi all, i m planing to create a test environment for BOXIR 3.1 on VMWARE (Leptop). i will be thankfull for any best practice tips for this installation .. Thanks
-
what is my apple user name
-
Clicking "Mail" opens Applications Folder
This used to happen sometimes on Tiger, on a different machine. Clicking on Mail in the doc doesn't open Mail, but does open a new Applications folder window. Restarting fixes it (so far) but it's worrying. Why does Mail keep doing things like this?
-
I am not able to download an album that I pre-ordered
I pre-ordered it and they all the songs say purchased but I don't know how to download them.
-
How to close message search my iphone?
Yesterday, I had to use the app "search for may iphone" to localize my macbook pro, so I found it and started to use. Then I didn't use the ipad (where I run the app) until today. For my unfortunately surprise, a message of alert "Thiago's macbook pr