Assignment of source systems

Hi,
I have a question regarding source systems.
BACKGROUND: Let's say we have connections to two source systems in Development (DEV): DCLNT100 and DCLNT200. This creates double datasources and transformations to the DSOs.
We now transport and use the "Conversion of logical file systems". Subsequently, we have in Quality (QTY) also two source systems, QCLNT100 and QCLNT200, which is what we want.
QUESTION: We now want to enter Production (PRD). However, we want to connect datasources to only one source system, PCLNT100. How can we manage this? We don't want to end up with two sets of datasources and transformation rules in PRD, because there is only one source system client (PCLNT100).
Points will be awarded for useful suggestions!
Best Regards,
Rikard

Hello Rikard,
How come you have two dev & qa system that points to a single productive system?  That doesn't make much sense to me unless there's something I don't get.
What's the point of defining both dev & qa systems if at the end you only wants one source?  Would not it be much simpler to defined on DEV1, QA1 and therefore PROD1 ?
Maybe if you gives us more information, we'd be more able to help you on that matter.
Regards,
John

Similar Messages

  • How to assign the source system to the virtual provider

    Hi
    How to assign the source system to the custom virtual provider with services in BW 3.5 ?
    Regards
    PWnuk

    Hi PWnuk,
    Refer this link on how to implement a virtual provider with services.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4752ec2d-0a01-0010-ecb0-a145cf2e3e92
    Hope this helps
    Regards
    Karthik

  • Assignment of Source System in quality after transport

    Hi Experts,
    We have implemented the Inventory management standard flow in Development,
    Now to tell you, we have multiple landscape over here,
    Depending on the project, and the fesiblility for the client, the tranport layer is been decided,
    But for sure we have multiple source system,
    By multiple source system, i mean not the other components like R/3, SRM or APO,
    but for R/3 itself we have multiple boxes at each layer,
    Now when transported to quality,
    the standard objects are reflecting after few errors corrected and re transports,
    But the source system which it has picked for the BF BX and UM datasource is not that i require according to the transports landing for the R/3 developments,
    AT DEVELOPMENT LAYER,
    BW development is GDA, which is having the source system connection to development R/3 (GD0),
    AT QUALITY
    We have BW as EQ3,
    For R/3 we have EQ0 and NR0,
    All the transports have reached in the respective target quality system,
    But the data sources are having source system connection to NR0 and not EQ0,
    I want it to be EQ0 as the data lies over there.
    How do i resolve this ?
    Thanks and should be appricated for your efforts in helping.

    Hi Daljeet,
    You should set the Source system Conversion option in Transport Connection before Transporting the objects to QA and PRD.
    You can do this using the button 'Conversion' next to the button 'Source System Assignment'. Here you can specify the Target source system name after the Transport.
    If you want to change all the assignments from NR0 to EQ0, this article will be helpful for you.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81
    Get the help of your BASIS team also.
    Refer this thread.
    Re: source system in RSA1 is diiferent to the datasource in infoprovider

  • How to delete old source system assignment and assign new source system.

    Hi Experts,
    I have bunch of datasource which are pointing to source system A (when I see it in RSA1). Recently all the datasources which are in source system A has been moved to source system B.
    Now I have replicated all the datasources from the source system B. But in RSA1, still I am seeing the datasources which are pointing to sourcesytem A. I want this to be pointed to source system B.
    Is there a way to do this?.  I have searched in forum and found that this ned to be done manually. Do i need to do it for all the datflows? Is there any thing we can do when running BDLS?.
    Please let me know if you need more inputs.
    Thanks a lot for you suggessions. Eagerly waiting for valuable suggessions.
    Thanks and Regards,
    Saravanan Payani.

    Hi Anindya,
    Thanks for your quick reply. I want to keep the data what ever there in the cube as of now. From now on I want to extract data from new source system.
    Basis team ran the BDLS but i don't see any changes. Still my datasources are pointing to OLD source system.
    Background : I have an infocube for which the datasourec is ZCRM_MKT_001, which is available at  source system IRDCLNT001. Now the above datasource has been moved to new source system IRXCLNT001. As my datasource is moved to new source system, I want the data from the new source system.
    My issue : But when i expand the data flow of the infocube in RSA1to the lowest node, against the datasource i can still see the source system as IRDCLNT001 (which is old) under 'Object Information' column. I want this to be pointed to my new source system that is IRXCLNT001.
    Is there any way to arrive at this?.
    Thanks for your time on this.
    Thanks and Regards,
    Saravanan Payani.

  • Error while assigning source system to SAP Remote cube

    I need to do a query using remote cube and the source sys is flat file.
    it wont let me assign the source system to the remote cube.
    the r/3 system icon is seen next to the remote cube technical  name...
    I can't  see my flatfile source system
    can somebody help me.

    Hello Kiran,
    I don't think its possible to use Remote cubes for PC_FILE or FLAT FILE as Source system.
    You can use Virtual Providers in these different scenarios
    Virtual Providers based on DTP => used for SAP source systems
    Virtual Providers based on BAPI => used for non-SAP or external systems
    Virtual Providers bsaed on Function modules => You use this VirtualProvider if you want to display data from non-BI data sources in BI without having to copy the dataset into the BI structures. The data can be local or remote. You can also use your own calculations to change the data before it is passed to the OLAP processor. This function is used primarily in the SAP Strategic Enterprise Management (SEM) application.
    Use InfoObects as Virtual Providers
    Your case is none of these.
    More details can be found under this link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/84/497e4ec079584ca36b8edba0ea9495/frameset.htm

  • Remocute ??? how to assign to a source system

    hi all,
    Created an SAP RemoteCube for InfoSource 0CO_OM_CCA_9 in the customer system by using the proposed characteristics and key figures from InfoSource 0CO_OM_CCA_9.
    then i tried to assign a relevant source system to this RemoteCube but i am not to able to assign my source system,bcos it is in disabled mode... ..
    Any way to assign my source sytem??
    Ganesh

    am following the below mentioned document to work on Reconciliation scenario.
    but am not able to assign my source system to my remotecube... you may find the actual screen shot in the 15th page of this document.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
    Ganesh

  • Inconsistent Dev System: Infosource assigned to incorrect Source System

    Hello all
    Our Development box contains inconsistent assignments of infosources to source system.
    When I compare the dev, quality and production boxes I find:
    > Quality and Prod are consistent and all infosource systems are assigned to correct source systems - all loads execute as expected.
    > However I find ips defined in the process chains in Quality and Production under incorrect source systems in the Development box.
    > Also, the inconsistencies are varied for ex: SALESORG_ATTR is assigned to source system Y, while SALESORG_TEXT is assigned to source system X, while 0CUSTOMER_ATTR is assigned to source system Z ( where Z is the correct source system).
    I have not been able to figure what lead to this inconsistency except that I am aware that there were plugins installed and some refreshes done followed up by BDLS.
    I did try having BASIS execute BDLS to convert all logical systems X to Z ( but there were errors in the log stating that destination Z already exists - which is correct since for ex 0CUSTOMER_ATTR is assigned correctly to source system Z)
    I was considering the following to rectify this situation:
    1> Make the rectifications manually
    1a> Identify all the infosources in all the process chains in quality/production
    1b>Manually reassign all infsources/datasources to the right source system
    1c>Check all the mapping rules (transfer rules) and ensure they are same as quality/production
    1d> Activate the transfer rules
    1e>Create infopackages
    1f> Transport the ips to quality and reassign them to the process chains.
    > This is a very labourious task and invovles high risk due to manual effort
    2> Refresh from quality into dev
    2a> Recreate the transport routes
    2b> Resynchronize all the loads with the R3 dev box
    > This would cause loss of version history and therefore not recommended by SAP
    3> Rollback to a restore point
    3a> We would need to find whether we maintain a restore point in the past before which the system were consistent.
    3b> Reimport all the transports from the restore point till date
    4> Rerun BDLS
    4a> This might involve deleting all occurences of source system Z from the dev box
    Please advise what would be the best approach / if theres a better way to address this issue.
    Thankyou
    Edited

    Hi,
       Goto RSA1 in yy BWQ system.
    In the Menu ---> Tools --->  Mapping of Source System Names ( Shift + F6)
    Change the Target Source System as BWP server.
    Now move the transport to BWQ. Your BWP will be assigned as source system.
    Regards,
    Balaji V

  • Source system Assignment for Virtual Cube

    HI,
    I transported infosource and transfer rules to production, but source system is not transported. if i am right i think i need to assign source system(prd) manually. but in prd all objects are not changeble, then how can i assign the source system to infosouce.
    Regards
    Rajini

    HI,
    I transported infosource sucessfully to production , but when i am trying to transport transfer rules , giving warning source system is not transportable. this is happening with remote cube only. all other normal transports are fine.
    i think there is a special way to transport TR for remote cube. pls. help me.
    Rajini

  • Business Content Source System Assignment???

    Hi Gurus,
    i am installing Business content and after going thru few posts in this Forums i have been hearing about Source system assignment in the Business content screen.
    but when ever i installed i never really used this option and we have only one R/3 source system
    Can anybody explain me its functionality please
    thankyou
    harish

    When you activate Business Content, DataSources from source systems are assigned to InfoSources in SAP BW. If you do not select a source system, all source systems are automatically assigned. If you have several source systems this may take a lot of time because transfer rules have to be activated for each DataSource from each source system.
    However an assignment of a DataSource to an InfoSource may not be necessary for all existing Source systems.
    Assign only the source systems you need to load data from for the Business Content Objects that you are going to activate.
    You can subsequently change the selection you made.
    The assignment of source systems is only relevant for transfer rules, DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.

  • Not able to find Source System in BI 7......

    Hi All,
    I am working on BI 7
    I am exctracting the data from Flat File Source System like SMID(Characterstic) and PQTY,SALE,PROFIT as a KeyFigures
    I have taken SMID as Characterstic and PQTY,SALE,PROFIT as a KeyFigures..
    I hav created InfoObject Catalog for Characterstic and Keyfigures...
    I Created a Application Componenet and Assigned Objects to InfoSource also...
    But i struckked while assigning the Source System to the InfoSource...
    I am not able to find how to assign the Source System like we do in 3.0b,3.1c & 3.5..
    Can anybody tell me the Step by Step Navigation procedure for to assign Source System to the InfoSource and Other Things also....
    Regards,
    Kiran Telkar

    Hi,
    These are the settings needed for the broadcaster:
    http://help.sap.com/saphelp_nw70/helpdata/en/55/1b9940ccd42a54e10000000a1550b0/frameset.htm
    Eddy
    PS. Reward useful answers and earn points yourself

  • Change source system in Infosource

    Hi
    I am working on BI7. I have one isse. For an infosource source system has been assigned to client 100. I would like to change it to 200. Pl let me know how to make this change.

    Hi
    I didn't get your question,how a infosource is assigned to source  system,your data source will be assigned to source system and your infosource and data sourece will be assigned to each other..
    delete the datasource from source system 100 and create a data source in 200 and assign it to your infosource(i am considering both 100 and 200 source systems are assigned linked to your BW system via RFC(SM59))..
    Hope it helps
    Thanks
    Teja

  • How to change the ECC Source system in SAP BI

    Dear Experts,
    In my BI development system instead of showing ECC development system as a source system it is showing ECC production system.
    Now in my BI system I want to change the source system from ECC Production to ECC development.
    Kindly explain me step by step to change the source system from ECC Production to ECC development.
    Regards,
    Suresh.

    Hi,
    Ask your basis team to change source system entries.
    They knows how to assign logical mappings.
    Tx - BDLS.
    Tables - RSLOGSYSMAP.
    Try this way.
    Bw, Tx - RSA1-->source system, Menu Tools - Conversion of logical system name and Assignment of source system to source system ID.
    Thanks

  • Recover from source system deletion

    Hi experts,
    Our source system assignment to ECC was accidentally deleted which subsequently deleted the transfer stuctures/rules.  Apart from restoring from backup, how can we recover the transfer rules?  We could manually assign the source system again but there too many to be performed as well as we could not possibly recall all the routines, formulas and infoobject mapping.
    Assistance is greatly appreciated.
    Thanks!
    ismail

    Hi Arun,
    Re-transport from QA is one of the options and our Basis is recommending that as well.  Our options in order of preference is as follows:
    1) Restore from backup
    2) Re-transport from QA
    3) Manually re-create
    Thanks for your thoughts.
    ismail

  • Use BDLS in BI for re-mapping of source system

    Hello,
    Is it possible to use tr code BDLS in BI  in order to automatically change source system assignment in source system related BI objects (such as info sources, info packages..)?
    We have created a new ECC QA client and would like to load data from that to BI (the same BI system as before) and wish to avoid the manual work of manually re-mapping all source system related objects.
    In the thread below the conclusion was that it's possible to use BDLS, but when executing it in test mode and looking at the affected tables, only the parter profiles and EDI-related tables seems to be modified with a new LSN (logical system name). However, I could not find a change in tables containing f.ex. info sources etc.
    Fresh source system clients in production BW system
    Is there anyway of doing this without manually re-mapping the BI objects?
    Thanks,
    F C
    Message was edited by:
            F C

    Thanks!
    When running a LSN conversion in BI from source OLTP to target OLTP in test mode and then checking some BI-object tables, I see that the logical system name is changed, so it's seems to me as if the infosources are changed.. (or?)
    However, perhaps a transport in "system copy" mode is preferrable (?) In step 2, do you mean that I should first collect a system copy in a transport request and then collect "everything before" in the same transport request?
    Any comments on BDLS, Patrick?
    Regards,
    F C
    Message was edited by:
            F C

  • 2LIS_02_HDR : Source System ID error

    Trying to upload from this datasource in 3.5 environment. I keep getting error while extracting, erroneous data in PSA.
    Source System ID not found, how do I fix this?
    Thanks in advance
    Fran

    Fran
    Go To RSA1>Tools>choose assignment of source system to source system ID-->assign ID. assign your source system ID to source system and save it
    You could find source system ID in your source system tab
    Hope this helps
    Thnaks
    Sat

Maybe you are looking for

  • How to tell if iTunes Match is making progress?

    I am new to iTunes Match. I am trying to sync my library of 10K songs. I have tried a few times already. Right now, it is over 12hrs on step 1. How long is this supposed to take? I am a patient man, but geez! Any input would be appreciated.

  • Sock transport

    if i transfer the material from one plant to another plant in same company with reference to 641movement type  ( delivery type-NL)  which t-code is use to use the material by issue plant. if i transfer the material from one plant to another plant in

  • JSF and ADFBC: How to Run a method every time the page is posted back

    Hi everyone, I am using ADFBC and JSF in my project, and there is a page which runs the following logic: The page displays a set of radio options and a submit button. It has a total of 4 options, but they never display all at once. For example, when

  • EE SDK install / PC Tools Spyware Doctor / trojan-spy.flux

    While installing java_ee_sdk-5_04-windows.exe ( on Windows XP Professional SP2) I receive a message from Spyware Doctor that it has blocked a malicious action attempting to access windowsnativetoolkit_3.0.2_1.exe by trojan-spy.flux. I've spent some t

  • How can I change print presets?

    Between the last time I used InDesign (CS3) and now, I upgraded my Mac system software to OS 10.9.5 AND replaced my old printer (which had died) with a new one.  Now when I open a doc in InDesign CS3, I can work with it just fine, but can't print it.