At wit's end over lack of center channel.....
Hi everyone,?My cousin just gave me his old 5.1 speaker system (logitech z-640, analog) and for the life of me I can't get 5.1 surround on my Creative Audigy Platinum card. I can get the Creative 5.1 surround demo to play, but my DVDs won't (in 5.1, that is). When I test the speakers using the Creative software I get all speakers, no problem. I've tried Windows Media Player 10 and a software DVD player that came with my Plextor DVD burner. Here's the bullet point version of what I've tried:
1. set speakers to 5.1 in Creative surround mixer.
2. set Widows XP to 5.1 speakers
3. set Widows Media Player and the other player to output audio to SPDIF
4. set Audigy to AC3 decode5.1 reinstalled software
With setting the software DVD players (both) to SPDIF, the DVDs lock up in the player. If I set the software to 2 channel output, the DVD plays, but only the front/rear, left/right and sub make noise (no suprise there). I've searched the forum, but haven't found the answer yet. Seems like a lot of people have an issue with this so I don't feel too bad. Anyway, can anybody lend me a hand here? Thanks in advance for any advice you might have.
Best Regards, Mike.
Whew!? I got it working after a lot of effort. First of all, thanks for the replies. Here's what worked for me. I decided to start from scratch so I did a clean sweep uninstall of my Audigy. At the end of this procedure you are directed to manually delete the Creative folder from your drive. I was curious, so I opened it before I deleted it and noticed that there were folders for my old SB Live! Value and my SB Live! 5.1 (I'm a big fan of Creative products lol!). I can't help but wonder if maybe that had anything to do with the lock up after selecting SPDIF in WMP 10. Anyway, I reinstalled the Audigy and then installed a nVidia DVD player that I found on my motherboard driver disc. I bet WinDVD would have been a good choice as well. I went into the options for the nVidia player and chose SPDIF out and fired up my copy of T2 extreme and Viola!? 5.1 surround!? Couldn't be happier. Next, I tried using Windows Media Player 10 (after selecting SPDIF out) and I got 5.1 surround again!? Very nice. Now, since I made two changes at once (1. clean sweep, and 2. New DVD player with presumably new codecs) I can't be sure which made the difference. In any case, everything is fine now. I hope someone else finds this thread useful.
Best Regards,
Mike.
Similar Messages
-
I originally posted this question to the community section and was advised to post it here. Please bear with me as this will be a long post. I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
taken and the results of several diagnostic tools and logs.
I have a Sony VAIOS VPCEBB33FM lap top since 2011. I have had this issue on an off for a long time. I'm at my wit's end. Any new insights or suggestions would be greatly appreciated.
Scenario Details
1) Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
2) I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
3) Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
4) Once in a while, the built-in wireless adapter is not found and I have to reinstall the driver. Also the diagnostic tool has had to reset my adapter on an increasing basis.
5) I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop. Even though I've been online on an infrequent basis it worked just fine for a while. Now that
I've been online a bit more I'm having the same issues again.
Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
1) Restarting my adapter
2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
3) Using the IP Config in Command Prompt
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
4) Using the NetSh reset in Command Prompt and restarting my laptop
netsh int ip reset c:\resetlog.txt
netsh winsock reset
ipconfig /flushdns
[restart laptop]
5) Configuring the TCP/IP in several settings
Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
I have used the following settings:
a) Obtain an DNS server address automatically
b) OpenDNS
208 67 222 222
208 67 220 220
c) Google DNS
8 8 8 8
8 8 4 4
6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014. It still did not resolve the issue. My laptop
manufacturer as not come up with an driver update for my adapter since 2010. I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
instead and frankly it didn't make much of a difference when I did it the first time.
7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
Computer Browser [changed from manual to automatic]
DHCP Client [already set to automatic]
DNS Client [already set to automatic]
Network Connections [already set to automatic]
Network Location Awareness [changed from manual to automatic]
Remote Procedure Call (RPC) [already set to automatic]
Server [already set to automatic]
TCP/IP Netbios helper [already set to automatic]
Workstation [already set to automatic]
...and I'm still having DNS issues.
My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
Avast Anti-Virus with Microsoft Network Firewall. I've had DNS issues with both anti-virus/firewall set ups.
Below are the results from the diagnostics and tests that I've ran.
Windows Network Diagnostics
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
Manufacturer . . . . . . . . . : Intel Corporation
Provider . . . . . . . . . . . : Intel
Version . . . . . . . . . . . : 13.2.1.5
Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
Inf File Date . . . . . . . . . : Monday, June 14, 2010 9:05:44 AM
Section Name . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Informational Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2015-03-07 19:57:14-186
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 22 item(s) total, 22 item(s) displayed
BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
60-02-92-C6-D3-E8 Infra <unknown> -62 11 HOME-C7D4-2.4
60-02-92-A1-75-E0 Infra <unknown> -58 6 HOME-B917-2.4
00-1D-D5-D5-34-F0 Infra <unknown> -73 6 HOME-34F2
60-02-92-A1-75-E1 Infra <unknown> -58 6 (Unnamed Network)
06-1D-D5-D5-34-F0 Infra <unknown> -78 6 xfinitywifi
C4-27-95-C9-C4-2D Infra <unknown> -57 1 HOME-C42D
02-1D-D5-D5-34-F0 Infra <unknown> -74 6 (Unnamed Network)
00-0D-97-07-E0-79 Infra g -75 6 (Unnamed Network)
00-1D-CF-2A-44-C0 Infra <unknown> -86 6 HOME-44C2
02-1D-CF-2A-44-C0 Infra <unknown> -86 6 (Unnamed Network)
F8-E4-FB-3C-87-A2 Infra <unknown> -89 6 YVNM7
06-1D-CF-2A-44-C0 Infra <unknown> -87 6 xfinitywifi
0C-F8-93-7A-13-50 Infra b -87 6 PKennedy
06-F8-93-7A-13-50 Infra b -89 6 xfinitywifi
02-F8-93-7A-13-50 Infra b -87 6 (Unnamed Network)
E0-88-5D-C8-A9-DC Infra <unknown> -80 1 HOME-A9DC
E2-88-5D-C8-A9-DD Infra <unknown> -79 1 (Unnamed Network)
16-CF-E2-43-0B-30 Infra <unknown> -88 1 xfinitywifi
60-02-92-F0-A8-C0 Infra <unknown> -90 11 HOME-96A6-2.4
60-02-92-C6-D3-E9 Infra <unknown> -63 11 (Unnamed Network)
02-1D-D4-EB-87-00 Infra <unknown> -88 11 (Unnamed Network)
06-1D-D4-EB-87-00 Infra <unknown> -88 11 xfinitywifi
Connection History
Information for Auto Configuration ID 1
List of visible networks: 13 item(s) total, 13 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 63 Yes HOME-C7D4-2.4
Infra <unknown> Yes 70 Yes HOME-B917-2.4
Infra <unknown> Yes 43 Yes HOME-34F2
Infra <unknown> Yes 70 Yes (Unnamed Network)
Infra <unknown> No 40 Yes xfinitywifi
Infra <unknown> Yes 71 Yes HOME-C42D
Infra g No 43 Yes (Unnamed Network)
Infra <unknown> Yes 28 Yes HOME-44C2
Infra <unknown> Yes 20 Yes YVNM7
Infra b Yes 21 Yes PKennedy
Infra <unknown> Yes 33 Yes HOME-A9DC
Infra <unknown> Yes 35 Yes (Unnamed Network)
Infra <unknown> Yes 16 Yes HOME-96A6-2.4
List of preferred networks: 3 item(s)
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Profile: HTC Portable Hotspot 9F50
SSID: HTC Portable Hotspot 9F50
SSID length: 25
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Profile: belkin.332
SSID: belkin.332
SSID length: 10
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Information for Connection ID 1
Connection started at: 2015-03-07 19:57:14-186
Auto Configuration ID: 1
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 06-1d-d5-d5-34-f0
Security and Authentication
Configured security type: Open
Configured encryption type: None
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: No
Multicast key received: No
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 2068
Ndis Tx: 2543
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 3954
Rx failure: 0
Tx success: 537
Tx failure: 4
Tx retry: 2
Tx multiple retry: 2
Tx max lifetime exceeded: 0
Tx ACK failure: 18
Roaming history: 0 item(s)
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Result of diagnosis: There may be problem
Network Connection details from Command Prompt (some info hidden for security reasons)
Connection-specific DNS Suffix:
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
Physical Address: 00-23-15-54-19-B8
DHCP Enabled: Yes
IPv4 Address: 192.168.X.XX
IPv4 Subnet Mask: 255.255.XX.X
Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
Lease Expires: Saturday, March 07, 2015 8:24:44 PM
IPv4 Default Gateway: 192.168.X.X
IPv4 DHCP Server: 192.168.X.X
IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
IPv6 Default Gateway:
IPv6 DNS Server:
Results of Ping and Trace Route in Command Prompt
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping www.youtube.com
Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
Request timed out.
Request timed out.
Ping statistics for 173.194.121.6:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 19ms, Maximum = 24ms, Average = 21ms
C:\Windows\system32>ping 74.125.239.34
Pinging 74.125.239.34 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
Request timed out.
Ping statistics for 74.125.239.34:
Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
C:\Windows\system32>ping www.hotmail.com
Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
Request timed out.
Request timed out.
Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
Ping statistics for 65.55.157.204:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 111ms, Maximum = 1537ms, Average = 824ms
C:\Windows\system32>ping 207.46.11.236
Pinging 207.46.11.236 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 207.46.11.236:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>tracert www.youtube.com
Tracing route to youtube-ui.l.google.com [173.194.121.5]
over a maximum of 30 hops:
1 19 ms 13 ms 17 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 13 ms 27 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
3 20 ms 26 ms 21 ms he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
4 18 ms 34 ms 22 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 19 ms 18 ms 18 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 35 ms 18 ms 18 ms 209.85.249.217
7 21 ms 19 ms 19 ms 72.14.233.93
8 * * * Request timed out.
9 * 2509 ms 677 ms iad23s25-in-f5.1e100.net [173.194.121.5]
Trace complete.
C:\Windows\system32>tracert 74.125.239.34
Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
over a maximum of 30 hops:
1 54 ms 23 ms 12 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 22 ms 19 ms 17 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 19 ms 19 ms 18 ms he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
4 18 ms 18 ms 18 ms he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
5 19 ms 18 ms 22 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 22 ms 36 ms 19 ms 209.85.249.217
7 26 ms 23 ms 25 ms 209.85.143.112
8 * * * Request timed out.
9 * * * Request timed out.
10 972 ms * * 216.239.51.97
11 148 ms 97 ms 95 ms 216.239.46.241
12 324 ms 130 ms 432 ms 209.85.246.252
13 * * * Request timed out.
14 1403 ms 101 ms 126 ms nuq04s19-in-f2.1e100.net [74.125.239.34]
Trace complete.
C:\Windows\system32>tracert www.hotmail.com
Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
over a maximum of 30 hops:
1 13 ms 13 ms 25 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 15 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 20 ms 19 ms 17 ms he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
4 17 ms 20 ms 20 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 17 ms 18 ms 38 ms as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
6 18 ms 18 ms 36 ms ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
7 * * * Request timed out.
8 * 2191 ms 35 ms ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
9 * * * Request timed out.
10 * * * Request timed out.
11 86 ms 84 ms 84 ms ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
12 86 ms 86 ms 87 ms ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 87 ms 84 ms 85 ms origin.by173w.bay173.mail.live.com [65.55.157.144]
Trace complete.
C:\Users\C.Cunningham>tracert 207.46.11.236
Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
over a maximum of 30 hops:
1 16 ms 16 ms 19 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 18 ms 13 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 21 ms 19 ms 21 ms he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
4 18 ms 21 ms 18 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Results of Intel WiFi Manual Diagnostics
Test Name Test Result Test Summary
Hardware Test Passed Wireless Hardware is enabled
Driver Test Passed Diver is loaded. NETwNs64 Version 13.3.0.24
Radio Test Passed Radio is ON
Scan Test Passed There are 25 Networks available to connect
Association Test Passed Associated
Authentication Test Passed Authenticated
Signal Test Passed Signal Quality: Poor
Ping Test Failed No Reponse: default gateway, DHCP server
I hope this information is enough to get to the root of this problem once and for all. Please let me know if you any other information such as event logs or statistics.
Thanks in advance.Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
#Event Source Time
Error Severity Domain
User Description
45 EvtEngine
3/8/2015 20:40 Success
Connection SYSTEM
iAMT - Failed to read Windows Events Log
46 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Getting List of adapters.
47 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Intel adapter(s) found.
156 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
157 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
158 S24EvMon
3/8/2015 20:47 Error
Driver SYSTEM
AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
159 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
160 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
161 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
162 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -77
163 S24EvMon
3/8/2015 20:49 Information
TCP/IP SYSTEM
VoIP: Got link down - deleting flows .
164 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
165 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
166 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
167 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
168 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
169 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
170 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
171 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
172 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
173 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
174 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -81
175 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
176 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
177 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
178 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -80
179 S24EvMon
3/8/2015 21:03 Information
Driver SYSTEM
RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
186 S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
187
S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31) -
At wit's end with imovie project -- need Help!
Aloha:
I am in the middle of doing a documentary movie of the yearly Air Show put on by my RC model airplane club. Over the past several years I have made a handful of other documentaries and all with out problem, they worked just fine.
On this one, however, I have run into problems that are new and completely frustrating. I have finished editing the movie and all works well in the iMovie mode. I can play the entire movie and all the parts and pieces work just fine. But when I burn the results onto a DVD some scenes (only a few) lose camera audio. This is also true if I export it to Quicktime.
My movie uses camera audio, imported background music and narrative voice-over. And all those play just fine in the iMovie program. But there are several spots where the camera audio doesn't come across in the final product, just total silence except for the background music or any voice-over narrations that may be present during those times. The camera audio just does not come through.
I am at wit’s end and need some help. Has anyone come across this and what did you do to fix it?
Thanks
Dan Page
Maui, HawaiiHi: Thank you very much for the rapid come back, most appreciated.
Hi Dan
A wild guess. Can it be so that those clips are
recorded in Your Camera with
the sound set to 12-bit (often factory/default set).
Should be 16-bit
I'll check the camera for that, but the same camera was used in all the clips and only two or three were missing audio when exported.
Try to extract the missing sounds from each clip and
redo a disk image in
iDVD and see if the sound is back.
That sounds like a great diagnostic and should be far less time consuming than burning a DVD.
Thanks for the hints.
Dan Page
Yours Bengt W -
After,using,CS,for,one,year,I,must,have,an,activation,code,,the,trial,version,will,be,end, over,25,days.,How,is,it,possible?,What,can,I,do?
Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
(Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it -
HT4356 Am at my wit's end trying to print to epson workforce 845
I am at my wits's end trying to print my iPad 2 to an epson workforce 845. Have looked on Epson, Apple, been 3 hours on it, downloaded epson's print utility, but it nothing I do seems to work, trying also to set up with my MacBook Pro for wireless. It worked for awhile and quit. But my iPad has never worked. It works with ease on my HP at home, but not my Epson. get message: no AirPrint found. Geez alou, someone help me before I shoot myself (only joking about shooting myself)
What make and model router do you have?
Make sure they are on the same wifi network. If they are, you'll likely have success turning off the router, the printer, and the iOS device and powering them back on. -
I am begging for some help here. I have read everything I can find on printing within Aperture. The best guides appear to be published by Apple, and so I have followed those. I also have a couple of books that I use as well. I have a long history of successful printing on a pc so this is very frustrating for me.
I calibrate my monitor (iMac) with Gretag EyeOne Display2 hardware. I have used the recommended 2.2 gamma setting, the 6500K, and 120 luminance. I use a profile for my paper. Color management in my printer drive is off. On my pc, the profile was spot-on. I have yet to print a "spot-on" photo within Aperture.
I just tried a beautiful shot of two girls (both gorgeous green eyes on my monitor). The print is dark as heck and colors are totally off. I need to print these for a project that is due soon. I am at my wit's end.
Can someone help me? I am starting to get a bit desparate, as the paper and ink-wasting is costing me a ton of money. I will be forever grateful if someone can point me in a direction that will help. Not sure where else to go from here.it's a long reply, but bare with me. i hope this is of some help for you.
the colors are still black/brown (when they should be blue, for instance).
the colors are still black/brown??? does the print look like it was almost flooded with ink that you can't quite make out what you've printed, or that where it's suppose to be blue it's black/brown in color?
when an image prints very dark, i can only assume that somewhere in the set-up color management is happening twice.
go to this link, http://files.support.epson.com/htmldocs/r220_/r220__rf/softx3.htm and then scroll down to Color Management section. note the screen capture for the Stylus Photo R220 print dialogue. i know you've already checked, but would you check again to make sure that your setting is not the same as in the screen capture. that is Off (No Color Adjustment) is the only option you want selected.
(one more thing that you could double check, and this is going to sound very absurd, because it's most probably not possible. would you check to see if the ink cartridges are where they are supposed to be, and that they're the right color? if you have printed with these same ink cartridges without any color problems on your pc, then it rules out misinstalled or mislabled ink cartridges.)
by the way, dale's suggestion is the right direction. you want to put aside (remove) custom profiles and other existing profiles and use only what the R220 driver installs by default.
meanwhile, for the purpose of meeting your deadline, i suggest that you make your prints with what have worked for you. after you've taken care of that, you can continue with your current Color Management issue.
one more thing. it's not your imagination, there is very little information about color management and printing in Aperture.
Mac OS X (10.4.7) -
Internal Mic not Working, external mic quits arbitrarily, I'm at wit's end!!!!
Hey kids!
The Computer: Toshiba Satellite A355D-S69221
The Program: 32 Bit Windows Vista
The issue: Internal Mic not recognized, external mic quits midway through conversation, Realtek Digital output not plugged in.
So being the smart guy I am, a few weeks back I decided to do the smart thing and delete all the speech recognition software off this thing. I don't need it, so wth.
Now, my internal mic quit. I reinstalled the software, rolled back drivers, deleted drivers to rebuild the driver stack, did a BIOS update, did the GTA ViceCity cheatcode start (unplug everything hold power key 30 seconds, reboot, f2 to enter bios, f9 to update, f10 to save), and nothing.
I did notice that when I had the Realtek Digital Output set as standard, my mic jack was illuminated by a red LED, and the Realtek HD manager wouldn't pop up when I plug something in.
The last irritating part is that I will talk to my wife via vo/ip, the external mic I am using will just quit mid conversation, and I have to reload a driver to get it to work again. I am at my wit's end with this thing, can anyone help? The last thing I am goign to do is another system restore from an earlier date than I used before. Does anyone have any other hints/clues/ideas?
KFDThanks Jeff. No this isn't some kind of emergency so no one really minds my tinkering until it does get back up.
OK, I got it now. This is what my cyrus.conf looks like. It doesn't look like there's anything wrong with it...
# standard standalone server implementation
START {
# do not delete this entry!
recover cmd="ctl_cyrusdb -r"
# this is only necessary if using idled for IMAP IDLE
# idled cmd="idled"
# UNIX sockets start with a slash and are put into /var/imap/socket
SERVICES {
# add or remove based on preferences
imap cmd="imapd" listen="imap" prefork=0
imaps cmd="imapd -s" listen="imaps" prefork=0
pop3 cmd="pop3d" listen="pop3" prefork=0
pop3s cmd="pop3d -s" listen="pop3s" prefork=0
sieve cmd="timsieved" listen="sieve" prefork=0
# at least one LMTP is required for delivery
lmtp cmd="lmtpd" listen="lmtp" prefork=0
lmtpunix cmd="lmtpd" listen="/var/imap/socket/lmtp" prefork=0
# this is only necessary if using notifications
# notify cmd="notifyd" listen="/var/imap/socket/notify" proto="udp" prefork=1
EVENTS {
# this is required
checkpoint cmd="ctl_cyrusdb -c" period=30
# this is only necessary if using duplicate delivery suppression
delprune cmd="ctl_deliver -E 3" at=0400
# this is only necessary if caching TLS sessions
tlsprune cmd="tls_prune" at=0400
LIMITS {
imaplimit value=0
But yet it insists with the message: relay=cyrus, delay=239180, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: No such file or directory_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
when I try to send a message through the server. Could this be a permissions thing? I've fixed the permissions a lot of times and nothing seems to get changed...
Again, thanks for everyone's help. I'm sure this is something dumb that I'm just missing but since I'm not familiar enough with the system it's hard for me to figure out what that is! -
Various types of sound out of center channel on
So lets see, quicktime movie trailers, music in winamp, games,?MSN nudge sound, ?-they all come out all 5. channels (Z-5500s)?But the audio for flash movies I've had on my computer, some WMP videos, MSN new message sounds - these are all center channel only - and werent on my last system.
another thing - if I change the audio settings under control panel to quadraphonic - they do come out all the speakers, back to 5....... center channel only. its very distracting and stupid to not be utilizing all the speakers for things like a video. whats the deal here? Thanks for the help in advance.apparently the issue might be that the X-Fi/console just plays mono encoded material through center only?
i preferred when it utilized all the speakers for things like that anyways on my audigy gamer...
is this the case?
edit: CONFIRMED. I found the msn sounds, and haha the NUDGE IS STEREO and the TYPE is MONO. Explains everything! now to get Creative to fix it....
Further:
with CMSS3D off, mono will play over both R and L, just with no seperation of course. (but then your rears center will never be used by pretty much anything outside of games)
with it On XPAND, it will play through center only. (4 not being used)
with it on SURROUND, it will play through center and rears, but not front L and R. (the 2 most important ones arguably not being used)
seemingly on my Audigy , all speakers would be used even for mono sources. So am I correct in guessing they changed things?
All speakers should be used for mono sources.
Can creative update this in a new driver?
EDIT: ARG I just found out it only happens in "entertainment mode" at that! Game mode does 4/5 (not centre). What is the reasoning for this?Message Edited by deusfaux on 03-0-200609:2 PM -
Accessing center channel in Sony AVCHD video AC3 audio (5.1 surround)
I have tons of video shot on Sony HDR-CX7 and HDR-CX12 camcorders (AVCHD) in 5.1 stereo. iMovie '09 and Final Cut Express import the audio as two channel stereo, which is normally fine for a consumer app.
I use a Sony wireless microphone to record interviews, and I normally set the camera to record only the monophonic microphone audio. But, there is also a setting to let the camera record 5.1 stereo from it's built-in microphone, and use the wireless mic as the center channel audio.
I have footage recorded this way, and I find that when I play it back in stereo, I get a slight delay/echo caused by the wireless mic recording voices, and the camera recording voices (slightly offset). I cannot use the audio this way.
I want to extract the center channel audio from the AVCHD .mts files. I can then line that audio up with the video in Final Cut Express (or even overlay it in iMovie '09).
Does anyone know of a free utility that can strip out audio from AVCHD files?
It looked like Handbrake might work, but it errors out when it tries to convert more than two channel audio.
I believe the AVCHD audio is AC3 format, so if I can strip that out, Quicktime is able to mute the other surround channels.
Any tips?Here is my current status, and a work-around method to accomplish this.
First, using "ffmpeg" it is possible to extract just the .AC3 audio stream from a .MTS AVCHD camcorder file. I have tried to do this with the Mac OS X GUI version, ffmpegX, but it errors out. It looks like it is sending the wrong parameter to ffmpeg internally (or perhaps it is using a different ffmpeg command I have on my machine). Anyway, the command looks like this:
ffmpeg -i 00000.MTS -acodec copy audio.ac3
That will extract just the audio stream from within the MTS file (which is an AC3 file). By default, you cannot play .AC3 files in QuickTime. It turns out, I had "Perian" installed, which is an extension for QuickTime that allows it to play a bunch of other files. One of the settings was a Stereo mode, which was causing anything I tried to play mix down to stereo. Aha! So, I could toggle that off and actually get to the audio track I wanted.
BUT, since native Mac OS X does not read .ac3, my workaround is to again use ffmpeg to convert the .ac3 file to a .aac:
ffmpeg -i audio.ac3 -acodec ac3 -ab 512k audio.aac
Since the source AC3 file was 448kb/s, I just manually chose 512k as the conversion rate, so it shouldn't lose too much quality. That value can be changed to decrease file size.
The end result, "audio.aac", is now a 6 channel 5.1 audio file. You can open it in QuickTime, and go to Window->Show Movie Properties then select the "Sound Track" track, and the "Audio Settings" tab of that track, and you will see tracks 1-6 (Left, Center, Right, etc.). You can toggle the tracks off to get to the one you want (in my case, just Center).
From there you could export this out to a file with just the track you selected, or drag the .aac file in to Final Cut Express.
If you drag in to Final Cut Express, you will see it takes up five audio tracks. I drug this under the original imported video track, and was able to mute the ones I did not need. I also found I could unlock the audio from the video, and then delete the ones I didn't want, just to clean up the edit window a bit.
The end result is now I can import the AVCHD file in to Final Cut Express, and bring in this converted AAC under the video to access just the center audio I wanted.
When I have time to streamline this process a bit more, I will update this topic. -
Audio bleeding to center channel from left main on X-fi Elite
Erg! I was testing to see if I would like the x-fi as a pre/pro for about a week now. I?have been using the digital out since?I got the card an?it was working great for some time.. Now, using the analog outs, the center channel doesn't work and left ch. bleeds into the center. In the THX setup, If I play noise to the center nothing happens but play the left main it comes out of the left and center. I have the x-fi feeding into the Ext-Decoder source of my denon so its basically just being used as an amp. X-fi is configured to internal decoders with 5.. All the features are off for debugging(crystalizer,3D, ect..).
I fired up the THX optimizer in the Cars dvd to test DD and DTS and same result(theatertek, windvd8). It does the test tone for each speaker and when it gets to the left main it also comes out of the center. When it sends test tone to center speaker nothing plays. Its like my cables were crossed (somehow )
I switched the settings over to 4. in x-fi and it properly sends center ch. to left and right mains.
Am I missing a step?
I made sure control panel was synchronized to X-fi just in case. I have tried uninstalling and re-installing drivers and s/w (XP).
Maybe my card went bad ? its only been 5 monthsAny ideas what to look into?I have been searching for a long time now and couldn't find anything on creative or avs. Thanks for the help!?Update: Well, i figured out it is wired correctly because if I go into "gaming mode" it works properly. I have the problem when in entertainment mode or audio creation mode. I tried to replicate all the settings in the gaming mode into entertainment mode but still no go.. Update 2: I uninstalled all x-fi sofware and took out anything in the registry. After reinstalling, it worked like normal. I then started fiddling and somewhere in my "fiddling" process I noticed?the sud?wasn't working anymore. What was happening before is now mirrored back to the Suroundleft/sub. So now the subwoofer is playing whatever the SL is playing and the sub channel plays nowhere. I went into Game mode and it worked untill I went into the?bass management. hmmm..
Message Edited by jdamore on 02-27-200705:36 PM -
Getting ORA-03113: end-of-file on communication channel error
Hi,
We are getting the following error while calling a Oracle stored Procedure from .NET interface.
Getting ORA-03113: end-of-file on communication channel Process ID: 28954 Session ID: 466 Serial number: 9280
Actually, The other procedures doesn't have this issue. We are witnessing this error only when we call a specific procedure which returns a data cursor. We have checked for any DBLINK involvement but couldn't find any. Please help us here to resolve this issue. Please let me know if you need any information further.
Regards,
Subhadeepend-of-file on communication channel
Cause: The connection between Client and Server process was broken.
Action: There was a communication error that requires further investigation. First, check for network problems and review the SQL*Net setup. Also, look in the alert.log file for any errors. Finally, test to see whether the server process is dead and whether a trace file was generated at failure time. -
Convrtd to Invterval Part- ORA-03113: end-of-file on communication channel
Hi all,
I had a table as Interval Partitioned. In order to create XML- Xpath indexes on it, I converted it to Range Partitioned table.
I am able to create the XPATH indexes but I get the error: ORA-03113: end-of-file on communication channel
- When I revert the code to Interval Partitioned without the XMLIndex, it works fine(although takes time as no XML Index)
- When I convert table to non partitioned table, create the XML Index, it works fine.
But I need the partitons, so when I create the partitioned table I get the error.
CREATE TABLE INT_PART_TABLE
DB_ID VARCHAR2(10 BYTE),
xML_mESSAGE SYS.XMLTYPE,
LOAD_TIMESTAMP TIMESTAMP(6)
XMLTYPE xML_mESSAGE STORE AS BINARY XML
PARTITION BY RANGE (LOAD_TIMESTAMP)
PARTITION MAX VALUES LESS THAN (TIMESTAMP' 2013-06-01 00:00:00')
TABLESPACE CSTR_STG_DATA
NOCOMPRESS
NOCACHE
ENABLE ROW MOVEMENT;
BEGIN
DBMS_XMLINDEX.dropparameter('Indx_Par');
END;
BEGIN
DBMS_XMLINDEX.REGISTERPARAMETER(
'Indx_Par',
'PATH TABLE Table1
PATHS (INCLUDE ( /abc:field1/xyz:field2
/abc:field1/def:field2
NAMESPACE MAPPING ( xmlns:abc="ABCD"
xmlns:def="DEFG"
xmlns:xyz="XYZA"
end;
create index INDX_XPATHS on "INT_PART_TABLE" (XML_MESSAGE) indextype is xdb.xmlindex
parameters ('PARAM Indx_Par') local;
Now if I execute the following statement in
SELECT T.xML_mESSAGE
FROM INT_PART_TABLE1 T
WHERE XMLEXISTS (
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'
PASSING T.xML_mESSAGE AS "p");
- Is there any other way of writing this Select statement, which may work?
- Any other thing I need to take care of when defining the table and partitions script so that I don't get this error?Hi,
I think it's time you give a clear (and working) test case so that we can safely try to reproduce the issue.
What you've given so far has syntax error and name mismatch.
So please :
- database version (SELECT * FROM v$version)
- complete sequence of DLLs
- some sample XML documents (it doesn't have to be the real ones, but at least something realistic)
Thanks in advance.
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'Why all that stuff? You don't have to return a boolean.
The following works for me on 11.2.0.3 :
SQL> CREATE TABLE int_part_table (
2 db_id VARCHAR2(10)
3 , xml_message XMLTYPE
4 , load_timestamp TIMESTAMP
5 )
6 XMLTYPE xml_message STORE AS BINARY XML
7 PARTITION BY RANGE (load_timestamp) (
8 PARTITION MAX VALUES LESS THAN (timestamp '2013-06-01 00:00:00')
9 )
10 NOCOMPRESS
11 NOCACHE
12 ENABLE ROW MOVEMENT;
Table created
SQL> insert into int_part_table values (1, xmltype('<main><id>144283</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>9085802</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>1</id></main>'), sysdate);
1 row inserted
SQL> commit;
Commit complete
SQL> create index int_part_table_uix on int_part_table (xml_message)
2 indextype is xdb.xmlindex
3 parameters (
4 'PATH TABLE INT_PART_TABLE_PT
5 PATHS ( INCLUDE ( /main/id ) )')
6 local;
Index created
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4 '/main[id=("144283","9085802")]'
5 PASSING xml_message
6 )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3517234298
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 155 | 34 (6)| 00:00:01 | | |
| 1 | NESTED LOOPS | | 1 | 155 | 34 (6)| 00:00:01 | | |
| 2 | VIEW | VW_SQ_1 | 1 | 25 | 32 (4)| 00:00:01 | | |
| 3 | HASH UNIQUE | | 1 | 47 | | | | |
|* 4 | HASH JOIN SEMI | | 1 | 47 | 32 (4)| 00:00:01 | | |
| 5 | PARTITION SYSTEM SINGLE | | 2 | 90 | 2 (0)| 00:00:01 | 1 | 1 |
|* 6 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 2 | 90 | 2 (0)| 00:00:01 | 1 | 1 |
|* 7 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 8 | COLLECTION ITERATOR PICKLER FETCH | XQSEQUENCEFROMXMLTYPE | 8168 | 16336 | 29 (0)| 00:00:01 | | |
|* 9 | TABLE ACCESS BY USER ROWID | INT_PART_TABLE | 1 | 130 | 1 (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
4 - access("SYS_P3"."VALUE"=SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0) AND
SUBSTRB("VALUE",1,1599)=SUBSTRB(SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0),1,1599))
6 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
7 - access("SYS_P3"."PATHID"=HEXTORAW('704E') )
filter("SYS_P3"."PATHID"=HEXTORAW('704E') )
9 - filter("ITEM_6"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))
Note
- Unoptimized XML construct detected (enable XMLOptimizationCheck for more information)
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4 '/main[id="144283" or id="9085802"]'
5 PASSING xml_message
6 )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3748936130
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 155 | 11 (10)| 00:00:01 | | |
| 1 | NESTED LOOPS | | 1 | 155 | 11 (10)| 00:00:01 | | |
| 2 | VIEW | VW_SQ_1 | 2 | 50 | 8 (0)| 00:00:01 | | |
| 3 | HASH UNIQUE | | 2 | 180 | | | | |
| 4 | CONCATENATION | | | | | | | |
| 5 | NESTED LOOPS | | | | | | | |
| 6 | NESTED LOOPS | | 1 | 90 | 4 (0)| 00:00:01 | | |
| 7 | PARTITION SYSTEM SINGLE | | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 8 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 9 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 10 | PARTITION SYSTEM SINGLE | | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 11 | INDEX RANGE SCAN | SYS117585_INT_PART__PIKEY_IX | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 12 | TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
| 13 | NESTED LOOPS | | | | | | | |
| 14 | NESTED LOOPS | | 1 | 90 | 4 (0)| 00:00:01 | | |
| 15 | PARTITION SYSTEM SINGLE | | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 16 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 17 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 18 | PARTITION SYSTEM SINGLE | | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 19 | INDEX RANGE SCAN | SYS117585_INT_PART__PIKEY_IX | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 20 | TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 21 | TABLE ACCESS BY USER ROWID | INT_PART_TABLE | 1 | 130 | 1 (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
8 - filter("SYS_P5"."VALUE"='9085802' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='9085802')
9 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
11 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
"SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
12 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
16 - filter("SYS_P5"."VALUE"='144283' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='144283' AND
(LNNVL("SYS_P5"."VALUE"='9085802') OR LNNVL("SYS_P5"."PATHID"=HEXTORAW('704E') ) OR
LNNVL(SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1) OR LNNVL(SUBSTRB("VALUE",1,1599)='9085802')))
17 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
19 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
"SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
20 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
21 - filter("ITEM_2"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))I asked in one of your other threads if /main/id was unique per XML document.
If so, you can use a simple function-based index instead of the XMLIndex :
SQL> drop index int_part_table_uix;
Index dropped.
SQL> create index int_part_table_ix1 on int_part_table (
2 xmlcast(
3 xmlquery('/main/id' passing XML_MESSAGE returning content)
4 as varchar2(10)
5 )
6 );
Index created.
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLCast(
4 XMLQuery('/main/id' PASSING xml_message RETURNING CONTENT)
5 AS VARCHAR2(10)
6 )
7 IN ('144283', '9085802');
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 2864653096
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 2 | 236 | 2 (0)| 00:00:01 | | |
| 1 | INLIST ITERATOR | | | | | | | |
| 2 | TABLE ACCESS BY GLOBAL INDEX ROWID| INT_PART_TABLE | 2 | 236 | 2 (0)| 00:00:01 | 1 | 1 |
|* 3 | INDEX RANGE SCAN | INT_PART_TABLE_IX1 | 2 | | 1 (0)| 00:00:01 | | |
Predicate Information (identified by operation id):
3 - access(CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944) AS
varchar2(10) )='144283' OR CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944
) AS varchar2(10) )='9085802') -
Error ORA-03113: end-of-file on communication channel in droppping a table
Good evening,
I am very new on Oracle and I have a problem with some tables. Without any reason, apparently, I can't drop some of my table. Oracle gives me this error:
ORA-03113: end-of-file on communication channel
and then close the connection of the user.
What I should have to do?
It is very important.
Thanks a lot
best regards
Anna ZanettiGood morning, I still have the same problem, I can't drop a table from my database.
The message is again:
Re: Error ORA-03113: end-of-file on communication channel
The alert log file says:
Fri Nov 17 12:27:31 2006
Errors in file /usr/oracle/admin/oracledb/udump/oracledb_ora_4369.trc:
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
and in file oracledb_ora_4369.trc there is:
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0xc, PC: [0x955c61f, 0955C61F]
Registers:
%eax: 0x00000000 %ebx: 0x00012d95 %ecx: 0x58301930
%edx: 0x00000000 %edi: 0x5830d9e8 %esi: 0x00000000
%esp: 0xbfffae1c %ebp: 0xbfffb060 %eip: 0x0955c61f
%efl: 0x00210282
(0x955c61f) movzw 0xc(%eax),%eax(0x955c623) cmp $30,%eax
(0x955c626) jle 0x955c63e
(0x955c628) xor %edx,%edx
(0x955c62a) push %edx
*** 2006-11-17 12:27:31.658
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
Current SQL statement for this session:
drop table fiumiforjoin
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
08856247 call 0885776A 1 ? 0 ? 1 ? 1 ? 0 ? 0 ?
08290320 call 0885605A 3 ? 0 ? 0 ? 0 ? 0 ? 0 ?
0955C61F signal 08290320 B ? BFFFAAB0 ? BFFFAB30 ?
0955D6BE call 0955C61F 5830F01C ? 0 ? FFFFFFFF ? 0 ?
1 ? 5830F01C ?
08DD1EEB call 0955CC22 BFFFB394 ? 0 ? 0 ? BFFFB348 ?
58EAB2B0 ? C ?
09434EF3 call 08DD1A28 BF2A8C4 ? BFFFC0C0 ?
BFFFC0C0 ? 4 ? B6AB0300 ?
B6ABC2E0 ?
094106E0 call 094326D4 4 ? 0 ? BFFFC0C0 ?
093D7BB5 call 0940FEF8 3 ? E ? BFFFC1F8 ? A4 ?
093D630C call 093D7AC4 BFFFCDF0 ? BFFFCD08 ? 17 ?
1 ? 0 ? A4 ?
08293DE6 call 0850FFFF 5E ? 14 ? BFFFCDEC ?
0A1ED44D call 08293DE6 5E ? 14 ? BFFFCDEC ? 0 ?
08292122 call 0A1ECAE4 BF2A8C0 ? 5E ? BFFFCDEC ? 0 ?
BFFFD6E8 ? BFFFD6E4 ?
0941F190 call 0829193C 0 ? 0 ? BF2A8C0 ? BF83090 ?
F1 ? 0 ?
08293DE6 call 0850FFFF 3C ? 4 ? BFFFEB08 ?
08291238 call 082937A8 3C ? 4 ? BFFFEB08 ? 0 ?
0828F403 call 08291012 3C ? 4 ? BFFFEB08 ?
08274A3D call 0828F39C BFFFEAEC ? 3C ? 4 ?
BFFFEB08 ? B6CC017C ?
B6C1A17C ?
__libc_start_main() call 08274A3D 2 ? BFFFEBA4 ? BFFFEBB0 ? 0 ?
+218 B6C1C898 ? B7600020 ?
Any idea of what I have to do?
Thanks for your help..
Best Regards
Anna Zanetti -
ORA-03113: end-of-file on communication channel while executing a query
Hi all,
I am getting following error while executing one of the query.
ORA-03113: end-of-file on communication channel
The query involves subqueries. At one point, in the second last condition of the whole query is the cause. what makes the query to disconnect from database.
I am pasting the whole query with highlighted part causing the error.
select
A.Num_Employee_Id as col_0_0_,
A.Str_Name_For_Reports as col_1_0_
from
Est_Esb_employee_m A
where
A.num_office_id=1
and A.Num_Employee_Id not in
(select
B.Num_Employee_Id
from
Est_Esb_Employee_Service_D B
where
B.Chr_Curr_Status='N'
and
B.Dat_Effective_Date is not null
and
B.Dat_Effective_Date=
(select
max(C.Dat_Effective_Date)
from
Est_Esb_Employee_Service_D C
where
C.Num_Employee_Id=B.Num_Employee_Id
and C.Dat_Effective_Date is not null
and B.Num_Transaction_Id=
(select
max(D.Num_Transaction_Id)
from
Est_Esb_Employee_Service_D D
where
D.Dat_Effective_Date=
(select
max(E.Dat_Effective_Date)
from
Est_Esb_Employee_Service_D E
where
Num_Employee_Id=D.Num_Employee_Id
and D.Num_Employee_Id=B.Num_Employee_Id
and B.Num_New_Office_Id=1
order by
A.Str_First_Name,
A.Str_Middle_Name,
A.Str_Last_Name
Awaiting your valuable suggestions.
Regards
Vijay KumarI would start by compareing the explain plan of both versions of the statement.
Also by adding such a restriction you might change from an uncorrelated subquery to a correlated subquery. I'm not sure, because your code is hardly readably without formatting.
In any case you seem to select again and again from the same table. Maybe you should find a way to optimize to query in terms of io (less table access). Then this problem could go away. -
Error ORA-03113: end-of-file on communication channel (while starting db)
Hello everybody! :-)
Looks like a need help with Oracle 11gr2 (RHEL 6 x64). Faced with a problem while starting database:
sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri Dec 7 01:43:45 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 2538741760 bytes
Fixed Size 2216024 bytes
Variable Size 1828720552 bytes
Database Buffers 687865856 bytes
Redo Buffers 19939328 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6601
Session ID: 575 Serial number: 5
This is logfile (/u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/alert/log.xml):
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 28496896 bytes disk space from 5218762752 limit
</txt>
</msg>
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>ARCH: Error 19809 Creating archive log file to '/u01/app/oracle/flash_recovery_area/ORCLDOCS1/archivelog/2012_12_07/o1_mf_1_249_%u_.arc'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-16038: log 3 sequence# 249 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/orcldocs1/redo03.log'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>USER (ospid: 6881): terminating the instance due to error 16038
</txt>
</msg>
<msg time='2012-12-07T01:52:23.540+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Instance terminated by USER, pid = 6881
</txt>
</msg>
How can I resolve it, please advice. Thank you.
Edited by: user9001403 on 06.12.2012 5:58Hi,
Looks like your archivelog space is exhausted. Increase the db_recovery_file_dest_size size and check.
SQL> show parameter db_recovery
NAME TYPE VALUE
db_recovery_file_dest string /oracle/flash_recovery_area
db_recovery_file_dest_size big integer 3882MRegards,
Anand.
Maybe you are looking for
-
Production and Development in Different Networks.
Hi Experts, I have installed SAP ECC 6.0 DEV with EHP5 and Solution Manager in one Network Landscape i.e under one live ip. PRD is not yet installed. My SAP Router is running on Solution manager. Now i have a situation here. The client now wa
-
in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more. Genius bar told me to erase the harddisk and install OSX Maverick again.
-
Any advice for purchasing an External Superdrive?
Hi, My Aluminum iMac's superdrive is starting to fail and I have been advised by my local Apple repair service that it would cost me about $371 for the new drive and labor. They said that I should just get an external superdrive and it would be a lit
-
Changing package assigned to EEW Development
Hello all. One of our developers has assigend an incorrect package when creating an extensing in the easy enhancement workbench. We cannot re-assign the package to a "Z" one. When we try to delete the extension in the EEW we get the error message "
-
Hi I need to create a form to allow for non-profits to update their information that is currently posted online. (note: information is currently hard coded as HTML) Obviously making this dynamic would save loads of time. Any ideas of where to begin o