Ati and compiz dont work together?

Hey,
When i start fusion icon i got this output:
[roland@arch ~]$ fusion-icon
* Detected Session: gnome
* Searching for installed applications...
* Using the GTK Interface
** Message: pygobject_register_sinkfunc is deprecated (GtkWindow)
** Message: pygobject_register_sinkfunc is deprecated (GtkInvisible)
** Message: pygobject_register_sinkfunc is deprecated (GtkObject)
* Starting Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp --loose-binding
* Reloading compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp --loose-binding
The windowbar diseapears and i cant set themes with emerald.......
here is my compiz check output:
[roland@arch ~]$ ./compiz-check
Gathering information about your system...
Distribution: Arch Linux
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Cypress [Radeon HD 5800 Series]
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped:
Error: No rendering method in use (AIGLX, Xgl or Nvidia)
and here my xorg config:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "InputClass"
Identifier "keyboard"
MatchIsKeyboard "yes"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
lg

Also, write english in the code. The programming languages are modeled after the english language, so having variable names in polish is quite useless (except in preventing other people from reading your code and helping you).

Similar Messages

Oracle forms viewlets about SSO and Forms dont work

hi:
the oracle forms viewlets (in Forms Sample Code) about SSO and Forms dont work. it says html as been modified. i think it's a viewlet builder protection.
thanks

user549194 wrote:
Hi to everyone,
This is a rant on the stupidity of Oracle Forms. From my point of view, it is pointless and VERY PAINFUL to develop.
Come on, who in the right would use Oracle FORMS to develop database applications? Heck, I can develop my very own web application in Servlet and JSP twice as quick as this piece of crappy framework can produce. Who are you trying to kid? Tie down PL/SQL to the application level? The very idea of FORMS is bullshit.
To whoever who is reading this, please flame me all you want. Oracle Forms is a crappy product. Dont't waste your time and efforts using it. You are better off using some other MORE PRODUCTIVE framework. So there.Hello,
I have seen many threads speaking about forms future but discussions were also MORE PRODUCTIVE as your framework
pointless ? I think your thread is pointless...
I will not make the pro-forms against the world... There are so many tools, just make the right choice for your needs.
so go back to your fantastic productive framework and have success with it.
regards
JeanYves

Trying to make sense on how and if RBAC and MOAC could work together

Hi All,
We upgraded from 11.5.9 to R12.1.1 in Nov-2009.
Since the time we have upgraded to R12, we are trying to make sense as to how and if RBAC and MOAC could work together.
The use case is as below:
*11i Days*
US Accountant - accesses ‘AR superuser US’
Canada Accountant - accesses ‘AR superuser Canada’
France Accountant - accesses ‘AR superuser France’
Spain Accountant - accesses ‘AR superuser Spain’
North America Financial controller - Switches between 'AR superuser US' and 'AR superuser Canada'
European Financial controller - Switches between 'AR superuser France' and 'AR superuser Spain'
CFO - Switches amongst 'AR superuser US','AR superuser Canada', 'AR superuser France' and 'AR superuser Spain'
Now in R12- (Wow there is MOAC!)
US Accountant - accesses ‘AR superuser US’
Canada Accountant - accesses ‘AR superuser Canada’
France Accountant - accesses ‘AR superuser France’
Spain Accountant - accesses ‘AR superuser Spain’
North America Financial controller - accesses 'AR superuser North America'
European Financial controller - accesses 'AR superuser Europe'
CFO - accesses 'AR superuser Global'
With R12 now there are 3 additional responsibilities.
We have (like most of the other EBS customers) custom responsibilities and so there is maintenance.
More the responsibilities more the maintenance...More the SOD issues.
To prevent creating new responsibilities, we could use the ‘MO: Security Profile’ at the user level BUT that would mean that now these users would have access to multiple OUs for all the responsibilities...that is not good.
What-If: There is only 1 responsibility 'AR SuperUser' and somehow using RBAC, roles are created and assigned to users so that they only have access to specific OUs.
Apparently, MOAC works based on MO:Security Profile that is something that RBAC cannot control.
Am I missing something...RBAC seems to be no good?
In PROD(R12.1.1)- We are expecting that we would end up creating 100+ new responsibilities since we have many shared services users and they all want to benefit from MOAC...Appreciate, if you could please help us understand how we can prevent these 100+ new responsibilities from getting created?
Thanks
Rahul Gupta

Hi Rahul,
your question is quite interesting. I did a lot in the area of RBAC to understand the background.
RBAC mainly allows you to
- group responsibilities
- build hierarchies
- manage low level data access (via VPD)
- Grant permissions (new with R12)
Unfortunately you can't control profile options via RBAC. Therefore, the MO:Sec Profile has to stay on responsibility level. I was playing with the alternative to put this profile option on user level, but also in this case the number of maintenance steps will stay the same.
I would like to share a document with you, what's your email (or search my name in linkedin)?
kr
Volker Eckardt

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

I'm not sure iBA reacts well to this type of editing, not to mention the cumbersome nature of trying to bring everything together in general.
I'd suggest a workflow where one book is handed off, instead. That, or, let the individuals involved create their basic content in Pages, then when ready, use iBA's Insert Pages Chapters menu to string them together. Best to work in a linear fashion and avoid adding/removing/adding/moving portions, etc.
If you must have separate authors, be sure to use the identical template and have them all properly trained up before going forward - trying this as a learning experience may result in an off-putting experience otherwise , with more time spent on chasing knots than on expressing writing skills, etc.

I have a shuffle and it dont work so i got a nano how can i get the music from the shuffle to the nano

i have a shuffle and it dont work so i got a nano how can i get the music from the shuffle to the nano

Hi tak661_99m,
It sounds like you want to transfer music from your older iPod shuffle to iTunes and then sync it to the new iPod nano. Take a look at the article below for more information about transfering music from your device to iTunes. The way you transfer the music to the new iPod nano will vary depending on where the music came from and whatever is most convenient for you.
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/ht1209
Media type
Transfer method
Music purchased from the iTunes Store
Transfer your media through iTunes.
Download your media through iTunes in the Cloud1.
Download your media through iTunes Match2.
Music imported from a CD or other source
iTunes can't transfer this media back to your computer.
Back up your iTunes library or use iTunes Match2.
iTunes in the Cloud is supported on up to 10 devices:
iPhone
iPad
iPod touch with iOS 4.3.3 or later
iTunes for Mac or Windows 10.3 or later
If you use an iPod classic, iPod nano, iPod shuffle, or earlier iPod model, use iTunes in the Cloud within iTunes on your computer. Previously purchased content may be unavailable if it's not in the iTunes Store. Learn more about
downloading past purchases from the App Store, iBooks Store, and iTunes Store
and
which content types are supported for iTunes in the Cloud by country
iTunes Match is supported on these devices:
iPhone
iPad
iPod touch with iOS 5.0.1 or later
iTunes for Mac or Windows 10.5.1 or later
If you use an iPod classic, iPod nano, iPod shuffle, or earlier iPod model, use iTunes Match within iTunes on your computer. iTunes Match is subject to subscription purchase and
availability
. Learn more about
subscriptions to iTunes Match
-Jason

Can I make my iMAC and MAC book work together?

I've done the set up to join other networks.....trying to get my desktop and laptop to work together.
Is it even possible for them to keep updated info regardless of which one I enter it on?
If so, please tell me how.
Thank you
Diane

There are various programs like Dropbox that can help you sync two computers over the network, but I still find them kind of a hassle to set up and maintain.
I simply make my laptop the primary storage, and I turn on File Sharing on my laptop. Then on my desktop I just log into my laptop and open files directly over the network. On my desktop I have aliases to my laptop folders so I can get into them in a couple clicks.

I cant tranfer music from an old account because i dont remember the password and i dont work there anymore so i cant recieve the email to get the password.

i cant tranfer music from an old account because i dont remember the password and i dont work there anymore so i cant recieve the email to get the password.

Hi, Carmen.
Thank you for visiting Apple Support Communities.
If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Cheers,
Jason H.

HT1212 if i have did all that yall told me to and it dont work what do i do with it

if i have did all that yall told me to and it dont work what do i do with it

Call Apple.

White Screen: xf86-video-ati and Compiz After Trying fglrx? [SOLVED]

I have an ATI Radeon X1200 graphics card. I recently tired the ATI proprietary catalyst driver (and catalyst-utils) from the AUR. They did not work well for me, so I uninstalled them. I had run "aticonfig -initial" but, after removing catalyst and catalyst-utils I restored my old xorg.conf. For some reason, with xf86-video-ati set up again, compiz starts, but goes to a white screen. I can see and move my cursor. Everything functions normally, I just can't see anything. I right clicked my desktop and created folders as a test. When I rebooted without compiz, the clicks had been received and folders had been created. How can I fix this? I'm using Gnome (if that means anything). Here's my /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "drm"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SHP"
ModelName "13ce"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS690M [Radeon X1200 Series]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by hank863 (2009-03-29 03:15:26)

Fixed It!! I had to reinstall xorg, mesa, libgl, xf86-video-ati, and ati-dri for some reason.

Do Adobe Palettepanel and Adobe Air work together?

Hallo!
when I am working with Flex and the Adobe Flash Player everything is fine. I even can use the Adobe Paltettepanel to integrate my Flex applications in Adobe Indesign.
But when I want to use the Palletepanel in an Adobe AIR application nothing works.
My question:
Do Adobe Palettepanel and Air work together?
Thanks,
Alois Blaimer

I'll say for the moment no it doesn't, it has been requested and
probably in the future it'll work with AIR.
Sincerely,
Michael
El 11/05/2009, a las 2:05, alois2805 <[email protected]> escribió:
>
Hallo!
>
when I am working with Flex and the Adobe Flash Player everything is
fine. I even can use the Adobe Paltettepanel to integrate my Flex
applications in Adobe Indesign.
>
But when I want to use the Palletepanel in an Adobe AIR application
nothing works.
>
My question:
Do Adobe Palettepanel and Air work together?
>
Thanks,
Alois Blaimer
>

Do Palettepanel and Adobe Air work together?

Hallo!
when I am working with Flex and the Adobe Flash Player everything is fine. I even can use the Adobe Paltettepanel to integrate my Flex applications in Adobe Indesign.
But when I want to use the Palletepanel in an Adobe AIR application nothing works.
My question:
Do Adobe Palettepanel and Air work together?
Thanks,
Alois Blaimer

Hi Alois,
If I'm not mistaking than Patch Panel was designed for the Flex developers and I don't think it has support for AIR.
With best regards,
Barna Biro

Edege animate: Parallax and Spotlight = Not working together?...

Hi all,
This is my first post, and sorry for my English :))
I am learning, and have a small composition on Edge Animate CC 2014 on Scrolling Parallax, which works very well, and now I want to add a spotlight... but do not working together.
My code is:
Stage: 1920 x 2000
Autoplay: No
-- creationComplete: (nothing)
-- compositionReady:
EC.Parallax.setup(sym);
On scene:
A Text (is for launch the spotlight with the click function):
Action for "Text":
-- click
// Open image in spotlight overlay
// Set up configuration
var config = {
width: "1024",
height: "768",
type: "image",
source: "images/dog.jpg"
EC.Spotlight.open( config );
My problem is that the parallax works great, but when I make a click on the button that showing the spotlight... this is not released, and "dog.jpg" picture it is show on the bottom of the page (without spotlight).
What am I doing wrong?
Note: I charge via url the "All in One" of EdgeCommons CDN : http://cdn.edgecommons.org/an/1.1.2/js/min/EdgeCommons.js
Many thanks!

Ok. I've solved. I needed to load some things:
EC.Parallax.setup (sym);
The full code (that works for me) is:
-- compositionReady:
EC.Parallax.setup(sym);
// Load Edge Commons
yepnope({
load: [
"http://cdn.edgecommons.org/an/1.1.0/js/min/EdgeCommons.js",
// Load style sheet for the overlay
"http://cdn.edgecommons.org/an/1.1.0/css/style.css"
-- click
// Open image in spotlight overlay
// Set up configuration
var config = {
width: "1024",
height: "768",
type: "image",
source: "images/dog.jpg"
EC.Spotlight.open( config );
I hope to serve others.
Regards

Can Forms 6i and Personal Oracle8i work together?

Hi,
I am going to download
1. Oracle Forms Developer/Server Release 6i for Windows NT
2. Oracle8i Personal Edition on NT
Before download them, I want to know if they can work together. I want to learn Oracle database and developer 2000. If you have a better idea, please let me know.
Thanks in advance.
Sue

Sue,
If you're going to download them from the net, then good luck - I never managed to do it. I now have CD's for all the Oracle products and have Personal Oracle 8i and Forms 6i on my NT pc. It all works fine. You won't have any problems (as long as you get the software on CD's). For the username/password, just use scott/tiger to start off with.
Harry
null

I've downloaded songs from itunes and they dont work. i can hear only half of the songs . how can i solve the problem ??

the songs i've downloaded from ituens store dont work !!! what can i do ??

There was probably a network error while downloading, try to delete the song and redownload it.
Delete the version in your library.
iTunes Store > Home Page
Far right has Quick Links, click on purchased and sign in
Locate your song and redownload

CS6. Need to have time remapping and warp stabilizer work together.

This should be obvious for most people. These two effects must be made to work together.
If you're shooting with a glider you're usually moving very carefully (read: slower than normal) so the footage in post would need to be sped up plus stabilized a bit.
Currently warp stabilizer and time remapping cannot be applied at the same time. But I *need* it to be applied at the same time. I need a workaround.
Should I:
1. shorten the clips, export them, re-import them into the project, and then apply stabilizer?
2. apply the stabilizer, export them, re-import them into the project, and then shorten them?
How do I export individual clips as just seperate clips while Premiere? Do I have to drag them into an empty timeline one by one, apply the stabilizer/remapping, and export, remove the clip, put in the second clip, etc all one by one?
I've used Mercalli in the past and I time remap the footage and then apply Mercalli to the accelerated clip. Mercalli doesn't mind a bit.

ComputerNovice25 wrote:
Adobe might have written the code in a way that doesn't include the ability to deal with that extra variable. I'm assuming that when it's nested it then makes the timeline it's in just read it as a normal clip again instead of a clip with a non-supported variable included.
Although I'm totally just guessing, but if what I'm saying is correct it would mean a fix wouldn't be very much work at all. Which means in the future they could simply provide a quick and easy patch to fix this. I'd highly suggest to make a feature request.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Does Adobe read these feature requests? I often have a hard time justifying spending time to type out something when I feel like it's just being thrown into a black hole. I'm sure the team gets thousands of feature requests. It's like the lottery. Statistically you will never win. Sure, you'll never win if you don't play, but it's still a waste of time to play. I know, I'm pessimistic. Just don't have much faith in conglomerates - although Lightroom 3 is by far the most perfect program I have ever used and I would kiss the LR3 team if I could.
With Lightroom, Photoshop is hardly needed anymore unless absolutely necessary or for truly intensive chop-like edits. Premiere DESPERATELY needs a Lightroom equivalent.
I have half a mind to guess (nicely) that you video guys have absolutely no idea what you're missing out on, workflow-wise. It's life-changing. Literally.
I'm doing a video right now and I can't stop thinking about how if I had a Lightroom workflow, this video consisting of 40 clips, 40 titles, 40 transitions, audio tracks could be on the way to final export in 5 minutes. 5 MINUTES. And be 100% as good as if I had to spend an hour doing this in traditional Premiere.

Ati and compiz dont work together?

Similar Messages

Maybe you are looking for