ATP Customizing Integration Model

Experts,
I would like to use the ATP customizing integration model to do a one time transfer of ATP customizing from our ECC system to SCM. The model is found in CFM1. When I create the model and send it so SCM, I do not know what configuration transactions on the SCM side get updated. Can someone please give me a list of the config tran codes?
Thanks for the help.
Matthew Bruckner

Hi,
Before transfering ATP customization make sure that you have made below setting
SPRO-Advance planning and optimization-GATP-general settingsMaintain global setting for availability check---
set improt customizing as allowed
post transfer you can check following things APO-:
SPRO-Advance planning and optimization-GATP-general settingsMaintain buisness event(same as checking rule)
SPRO-Advance planning and optimization-GATP-general settings-maintain checking mode(requirement class)
SPRO-Advance planning and optimization-GATPproduct availability checkmaintain ATP Group(checking Group)
SPRO-Advance planning and optimization-GATPproduct availability check-Maintain checking control(Scope of check)
Post transfer again set import customizing to not allowed to prevent changes done in APO getting overwritten
Regards,
Santosh

Similar Messages

BOP selects products without an active ATP CIF integration model ?

Hello experts,
while setting up a GATP BOP Process I'm realizing that BOP is not automatically restricting the products from the loaction to which have an active ATP CIF model.
Example:
Location: 1000
Products: A, B, C
Product A is in APO for DP and SNP reasons and there is no ATP CIF model for A-1000 combination. Products B and C have been setup only for GATP reasons (but not for DP and SNP). If I run the BOP for entire location 1000 (product fiter = empty) it is picking all 3 products including product A and is rescheduling Sales orders for product A in location 1000 - although there is no GATP CIF model active.
Is this standard behaviour or do I miss anything here ? (I assumed that APO would never take a product into a BOP Filter which does not have an active and standing GATP integration model towards the ECC system.)
Regards
Thomas

Hi Thomas,
SAP documentation as in below URL
http://help.sap.com/saphelp_scm70/helpdata/en/9c/066f3928025a6ee10000000a114084/frameset.htm
states for filtering criteria in its pre-requisite . It appears that it only looks for materials filtered in BOP (i.e it does not look for materials meant for ATP check in its CIF).
However, let us wait for comments from experts.
With regards,
Mrinal

Issue in creating a custom data model from BP

Hi Team
We have a requirement to create a custom data model by copying data model BP. I have successfully created new data model ZP . I have copied the UI for searching from BP. Issue is when i search a business partner ideally it should not display any entries because i have just created the data model, But it is taking entries from BP and getting displayed. Please let me know how to map data model to search UI. I dont see option USMD_MODEL here

Hi Imran,
actually that is not an issue but a designed feature. I'm afraid that you need to re-think your whole project. The explanations is rather simple:
Data model BP in MDG is a so called Re-Use Area data modell. This means that active data (records that are currently not stored in a change request) are saved in existing SAP ERP data base tables like BUT000 for the business partner master data and LFA1 or KNA1 for Vendor or Customer master data.
If you copy data model BP to ZP you still refer to the same active area. You will always find the same active objects - no matter which data model you are actually using for the user interface. The only difference wil occur for objects being currently processed in a change request. In that case a separation between BP and ZP is possible. But this won't help to solve your issue.
From SAP side I can only recommend not to copy BP but to find a different way of integrating your project needs into BP.
Best regards
Michael

CIF - Integration model name and APO application

Hi Experts,
In the CFM1 Transaction, there are 3 mandatory inputs are Model name, Logical system and APO application.
Logical systems are customized in CFC1 transaction. I couldn't trace the model name and application creation.
What is the transaction to customize/Create the new Model name and APO application.
Hope this is very simple question to you and expect your soon.
Thanks,
Saravanan V

Hi Somnath,
Thanks for ur reply.
First I saved the selection as variant. But it was not updated in the IM table.
Then I tried to generate the model and now I can see the details when I use the F4 help.
So, to create a integration model need to generate the variant once.
Thanks for the confirmation.
Thanks,
Saravanan V

TVARV - Integration model.

hi
we currently use TVARV entries for specifying the materials in the integration models ( to CIF to APO). when we use a TVARV entry, we have a limitation of using only 500 entries at a times. so the number of materials in Integration Model is restricted.
is there any way not to specify the materials in the integration model but during runtime.
regards
Joe

Joe
Here is one way to solve the problem . Create a custom field in MARA . It will be a boolean field with values " " and some other non blank value say "Y" . For the materials that you like to transfer to APO , set the value of this custom field to "Y" .
You can enhance your integration model selection criteria and add fields to the IM selection. Add the custom field to the selection . Refer note 360723 . It explains how to add fields to IM selection
Save a variant of the integration model with value for custom field = "Y" . Now all you have to do on a daily basis is to go and set the custom field to Y for materials that you want to CIF to APO . This will make sure the materials get picked by the IM automatically.
Thanks
Saradha

Error activating integration model in APO

Hi,
I would like to have a solution to the folowing problem.
I've tried to activate integration models in ECC with transaction CFM2.
I've build several integration models for class, customer, masterdata and transaction data.
When I try to activate one of these integration models the system gives the next error message:
outbound queue blocked
Function/Q/SAPAPO/CIF_CBASE_INB
Text:        Reference product has not been classified
I would like to know what causes the problem and how to solve this problem.
I hope to receive an answer soon.
Thanks for the help!
kind regards,
Marco

Hi,
A program enhancement allows you to exclude the relationship between a product and a reference material from the transfer.
The prerequisite for this solution is that this "reference material for materials that can be packaged in the same way" is not required in SCM and is not relevant for the transfer.
Procedure:
Start transaction SMOD. Display the components of enhancement CIFMAT01. On the following screen, double-click function module EXIT_SAPLCMAT_001 (user exit '001' of function group 'CMAT', program SAPLCMAT). In the program editor that appears, double-click include ZXCIFU01. You may have to create the inlcude again if necessary. Implement the system response you want in this include (follow the sample coding given below).
Example:
DATA: LS_MATKEYX TYPE CIF_MATKYX.
LOOP AT CT_CIF_MATKEYX INTO LS_MATKEYX.
if link_to_RMATP_needed = 'X'.
    continue.
endif.
   clear LS_MATKEYX-EXTRMATP.
   MODIFY CT_CIF_MATKEYX FROM LS_MATKEYX.
ENDLOOP.
Regards
Vinod

CIF Queues generated without active integration model

Hello All,
We are facing a unique issue, where queues are seen in SCM queue manager although those products are not there in any active integration model for transaction data.
The scenario is as follows:
1. We are CIFing only master data as we have only DP and release to R/3
2. There is active integration model for master data
3. There is no integration model for transaction data
However in SCM queue manager, I am seeing queues of type CFFCC "Location" "Product".
The function module name is /SAPAPO/CIF_IRQ_REDUCT_INBOUND.
We observed in R/3 that the goods movement transaction code MB1A is trigerring TRFC's which is generating the queues.
Has anyone encountered a similar scenario like this?
Regards,
Kedar

Oi Jackeline!
Hello, all!
I think Vikas got the point, but let me be more specific...
The transfer of requirement reduction depended in previous releases (until PI 2002.1) only on an integration model for material master data being active. Then a new type of integration models was created to control the sending of requirement
reduction.
To activate the new logic a flag has to be set in customizing.
Use transaction /CFC9
OR
R/3 SAP Customizing Implementation Guide
-> Integration with Other SAP Components
-> Advanced Planning and Optimization
-> Application-Specific Settings and Enhancements
-> Settings and Enhancements for Requirement Reduction
-> Evaluate the Requirements Reduction Filter Object Type:
Then, flag 'Filter Object Requirements Reduction'
If you set this flag no queue of type CFFCC* will be sent if there is no explicit active integration model for Requirements Reduction. Please set this flag in production and delete any existing queues of type CFFCC*. No new such queues should be created in the future as long as you don't activate the transfer via an integration model.
I hope this information helps to clarify this issue.
Please give your feedback concerning the given solution.
Thank you!
Will

Integration model for sales orders failing repeatedly

Integration model for Sales Orders to APO is failing and in the CIF the error says "Customer requirement G BR 0082372353 900010 0000: liveCache problem, retu".
This error appears everytime you we run the integration model and it says in the Job log; ABAP/4 Processor: SYSTEM_CANCELED.
Note that this is "not" manually stopped but it still gives this error.

Hi Kailash,
Run /SAPAPO/SDRQCR21 in apo for the part contained in your delivery document, which is failing. While running the report, check the radiobutton, Build the requirements from Doc.Flow table. This will remove the inconsistencies remaining in the requirement table on R/3 side.
Try this and let us know, if you could succeed.
Regards
Sanjeev

EWM-ECC CIF Integration model

Hello All,
I want to tansfer data for plant,shipping point,customer and vendor from ERP to EWM.For this I have created Integration model.When I am trying to activate this I could not as I am getting message like'Queue for current initial data transfer is deregistered-Tgt System: APOCLNT800-Deregistered Queue' and hence Inbound queue blocked.
What could be the reason for this message. How to unblock this Inbound queqe?
Thanks,
Shailesh

Hi James,
Thanks. But this error is due to queue 'CFLD* System is not activating integration model and showing error like this'Operation terminated due to error (queue CFLD*, target system APOCLNT800)'
In SMQR I could not find this queue to acivate ,I tried in SMQ1/SMQ2, but I could not find this queue.
Do I need to create this queue? I yes I am unkown T.code for this. Do you have any idea?
Thanks,
Shailesh

Automatic generation of integration models

For Automatic Generation of integration Model we referred SAP Help and have done the settings as per SAP help.
     T code: CFC9
     Material Master Change Transfer         2 (BTE Transfer, Immediately)
     T code: BF11
     Maintained
     ND-APO     New Dimension PlugIn APO
     T code: SM30
     Table:     CIFIMODGEN
Connection pt     Counter     Program     Variant
MAT_INS        1     RIMODGEN     RSG_BTE
But system is not generating NEW Integration Model.
Reference from SAP Help:
Make the following settings to change to online transfer:
     Use transaction CFC9 to call the screen Change Target-System-Independent Settings in CIF. Under Change Transfer for Master Data, choose BTE Transfer, Immediately. As of SAP R/3 4.0B, you can make this setting in CIF Customizing in SAP R/3 under Basic Settings for the Data Transfer ® Configure Change Transfer for Master Data.
     Use transaction SM30 to call the screen Maintain Table Views: Initial Screen. Call table CIFIMODGEN. You see the screen Change View "Customizing Automatic Generation of Integration Models". You determine the procedure for adapting the integration model by making entries in this database table.

Did you run program RIMODGEN in SE38 with appropriate variant to generate new integration models ? The spro settings or CFC9 have nothing to do with generation of new integration models. try to do some forum search on Integration Models and you may get some clue.

Restrciting Deliveries in Integration model

Hi,
How can we restrict deliveries in integration model by dates? I see the option to select sales orders but not deliveries. Is it with any other name? How do I restrict it by dates?
Thanks.

Hi Raj,
While creating Integration model if select sales order option by default it'll activate deleveries , Quotations and
Customer independent requirements,As far as I,m concerned there is no restriction for date selection,You can restrict only by location product....
Regards,
Prabhu

Integration Models

Hi Everyone,
I am trying to activate the Integration Models in ECC.
I get message the following message:
"should the interval be created" options - YES, NO.
I would greatly appreciate, if you could help me understand, what this means.
Thanks & Regards,
Akshay

Hi Akshay,
This is the CIF customizing error.
This might because of material no. ranges or respective master data and transactional data no ranges are not created in both sides: ECC and APO.
Please check both Customizing places ECC in APO.
Also make the settings for Transactional data no ranges : e.g. Production Order, Sales order etc.
Hope this answer will give you some idea.
Please also check the Link:
http://help.sap.com/saphelp_scm50/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Regards,
Vishal

How to Create a Custom Integrator in R12 based on a Query set

Hi Everyone,
I am very much new to web adi. I got an unique requirement which I am finding it difficult. I did searched through the entire documentation/blogs/forums and I didnt find any suitable answer. Please let me know if anybody can throw some pointers here.
My Requirement is as follows
1) Using WEB ADI I need to update the data to collections responsibility ( I need to update unpaid reason code column and notes column for transactions)
2) So to start up with I need to design my excel template first with a query region to download the data. This query region may have 5-6 parameters like transaction number, customer name, customer number. When I click the submit button in query region, The data should be retrieved from database and should display in the same excel sheet.
3) Now for the data fetched from database, I need to update some of the columns and then again upload it back to EBS. I need to enable some of the columns to be LOV's.
Now My Questions are
1) Is this building a parameter based query then downloading to excel and then after modifying uploading back to EBS. Is this possible with WEB ADI. If this is doable then please let me know.
2) Unfortunately there are no interface tables or public API's available for collections responsibility then how one can update the data
Also
I was trying to create a custom integrator a basic one to insert the data to a custom table. I had used HR Integrator set up for creating custom integrator.Enabled all the profile options functions and menus. But now I am stuck at a point I am unable to create a layout whenever I choose my custom integrator and then tries to create a layout I get the following error:
No columns have been defined in the column list.
Once this can be resovled then I can fo for column mapping and then test a custom load. Can anybody please let me know what am I missing here after following each procedures.
Your inputs are appreciated. I am in great need of your suggestions pretty urgently
Thanks and Regards
Keshava

Hi,
The answer to your query is 'Yes'. You need to design a 'UPDATE' metadata type custom integrator. The custom integrator shall use a parameter based view to first download data and then use a PL/SQL wrapper/API to re-upload it back. The brief steps are listed below:
1. Create a 'UPDATE' metadata type custom integrator. Give a parameter list name, std/custom view for data download and a PL/SQL wrapper.
2. Create a form function and associate the form function with the custom integrator created.
3. Add the form function to the std WebADI menu for access.
4. Define a layout for the custom integrator defined.
4. To create a parameter use the standard integrator 'HR Standalone Query'. As a part of this integrator you can define the SQL WHERE clause (parameter based) that you will like to use with the custom/std view defined in the custom integrator definition.
Note: You can use a max of 5 parameters only. For each parameter, one needs to define the datatype and also the HR standalone query has a size limitation of 2000 chars in 11i10. You increase this length you may apply patch - 3494588 to get 4000 chars.
Hope this information helps.
Thanks,
Nitin jain

Why is a redirect not happening in a custom train model

Dear All,
I followed a post by Jobinesh here regarding supplying your custom train model in this post http://jobinesh.blogspot.com/2010/04/custom-model.html
Now, I am extending the ProcessMenuModel and to create my navigation.
I created a wildcard control flow to each of my page but I had set a redirect option also in each of my taskflow
view.
<control-flow-rule id="__22">
      <from-activity-id id="___33">*</from-activity-id>
      <control-flow-case id="__44">
        <from-outcome id="__10">employee</from-outcome>
        <to-activity-id id="__5">employee</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__11">
        <from-outcome id="__13">department</from-outcome>
        <to-activity-id id="__121">department</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__15">
        <from-outcome id="__16">manager</from-outcome>
        <to-activity-id id="__14">manager</to-activity-id>
      </control-flow-case>
</control-flow-rule>
<view id="employee">
      <page>/com/test/employee.jsff</page>
      <redirect/>
</view>
<view id="department">
      <page>/com/test/department.jsff</page>
      <redirect/>
</view>
<view id="manager">
      <page>/com/test/manager.jsff</page>
      <redirect/>
</view>My concern is this, why is it that when I navigate in the train, it is not redirecting to another view even though I have set it explicitly?
Thanks

Below links may helpful for you.
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/82-programmatically-navigate-trains-396873.pdf
http://docs.oracle.com/cd/E12839_01/web.1111/b31974/taskflows_complex.htm#CJHFBFIE
http://jobinesh.blogspot.com/2010/04/custom-model.html

How to get the custom integrator in Manage Document Links

Hi All,
My requirement is "Creating Word Documents Using Web ADI", I am following the document
Oracle® Human Resources Management Systems
Configuring, Reporting, and System Administration Guide
Release 12.1
Part No. E13509-02
From page no. 194.In that section, No.8. Use the Manage Layout Document Links page to create a link between the
integrator and layout and the Word template.
See: Creating Links between Template Letters and Layouts, page 2-33
2-33>>
Select Manage Document Links from the Web ADI menu.
But when I click on the "Manage Document Links", I couldn't see my custom integrator to associate my word document with my integrator.
I could see only the standard integrators.
How to get my custom integrator in "Manage Document Links". I could see my custom integrator in define layout but not in this page.
Thanks.
With Regards,
Kali.

Hussein,
Thanks for your reply.
I followed the
Note 360105.1 -Understanding and Using Web ADI in Oracle HRMS, and the section "Letters",
I could follow all the steps, except the following,
The reason is, when I click on Manage Documents Links, I am not getting my newly created integrator.
If I link a standard integrator "HR People Details" to my document, that is opening properly.
But I am not able to link my document with my integrator(which is based on my view).
c. Now link the template letter to the Letter Integrator and Layout.
If not already done so, Add the function WebADI Manage Document Links to your Web ADI menu, and give it a prompt of Link Document.
Select Link Document option , and Web ADI Mail Merge page displays. Choose your Letter Integrator. Link it to the Layout, and a list of template documents uploaded to the database is displayed. Select the template letter to be linked with the layout.
Thanks.
With Regards,
Kali.

ATP Customizing Integration Model

Similar Messages

Maybe you are looking for