Attach the same .mdf to SS 2012 Express

Hi,
I detach the relevant DB schema within SS 2012 standard, and then attach it to SS 2012 express. But I get this
TITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SS20122EXPR\MSSQL\DATA\my_schema.mdf'. (Microsoft SQL Server, Error: 5123)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.2100&EvtSrc=MSSQLServer&EvtID=5123&LinkId=20476
BUTTONS:
OK
is this way disallowed?
Many Thanks & Best Regards, Hua Min

Thanks all.
Erland,
I do backup and restore the Schema instead but I still get this
TITLE: Microsoft SQL Server Management Studio
Restore of database 'my_schema' failed. (Microsoft.SqlServer.Management.RelationalEngineTasks)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:\Program Files\Microsoft SQL Server\MSSQL11.SS2012\MSSQL\DATA\my_schema.mdf'. (Microsoft.SqlServer.SmoExtended)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.3000.0+((SQL11_PCU_Main).121019-1322+)&LinkId=20476
BUTTONS:
OK
while I've copied the relevant .bak file from
C:\Program Files\Microsoft SQL Server\MSSQL11.SS2012\MSSQL\Backup
to
C:\Program Files\Microsoft SQL Server\MSSQL11.SS20122expr\MSSQL\Backup
Olaf,
Can I have more details to have "scopy" to copy the files?
Many Thanks & Best Regards, Hua Min

Similar Messages

Is it possble to attach the same report painter in several groups of report

Hello,
We have about twenty reports in a same library that must pe spread in 5 groups of reports.
Is it possble to attach the same report painter in several groups of report
Thanks
Edited by: Hallouet_H on Jan 31, 2012 1:45 PM
My problem is answered : Technical limitations to group of report (sapnote 387916).
Report Painter Problem
Edited by: Hallouet_H on Jan 31, 2012 3:11 PM

A report could be attached to several reports group.

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Attaching the same function to multiple mouse actions

Please excuse my ignorance, I'm trying to learn, and upgrade
my old way of doing things. If I am going about this all wrong,
please let me know.
I'm attaching my code below. My question is, how do I trigger
this function with different mouse interactions with my movie clip
without having to rewrite it twice, like I've done here?
Thanks!

playHead.onRelease = playHead.onReleaseOutside = myOnRelease;
function myOnRelease(){
dragPlayHead = false;
stopDrag();
_parent._parent.demoClip.isPlaying = true
}

I just changed to Firefox and now am unable to attach any of my word documents to my e mail or online school pages. It says file is empty or cannot be found. I can still attach the same file if I go back into Explorer....Help?

I do no have any more details!

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

All emails except those received over last 24 hours, were suddenly deleted. Inbox, trash and sent all affected. Any ideas on why and whether I can expect more of the same? I use outlook express

I have had my ipad2 for over a year and this is the first time I have suddenly lost emails without warning. My inbox, trash and Sent all emptied leaving only emails I had received in the last 24 hours. Have no idea where they have gone or whether this may happen again. Did not have iCloud.

Try this:
Settings > Mail Contact Calendars
Tap your mailbox
Tap Mail Days to Sync
Choose no limit

Attach 2 of the same movieclips at once

is it possible to attach the same movieclip twice?
for example i have two buttons and both attack Main_Page however when i test the flash and error reads "Duplicate function definition"
is there a way of attaching the same movieclip more than once?
im using this code to attach the movie but when i add this code twice on two buttons duplicate error shows:
s_next.addEventListener(MouseEvent.CLICK, attachMovieclip);
function attachMovieclip(event:MouseEvent):void {
var addPage1:Page1 = new Page1();
addPage1.x= 0
addPage1.y= 0
addChild(addPage1);
thanks for any help

there are 7 buttons in total on the main page.
Under the contents menu:
Children Day - 1 instance name = s_gotoPage1
Yellow color day - 2 instance name = s_gotoPage2
Summer Festival - 3 instance name = s_gotoPage3
TWP Daily - 4 instance name = s_gotoPage4
The next page button (bottom right) instance name = s_next
the two red buttons up top link to page 1 and page 3
the page 1 button has instance name: s_gotoPage1a
the page 3 button has instance name: s_gotoPage3a
There are a total of 5 pages
The class name for these pages are as follows:
Page0 (main page)
Page1
Page2
Page3
Page4
i can also provide the fla source if needed

Recording vocals and guitar at the same time, using the Alesis IO dock!

Hi there!
I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
Hope someone can help :)

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Attaching the document to Equipment without DMS

Hello ,
I want to attach soft copies of documents to the equipment master. My queries are:
1. How do I attach the same without DMS?
2. Can I attach multiple documents to one equipment? If yes how many and how?
Regards,
Narendra Bora

>
narendra bora wrote:
> Hey Jitender,
>
> I am not able to find the service object . Can you please explain me step by step. Also tell me can i attach word, excel and image type of documents?
>
> Regards,
> Narendra
HI Dear
Go to change equipment ie02 , and youi will find service for object just before the
title Change equipment : General data
u can attach word ,excel and image here
regards
jitender

How to use 2 midi controllers at the same time?

Hi all,
I have an Oxy 8 usb keyboard and an old Roland drum machine hooked up through the mid in on my Firebox. Right now they control the same track (in Logic 7 Express) but i would like to use them to input midi to different track simultaneously. Would someone be kind enough to point me to the right page in the manual or, if it's not to much trouble, clue me in on how to do this?
Thanks for your time,

Sorry for the double post....
I really don't remember which model is the Roland 505: for sure I know the Roland and Boss drums series.
In my life I've had only one (maybe 2 but I remember only one) drum machine and it was a Sequential Drumtrak: it's dynamic was HUGE!
Now I enjoy the iDrum, the Reason' ReDrum (it's very similar in concept to the Sequential).
I find the interface of my new Ultrabeat (yes I'm on Studio, now) very ugly and the Ableton Live Impulse little useful.....
I have again a very old Yamaha SY77 synthesizer and some of its sounds are good for today music but I prefer VI: they are lighter, more flexible and stay in tune (if you want!).
So enjoy your TR until it's good for you!
cheers
rob

Is SQL Server Express 2012 the same as Enterprise, BI and Standard?

We are a software company in the process of modifying code to work with SQL Server 2012 & 2014. We are doing development work and testing on SQL Server Express 2012. (We plan to move to SQL Server Express 2014, soon.) Is SQL Server Express
the same code as Enterprise, BI and Standard? Will our tests and dev work be valid? Should the need arise at a customer site, will SQL Server Express database migrate to Enterprise, BI or Standard?

Hello,
Yes, you can use detach/attach or backup/restore. Alternatively, you may want to perform and edition upgrade
of an existing SQL Server instance when possible.
https://msdn.microsoft.com/en-us/library/cc707783.aspx?f=255&MSPPError=-2147217396
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Murder on the Airport Express (AE 1st Gen cannot find Wireless while plugged in in the same room as the modem, router and Time Capsule

First, the reason for my compounded frustration:
I wrote a lengthy, comprehensive post on this late last night. I submitted it and received a notice at this URL:
https://discussions.apple.com/___sbsstatic___/maintenance.html?start=0&tstart=0
It gave a message: "A yellow sticky bearaing the words, "We'll be back soon." and a typed message reading, "We are busy updating Apple Support Communities for you and will be back shortly." Needless to say, it never came back. This morning as I began trying to reconstruct the very detailed post I wrote last night, the Communities system offered me an opportunity to restore the post from last night. Sadly, it contained only a portion of the first line.
I'm going to try it again. The problem inherent in putting it all in words last night, is that I no longer remember the exact wording of the error messages.
I've never gotten this Airport Express (1st gen, purchased mid 2010) to work. I thought it was working, but working poorly. A green light on the device is, apparently, NOT an indication of connection to the wireless. It wasn't workingl.
Description of devices which use the network:
I have a Broadband network with a modem.
It is connecteed to my 2T Timecapsule (purchased mid 2010).
Connected to that is a 24 port Cisco Router.
Not connecting to that, though showing a solid green light, is my Airport Express (1st Generation, purchased mid 2010)
Connected to the router are many ethernet cables giving hard-wired access to:
Printers (HP 8600 Pro purchased 2012))
MacBook Pro (purchased mid 2010) and
IMAC (purchased mid 2010).
3 Apple TV devices (1st generation purchased early 2011)
1 Apple TV device (2nd generataion purchased August 2012)
Connecting to the Wireless Network are IOS devices (current IOS versions on all)
iPad 2nd generation (purchased the day it was available)
iPad 3rd generation (purchased the day it was available)
iPod (mid 2010)
iPhones (4S)
Description of Layout of Network/House
My home is approximately 70 feet by 25 feet.
All Networking hardware is at one end of the house, the south side.
Airport Express (1st Gen, 2010) has been placed in the middle of the house to boost the wireless access at the north end of the house.
Ethernet cables are installed under flooring with cable ends extending up through flooring, and are availble to all devices with Ethernet ports..
Description of Problem
Investigation of the wireless access dysfunction with the iPad (2nd generation, mid 2010) revealed no connection to the Wireless Network, in spite of glowing green light on Airport Express and Airport Utility screen.
Description of actions taken to correct the problem
Loaded Airport Utility on MacBook Pro.
Airport Express shows green light on screen.
Double clicked on Airport Express Icon
Message that Airport Express was unable to extend the network
Message changes suddenly to something about not finding the Airport Express
Airport Utility searches Airport Express, attempting to read its settings
Message appears: Device not found. Airiport Express was previously part of the network, and offers to let me "forget" the base station.
I exit the error message.
A yellow triangle bearing an exclamation point sits to the left of the Airport Express' Description
Airport Express shows green light (as always)
Clicking the link, "Other AirPort Base Stations" indicates no base stations can be found.
Moved Airport Express to the room at the south end of the house containing all network devices
Plugged it in with clear, completely unobstructed view of Time Capsule.
Light on Airport Express flashes yellow and then turns solid green (like always)
Bring Mac into the room at the south end of the house containing all network devices and the Airport Express with the green light
Close Airport Utility on Mac
Reboot Mac
Open Airport Utility on Mac
Airport Express still shows as it did in 1.1.7. above.
Attempts to check Airport Express' access to Wireless network:
Unplugged Airport Express HEY! THE GREEN LIGHT WENT OUT!!! ;0)
Disconnected all Ethernet cables.
Tested ALL devices for Wireless access.
All devices access the Wireless network extremely well (dot and three curved bars) EXCEPT
IOS Devices tested at the north end of the house. These devices show a blank where the wireless bars should be, and intermittently show a dot.
Followed instructions contained in a similar discussion about Airport Express not functioning:
Unplugged all Networking Hardware
Powered off all Equipment which access the Internet in any possible way.
Powered up all Networking Hardware, one at a time, in the order described in that discussion.
Powered up all Equipment which access the internet, one at a time.
Tested ethernet cablingAll equipment functioning.
Tested Wireless access:
Removed all ethernet cabling
All devices, including IOS devices, access the Wireless Network perfectly EXCEPT any placed in the north end of the house. Those perform exactly as they did in step 3.3.2.
Connected all ethernet cabling.
Plugged Airport Express into socket in the Network Hardware room at the south end of the house. I get exactlyt the same results as before. The lovely green light glows on the Airport Express. Airport Utility reports Airport Express cannot find the Wireless network and also says there are no base stations connected to the internet.
Still in Network Hardware room, I attempt to find other base stations by cabling the Airport Express to the MacBook Pro
Airport Utility shows Airport Express with a green light
I double click the Airport Express Icon
Box says connection is average and status is (green light) Extended Network.
I click Edit
I go through each tab. I note that in the Wireless tab, the Network Mode is as I had set it, "Extend a wireless network".
Under the Network tab I note that "Enable Access Control" is as it should be, NOT selected.
Under the AirPlay tab, I note that "Enable airPlay" is selected.
I click cancel and leave the Edit screens.
Curious to know if Airport Express can find the Wireless network now that the device claims to be functioning as an extended wireless network, I disconnect the ethernet cable from the Airport Express.
I watch the Airport Utility screen closely. Nothing is happening.
With bated breath, I double click on the Airport Express icon.
The popup box shows "extended wireless network"
I click on edit and we start the whole mess over again. (See 1.1-9. above)
Curious to know if cabling the Airport Express to the iMac (almost to middle of house) will offer hope and prosperity to IOS devices at north end, I unplug the Airport Express and carry its now-exhausted little body to the iMac, ethernet cable in hand.
As I unplug the iMac from its ethernet access, I'm informed by Cranky Boy that no way is he going to accept that as a reasonable solution to his problem. He will not live wireless while even one ethernet cable is poking up through a floorboard.
Cranky Boy is reassured when informed that, though the Airport Utility shows the Airport Express connected, merely double clicking on the icon produces the same result as laboriously described in 1.1-9. above.
After quieting Cranky Boy by reconnecting the iMac to the Ethernet, I return the Airport Express to the Network Hardware room.
Again, curious to know ... I reconnect the Airport Express to the MacBook Pro. I want to know if it will exrtend the Wireless network from its position one foot from the Wireless Network.
I close and reopen Airport Utility (as I always do, but forgot to write)
I click on the Airport Express icon (which bears a little green light like the other big boys).
BUT THIS TIME, when I click on the Airport Express icon, the pop-up box says my connection is Excellent, the green light status shows, "Extended Network" and clicking on "Extended Network" produces the same old `Airport Express was unable to extend the Wireless Connection.
I click on the Edit option.
I buzz through all the tabs. I cancel instead of update, leaving everything as it was (as I did the first time)
I decide to go back into edit and select "Internet Options" under the "Internet" tab.
Since I have no idea whatsoever as to what IPV6 is and what it governs, I decide to configure IPV6 to Automatically Connect and then, with a whole new set of opportunities, I leave IPV6 Mode set to "Tunnel" and then I learn that I will get to see what happens when "Enable IPV6 Connection Sharing" is enabled.
I check the other tabs to see if anything has changed in their menus
Jesus Saves and so did I.
Apple updates and so did I.
I am warned that my device and its network services will be temporarily unavailable if I continue.
It seems unaware that I am laughing uncontrollably at the suggestion that my device and its services will be TEMPORARILY AVAILABLE. What? An improvement in performance is warned?
Life continues and so do I.
I breathe deeply to decrease my adrenaline.
Airport Utility flashes a red warning next to the Airport Express Icon and then quickly rethinks the matter and decides to show it as connected.
I click on the Airport Express Icon. This time my connection is only "good".
I click on Extended Network. With a new-found consistency it informs me that my device is unable to extend the Wireless network and it chats with me about using the same Wireless password for my device that is used for the Wireless network access. I did. It is.
I change my settings back to the way they once were, I save like Jesus and Update like Apple
I decide to go back into Edit and modify the settings under the Wireless tab, changing from "Extend Wireless Network" to "Join Wireless Network".
I save.
I click on the Airport Express Icon. My connection has degraded further to "Average"
I click on edit just to see what will happen, but no further information is forthcoming. Settings are as I left them.
I wonder if the Airport Express would extend itself now that it has joined the Wireless Network.
I click the Airport Express Icon.
I click Edit
I change the Network Mode from "Join a Wireless Network" to Extend a Wireless Network. Unfortunately, there was no option for "don't forget where the Wireless Network is!"
I am still "unable to extend the Wireless network"
I disconnect the Airport Express from my MacBook Pro.
After closing and opening Airport Utility, I sit and stare at the Airport Express Icon.
It has no light or error messages
It has a yellow triangle with exclamation point
It has no light or error message
It has a yellow triangle with exclamation point
I finally decide to see what THIS error messages says. It says Device Not Found. Patti Harada's AirPort Express was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet. Click Forget to remove this base station from this network."
I click "Forget". Airport Utility has forgotten the Airport Express ever existed. It has also forgotten how to find it again.
I, however, am unable to forget how much I shelled out for this POS and fear I will never recover from working this intensely and tediously on documenting something so hideously inconsistent in its test results.
I wonder if I should recable the Airport Express to my MacBook Pro
I decide I've had about enough.
I document this ad nauseum in the hopes that someone can read it THOROUGHLY and offer me a solution to my problem. What is my problem? I am so busy fighting off Alligators that I forgot I only came in to drain the swamp! Ah, but I remember now: Cranky Boy can't watch Netflix on his iPad (2nd generation) in the north end of the house.
Any solution that works will do. I'll buy another piece of whatever kind of equipment you think best.

Well, aren't you all that and a bag of chips!!!!
Oh what a relief! What a RELIEF!
That just cleaned up my life. And Cranky Boy is actually smiling!!!
Houston, we've got dots AND BARS!!!
P.S. All my firware and software are always current. If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
P.P.S. Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!! Who knew?
Thank you so much, m'Lord. I am in your debt. What would you have me do?
Patti in Tucson AZ

Utility Airport can't see Airport Express on my MacPro, although the same AE operates properly with a MacBook Pro

I've unsuccefully spend almost three days on the web to find the solution to a particular problem.
The configuration I'm running is as follow:
- one Airport Express attached to the Orange box to communicate through internet
- one printer attached to the AE through USB
Two Mac :
- one MacBook Pro : it operates with no problem using the AE and the printer, internet is fine since I write this message with that Apple. The two machines may operate simultaneously under different or identical softwares.
- one Macpro : two points:
* the Airport utility does not see the Airport Express, but the AE logo is fully active on the computer and I can read information with Preferences/Network.
* the Network diagnostic, launched from the MacPro, yields GREEN from Airport to FAI included steps ( green LED), but fails at the Internet step (red LED)
The computers are in the same bench, the AE being at 2 meter distance with no shield in between.
The Orange box is proved fine since all the internet communications are OK when I use the MacBook Pro . The phone is fine as well.
There are no other WiFi in the neighbourg.
The problem occured on Sunday evening for an unclear reason, while I was trying to connect a window XP based PC to link to the printer using the same wireless network ( I miserably fail as well, although the PC sees the Airport Express, but no way to connect to the printer : this is another issue )
The full network is running permanently for a couple of years with no issue, no fault, no reset, no slow down, just fine !
Both machines use the same OSX 10.6.8.
Information system returns the same data when reading the Airport network file.
Of course, the Airport Express yields solid Green light .
I've already checked the trouble shoot procedures as recommended by Apple with no success.
Well, this is a major issue since I do need my MacPro to handle work that must go through the internet.
Any advise and/or recommendation will be highly appreciated.
Michael

Hello,
Finally, I solve the issue by re loading the mDNSResponder which has been deactivated for an unknown reason. The system is back to normal operation.Thank so much to the Krypted.com site to provide the appropriate command to handle theplist file.
Michael

Does Airport Express really communicate the same speed to both Mac and non-Mac devices?

Okay, so to fully understand my situation, here's a briefing: Our old Netgear router was not pushing nearly the speeds we were paying for (we pay for 30 and were getting 10-15 max, usually much less). I recently got an iMac which means that all of my devices are now Apple made, so I decided to get an Airport Express to hopefully improve our wireless speeds. I set it up with the modem going in the WAN port and the old router attached to the LAN port so that it could still act as an ethernet hub for the few hard-wired devices knocking around. I set up both a network and a guest network, with our original one still active through the Netgear router.
I get 45 Mbps from the new network on my iMac, but my roommate is only getting around 9. If he connects to the old one, he caps out at about 25. Is the wireless card in his PC just not capable of receiving more than that? He insists that since it's an Apple router it is not as compatable with non-Apple products. Interestingly, I get faster speeds on my iPhone from the guest network than I can from either the new or old main networks in our house.
I know this is a really long question, but has anyone had this same problem? Any help would be greatly appreciated.
Also: isn't the wireless speed of the old Netgear router still basically being pushed through the Airport Express, as it's the only thing connected directly to the modem? Are there any settings I can change to make everything run smoothly? If the PC, Android phones, etc can connect to the new network at the same speed as my Apple products, then we can eliminate the old network altogether if that will help.

I think I answered my own question. I found this on the web:
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
Seems to suggest that using this third party exe to format it instead of windows inbuilt one will allow for partitions greater than 32GB. So this looks the way to go. And the 2GB limit per file is just for FAT16 not FAT32 apparently, but even if it is I only have a few iso/video files bigger than 2 gig so will just use a splitter on them.
Hope this is useful to someone else

Migration of the database from Microsoft SQL 2014 Express to Microsoft SQL 2012 Server

I posted a similar thread yesterday, and I realized that there was a serious typo.
Link: https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b3e201ea-6c7c-43a4-8908-842b714ea451/migration-of-the-database-from-microsoft-sql-2014-express-to-microsoft-sql-2012-server?forum=sqlservermigration
Therefore, I made a decision to post another thread right now.
I am
writing to ask if there are any known issues when migration from MS SQL 2014 Express to MS SQL 2012 Server version. Are there any step-by-step instruction on how I can go about doing this?
Looking forward to your response. Thank you for your time.
Regards,
Jeff Yoo

Hello,
SQL Server 2012 setup program won’t allow you to perform a downgrade from SQL Server 2014 Express Edition. Backup/Restore
and Detach/Attach won’t help you either.
One option you have left is using SQL Server Import/Export Wizard as explained on the following article.
http://www.mytechmantra.com/LearnSQLServer/Downgrade_SQL_Server_Database_P1.html
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Attach the same .mdf to SS 2012 Express

Similar Messages

Maybe you are looking for