Attachment not seen in PO created from SRM SC

Hi,
We try to send attachments from SRM shopping cart to Back end R/3. This attachment has to be captured in PO item.
But it does not appear there. We have made all relevant configurations.
When i search for the attachment in CV02N i can find the document created with the attachment and link is there between the document and the PO number.
Even when the DMS document is attached to the PO manually and then viewed again in the PO through ME23N i could not find the attachment.
I have made the same set of configurations in ECC6 and it appears to work fine.
regards
R.Rajesh

Hello,
Please check note 668062. Also make sure you have the most recent Java-Applet installed (note 1034072).
Kind regards,
Gaurav
PLEASE GIVE POINTS FOR USEFUL REPLIES

Similar Messages

Tax code determination when a PO is created from SRM

Hi Experts
I am using extended classic SRM 7.0
When a PO is transferred to the SAP backend system, sometimes the TAX code is different from what was supplied in FM BBP_PO_INBOUND.
It looks like; tax code determination in backend system determines a different code and does not use the tax code supplied when PO is created.
Is there a way to override this tax determination in backend system so that it uses the Tax code supplied rather than determine a tax code that is different?
This seems to be a problem when a new PO is created because when I change the PO and this sent again, the backend system is updated correctly with the Tax code supplied from SRM.
I hope some has come across this type of situation and can suggest something.
Regards

I put your HTML page (TEST2.html) and CSS file (body_new.css) on my server and it looks OK.
http://www.ossiningdesignguild.com/TEST2.html
It's possible your web server is not properly configured and sends a Content-Type HTTP header that says text/plain instead of text/css for your style sheet file.
If you're using Apache, have your server admin check the httpd.conf file for MIME type settings.
Should they need assistance, send them here:
http://httpd.apache.org/docs/2.2/configuring.html
This is not a problem with your main site since the CSS is embedded, rather than remote.
I'll call you after lunch.
Ken

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

Not able to post GR from SRM portal

Hi,
We are trying to post GR from SRM portal but getting below errors.
1) document type AA is not defined
2) check account assignment category.
Purchase order is classic type and having account assignment type as asset.
Is there any config which will map account assignment category while doing GR from portal.
Thanks

Hi Jagdish Reddy,
its already mainained account assignment category for ASSET in SRM IMG? and Also checked user has the acct assignment category AS in PPOMA.
Still we are facing this probelm in Qulity and it is not there in development. In development we can post GR from portal we are not able to see any errors in Developmet.
Please help me asap.
Thanks and regards,
Tirumala.

Hyperlinks not working in PDF created from Word

I have created a Word document containing hyperlinks but when I print it to a PDF file (using Acrobat 7.0.9 on Windows Server 2003), the hyperlinks look OK in the PDF file but nothing happens when I click on them.
In Acrobat, under Edit > Preferences > Convert to PDF > Microsoft Office > Edit Settings, the "Add bookmarks and links to Adobe PDF file" option is ticked.
How can I get the hyperlinks to work in a PDF file created from a Word document?

The original post did not indicate the method of creating the PDF. The result that was obtained was what happens when you print to the Adobe PDF printer. To get the hyperlinks embedded in the PDF, you have to use the PDF Maker (create PDF in WORD 2007).

User does not appear in group created from SAP role

Hello --
I have a user that has logged into InfoView successfully with SAP authentication and is showing in the CMC under the "User List." When I view the list of users in the group that was created from the SAP role he was a part of, he is not there. When I go to the user account and view "Member of," the group IS shown in the list.
Any idea? Any way I can "refresh" the group or anything like that?
Thanks
Casey

Thanks for the replies.
We are on XI 3.1 FP1.8 and we do have a CMS cluster. Server reboots this weekend seem to have resolved the problem. I am curious why this question was asked, though:
"Did you reassign the user to another SAP role after the user has already logged at least once in the InfoView?"
Is this something that could have caused the problem or is it a possible workaround if we run into the issue again?
Thanks again...
Casey

PO on R/3 not created from SRM Bid

Hello,
I create a contract on R/3 from a bid without problem but when i try a PO it is created only on SRM.
I´m using classical scenario, i define the backend system on
IF_EX_BBP_DETERMINE_LOGSYS~DETERMINE_LOGSYS
using
loop at item_data into line.
line-logical_system = 'BACCLNT202'.
line-logsys_fi = 'BACCLNT202'.
modify item_data from line.
endloop.
I implemeted bapi BBP_CREATE_BE_PO_NEW and BBP_CREATE_PO_BACK but the program dont go through them.
Do i miss some customizing??
Regards,

Hi,
We are having a very similar problem.
We have used the BADI BBP_DETERMINE_LOGSYS~CONTRACT_LOGSYS_DETERMINE.
If you look at the documentation for this it says:
"In the standard system, the system creates contracts locally from Sourcing and SAP Bidding Engine You can use this BAdI to determine a backend system. The local system used by the standard system to create contracts is XYZ4711. In the field CV_LOGSYS, you enter the logical system ABC0815 that links to a backend system. In this way, contracts are created in the backend system."
Based on this information we put the following code in this BADI:
CV_LOGSYS = 'CSC_Q01030'.
But it still appears as though the system is trying to create a local PO.
When we goto SM21 we see the following error:
BBP_PD 396 Purchase orders cannot be created without IPC pricing
This indicates that the SRM system is still trying to create a backend document or a local purchase order. We are using the classic scenario (not extended classic) and want a backend R/3 document.
Can you check SM21 in your system as well as look at the METHOD that we have used and try it in your system? Please let me know if any of this information helps or if you find another solution, maybe we can trade notes and resolve both of our issues!
Regards,
-Paul

Exchange sync not picking up appts created from Lotus Invitation

We have two iphones syncing with Exchange. Everything is working well except some calendar items. Appointments that were created by accepting a invite from a Lotus Notes user (via an attached .ics file) are not syncing. They appear correctly on the calendar in Outlook they just don't sync with the iphone. This problem started around 7/15/09 prior to that it worked okay.
Any suggestions?

Your responding much appreciated. Not aware that I need to make any changes re IPod settings. I frequently purchase/download music from I-Tunes and things have always run seamlessly, i.e. transferring the purchased songs into whatever playlists I want, or creating a new playlist and transferring songs from "purchased". Then the next sync between Ipod and pc picks up all the new additions. But not this time? So weird. I've changed nothing. So I don't know what I'm supposed to change (correct?) in order to get my new purchases onto the Ipod. Any further suggestions? I checked the link you gave me ... could see nothing more I could do. Cheers - Marg

Source indicator not updated after PO created from SOCO

Dear SAP gurus,
We are using SRM 7 with EHP1 and ECC 6 as backend. We are using plan driven procurement, but as we're not using XI/PI we're using program BBP_EXTREQ to transfer PR from ECC to SRM.
When the PR comes to SRM as SC, the source indicator is 'X', which is correct, as we can now do sourcing. We click propose source of supply, found contract, and the proceed to create PO.
Now when we come back to sourcing cockpit we still find the same SC sitting there. Checking in SRM, we find out that the source indicator is still 'X'. As per what I read from other post, it seems that there is field BBP-PDIGP-QUAN_PO_E which should be filled with PO qty, in this case the quantity is still 0 though the PO already created. (note that we schedule BBP_GET_STATUS2 and clean_req_requp per 2 minutes already).
This is confusing as we ONLY have this behaviour in our production system, but it works perfectly well in our QA system (source indicator changed to blank and QUAN_PO_E is filled).
Can someone shed some light on this?
Best regards,
John

Hello,
In order to eliminate if issue lies in the variant used for BBP_GET_STATUS2, you can execute this program manually and enter the cart number directly. Just to check if issue does not lie in variant.
Regards,
Ricardo

Hyperlinks not working in PDf created from Keynote '08

When I produce a pdf from File > Print in Keynote '08, the hyperlinks do not work in the pdf. I have tried all the various pdf settings (even the ones that export hyperlinks) and no luck, the links are not working in the pdf. If I invoke the File > Export > PDf command in Keynote, the hyperlinks do work, but Export does not provide as much flexibility in PDF creation that File > Print does, thus my need to go to File > Print.
Any suggestion?
Yvan

sandman39 wrote:
If I export to pdf in Keynote, all my saved hyperlinks default to http://livepage.apple.com/ (when the pdf is subsequently opened in Adobe Reader).
Are you sure that you really entered a link when you created an Hyperlink?
The described one is the one which is used by default by every iWork's components.
We must enter the true one by ourselves.
Yvan KOENIG (from FRANCE samedi 13 septembre 2008 18:05:31)

Spry drop down menu not working after page created from template

Hi all.
I created a template and the drop down Spry menu is working fine on local testing on my browser as follows:
I then created a New Page from this above Template. I did no alteration to this new page and just saved it as index.html but when previewing it in the browser, the Spry drop down menu is not working and the page displays as follows:
Here is my site map:
Any help to show where I am going wrong would be much appreciated.
Thanks.

Dear Nancy
Very grateful for your reply.
On Design View and Preview in browsers the index.dwt page spry works fine.
When I create a child page from this template page, the child page looks fine in design view but does the spry fails to preview in browsers (the spry just shows as words and not drop down menus).
Here is the code:


!/cooltext454549176.png|height=170|width=631|src=/cooltext454549176.png!
!/logosmall.jpg|height=58|hspace=0|width=150|src=/logosmall.jpg|vspace=0!
Disclaimer:
Studentshub is a platform for listing services as advertised/promoted by the Companies and individuals concerned. Studentshub does not endorse any of the contents on this site. Studentshub accepts no responsibility for any arrangements, purchase, contracts, agreements, refunds, failure to deliver services etc between individuals, landlords, clubs, organisations, companies etc. This does not affect your statutory rights (2009)
*Contact !/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!
Sitemap !/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!*
© www.studentshub.co.uk *
!/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!
!/cooltext454549388.png|height=138|width=700|src=/cooltext454549388.png!
[LIVE | #]
[CAMPUS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOUSE SHARE | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[RENT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[BUY | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WORK | #]
[EMPLOYMENT AGENCIES | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[PART TIME | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[VOLUNTEERING | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WORK ABROAD | #]
[TRAVEL | #]
[BUS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[TRAIN | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[COACH | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[FLIGHTS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[CYCLE | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[FUN | #]
[NIGHTS OUT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[DAYS OUT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[GROUP OUTINGS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOLIDAYS | #]
[UK | #]
[ABROAD | #]
[SHOPPING | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[BOOKS | #]
[BOOKSHOPS | #]
[USED BOOKS | #]
[HEALTH | #]
[NHS DIRECT | #]
[HOSPITALS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WALK IN CLINICS | #]
[DERBYSHIRE | #]
[NOTTINGHASHIRE | #]
[LEICESTERSHIRE | #]
[GUM CLINICS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOME | #]

</script>
</body>
</html

WhiteSpaceCollapse not working on textFlow created from HTML

Is there a trick to getting whiteSpaceCollapse to work with imported HTML? Here's my current code, where value is HTML text (e.g. "<p>Blah</p>.."):
textFlow = TextConverter.importToFlow( value, TextConverter.TEXT_FIELD_HTML_FORMAT);
textFlow.whiteSpaceCollapse = WhiteSpaceCollapse.COLLAPSE;
I've also set whiteSpaceCollapse on the RichEditableText to "collapse" but I'm still noticing vertical space differences if my external HTML has linebreaks between <p></p> nodes. Many thanks in advance for any suggestions.
-Robert

this is the way to solve this bug and no need for changing any xml settings , simple and it works
exporting the textflow:
var richTextXML:xml = new XML("<"+"richTextXML"+"/>");
richTextXML.appendChild(getCdataXMl());
private function getCdataXMl():xml{
var textFlowStr:String = TextConverter.export(textFlow,TextConverter.TEXT_FIELD_HTML_FORMAT
, ConversionType.STRING_TYPE).toString();
var textFlowXMl:xml = new XMl("<![CDATA["+textFlowStr+"]]>");
return textFlowXMl;
importing TextFlow from XMl :
var htmlTextInStr:String = richTextXMl.text();
var importtedTextFlow:TextFlow = TextConverter.importToFlow(htmlTextInStr,TextConverter.TEXT_FIELD_HTML_FORMAT);
textArea.textFlow = importtedTextFlow;

APEX_MAIL.SEND() not seen executing MY procedure from TOAD

Hi,
I have a procedure that calls APEX_MAIL.SEND and works fine when executed from within the app or in the APEX Workshop window.
Trying to execute MY procedure from an Oracle job we get an error unknown procedure APEX_MAIL.SEND
anyone have this problem?

Hello,
Why don't you use utl_smtp package if you are wanting to send email from pl/sql?
If you look at the help for APEX_MAIL its says:
APEX_MAIL
You can use the APEX_MAIL package to send an email from an Oracle Application Express application. This package is built on top of the Oracle supplied UTL_SMTP package. Because of this dependence, the UTL_SMTP package must be installed and functioning in order to use APEX_MAIL.
So APEX_MAIL will only work within a valid apex session and it won't be available to a toad session .
Cheers,
Paul.

Transfer attachment from SRM SHC to ECC PO

Hi,
Im working on SRM 7.0.Classic scenario.I need to enable the transfer of attachments from SRM SC to R/3 PO.Can anyone explain the steps to achieve the above?
Also in case of extended classic scenario,is the attachment transferred automatically from the SRM Local PO to ECC PO?
Thanks!
regards,
SRM Tech

Hello SRMTECH,
You have to do some configuration settings in SPRO
SPRO>Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Define Settings for Attachments.
We are also working for the same requirement. We have did following configuration / customization to achieve this.
- Activated BADI "BBP_CREATE_BE_RQ_NEW" in SRM and set the indicator as follow:
cs_ctrl_att-BE_DOC_TYPE = 'SRM'.
cs_ctrl_att-BE_storage_cat = 'DMS_C1_ST'.
cs_ctrl_att-TRANSFER_ACTIVE = 'X'.
- In ECC Side T.code DC10 and defined document type for SRM with following
Add a New Document Type SRM (if not already exists). Set 'Use KPro', 'Version Assign' and 'Change
Docs'. Set the Internal and External Number Range (02 and 01). Use MCDOKZNR as Number Exit.
Ver No. Incr = 1 and Set the File Size (Usually 10000000 bytes).
Once the Document Type is created, define Object links to PO Item and Pur Req Item. Use - Screen
Number 247 and Screen Number 248 with Valuation Object of EBAN and EKPO for Objects EBAN
(PReq) and EKPO (PO) for Doc Type SRM.
After doing this changes we were able to transfer attachements but we are still facing one issue as we were not able to open that particular document in ECC / R3.
See related threads for more pointers:
Attachment transfer issue from Shopping cart to Purchase req in ECC
Re: How to check the attachment in ME53N
Re: Sending attachments from SRM to SAP Purchase Requisition
Re: Attachments with follow-on documents.
Arshad

Attachment transfer of PO from SRM to Back end for extended classic scenario

Hi Experts,
We are using the SRM 7.0 with EHP 701 and ECC 6 , we have a SRM requirement where we need to transfer the attachment of a PO to back end ECC. I tried to implement the note 1594966 , but it doesn't work . we are using Extended classic scenario. Please suggest some SAP notes or the procedure to be followed to achieve this.
Thanks ,
Aishwarya.M

As far as I am aware this functionality of transferring attachment is not supported in Ext classic scneario
http://scn.sap.com/thread/1873708
Also I suggest you should debug and see if its sending attachment from SRM if yes then
could be something missing at ECC side , To debug use this
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=340264144
You may also check in SXI_monitor and see if attachment is being recieved and sent from SRM and ECC respectively
Are you configuring this for the 1 st time or its an error which u encountered?
You must raise a NOte to SAP for the same till a solution is found .
This one is another which you can check ..
http://wiki.scn.sap.com/wiki/display/SRM/Transfering+shopping+cart+attachments+to+the+backend+system

Attachment not seen in PO created from SRM SC

Similar Messages

Maybe you are looking for