Attempting to Restore my iPad 2 on Latest iTunes Version but Getting 3194 Error
I am trying to restore my iPad 2 on the latest iTunes version, but I am consistently getting the 3194 error. What is going on?
When I plugged my iPad 2 into my computer, I saw a popup stating that the iPad is in DFU mode, which is weird, since I never did anything to it. It was working fine with iOS 5, but now that I'm trying to restore it, it will not allow me to.
Apple tech support documents for that error direct you to here:
http://support.apple.com/kb/TS3125
Similar Messages
-
While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!
Solving MSVCR80 issue and Windows iTunes install issues.
-
I'm trying to sync my ipad mini with itunes and i get an error message '' there is no free space on your ipad mini''..... any ideas on how to empty some space on ipad mini manually? currently i run on 6.0.2
iOS device backups are stored in your iTunes library.
Move your iTunes library to an external drive. -
i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?
Hello bajura007,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I installed the latest iTunes version but it didn't worked
I installed the latest iTunes version to my newly formatted pc(windows) and then connect my iPad but it didn't recognized and didn't worked?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I just tried to install latest iTunes version and install failed. A pop-up stated "iTunes was not installed correctly. Please reinstall iTunes. ERROR 7 (Windows error 1114)." I have a decent-sized iTunes library that is not backed-up to the cloud. How can I either get back to the previous iTunes version that was functioning OR install a new version without losing the Library?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Tried to install latest iTunes update, but got "A program is trying to illegally
access C+ Runtime file.." and iTunes won't launch. Tried latest Windows update
Service Pack and no joy.Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I am using Windows 7 and had to deinstall iTunes as it failed on a previous instal. i was told to update my iphone to iOS 6 so that I could get the iOS 6 supporting version of itunes.
I have followed the FAQ to resolve install issues and have no apple software installed on my machine
During install I get a dilog box open, with a retry and cancel buttons with the notice that the iTunes install cannot access the following file:
C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69\GEARIFix.exe
In Windows Explorer I can open that directory, but that .exe is not present. iTunes installer thinks its locked
the files present are
Folder - x64
DIFxAPI.dll
DifXInst64
GEARAspi.dll
GEARAspi64.dll
GEARAspiWDM
sECURITY CATALOG - gearaspiwdmx64
Help!this is the latest version of iTunes10.7.0.21 x64. The error I get is
Error writing to file
C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69\GEARIFix.exe. Verify that you have access to that directory. Retry or Cancel?
Opening Windows explorer with hidden folders and files showing, I can access this directory. it contains 1 folder
x64. I can paste and delete a file to this directory, which confirms I have access.
Opening the folder x64, the following files are shown:
Folder - x64
DIFxAPI.dll
DifXInst64
GEARAspi.dll
GEARAspi64.dll
GEARAspiWDM
SECURITY CATALOG - gearaspiwdmx64
Opeing the folder x64, the following system file is shown
GEARAspiWDM.sys
I have tried all the steps to completely remove Apple software from my system as set-out in the FAQs.
I cannot delete the Temp directory as there is one file
FXSAPIDebugLogFile
Where I get the file-in-use-error
The action cannot be completed becuse the file is open in Windows Explorer
I have tried the steps advised on Apple support 5 times now but always -
itunes isn't recognizing my iPhone 4s. I downloaded the latest version of itunes today, but i have older version of the operating system (version 6.0) on my iphone.
I find itunes and apple extremely frustrating with the constant compatibility issues. So sick of itunes!http://support.apple.com/kb/ts1538
-
I have tried installing new version of itunes on my pc (windows 7 64 bit) but I keep getting an message saying MSVCR80.dll missing. Can amyone tell me how to resolve this please?
I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck! -
I get the message "iTunes was installed incorrectly. Reinstall iTunes. error 7 (windows error 127) And the following message. I have uninstalled ALL Apple software twice but the problem remains. Can anyone help with this?
problem solved see https://discussions.apple.com/message/24604581?tstart=3#24604581?tstart=3
-
Hi,
Getting Runtime Error 6034. When I attepmt ot follow the suggetions to rectify this issue, I get the erroe message that anothe program is tryin to install. Wait until it's finish and try install again. 'Install'????? I clicked UNinstall!!! How can I find if something is trying to install? I am not installing anything. HELP!!!! PLEASE!!!!I get the erroe message that anothe program is tryin to install. Wait until it's finish and try install again.
Restart the PC. Can you complete the uninstalls now, or do you still get the message? -
HT4061 How to restore my ipad after downloading itunes?
How to restore my ipad after downloading itunes?
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring:
Verify that you are using the latest version of iTunes.
Back up your device.
Transfer and sync content to your computer.
Restoring your iOS device
Connect your device to your computer.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. Select the Summary tab, and click the Restore button.
Click Restore.
After a restore, the iOS device restarts. You should then see "Slide to set up". Follow the steps in the iOS Setup Assistant.
If needed, restore your device from a previous backup.
If restoring does not finish successfully or if a restore error appears, see iOS: Resolving update and restore alert messages.
Additional Information
If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again.
Devices with cellular service should activate after a restore. If activation is not successfu, see the options below.
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance. -
My ipad has latest iTunes (11.1) but iTunes on my computer (mac 10.5.8) is now no longer compatible with ipad software and cannot sync. The same error message appears saying my computer needs to update software, but my mac has the latest software available (albeit rather old). Can I undo the software update on ipad??? Thanks
Thanks for your response, Niel. Is there no way of removing the last update from my ipad????
Appreciate your help
James -
Tried to restore but get "unknown error occurred (3194)". Please can anyone advise?
Thank-you,
RosemaryHave you got the latest version of iTunes on your computer ? There is some troubleshooting for that error code on this page which you could try.
Maybe you are looking for
-
IPod touch 4G keeps flashing battery in lock screen
I plugged my iPod 4G into my new windows 8.1 laptop and I keep getting the battery/charging symbol flash on my lock screen when plugged in. My iPod worked completely fine in my windows 7 laptop, there is nothing wrong with the iPod or the USB as far
-
I had an awesome list of my bookmarks before and one day all but three vanished. I don't remember updating or installing anything new. Anyway, I tried to import bookmarks from a few days before and then they all disappeared! Now I can't add any new o
-
How do I make a photo the "original" of another photo?
After importing my old iPhoto Library into iPhoto '08 I found that all the edited photos and the originals had come over separately. I want to take those original photos and make iPhoto recognize them as the original file to these edited photos. Is t
-
Is RFC destination is required for accessing BAPI from java/VB program.
I am not able to understant that all BAPI are Remote enabled ,but no where I observed that RFC destination is required. Can any body tell me exact flow and things step by step. Any example/full source code so that I can call from java program. I have
-
How to decalre a currency variable
Hi all, how to declare a currency variable of length 23 and 5 decimal places . please help me