Attempting to run Service report with different parameters- No data

User wants to run a report to display all of the Service Calls(different parameters have been entered to test) and no data is brought back. There is an error in the status bar Message 131-85 No data. But if another user runs the same report there is data.
Have checked Authorisations and all is OK.

I worked through this issue and found that one of the parameters had a blank selection but this incorrect. Once we changed the selection that data came through.

Similar Messages

Using Reporting Services Web Service methods to run a report with query parameters

I'm attempting to use the ReportExecutionService methods to process a report that contains four parameters, two of them query parameters. In total, the report must execute two queries. The two query parameters are determined by the execution of
the second query.
So, I've read about GetExecutionInfo and SetExecutionParams. To quote the MSDN page for GetExecutionInfo, "Use this method iteratively with the SetExecutionParameters method to evaluate parameters that have query- or expression-based defaults."
Can anybody explain how to use this, or any other method, to execute a report such as mine? The first query gets the rows of the report; the second query gets the row count. LoadReport does not seem to do the trick by itself. I need to use the technique
described in the quote above, I think.
I could really use some help. Thanks!

Hello,
If I understand correctly, you create a local report which choose report from Report Server. You have two query parameters in the report which are returned by stored procedure. Currently, you cannot get default values for these parameters when run the report.
Based on my test, if we haven’t configure these parameter with Available Values, we can reproduce the same issue. Also, caching issue may cause the same issue. If the issue is persist, please delete the corresponding report in the report server. Then, redeploy
it to check.
There is a similar issue, you can refer to it.
http://social.msdn.microsoft.com/Forums/en-US/6a548d65-35d0-4a3e-8b64-3b7b655c76ee/ssrs-2008-report-parameter-default-value-doesnt-work-when-deployed
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Auto run report with default parameters in Viewer

Hi,
Can any one tell me if it's possible to automatically run reports in Disco Viewer with default parameter values?
For example, I have a worksheet with a parameter like 'Term like :Term Code' which has a default value of '%'.
When I open the sheet in Viewer I'm presented with the Confirmation screen with default parameter values displayed and then click OK to run report. Is there a way to skip the confirmation screen and just run the sheet with default values as soon as it's opened?
I tried using the 'Run Query Automatically' option in Query Governor preference but this results in Viewer opening the Edit Parameters screen instead of the confirmation screen.
What I'd ideally like to do is bypass both the Confirmation and Edit Parameters screen to automatically run the worksheet with default parameters as soon as it's selected.
Any thoughts appreciated,
Ien Hien

Hi,
Option 1
If the user is clicking on a URL for the report you could code the parameters directly into the URL thus, they are passed on startup. Section 13.5.2 Example 2 of the below URL provides an example:
http://download.oracle.com/docs/html/B13918_03/urlstart.htm#i1014363
Option 2 (Not Exactly what your looking for)
This would still require a user to click something but, if your passing a wildcard it should probably be considered,
If the parameter might be a wild card your better off making it an Optional Parameter which is now possible in Discoverer Plus 10.1.2. Thus, instead of passing an expensive % sign the condition will simply be ignored.
Hopefully this helps....
Jeff

BO xi 3.1 u2013 schedule a template for multiple reports with different column

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

Design a single template for multiple reports with different column order

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.

-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
    for Example...
          if(?Client in ['clientA','clientA']) then
                    <TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM

How to create a report with different page sizes

Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
Marc

Hi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to schedule a report with dynamic parameters

We need to schedule a Webi report with dynamic parameters then email the different result to different email groups. Is it possible to do this in scheduler? Please advise. Thanks.

there are 2 schedulers
1st CMS
the reports which does not have any input parameters, only then t can be scheduled in CMS
2nd in Infoview
if report has input parameters and if you want to schedule it, then you may need to schedule the report from Infoview
To have a email notification
configure the SMTP server in report JOB Server
Thanks,
Ganesh

Ho can I schedule a WEBI report with dynamic parameters???

Hello again!!
Here i am with another detail about scheduling, the thing this time is that ia need to schedule a report with one parameter every week but with a different value for the parameter every week.
This is i need this week to run the report SALES BY STORE filtered by week with this value 2011 - 45 (yyyy - num ofweek) but the next week the value for the same parameter must be 2011 - 46
is it possible??? i mean is possible to schedule a report with different value for the parameter each time that it runs???
I know that i can schedule a report with different values for a parameter to send it to severals users whith different data but the values for the parameter are the same every time that it runs and i dont need that.
Any help or clue will be very appreciated

Hi Elio,
Do you have access to modify your universe?
Then you should try Dave Rathbun's idea. Here is the link:
http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/
Note that you'll have to adapt it to what you need, in this case to the week number.
For example if you are using Sybase syntax you'd get 2011 - 46 with:
convert(varchar, year(getdate()))+' - '+convert(varchar, datepart(wk,getdate()))
So you'll new object in Universe would look like :
your_table.week = case when @prompt('Enter week','C',,mono,free) = 'This week' then convert(varchar, year(getdate()))+' - '+convert(varchar, datepart(wk,getdate())) else @prompt('Enter week','C',,mono,free) end
Adapt it to the syntax of the database you use. Then after creating this object in your universe you'll have to go back to your report and Edit the query and use this object in the filter area instead of a normal prompt.
When you have to schedule the report leave the prompt with the parameter 'This week'
Hope this helps
Regards
Erika
Edited by: PadawanGirl on Nov 8, 2011 3:35 PM

I'm getting the below issue when I try to deploy a report with Dynamic parameters, when I deploy it with static parameters I'm not getting this issue.

I’m getting the below issue when I try to deploy a crystal report with Dynamic parameters in BI Launch Pad, when I deploy the same report with static parameters I can deploy and run it. I have Restarted the BI server, still the issue exitno use. kindly help me on this issue.
“This error occurred: Adding Crystal Report "CrystalReport1.rpt" failed. The server with kind rptappserver returned an error result. Failed to copy the report file to the report object. Refreshing the report object properties might have failed. Failed to read data from report file CrystalReport1. Reason: Failed to read parameter object”.

BO does not run dynamic params through the report as would happen without BusinessObjects (BO) or Crystal Reports Server (CRS). When you publish a report with dynamic parameters to BO/CRS, the prompt is published to the repository so that it can be accessed through the Business View Manager (which can be installed as part of the client tools). In order for this to work a couple of things need to happen:
1. You need to be sure that you check the "Update Repository" box on the Save As screen the first time you publish the report.
2. Your BO/CRS user needs to have "view" access to the Crystal2013ReportApplicationServer in the Servers section in the CMC - in fact, the Everyone group should be given view access to the server in order for dynamic prompts to work correctly.
3. In the Business View Manager, the Administrator user needs to give your user, or, even better, a Crystal Developers group full control access to the "Dynamic Cascading Prompts" folder.
Best practice for dynamic prompts in a BO/CRS environment is to actually create the prompts in the Business View Manager. This will allow you to create a single data connection that can be reused and also create lists of values such that the same list or prompt can be reused by multiple reports. If you just create the prompts in Crystal, you will end up with multiple data connections to the same database, the prompts will use the whole query for the reports to get the dynamic values instead of just a focused query to the lookup table that contains the values, and there ends up being lots of duplication and chaos.
-Dell

Unable to run a report with chart

I have report rel.6 NT version installed on Windows 2000.Now I want to run my report with a chart.But after I finished the chart
wizard and try to run it,it gives me error.The error says that it is unable to create a PL/SQL Development Environment context.I also try it on Report Runtime
and it gives me error "REP-0074:Failure to run another product using SSL".Anybody out there can help me.Is it because of my operating system or ????

Charlie:
I think we might be dealing with a bug: I have the same problem. I'm stumpted as well. Let me know if you make any headway. I think it might be best to call Oracle tech support.
Paul

How do i run two threads with different sleep times?

How do i run two threads with different sleep times?
Ive got thread A and thread B, they both update a jpanel.
They both start when i press the start button.
However thread A updates every 250ms and thread B updates every 1000ms. i cant just run them both at 250ms becuase this will mess it up.
So for every four runs of thread A i want thread b to only be run once
Does anyone know how to do this?
Thanks, Ant...

ok, ive done it but now i cant stop it!
ive added buttons to start and stop, the start button works but the stop button doesnt. why doesnt "t.stop();" work?
    public void run() {
        while(t == Thread.currentThread()) {
            System.out.println("No " + t.getName());
            if (t.getName().equals("1")){
                try {
                    t.sleep(1000); // in milliseconds
                } catch (InterruptedException e) {}
            } else{
                try {
                    t.sleep(250); // in milliseconds
                } catch (InterruptedException e) {}
    }

Executing a Webi report with input parameters

How can I schedule a BO4 webi report dynamically? I have a set of tables which contains the required parameters for the reports and I need implement a mechanism which will invoke these reports with the parameters. Then I would want the reports to be placed at a specified location. I am told that this can be achieved using webservices integration. I just dont know how. Please advise.

Hi Sukanto ,
Check the below link for dynamic prompt during scheduling
http://scn.sap.com/community/businessobjects-web-intelligence/blog/2014/01/24/dynamic-default-values-with-prompt-in-webi-reports-based-on-bex-queries-in-bo
and file location check below screenshot
It might help you.
Regards,
Anish

Print same report with different watermark

i want to print the one report with different watermark
means suppose we generate the report and print the 10 copy of the same report but want 4 copy with one watermark and 6 with different watermark.
i have the number of watermark copy in the table .
pls give me the solution
regards
anurag

Thank you for your helpful response. What I am really asking is this -- when there is a CR2008 report based on db1, table1, and you want to use the SAME report with an identical table in a DIFFERENT database (db2, table1), can I easily use the same report? Or, do I have to generate another version of the report?
Thank you again.
David

How to create Report with different work sheets in XL Reporter

Hi All
I want to create a report in xl reporter where one report has multiple work sheets
Regards
Farheen

Hi,
There is no option to create report with different work sheets in XL Reporter. You may only use one sheet.
Thanks,
Gordon

Can CSS115XX have 2 service group with different upstream?

Hi,
Just to ask if CSS can support the architect that 2 service group with different upstream.
It seems if I set a default route then I can have only one upstream routing path.
Thanks.

you can configure mulitple gateway/upstream.
The CSS by default select the correct route....the one that corresponds to the inbound request.
So, if request came in from upstream-A the response will be sent through that same upstream.
This behavior can be modified with the following command :
CSS11503-2(config)# ip ecmp ?
address             Choose among alternate paths based on IP addresses
no-prefer-ingress   Do not prefer the ingress port for the reverse path
                      egress
roundrobin          Alternate between equal paths in a roundrobin fashion
CSS11503-2(config)# ip ecmp
Gilles.

Attempting to run Service report with different parameters- No data

Similar Messages

Maybe you are looking for