Attn: Ralph! Desperate Help

I have read all the threads on errors with ichat video chatting. My colleague and I are trying to video chat. We were getting an error -8 for a while. We changed our ports in ichat to 443. That seemed to work for about 1 day. Now we keep getting an error stating "no information has been sent for 10 seconds" or somethin like that. Im not sure what to try. We both have our firewalls turned off and are both using wireless routers. Where should I start?

What modem or router is this ?
It seems that I am behind and the Bumps have not let this drop low enough to be read as an old thread.
I have found it on page 3 where it has now dropped to and my catch up has reached (reading all unread posts oldest first)
3:45 PM Sunday; November 11, 2007

Similar Messages

I-pod completely frozen & in desperate help....

well my i- pod nano was workin extremely good.. but suddenly it froze.. now i have tried all the methods given here holdin menu and select buttons and all... it doesnt seem to start up.. even my computer is unable to recognize it... its completely frozen... well i took this up to the place where i bought it... they said to contact to the apple and ask for a replacement... now i tried lots of ways i still didnt finda method gettin my i-pod workin perfectly or contactin the apple people... my warranty date is also quickly runnin out...
can anyone suggest me a good method to solve this...
pls im in a desperate help...
thanks
pentium 4 Windows XP

you said you tried a reset? YOU PUSHED AND HELD the menu button and the middle button AT THE SAME TIME for 10 seconds? this may take a few trys and its best if connected to power.
KoDor

I need desperate help with Itunes for the SLVR

I have a set playlist for Itunes to take songs from and put onto my phone when it is connected. That playlist has 56 songs, but when I click autofill, it only puts 31 songs down. As I add more songs to the playlist however, it only takes certain ones. For example, for every 7 songs I download into the playlist, it only takes 2 or 3. The phone has tons of space but I don't know, need desperate help, thanks in advance.

i know i have the same problem the only one thing i have noticed that is consistant along with this problem is that songs that will not go on it are all of them have a higher bit rate than songs that do go on the phone but thats the only real thing i can notice so if someone can show me how to lower the bit rate if its possible that might be the miracle cure

I have a bad idea I might of blown up mu iPod touch 5th generation battery by a mistake, please any suggestions on how i could try and turn it on? It is completely blank and it had full charge before it shut off. In need of desperate help :-(

I have a bad idea I might of blown up my iPod touch 5th generation battery by a mistake, please any suggestions on how i could try and turn it on? It is completely blank and it had full charge before it shut off. In need of desperate help :-(
Would be very grateful if someone could get back to me
Thank you very much

- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ok in need of desperate help... apps or programs that make, making an elementary yearbook easy?

ok in need of desperate help... apps or programs that make, making an elementary yearbook easy?
the clock is ticking!!!

Search at MacUpdate or CNET Downloads.

In need of desperate help

Background on the game:
This is a well known simple two player game. The play takes place on two grids, the size of which is agreed through establishing X and Y co-ordinates within an XML file. The grids represent a map of a piece of ocean on which is arrayed the naval fleet consisting of an aircraft carrier, various battleships, destroyers, frigates, mine-sweepers and possible submarines. Each vessel occupies certain squares on the grid.
Im desperate for help in developing an applet which each player will run to create an XML document instance that holds the information about the players fleet. Any help would be really appreciated as i desperatly need some help.

XML Parser
http://java.sun.com/j2ee/1.4/docs/api/javax/xml/parsers/SAXParser.html
For usage:
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/index.html

Itunes has encountered a problem. desperate help please!!!

ok this is making me really angry. i am obsessed with itunes and now mine doesnt work. when i click on the icon a little box comes up saying:: itunes has encountered a problem and needs to close. we are sorry for the inconvience. if you were in the middle of something, the information you were working on might be lost. blah blah. and then if you click see what the data report contains it says--- this error report includes information regarding the condition of itunes when the problem occured; the operating system version and computer hardware in use- your digital product ID. which could be used to identify your license and the internet protocal address of your computer... and much more
I NEED HELP NOW i'm desperate. it's really bothering me i've deleted my itunes three times completly off my computer and downloaded it again and the same thing comes up... help pleasee!!!??
thanks so much

Alessia:
We can help you, but you've got to help us. Please provide the following information:
Computer Platform (if it's not Mac, then you need to repost in the Windows forum)
Hardware, including whether your iTunes music is kept on an external or secondary drive
Current version of the OS
Version of iTunes that you have installed
How you are deinstalling and reinstalling (instructions on reinstalling have been posted as a locked thread at the top of this forum)
Without this information, we can't assist.
Lita

My Flash player will not download. desperate help needed

I am at a complete loss as to what to do. Flash will not download on my PC windows 7 computer no matter how many times I try. I click on the link and go through the whole process of downloading the installation file but then nothing happens just a big black box popping up with no prompts and nothing being installed. I am at my wit's end and am in desperate need of what's wrong. Is it my anti virus software? Is it my firefox? I am in desperate need of help. Please advise ASAP.
Ken

The current version of Flash isn’t compatible with Mac OS X 10.5.8. Click here to check if there’s a compatible update.
(109033)

Desperate HELP with Random Numbes in an Array & Do / While

Please somebody help, I have been working this problem for over 7 days now and can't get it. I have tried everything from a while to a do while to this and that. I need to have an Array of 8 that when run will produce random numbers for output between 15 to 25. I CAN"T GET IT PLEASE HELP. I am new to JAVA and have done everything I can think of to resolve this. I even have purchased a new book and looked at every site trying to find a solution. PLEASE HELP! Here it is:
import javax.swing.*;
public class RandomArray{
public static void main (String [ ] args) {
JTextArea outputArea = new JTextArea ( );
int myArray [ ]; //array declaration
myArray = new int [ 8 ]; //allocating memory
String output = "Array values at initializatioon ";
output += "\nIndex\tValues";
for ( int i = 0; i < myArray.length; i ++)
output += "\n" + i + "\t" + myArray [ i ];
output += "\n\nArray values after assigning values within the range of 15 and 25";
do {( int i = 0; i <myArray.length; i++)
     while     myArray [ i ] = 15 + (int) (Math.random ( ) * 25);
output += "\n" + i + "\t" + myArray [ i ];}
outputArea.setText (output);
JOptionPane.showMessageDialog (null, outputArea,
"Array Value before and after",
JOptionPane.INFORMATION_MESSAGE);
     System.exit ( 0 );
The output that I need is in two columns one with the initial array 0-7 and the second should be random numbers 15-25. Please help, please

here you are :
import javax.swing.*;
public class RandomArray
public static void main (String [ ] args)
     JTextArea outputArea = new JTextArea();
     int       myArray [] = new int[8];
     String output = "Array values at initializatioon ";
     output += "\nIndex\tValues";
     for (int i = 0; i < myArray.length; i ++)
          output += "\n" + i + "\t" + myArray [ i ];
     output += "\n\nArray values after assigning values within the range of 15 and 25";
     for (int i = 0; i < myArray.length; i++)
          myArray [ i ] = 15 + (int) (Math.random ( ) * 10);
          output += "\n" + i + "\t" + myArray [ i ];
     outputArea.setText(output);
     JOptionPane.showMessageDialog (null, outputArea,
          "Array Value before and after",
          JOptionPane.INFORMATION_MESSAGE);
     System.exit(0);

I am in need of desperate help ... my Outlook (2011) is regularly asking for my password and throws up an error message (Yellow triangle)

I have done a bunch of google searches and as best as I can understand it, because I have 2 devices (iPhone, and now iMac) that are trying to look to the mail server at the same time, a problems exists.
My ISP is Time Warner by the way and is a rr (road runner) email address, a POP email as best as I can understand it.
Eventually, the mail does finally "break through" and is delivered but there is a time lag for receiving my mail. I thought that at first, it could be an "Outlook" issue, but successfully set up the "Mail" icon that comes pre-bundled on my iMac, and the same error message is being hit.
How can I PLEASE get some help ... I am beyond frustrated and KNOW that if I call Apple, they will blame Time Warner and RR and if I call Time Warner RR, they will blame Apple. Can somebodoy please help me before I lose my mind?
The error message I get is that my account is locked by another session or by maintenance and asks me for my password (which I know to be correct).

In mail, go to Window - Connection Doctor & report what the result is for your outgoing server ( usually the last item in the list of tested items )
is the outgoing server in mail entered exactly as on your pc?, you're using the same isp as before?
most of these type of issues are easily resolved - come back with a little more info + armed with your mail server details that you used on he pc.

Automation Problem - Desperate Help Needed

Hi
Was wondering if anyone can help or has had the sameproblem?
I have nearly finished a remix project in Logic and I amcoming to the final stages of automating effects etc.
All of a sudden, my automation is not recording on certain tracks.
I am simply trying to automate the cut-off on the Filterplug-in, but have subsequently realised that it is also happening with volume and any other type of automation.
I thought it might be something to do with the massive synth– but the same is happening with the EXS and ES2 etc.
I have done a lot of testing and opened up a new project andcopied over the settings and midi-regions and automation records absolutely fine!
I even tried to get round it by sending the output to a bus and effecting the bus then trying to automate the bus once adding to the arrange! No Joy! Still failed?!
It seems that it is a bug within my project?!
A black line appears and even if I try and manually drawautomation the line just disappears.
It is definitely not what I am doing, as I have replicated the process in a fresh project and it works fine.
Are you only allowed so many channels of automation?
Funnily, during my testing when I try and delete the trackto start a fresh – it says – 'Do you want to delete automation'! but there isclearly none on display and I am not hearing any!
It feels like a bug – but wondered if anyone else had any issues?
It is only affecting certain tracks, but I cannot see a correlation between them?!
I am about to start replicating everything in a new project! Huge job – but I need to automate forthe final mix and its due by Friday – I am really frustrated by this!
Can Apple help me?
Thanks in advance
Steve

Steve,
I haven't seen this behavior before, but it sounds like a corrupted file. It doesn't happen often, but it does, and can happen.
If you are not having similar problems in a new template, than moving everything over to a new session would be advised, at this point.
Logic 9's new track import feature will make this A LOT easier than it ever was.
Read up on how this is done, but you should be able to copy EVERYTHING over to a new session in one swoop

Desperate Help needed in using LabVIEW

Hi,
I'm a beginner in using LabView programming. Can anybody help with implementing Labview 6 and Keithley 2400 SourceMeter for data aquisition? I've wired up the hardware and have problem coming up with the software.. Any idea how to get started?

Hello giam,
I made wrapper vi's for the standard GPIB Read/Write functions to
handle errors (using green icons to distinguish them better). The "send
mult" handles simple strings (like standard GPIB Write) and array of
strings (you often need to send more than one string to a device). But
generally those icons have the same main functionality like standard
GPIB...
To send an array of strings you put the GPIB Write into a for loop and
connect the array as input with autoindexing enabled (as standard).
Maybe a small delay will help for some devices, the K2400 should do
without.
Edited: The greenish delay icon is just a standard "Wait ms" with
additional error cluster in/out to allow dataflow programming...
Message Edited by GerdW on 12-20-2005 09:25 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
GPIB_SendMult.png ‏10 KB

Desperate help needed to configure WVC210 for remote access?

Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.

Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window.

In desperate help with Dreamweaver Forms

I am looking to create a textfield within my form for viewers to enter a certain phrase or code to enable them to view my next page on my website. In other words, I am creating a simple game on dreamweaver were viewers have to enter a code within a textfield in order to view the next page once submitted. How can I tell dreamweaver what the word or code is for viewers to enter?? This code would have to be entered correctly, otherwise they would not be able to view the lext page (level 2). I have tried using spry validation but cannot seem to figure it out. Please if someone can help me i would be very grateful.

php will do this quiet easily if you can use it? A simple example of the code/form is below:
Copy code and paste into a new Dreamwaever document and save it as next_level.php The page sends the information collected via the form back to itself. If the person enters the correct code in this case 12345 they get taken to www.bbc.co.uk if they enter the wrong code they get a failure message. You can alter all of the above i.e., code and url to go to in the code below.
You can either use this locally if you have php set up or upload it to your server if it runs php.
<?php
if (array_key_exists('sumbit', $_POST)) {
$code = $_POST['code'];
if ($code == "12345") {
header('Location: http://www.bbc.co.uk');
else {
$responseMessage = "Sorry, the code you entered is incorrect!";
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
</head>
<body>
<form id="checkCode" name="checkCode" method="post" action="next_level.php">
<label>Code
<input type="text" name="code" id="code" />
</label>
<label>Submit
<input type="submit" name="sumbit" id="sumbit" value="Submit" />
</label>
</form>
<?php
if (isset($responseMessage)) {
echo $responseMessage;
?>
</body>
</html>

In need of desperate help 14yr old daughter's iPod is a mess.

When I plug it into the computer it is not showing up, although it makes the sound that it's connected. It just keeps saying "Do not disconnect" and is burning hot. I've tried to reset it and restore it. Now there are no songs on it. When I press select and menu at the same down, it powers down but then starts clicking. Any suggestions?
Thanks in advance for any help you can give me.
Sandra : )

When I plug it into the computer it is not showing
up, although it makes the sound that it's connected.
It just keeps saying "Do not disconnect" and is
burning hot. I've tried to reset it and restore it.
Now there are no songs on it. When I press select
and menu at the same down, it powers down but then
starts clicking. Any suggestions?
Thanks in advance for any help you can give me.
Sandra : )
Restoring your ipod would delete all of the songs that were on it. Is her ipod set up to manually take in songs or automatically take them in? It sounds like a harddrive problem. Did you get an extended warrantee?

Attn: Ralph! Desperate Help

Similar Messages

Maybe you are looking for