Audigy 2 platinum front panel not working!!!!!!

I have sound through desktop speakers through the back of the sound card(that works). I had to reinstall the drivers to get that to work. Best buy reinstalled the stuff a week ago so i think the internal stuff is correct. The headphones dont even get static on the front, and it wont read mics. Ive downloaded the lastest drivers, checked to see if stuff was muted. Did i miss a step or is the front just dead. Im recording soom vocals for a band audution and need this working really soon. Please for the love of god help.!!

Actually I'm having the same problem too here.
Did all the troubleshooting I could the only thing left is to test the AD_EXT cable.
Anyone able to give some advise on this?

Similar Messages

Audigy SB 2 ZS Platinum Front Panel not working-HELP

Hey everybody. I'm new to this forum, but not to computers. I built my computer about 4-5 months ago, and here are my specs:
Ultra MS Blue Dragon
ASUS P5GD
Intel P4 Processor 3.0GHz
GB GeIL RAM
6600 GT 28MB Video Card
Samsung 20GB SATA HDD
Lite-On and NEC DVD Dri'ves
Ultra X-Connect 500 W PSU
Creative SB Audigy 2ZS Platinum
I got the 2ZS platinum from a friend, but I already had a regular 2ZS. I plugged in his front panel to my old 2ZS. The front panel did not work. I then got his 2ZS, just the sound card, and plugged in the front panel. It still did not work. I installed all the software and drivers, and nothing. My sound card works fine, it is just the front panel that doesnt work. Does anyone have any ideas?
Thanks a ton,
Derek
P.S. The AD_EXT Cable fell apart a couple of times, but we put it back together. Could that be a problem? If so, where can I get a new AD_EXT Cable?

ttt

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Audigy 2 card with Audigy Front Panel not worki

I've just bought a used audigy 2 card with an audigy front panel. I have installed everything and have sound from the card to my speakers.
The front panel has a blinking light on the optical out and when I plug headphones into the panel, I can hear static and control the volume of the static from the knob on the panel.
I can't hear anything else through the headphone jack and can't get any input signal using the line 2 input on the front panel.
Connections and drivers appear to be OK, am I missing something......
Thanks,Dave.

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

SB X-Fi Titanium Front Panel not working

Hello,
I would like to fully use the Front Panel, because I own a 5. Surround sound system blocking all the backpanel slots. The problem is, that I simply get no sound from the front panel sound output, while the microfone works just fine. Is there some kind of special option to enable it's
The FP is properly plugged into my SB X-Fi Titanium. And it's also not broken, because the FP works perfectly with my onboard soundchip (though it seems to cause crackling in my headphones, so I cannot use it for it).
... Okay now the Mic FP is not working aswell, eventhough it did when I tried it the last time. I set everything I could, like choosing Headphone Mode, enabling FrontPanel everywhere and all that. So why is it still not working?
RIG: Win XP 32bit
Asus P7p55d
Creative SB X-Fi Titanium
normal Stereo Headset
Thanks in advance for any help!

Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks

MSI 180 front panel not working in both modes

hi,
I bought a msi mega 180 with AMD cpu, works quite nice for a barebone
Now the problem is the front panel doesn't work anymore. It worked before, but now it doesn't work anymore. I think nothing is changed.
I thougt the panel was broken, so I replaced it by a new version at an officiele msi distributor in NL, I placed the new panel. But nothing happened on that panel, on pc and hifi mode.
So I think the barebone is broken, anyone can tell what to try before I can conclude the barebone (motherboard) is broken?
btw, it's connected by 2 connectors, 1 looks like an audo connector the other one looks like a normal connector to me.

Hi,
I don’t think the front panel or the main board is broken I think its something else we haven’t figured out and MSI not willing to help us... I have Mega 865 and I have been having the same problem for almost 3 weeks now... sometimes it works and sometimes it doesn’t in both modes everything else will work normal except LCM.
Once it works will work perfectly until I unplug the power from the computer then LCM display will not start.
The problem begins when a hardware is installed the first time to get the problem I had just installed a pinnacle TV tuner when I took it off it came back the second time i installed a DVD rom but when I took it out still didn’t work I removed almost everything checked all cables and changed memory couldn’t get it work then I decided to put back everything TV card, DVD-rom, same memory back and still didn’t. Since it had happened before i was not convinced that it was broken then the second day I put the computer on and it worked on its own.. Now it works when ever it feels for it and take the day whenever.
Let me know if you find anything helpful.

Japanese font on Front Panel not working

Hi,
I am new on using LV and finds out that whenever I type a Japanese character, it shows garbage text.
System:
Windows 7 Pro 32bit SP1
Labview 2013
Problem:
Whenever I key in Japanese character, the result is garbage, however when I tried to export the VI, and when I opened the txt file, the character is written correctly.
Seems like only in the front panel the characters are displaying incorrectly.
I've attached the Locale settings and also the garbage in the front panel for reference, as well as the printscreen of the export txt.
Any solution for this one?
Solved!
Go to Solution.
Attachments:
Locale.png ‏34 KB
Garbage.png ‏5 KB
Exported.png ‏26 KB

Hi,
There are several ways to display foreign languages in LabVIEW front panel.
1. set “UseUnicode=True” in the LabVIEW.ini file.
2. use the app locale utility from Microsoft (http://www.microsoft.com/en-us/download/details.aspx?id=13209). With this tool you can run LabVIEW (or builded app) under different locales without changing system locale in Control Panel.
3. By default UseUnicode in the LabVIEW.ini file is disabled. Remove it or make it False if you've added the UseUnicode.
Then go to control panel>> Region and Language >> Administrative tab. Then in language from non-Unicode programs, select the language you want to use. With UseUnicode False, Windows will see LabVIEW and a non-Unicode program and enable this feature.
Maybe you can refer to the links below.
http://forums.ni.com/t5/LabVIEW/Doug-s-first-nugget-Unicode/m-p/2052682
https://decibel.ni.com/content/docs/DOC-10153
Hope this helps.
Warmest Regards,
Rebecca
Applications Engineer

Audigy Platinum Pro does not work for microphone!!! CREATIVE HE

I recently bought the Audigy 2 ZS Platinum Pro mainly for guitar recording. The external unit that i plug my guitar into plays alright through the LINE IN 2 (I find it works better when you don't put a line out to your amp), though not spectacular, but does not play at all through the LINE IN which is designated mainly for a microphone (which i use for acoustic guitars). Even when I try plugging the mic in LINE IN 2 I have to scream to make it just register, and when I do it sounds fuzzy and barely audible. When I first bought it a fortnight ago it seemed to work ok, there appears nothing wrong with my sound blasters and i have tried the recording on a number of different software programs.
The recording dial is cranked and although i don't seem to have the option to use the mic boost which seems strange as it is a powerful computer, the recording level on the sound desktop does not make a difference.
Can anybody help me with this? Is CREATIVE aware that this is common complaint and are avoiding the issue?
Is it something wrong with the hardware or the operating system - Windows XP Home?
If so, should I take the soundcard back? The recording capabilities were the reason i bought this card!

Update.....
Anyway, to resolve this problem (after some discussion direct with Creative Support) I discovered that there is a trick in the Creative Surround Mixer that is not explained (at all) in the documentation, not is it very intuiti've.
In the part of the mixer with all the sliders the box on the left (ie. vol, bass, treble) is the master speaker volume, the box on the right with the single slider is the recording level (the icon above the slider selects the source) and all the sliders between the two boxes control the levels of each source going to the speakers. To ensure a pure recording and prevent any of the input sources going to the speakers you will need to mute any input devices you have connected in this section.
To put it simply, if you don't want your microphone input to go to the speakers mute them in the mixer. Only the single slider in the box on the right hand side of the mixer panel will set recording levels.
Hope this hel
ps.
<IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-happy.gif" width=6 border=0>

Simultaneously Controlling LabVIEW Remote Front Panels not working properly

We are trying to simultaneously control a Executable file from different PC as per the description given in link below:
http://www.ni.com/white-paper/4867/en
But the issue is that we are not able to view it in Web browser as in "Web Publishing tool" When we click on "Preview in Browser" it Pop up a message " Web server not started. Do you want to start it now? We Click YES. Still nothing happens.
We have exactly followed the steps given in the "white-paper/4867/en i.e. Selected "Enable web server" and VI Properties to "Reentrant execution".
In Control Panel>>Administrative Tools>> Services we found that NI Web Server is available but NI Application Server is not installed. Is this is the reason why we are not able to Preview in Browser. If yes how to install that OR any thing else we are missing?
Thanks
R.B.Chavan

Mateus23 wrote:
I'm now developing the web version in HTML 5, using web services to comunicate with my labview application.
There you go, good solution. When doing this remember that you have access to the database on the server. A structure I have found effective is to use the server DB like a dropbox that I write to, and the web server reads from.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Audigy 2 ZS Platinum - Front panel issues

Hello there,
I originally had the Creative Audigy 2 ZS Platinum and all was fine. It all worked and the world was happy. I then (won't go into details) managed to damage the card and whilst I still got sound, the front panel and the joystick port would not work. As it was only the card that was broken, I purchased a new Audigy 2 ZS card assuming I would be able to just stick the front panel connector back on and all would be hunky-dory.
As you probably guessed, I am here, so all is not well. Whilst the game port now works, the front panel still does not respond to anything and I am at a loss. Is there some kind of jumper I need to switch or something? What have I done wrong.
All input is more that welcome, thanks...

i am having front panel issues. i think the damage to the card is a potential problem, but i don't think it's the cause for the panel not working. i think something is just seriously wrong with creative hardware. i really don't think pre-sales testing was performed extensi'vely enough. i have had more problems with my audigy 2 platinum in the 2.5 yrs i've had it than a new born baby. to make a long story short, i did a complete upgrade of my system, the only thing i kept was my case and audigy 2 and front dri've bay. i did nothing different than i had before, re-installed windows and everything. everything EXCEPT the front dri've bay works. i do get the red light from the optical out though, so there is power. i don't know what's wrong with this thing. all i can say is: creative you need to get your s**t together, you have as many issues with your sound blaster cards as microsoft has with windows. tech support: you need to do something for once and answer posts that people ask. i posted my question about this problem 7 months ago when it happened, guess how many repsonses i have. ZERO, NONE, NADA, NOT ONE RESPONSE. i don't blame forum users, not everyone knows, i blame tech support b/c you don't respond. i have no clue why, but do something, please.

Midi in from front panel stopped working (x-fi platinum)

8midi in from front panel stopped working (x-fi platinum)" Not sure if I burned the connector or if something is wrong with the driver. My midikeyboard can't be used with sb x-fi platinum anymore.
I borrowed terratec soundcard from big brother a while and used my midikeybaord in with that and output with x-fi card. but now he's taken the terratec back.
and I'd like to really know what's wrong witht he midi in.
Does anyone know what might be the problem?
I have connected normal midi cable -> normalmidi to tiny x-fi port convertor -> front panel
This used to work a bunch of months ago.
i'm using winxp latest updates. i'm trying out reaper. I've got asio4all installed but i usually use directsound when I'm composing music.
tahnks for any help

i have the exact same problem with vista!!!no sound from the front panel of x-fi platinum!i don't know what to do!

Problem with Audigy 2 Platinum Front Panel Input

0Problem with Audigy 2 Platinum Front Panel Input? Hey everyone,
Here's the background of the issue. I got a PS3 over the holidays for literally free
I had my computer out in a testbed style. Plugged the PS3 into my monitor HDMI --> DVI cable, and Red/White into the front RCA jacks of the Front Panel (Aux 2). As soon as I plugged in the cable, I got sound out of my speakers and was able to enjoy my PS3 in 720p
I put all of the components back into the case after cutting exhause and intake fan holes. I brought everything back to school, fired up the PC and PS3. Lo and behold, there is no more sound from the PS3. I know that PS3s are temperamental in moving, but I hooked the audio up to my TV and the sound came out just fine. The AD Ext cable looks like it's secure and in place. When I hooked up a mic and headphones to the front, they worked fine as well. However it seems to be just the AUX 2 RCA inputs that dont work anymore. Any ideas about how to fix this issue? Is there a function I have to turn on now in the software to allow sound to pass through? Any information would be wonderful!? I'm going to try an optical cable in the near future, just need to borrow one from a friend =/

Problem Solved.
I had moved my cards around for better airflow. I moved the SB Audigy card from the bottom PCI slot to the top. Thinking this might be the problem, I moved the video card back to the top slot PCI-E and the sound card to the bottom PCI slot. Sound is now working again. Thanks for the thread views?:smileytongue:
Think that when I have to buy Win 7 for real if the problem would still persist if I moved the card again? Or is this a hardware limitation?

Front case audio panel not working

I just bought a new case but the microphone and phones connectors at front are not working...
I know I have to connect them to the motherboard but I don't know if 'ts corretly connected cuz the names on the board manual are different from the ones in the case.
Here are the names in case:
MIC VCC
MIC DATA
GND
EAR R (x2)
EAR L (x2)
The connector on the board is something like this:
| 9|7|5|3|1|
|10|8|6|4|2|
and the board manul as this on it:
PIN SIGNAL DESCRIPTION
1 AUD_MIC Front panel microphone input signal
2 AUD_GND Ground used by analog audio circuits
3 AUD_MIC_BIAS Microphone power
4 AUD_VCC Filtered +5V used by analog audio circuits
5 AUD_FPOUT_R Right channel audio signal to front panel
6 AUD_RET_R Right channel audio signal return from front panel
7 HP_ON Reserved for future use to control headphone amplifier
8 KEY No pin
9 AUD_FPOUT_L Left channel audio signal to front panel
10 AUD_RET_L Left channel audio signal return from front panel
This is how I have connected:
MIC VCC -> 3
MIC DATA -> 1
GND -> 2
EAR R (x2) -> 5&6
EAR L (x2) -> 9&10
It's wrong right? Help...

I had the same proble double checked all the connections 20 times then I found the problem in software...
Look in the volume control panel for an option to enable the front jack. You will have to enable advanced controls. Then click the advanced button and check the mic2 select box.
if that does not fix it for you try this
MIC VCC -> 3
MIC DATA -> 1
GND -> 2
EAR R (x2) -> 5&6 reverse these (one should say out on it, out should be on 5)
EAR L (x2) -> 9&10 reverse these (out on 9 here)
My antec case came nicely labled for me with a thick manual featuring translations of their pin labels to the proper locations. Also It has a standard intel 10 pin connector AND the 7 individual wires if needed... handy huh.
Get a good case. But good luck.

Front audio panel not working on K9N Neo V3

A new problem with MSI K9N Neo V3 MB...
I just found out that Front audio panel is not working (no mic, no line out). I checked the cable 3 times. Seems to be OK. Front panel was working on a previous ASUS motherboard.
- All drivers according to vista are working fine.
- Back panel sound (eveything) is working fine.
- Sound panel says that front panel mic & line-out are not plugged in.
Is there a switch to turn this on? Or maybe some special driver?
Or it is just useless, and working on MB package advertisment only?

Quote from: Richard on 13-January-08, 06:50:13
P.S. Just a thought, I could go get a Ouija Board or Dart Board if you prefer. Might yield some answers.
You sure are funny. No doubt about that.
I do appreciate a good laugh, but in this case laughter won't solve my problem.
This little analogy with a car and a tire is just ridiculous. You know, tire is flat or it is not. Or is it maybe flat only on BMW cars?
I see no purpose in describing cables here, but if this is what would make you happy... It happens that I have few spare mintues, so here we go.
chapter 1. - The Case
I do not know what brand is my case. It's a cheap case with expensive Corsair 550W PSU. Very well cooled. I also don't know what is its name, so let us just call it George.
Here is George roaring on my desk;
Chapter 2. - Jimmy & Gina
This is an unknown brand, no name Front panel cable so let's just call it One eyed Jimmy;
This is local one tooth missing whore called Gina;
Chapter 3. - Encounter 1
Jimmy fills Gina just right. It's very tight but just right;
Chapter 4. - Berta, Gertruda and Mike
Dirty Twins Berta and Gertruda are ready to recieve some massive waves;
Big Mike is ready to give:
Chapter 5. - Encounter 2
It fits right again:
Chapter 6. - Oh NO!!!
It's not working on MSI AGAIN:

Temporarily freezing audigy 2 and firewire not working - sol

hi,
i had two problems with my audigy 2 using windows xp:
a) my firewire port didnt appear to work. i had only one device using firewire which was my creative jukebox zen. i could only transfer 95% of the first mp3 and then it would say that my mp3 player is not responding.
b) i experienced random and temporary freezes, not only while gaming but even when writing e-mails. everything would hang for a few seconds and then continue to work like if you write text it will appear after the hang.
firewire: i used my audigy 2 in my old pc with windows me and win 2000 without any problems. neither with firewire nor with the eax4 driver patch. under win xp i could only transfer mp3s via usb and that is slow as hell as you can imagine. i first tried if transfers using the firewire port on my mobo worked but it didnt, same prob. i found a fix from microsoft that is not listed in windowsupdate at http://www.microsoft.com/downloads/d...DisplayLang=en (KB885222). that did not solve this issue but maybe you need that too so I mention it here. then i found some new drivers on the creative site. "oh you fool, why didnt you say earlier that you're using old drivers?" someone might say but these drivers dont work or more specifically, its setup routine sux. it quits with "an error occurred". wow cool... but it appears as it unpacks the driver to c:\program files\creative\jukebox3 or something (note, i have a zen and not a jb3...) so I uninstalled everything, rebooted and told the device manager manually to get the drivers from that location. now it works.
freezes: it took me many, many hours to search the internet, but i found absolutely nothing. sure i'm using the latest drivers (yea they actually work), put the card in slot3 and stuff. then i found a post on this board that mentioned that this guy's audigy had a heat problem. it became too hot and hung. hmm. i have 2x 2cm fans sucking heat out of the box through the radiator of my water cooling so heat is actually mostly get rid of through water and whatever else produces heat (harddisc, video card ram etc) is cooled by some really strong air flow. so wth, this card has worked for almost 2 years in my old box. so i opened the case and saw that air circulation around the audigy was impossible as its sandwitched by two other cards. those parts that i was able to touch were not that hot but i dont know how hot the main chip became and i have no clue why a sound card can become too hot from playing an mp3... anyway, i have left my case open and since then i havent had any freezes. now i also know why the freezes suddenly appeared and not since after i setup my box 3 months ago: it was open until i had cut a hole for the radiator...
oh yea, its good that my expensi've creative stuff works and that it was not creative's fault but that of a moron of a user. now honestly, how is an average user supposed to get their product working when the knowledge base is totally outdated and gives advice such as "update your bios, get the latest drivers and dont put your card into the microwave", when mods in this forum give advice like the knowledge base and the driver is not even installable? creative products are not bad at all, they're not cheap at all too. but the support page is absolutely not informati've and the knowledgebase does not give solutions to known issues. i was never ever able to find anything useful there and i'm really really not an average user but a very experienced one. not everyone wants to use a pre-installed dell box with el-cheapo components. i like to put my own high-end rig together and things must be pushed to the limit BUT still be absolutely rock solid. let me list my recent experience with creative products during the past 2 years:
-) bought an inspire 6. surround system and even replaced my audigy with version 2 for it. but unfortunately the subwoofer had a problem. it randomly made a popping noise which was so loud that it pushed your adrenaline level to that of a base jumper. i then found out that the whole batch had some faulty component. at least i got a replacement within a week, so i thought "yea, great support".
-) bought a jukebox zen, 20gb with firewire. it worked great for almost a year. then it died. when i switched it on, only the creative logo appeared, thats it. recovery mode was inaccessible too. it took me 2 months to convince the support lady to let me return this junk. first they sent me a new adapter because maybe it was damaged and the battery was low and therefore it didnt work anymore... then i was told, ok you can have a new one but we dont have firewire versions in stock anymore. you can have a usb one now or you wait until we get the firewire zen again. i said wtf, you produce this so why dont you have them in stock? and the usb version is sure not an equivalent to my firewire player. woot after 2 months i got a new mp3 player... had to rip 250 cds again (i really prefer having originals) and copy them to the player, but ok, i'm happy again. no, i'm not. this one doesnt work properly either. everytime i dont use the player for more than 24 hours i have to rebuild the database and scan the harddisc. that takes about 0 minutes for like 3000 songs!! grr... but i didnt want to argue with the tech support about that, i can li've with that. maybe i can flash to an older bios if i find one somewhere. from what i read somewhere it is caused by the zen going from hibernate into "off power" mode and then it forgets a few things.
and now i had the two issues described above and had to find a solution myself because the support pages dont help at all. sure you can say i should have thought of a heat problem but all important components are watercooled (even the north bridge) and i had some good airflow in general, but not around the sound card. and who knows that the audigy is that sensiti've to heat and that a sound card even gets hot at all. i've never heard of sound card cooling... i'm not that disappointed about the quality of the hardware because it is ok imo, but with the horrible lack of quality of the support and the buggy driver installation. hey, you get free advice by your customers, think about that. they tell you by themselves what the problem is and what they think may cause it. sure many posts are just flames but you should take ppl here more seriously. and if other manufacturers are to blame then put a list together like: msi k8n neo2 platinum - in this case upgrade to bios .2 or in that case install this or turn on/off that.
alright, i hope anyone can use this information. sorry for the length but i wanted to describe things as precisely as necessary. cheers from austria.
(edit: a typo)Message Edited by Temujin666 on 0-05-2005 03:49 AM

Hi folks,?Initially my audigy 2 nx was not working. But after installing the drivers for vista it started to work. But unfortunately, the other application from creative media source is not working. When I press EAX it says '[color="#000099">the application with the device not found'. But the sound card is working fine.[color="#000099">?[color="#000099">I have even mailed creative with the details. They have sent me a mail with the drivers and an application driver. I have installed the application driver too, but still no luck.[color="#000099">?[color="#000099">Kind regards,[color="#000099">Jwell[color="#000099">?

Audigy 2 platinum front panel not working!!!!!!

Similar Messages

Maybe you are looking for