Audigy 4 Pro 24/96 drivers issue

Hi, I got one of these guys a few days back and I'm having some grief making the 24bit ASIO drivers work in Cubase SX. I get get it to work fine with the 16bit ones but when I select the 24bit drivers all the music speeds up to chipmunk speed and the sounds only play if you play from the start of the file.
i also get the error 'Samplerate could not be set. This may be due to the sampleclock being set to external sync'. The Clock Source in the ASIO settings is definately set to 'Internal', and there isn't an external option for it.
any help would be sweet
cheers

devinthedude57 wrote:
What is going on?
I know that the 24/96 is working because I can record audio in 24/96 in Creative's Mediasource, just not in Adobe Audition. From reading this thread, it appears that I am not the only one frustrated with this problem. Any suggestions?
MediaSource (as for an example) uses WDM (or MME or DirectSound) driver mode only (IIRC, you'll see only "Windows Default" and "Audigy [xxxx]" listed there ... no ASIO options available).
Have you tried
- just playback 24/96 audio using ASIO 24/96 (try w/ NativeInstruments BeatPort Player since it supports native ASIO)?
- to set the recording source through SurroundMixer since, it's possible that it needs to be set there and not in Cubase as like it's done w/ the ASIO 16/48 driver?
- those ASIO MME and ASIO DirectSound drivers bundled w/ Cibase?
BTW, if you use Asio4all drivers (which is a sort of WDM(/KS) wrapper), you should be able to record @ 24/96 just as easy as you can do w/ MediaSource (though, w/ much lower latency settings). Remember that you set the recording source in SurroundMixer then.
- http://www.asio4all.com
- http://www.native-instruments.com/index.php?id=beatportplayer_us
jutapa
EDIT:
IIRC, there also were some update for SE3 which had something to do w/ I/O's but I can't recall anymore if it was related into issues as this you're dealing w/ here?Message Edited by jutapa on 05-02-200701:17 AM

Similar Messages

  • [issue] Audigy 4 pro in vista 64-b

    Hey guys I was hoping someone might help me with this crap... I got my Audigy 4 Pro running on my new rig running vista ultimate 64-bit (used to have the card on a WinXP 32-bit computer), I got the sound working fine, the decoder is running fine, watched some movies on the bigscreen, but then I realized that I had a severe reduction in FPS when playing 3D games like World of WarCraft! im used to framerates ATLEAST above 50, and now I saw framerates hit 0! I thought wtf, maybe windows don't like running with two soundcards at teh same time, but apparently (after turning off and uninstalling realtek onboard stuff) it was still running slowly with the audigy 4 pro alone... well... I turned the realtek on again and removed the audigy from the computer and WUPS, everything is back to normal im running on +70 FPS again... Whats up with Audigy 4 Pro in Vista I can see alot of ppl are having problems with their soundcards in Vista, but it sure as hell shouldnt be our problem I payed (roughly) 300 Euro's for my Audigy 4 Pro, so the **bleep** thing better WORK! Is there a solution out there for this problem, i'd really appreciate it!
    sincerely yours,
    S ren Svenningsen
    DK

    nobody knows?

  • Audigy 4 Pro microphone problems in Win 7 64-bit

    Hi there,
    Since I put my Audigy 4 Pro card into my newer PC with Win 7 64-bit the microphone only seems to work when it wants to, or works but sounds messed up.
    I've waited a while before posting about this because I thought the newer drivers would sort out the problem, but it remains the same.
    The card/microphone works without a problem if I put it in a PC with Win XP.
    Sometimes the microphone will not pick up any sound at all. Other times it will work, but only for? game, say Heroes of Newerth. Then in Windows using teamspeak, people describe the sound like I'm talking through a fan. Tried using the in-game VOIP but I get the same result.
    After a restart or just some random day, people in Heroes of Newerth would discribe the VOIP from my side as if I was talking under water(or through a fan), but then it would work fine for teamspeak or Bad Company 2 or any other game. I used these 2 games as an example since its what I'm playing mostly at the moment.
    There doesnt seem to be any consistancy with the problem.
    I have recently removed the sound card from my PC and now forced to use the onboard sound that reminds me of the sound of a clockradio.
    My PC specs are:
    Asus Rampage Formula Motherboard
    Intel Core 2 Duo 3.0GHz E8400
    8GB RAM
    4 x WD Raptor HDD Stripe RAID
    ATi Radeon 4870 52MB
    Sound Blaster Audigy 4 Pro?(model number shown?is SB0290)
    Using?a Sennheiser PC350 Headset.
    What I have tried my side so far:
    Tried latest and older drivers for Win 7 64-bit
    Reinstalled Windows 7 several times with different drivers.
    Tried disabling all devices except for line/mic
    Tried other input devices.
    Tried with different audio and sound codecs, tried without any.
    Might have been or 2 other things I tried I cannot think of now.
    Is there anyone that experienced similar problems and got it fixed? Any help would be appreciated.

    Hi Bill,
    Can you be more specific about which steps were not recorded?
    There some things that will not be recorded. The release notes list some known issues.
    Known Issues:
    Tutorial Builder can only capture actions in Photoshop that are recorded by the ScriptListener plug-in.  While this includes most of Photoshop's functionality, some features/tools are not recorded.  In particular, brushing actions are not captured.  We hope to address this in future releases of Tutorial Builder.
    Some of the the actions that Tutorial Builder captures are not yet instrumented to produce detailed text instructions in the final tutorial.  For such actions, the generated tutorial will include a step that says "The (action name) is not yet supported by Tutorial Builder," and the tutorial author will have to edit the HTML to provide more descriptive text.  Note that the "Show me in Photoshop" link is still generated for such actions.
    Some Photoshop actions allow the user to specify a set of parameters in multiple ways, but Tutorial Builder cannot detect how the user specified those settings during the recorded demonstration.  Thus, the text in the generated tutorial may not describe exactly what was demonstrated.  For example, in the Image > Adjustments > Levels tool dialog box, you can update the parameters using three different eye droppers.  Since Tutorial Builder does not know which (if any) of these eye droppers were used, the text for a Levels adjustment does not describe exactly how the settings are specified.  Again, the tutorial author can simply edit the HTML to provide a more accurate description.
    Thanks!
    Mira

  • Audigy 4 Pro Hub Analog inputs problem

    &Analog inputs in Audigy 4 Pro external hub seem to be unsupported in Windows 7. Am I wrong?
    I installed latest drivers, set mixer to monitor sound from line in, also tryed win ASIO, but I am unable to get any sound from Line in/Mic in.
    Please help me clarify this issue, I?ve been trying to find an answer through different forums for hours! Thanks

    Issue solved... line in /Mic is now working. Audigy 4 pro analog input is supported using latest windows 7 drivers.

  • Audigy 4 Pro driver and MediaSource iss

    Just bought an Audigy 4 Pro card after getting seriously fed up with my old SBLi've 5. card, however I've got quite a few issues with it.
    I'm waiting on a response from Creative Support but figured I might check if anyone here can help.
    The bundled software with my card was the Audigy 2 ZS CD, and when I tried to install the drivers from that one it said it couldn't find an Audify 2 ZS card on my system and promptly quit.
    I tried a few ways to get around it but no luck, so eventually I downloaded the Audify 4 beta drivers (SBA4_BETADRV_US_2_05_0000.exe)from the Creative site.
    Those drivers installed and now my system show an Audigy 4 card installed with the following drivers: 5.2.3.00
    After installing the MediaSource from the Audigy 2 ZS CD I did not get any EAX control panel, Creative Mixer or Speaker setting though, so basically I'm stuck with nothing but my two front speakers making any sound at all.
    Creative MediaSource version: 2.02.06
    If anyone has a suggestion on how to solve this I'd be extremely grateful, because the current situation is quite annoying.

    The EAX Console, Speaker Settings and Mixer all came in the product CD. You must install them from the CD.

  • Audigy 4 pro not work

    i have a Audigy 4 pro and there is no power to the box every thing is pluged in so is it rma time

    Hello , I was reading your post on the audigy 4 pro, I recently upgraded my system, from an abit an8 32x sli motherboard, to an asus? A8n 32x sli deluxe motherboard, and ever since I have not been able to get power to my Audigy 4 Pro IO BOX< just like you were having.
    howevr my audigy 4 pro card is working cause i can still use my speakers, but the IO box is not getting power. I have latest drivers and motherboard drivers, would u possibly by chance have solved your issue, and if so how did you do it. cause I dont wana have to RMA, cause i think my warranty is up? any answers you have that solved your issue would be great. thanks.

  • Audigy 4 Pro + Windows 7 Please Help

    Hi
    First let me ensure you that i tried everything else before annoying you guys with my problem. an estimated 0 times of trying to get audigy 4 pro to work on win 7 with the original drivers and now i tried Daniel K.s Drivers. I appreciate what he has done to help so many with theyr driver issues, but sadly the driver isnt getting me far. first the informations about my system.
    Win 7 (64)
    Audigy 4 Pro
    7. Inspire T7700 Speakers
    Phenom II Quad 940
    Radeon HD5850 BE
    4. GB Ram
    Just realized an interesting fact. when my speakers are the standard device for Playing? sounds and not the SPDIF-OUT from creative wmp and vlc work with 7/7 speakers playing sound while the bsplayer only plays 2/7, but when the SPDIF is the standard and the speakers are the communication device(seems wierd) the bsplayer works(7/7) but the wmp and vlc only play sound from 2/7 . AND whats really hard for me, All games are only playing from 2/7? :mansad: its not fun to play Bad company 2 with sound only coming from 2 of 7 speakers (settings are all in order to support 3d sound so its not the game, checked that with several FAQs etc.)
    I would greatly appreciate any help to this problem, i wouldnt like to plug everything out and deinstall the drivers and loose my nice remote control and external receiver box since i just installed everything.
    Thanks to everyone who decices to help me in this matter.
    PS: In the windows sound setting test all speakers work perfectly, even with the normal drivers that mess everything else up for me.
    "Updated" tested newest drivers from Daniel K. no changes

    stacman70 :?Maybe try going into : Control Panel>Sound?See if you can locate "input 3" there, first check in the "Recording" tab. Set Default if you find it.

  • Audigy 4 Pro Driver Annoya

    Hi,
    I am currently experiencing issues with my Audigy 4 Pro drivers whilst trying to use SPDIF pass-through to my external decoder (and surround setup).
    I am running the latest beta drivers available through the website and until I installed these drivers, pass-through worked fine. Now however, my decoder is unable to recognise a digital signal from the soundcard.
    I am loathe to backpedal and install the old driver again because as well as a film enthusiast I am also a gamer and need the OpenAL support that the beta driver provides. In addition to that my PC used to suffer intolerably long shutdown periods using the original driver supplied on the CD.
    Can you tell me if this is a known issue, and if so will a stable release of the driver ever be made available? I find the issue extremely annoying as this was an expensi've bit of kit and I have previously owned both an Audigy and an Audigy 2 without having had any problems.
    Many thanks,
    Pete

    You obviously have not read my last post properly. If I go back to the old driver then I suffer horribly long Windows shut down periods again and also lose OpenAL support for games. It is definitely the Creative driver which causes this.
    Very dissapointed with creative on this one.Message Edited by pshuttle on -28-2005 05:29 PM

  • Audigy 4 Pro Problems in Vista Ultimate 64

    Hello,?I have Problems with the Recording Source Line in / Mic and What you Hear on my Soundblaster Audigy 4 Pro in Windows Vista Ultimate 64bit. I use the Beta Drivers 2.2.0002When i record over Line in / mic or What you hear sometimes the recording iss?distorted.When i restart my System sometimes it works sometimes not.

    I have not had that issue with an Audigy 4 with 32bit Vista. Don't expect to get many answers from Creative here though. I would use your onboard sound untill they get decent drivers out for Vista 64. Are u from Ohio Good luck, Diseaseboy

  • Audigy 4 Pro - Line In 3 Prob

    I have been having a huge issue with getting my Line In 3 to play audio from my Television and/or my DVD player. I sent my first Audigy 4 Pro back because I could not get the Line In 3 to work. Now I am having the same problem on a completely different sound card. My DVD player's audio out work just fine when they are hooked into the TVs in, but when I hook the DVD outs to the external hub's Line In 3 nothing comes out of my computer speakers. I am so frustrated with this sound card. Any help would be grateful.

    - are all other features working well in Ext. Hub (powerful enough PSU or is the additional power for the A4 PCI card taken from shared floppy power cable))?
    I've only ever used the Line-In and the Headphone jack on the front, they work fine. There is a red light coming out of the Optical out on the front (expected). The card does have a 4 pin connection and it is plugged in.
    - have you tried w/o other peripherals connected into Hub (just one through line-in 3)?
    Yes, same results (but ... see below).
    - have you installed latest drivers/software updates for your card?
    Where can I find the latest drivers at? I hate to download and install the wrong ones.
    - have you tried by uninstalling the CT software suite (least Surround Mixer) and control I/Os through Windows Play/Recording Controls (start run... mmsys32 and mmsys32 /r)
    I have not tried to uninstall anything and I type mmsys32 in the command prompt and get an error that it can not find the program.
    Update: I turned my computer off last night and turned it back on this morning, plug my RCA cables into my external hub and get a steady low frequency "buzz".

  • Audigy 4 pro in Vi

    My client has an Audiyg 4 pro that they wish to install in their system using Vista Home premium. The audigy 4 pro was isntalled in a windows XP. . can anyone tell me if their is an isntallation CD for Audigy 4 pro ?available for Vista and how I may be able to get it's?2. will all the supporting software that is available for the Audigy 4 pro function?I would deeply appreciate from anyone for help so that I am able to install the Audigy 4 pro. This client of mine is a VIP. Thanks in advance for you help. VSAT

    I have not had that issue with an Audigy 4 with 32bit Vista. Don't expect to get many answers from Creative here though. I would use your onboard sound untill they get decent drivers out for Vista 64. Are u from Ohio Good luck, Diseaseboy

  • Audigy 4 Pro - Trouble increasing/decreasing the volume using remote (RM 1500)

    NAudigy 4 Pro - Trouble increasing/decreasing the volume using remote (RM 500) As the title says, I'm having troubles with increasing/decreasing the sound volume using the remote controller unit - RM 500 on my Audigy 4 Pro.
    The sound volume inc/dec works just fine if I do it via the keyboard buttons, Audigy's External Hub or any other "software method", except when i'm using the remote.
    If i press + or - on the remote, only the left channel reacts.
    I'm using the latest drivers/apps (via AutoUpdate) over a fresh Win XP Pro / Audigy drivers (from the original CD).
    It does not have this strange behavior with the drivers/apps from the original CD, but only after installing the updated drivers. The reason i'm not keeping the original drivers is that a few years ago, when the original CD drivers were the only ones available, they caused the BSOD to my ex-system several times. It was something related to the fact I was using (and I still am) 4 DDR memory bars...
    I would really need some help on fixing this issue.
    Thanks in advance!

    R Thanks for the fast answer Loi.
    I downloaded the "ECUP_XPPCAPPBETA_US_3_40_2.exe" file but at installation start it gives me the message:
    "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup program. Setup will exit."
    PS: I just tried to install this beta app over the one i already have installed.

  • Audigy 4 Pro - No Midi in Audio Mixd

    I have an Audigy 4 Pro, which came with Cubase LE.
    In my recordings, I have midi tracks which have to be turned to Audio before the tracks can be added to the Audio mixdown. Cubase only makes one reference to this in the help files which says you must connect the output to the input on the sound card - which I suppose means that I would have to use a Y cable to route back to my mixer unless I wanted to unhook some of my speakers? Sounds like a hassle.
    Or is there some way to do this in software with Audio HQ? Use "What you hear setting" perhaps?
    I've looked at length through the help files and can't find any direct reference to this.
    It's a bit frustrating. Right now what I'm doing is saving the midi tracks, and then using ITUNES to convert them to Audio files, which is also a hassle.
    Anybody else run into this?
    Any suggestions appreciated - VelvetElvis

    Well I just got an email back from Creative Support and they reccomend I use Windows Media PLayer (or any other of the programs that do work) instead if it works 00%. I seriously hope they update the Entertainment Centre to actually work, I feel I am losing value of my Pro product very quickly as the remote now only has the function of changing the volume, not very satisfactory.
    I also feel it's rather ridiculous that they recommend I use another program than Creative's, it's a bit of a cop out, and they should really work on fixing the program soon.
    If the remote control could control Windows Media Player 0 when WMP0 is in fullscreen then that would be great, or if the remote control could be changed to be like a media keyboard in that it controls any media application rather than just controls that are visible it would be fantastic. Also if the power button could be altered to start an application then that would be great.
    Anyway creative, update the entertainment centre to fix this issue please!Message Edited by CrimsonCleaver on 04-03-20062:6 PM

  • Audigy 4 Pro - I/O Hub does not get any po

    Hello all,
    I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
    This somewhat sumarizes what I tried so far:
    . Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
    2. Also removed all entries of the old soundcard from Device Manager
    3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
    4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
    5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
    6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
    7. Connected the larger AD_Link to the card, then to the hub
    8. Connected the smaller AD_Link to the card, then to the hub
    9. Finally connected the power convertor cable to a free systems power unit
    0. Double-checked the entire hardware setup a few times and power the PC back on
    . Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
    2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
    3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
    4. Rebooted PC after prompting to do so.
    5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
    I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
    6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
    7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
    8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
    9. Uninstalled and reinstalled the drivers and applications: Same problem
    20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
    2. Set my BIOS to factory defaults: Same problem
    22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
    23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
    Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
    Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
    Thanks in advance!
    PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
    Message Edited by HilTek on 07-05-2005 :04 PM

    Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
    Thanks
    John
    AMD Athlon(tm) 64 FX-57 Processor
    A8N-SLI Premium
    NVIDIA GeForce 7800 GTX
    GB RAM
    WIN Pro x64

  • Audigy 4 Pro "beeping, cracking" where is créativelabs label quality

    I just installed my new audigy 4 pro with the Gigaworks s750.
    Well, all is fine with the sound quality but when i solicite more the system hard dri've, there is some loud bad noise that appaird.
    i contacted the heldesk, they told me to r?install my windows!
    I'm not really happy front of this lake of quality from cr?ati've.
    I used a AC97 chipset onboard before and no disturbing noise appaird during transfering files or open heavy applications.
    I seen in the forum that many X FI chipset present the same problem when playing games.
    The help desk ask me too to change the pci slot or install the audigy in another
    computer !!! thru!!
    I responded that is not my job to make the card working but , yes i can give some feedback to them.
    I think that creativelabs are front of a situation now that they slowly loose they good reputation with they new products that are not really stable and ready for the sale.
    But many companys use this system to put a product on the market.
    The first buyers pay the reshearch to finish the conception of the final product.
    where i don't agree is to pay so much amount of money for a product that they said is working (4 pro) but is still in prototyp or beta testing !!
    I will r?install my windows (it will be more fresh..) but i'm practecely sure that it will not fix this problem (like i read in http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=3426
    Hope that the drivers will fix this, and note a hardware problem (irq or latency from the card himself)
    hanny comments will be welcome...

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Maybe you are looking for