AudiMIDI Settings default

I have an emi6/2m (A 6/2) audio interface. Everytime I open Logic (7.1), my AudioMIDI setting defaults to 16bit (6ch-16bit). I record in 24bit but have to go into the AMS everytime to switch it to 24bit. The setting will stay at 24bit until I reopen Logic, and then it defaults back to 16bit.
Any ideas on to make the AudioMIDI setting default to 24bit?

Yep, got the 24bit checked in Logic, and in the AMS. The AMS just keeps switching back to 16bit when I boot Logic. thanks, Kendall

Similar Messages

Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the

Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the internet. But I still get the error: "itunes could not contact the iphone software update server because you are not connected to the internet." I also connected via iTunes and authorized the computer, but still have the same issue. Really, all I need to do is completely wipe the phone and start from scratch for safety's sake.
Help?

Did you check your security software settings?
Third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software.

How to make all settings default?

how to make all settings default?

What specific settings are you alluding to? More details please.
Ciao.

What is proxy settings default?

I'm wondering what is the proxy settings default setting? On my computer it is set to "Use system proxy settings" I'm wondering what should be the default the version of firefox I am using which is the latest version of firefox.

"Use system proxy settings" is the default in current Firefox versions and should work in most cases.<br />
Only if there are problems then you can try to select "No Proxy".
* https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
*Bug 500983 - "Use System Proxy Settings" should be default for new profiles.

CS-Order - Extras - settings - Default values

Hi,
in tx IW31 Menu -> Extras -> settings -> Default values it is possible to set a lot of values by default for a specific user.
Is this also possible somehow for a whole usergroup or all users?
The requirement is that all users from one salesorg shall have the same default values.
Is there maybe an userexit or BADI where we could influence this default values by own rules?
Thanks a lot.
Best regards
Manfred

Manfred
In ECC6 there is a new facility for changing most of SAP standard coding via functionality called the [Enhancement Framework|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc] .
This is similar to the user-exit/BADI concept in that any changes are automatically included in any upgrades.
If you are using ECC5, then talk to your ABAP team
NOTE: some functions are available in ECC5 too
PeteA

Unmanaged Disk Destination settings Default

Hi,
How can one change the u201CUnmanaged Disk Destination settings Defaultu201D option in any job servers to False?
I need all the users to provide their domain username and password while scheduling reports to the unmanaged disk. Present value of the metric is "True". I don't find any way to change it back to false. I cant also use the reset to default option in case needed, as other configurations will get affected.
Thanks & Regards
Karuppiah N

Hi Karuppiah!
I think there is no way to deselect the standards for the output formats.
You have following possibilities:
1. Teach your users, that they have to unmark the default, and have to provide their own entries.
2. Enter defaults for each report.
I thought about the file output for a standard user, but I came to the conclusion that it would be better if the users only use the email output for their purpose. The file output is only used by the admin to deliver reports to different systems.
ciao

How to disable the protetced view settings default in excel 2013

Hi,
whenever i open the excel or word document newly,it is asking "enable the protected view".By clicking the button only i can able to do the changes in the word,excel 2013 application.
I want to disable the protected view settings in excel . We are using Office 2013.
Please let me know where i have to do the settings in excel 2013 to disable the protected view permanently.
Regards
Pradeep

Hi,
Please see the article, and I've copied the steps about setting of protected view below
1.Click File > Options.
2.Click Trust Center > Trust Center Settings > Protected View.
http://office.microsoft.com/en-us/excel-help/what-is-protected-view-HA010355931.aspx
BWT, we also can configure the option as default via Group Policy.
Steps:
1.Open Group Policy Editing
Press Win+R> type gpedit.msc
2. Download the ADM templates
http://www.microsoft.com/en-us/download/details.aspx?id=35554
Extract the files to somewhere safe that you can reference again later if needed.
3. Add the template into the group policy into user configuration
You can do this by:
User configuration
Right click Admin templates
Add/Remove template
Add
Point it at the templates you downloaded
Ok
Close
4. Turn off protected view
Navigate into the new template will be called Microsoft Word 2010
Word Options
Security
Trust Center
Protected View
Disable - Open files on local intranet UNC in protected view
Enable - Do not open files in unsafe locations
Enable - Do not open files from internet zone
Enable - Turn off protected view for attachments opened from outlook
More Reference:
http://technet.microsoft.com/en-us/library/ee857087(v=office.15).aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Raid Admin 1.5 Settings Default Back

Why do the performance settings in Raid Admin 1.5 default back to an "all checked" state? I often shut down the Xserve RAID because I get tired of the fan noise. Is that the cause?
Anyway, I thought the FCP 5 dropped frames problem was with my AJA IO. It turns out it is because the performance settings are defaulting back to "Allow Host Cache Flushing" which is totally incompatible with FCP 5.

Hi Patrick
I had the same issue and here's how I got the settings to stick.
I opened the settings dialog and turned off the "Allow Host Cach Flushing", saved, then opened them again and turned off the "Use Controller Write Cach", saved.
I then opened the settings again and turned back on the "Use Controller Write Cach" and saved.
It seems that if you do several open and saves this way, it will finally stick when you shutdown your Xserve RAID and then start it up again.
I have two Xserve RAID's and it work for both of them. One save just doesn't change the "Use Controller Write Cach" setting it takes 2 or 3 saves with the "Allow Host Cach Flushing" left unchecked.
Mine finally stuck, after doing it this way, for both channels of each RAID.
Hope this works for you?

Camera settings Default

Is there a way to change the default camera settings - I would like to keep the flash off. Or change the exposure settings permanently.
Help?
Thanks,
Veepee
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930

VeePee wrote:
Is there a way to change the default camera settings - I would like to keep the flash off. Or change the exposure settings permanently.
For the N8 this has been answered elsewhere on forum:
Choose the "Spanner" icon on the bottom right of the main camera screen, and then select "Scene mode", select "User defined" and choose "Edit", Switch Flash = Off + change any other values to suit > "Set as default scene mode" = YES
Happy to have helped forum with a Support Ratio = 42.5

Image Color Settings Default

Hi, I’m having a problem with color profiles. When importing images through bridge into one of my Indesign documents the Image color setting is defaulted to the color profile of my image that I am importing. When I start a new document the default setting is “Use Document Default”. You can access this setting by right clicking on an image box in Indesign and going to Graphics -> Image Color Settings.
Why is the default import option for the color profile different for just that one document and how do I get it to always import with “Use Document Default”.
This is causing problems when we send our file to press because we are using GCR on the images and not having “Use Document Default” set is separation problems.
I’m running:
Windows XP
Creative Suite Cs3

Actually now that I look at your problem a little closer, I think you need something different from what you're asking for.
You are importing a CMYK image with a 340 TIL. You mention you need it to be Document CMYK, which is a different GCR CMYK from the image. In such case it is good that the image has the profile imported with it.
Output using one of the PDF/X standards. Select "Convert to Destination" without the preserve numbers. Document CMYK.
Native InDesign colors will not be converted. The LCP MaxK 340 will be converted to your Document CMYK.
Bottom line: if the images need to be in the Document CMYK color space, and you want InDesign to get them there, they must undergo the conversion when you output the PDF.

Outlook client proxy authentication settings default to basic

So we are moving our way towards exchange 2013 and something odd keeps happening. When you setup the outlook client (either 2010 or 2013) the proxy authentication settings keep defaulting to basic despite the fact that I have ntlm setup on the cas. This
then continues prompting users for a username and password. We could definitely teel them to click the remember this password button but I would like to make the upgrade as smooth as we possible can. Here are the settings:
ServerName ExternalClientAuthenticationMethod InternalClientAuthenticationMethod
MAILHUB2 Ntlm
Ntlm
MAILHUB1 Basic
Ntlm
Mailhub1 is the 2010 frontend, mailhub2 is the new 2013. All DNS and autodiscovery is flowing through mailhub2. Thanks for you help!

Hi,
From your description, I recommend you use the following cmdlet to check if the ClientAuthenticationMethod is set to NTLM.
Get-OutlookAnywhere -Server "xxx" |fl ClientAuthenticationMethod
If no, you can use the Set-OutlookAnywhere -Name xxx -ClientAuthenticationMethod NTLM cmdlet to set it and check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Why are mouse settings defaulting after 'switch user'?

change mouse settings from default for user A
switch to user B
switch back to user A
changes to mouse settings have been wiped and the default mouse settings restored
What is causing this and how can I prevent it from happening?
I've tried various things with user A like logging off entirely, rebooting, even making other changes in the settings that require an admin password in the hope that this might force some sort of admin override

Close all windows and quit all applications.
Hold the option key down and click the "Go" menu in the Finder menubar.
Select "Library" from the dropdown, then "Preferences" folder.
Look for these two files.
com.apple.desktop.plist
com.apple.systempreferences.plist
Right click each one of those and select " Move To Trash" from the contextual menu.
Restart the computer.

Search settings - default to current folder and "file name" ?

99.9% of the time, when I enter something in the search bar of the Finder window, what I want to do is:
1. search is the folder that I'm in
2. search for the "file name", and
3. then sort the results by "date modified".
Currently, problem is:
1. I can only change the search area (which defalts to "This Mac") after the search has begun.
2. Likewise, the default is "content"
3. There's not even an OPTION for "date modified". The "Last Opened" option is rarely useful.
Please help!
Thanks
ip
Message was edited by: ideapower

Francine Schwieder wrote:
The only one who can help us is Apple. Obviously you find this just as ridiculous as everyone else does who actually uses their computer to do things.
While I usually think this kind of sweeping generalization is unjustified, here I do not. Spotlight has great potential, but "ridiculous" describes the implementation perfectly. I'm not terribly upset by the default to search "This Mac" -- it really isn't much of a hassle to have to click the folder button -- but the loss of the ability to choose any folder or group of folders is exactly the kind of "regressive functionality" that should have people flooding feedback with complaints.
Just as ridiculous is the inability to show & sort on any of the metadata columns a normal Finder window offers. And if "Last Opened" is so useful in searches that it is the (unchangeable) default, why isn't it available in any other Finder view?
Plus, does anybody really understand how the "File Name" option works? It rarely seems to make a difference -- I often enter a search phrase, look at the results, then switch to the File Name option & still see files that clearly do not have the search phrase or any part of it in their names.
More: Try a search on Kind "Other" & enter the "Kind" info from a file's Get Info Box. Try "Application (Classic)" & note that it finds any you might have. But try "Application (Universal)" or "Application (PowerPC)" & you get ... nothing. Try just "Application (" & you get all apps. Try "Classic" & once again, any Classic apps show up, but try "Universal" or "PowerPC" & you get nothing. It's the same with many other file kinds -- sometimes the "Get Info" file kind string or some part of it works, sometimes not. Worse, the same is true for the "Kind" info taken directly from Finder windows. Try entering "Plain Text" in the Kind-Other search. I have hundreds of these but the search turns up exactly one, & it isn't even in my Documents folder.
(Before anybody suggests it, yes I have rebuilt the Spotlight index repeatedly, using both the Privacy pane method & Terminal commands, & it makes no difference.)
The point is not to rant but to demonstrate how poorly thought out & unreliable the app remains. I feel the problems are so obvious & widespread that we should not have to use the feedback page to tell Apple about them, but apparently we do. It really is as if it was designed by people that don't have a clue about what a search engine should do or how to integrate it into a user friendly environment.

PDF printing "Internal display" settings 'default'

Hi All,
I'm having problems PDF printing web applications made in WAD 7.0.
We have created a button triggering the EXPORT command and left everything set to 'default'.
Internal display = 'default', Data binding = 'default'.
All our 7.0 web templates contain text elements (title, etc.), an INFO_FIELD_ITEM block (with tray), a FILTER_PANE_ITEM (with tray), CONDITIONS_LIST_ITEM (with tray), EXCEPTIONS_LIST_ITEM (with tray) and one or more ANALYSIS_ITEM and CHART_ITEM (all with tray).
Everything except the FILTER_PANE_ITEM end up in the PDF, however not all present the tray. Only the conditions and exceptions have a tray in the PDF. Since the tray contains the name of what the it represents underneath, especially the analysis and chart item need to have the tray displayed.
How can I switch this on generically (not for each report individually)?
I don't know which Internal Display webtemplate is chosen when it's set to 'default'. It's not 0ANALYSIS_PATTERN_EXPORT, because if I set the Internal Display to 0ANALYSIS_PATTERN_EXPORT, my output changes completely (and not for the better).
Can I find the 'default' Internal Display somewhere in the system? SPRO? I'd like to adjust the default value to always display a tray.
Any input would be appreciated.
Thanks,
Eduard

Thanks Arun, but Excel export is not the issue.
All the info fields (title, user, date, webtemplate name, etc.) we can print and that's all fine. But... We need the tray of the ANALYSIS_ITEM and CHART_ITEM to be visible. The tray contains the name of the query (DP1, DP2, etc.) and we'd like to see it.
Now, if a webtemplate has more than one chart, the PDF will not tell you which chart is which. The title of the tray is automatically filled in the WAD (with the query name) and we don't want to manually add titles to all chart and graph items. We'd have to do this for all webtemplates, which should be necessary.
Besides, the conditions and exceptions items dó show a tray. Why not for the ANALYSIS_ITEM and CHART_ITEM?
So basically, what I'd like to know is: Where I can find which "Internal Display" webtemplate is used as 'default' and how I can edit it? I know that it isn't 0ANALYSIS_PATTERN_EXPORT, so which one is it then?
Eduard

Default settings, default settings

I wonder if I'm the only one who gets really annoyed when Numbers refuses to show what I type? I type "23 Jan" yet Numbers insists on typing "23 Jan 2011"
What I want is for Numbers to show what I type & nothing else! Is that asking too much? Why do these software writers think they're helping when they most certainly are not.
Does anyone know how I can set numbers to a default setting so it types what I ask it to & not what some geek thinks I want?

When you type in a cell whose format was not predefined by yourself, the app apply the Automatic format.
Your entry is deciphered as a date so tha app apply the default date format which is defined in the Preferenes Pane Date & Time.
To get rid of that, you must :
- define the cell as a text one
or
define it as date_time with the format :
date = day month
time = none
Yvan KOENIG (VALLAURIS, France) vendredi 9 septembre 2011 19:44:00
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

AudiMIDI Settings default

Similar Messages

Maybe you are looking for