Audio disappears when I use preloader

I have a movie that has an audio track (I have it set to "start" for the Sync). It works perfectly, but when I insert a preloader with it, the audio disappears. The rest of the movie still works fine (visual) but it is silent.  Couldn't find exactly this problem in a thread. Any ideas?

if you're using actionscript to instantiate your sound, use:
var yoursound:Sound = new Sound(this);
if you're using the timeline to instantiate your sound, make sure it's not set to export for use with actionscript.

Similar Messages

  • Background audio disappears when an interaction slide appears

    I have a (Captivate 6 produced) project which includes approx 40 slides and it looks to be running smoothly when published.
    However, I have imported a background music audio track which I want to play (and then loop) during the course of the whole course - however, whenever it reaches a slide which has an interaction on it, the music disappears and then returns when a non-interaction-based slide is reached.  Disappears again when the next slide is reached that contains an interaction, etc.
    I am unable to test in earlier versions of Captivate and so I am wondering whether this is an issue with this version of the program i.e. background audio disappears when an interaction slide is shown?

    We don't have the 6.1 update yet, but I did find a workaround for this (although it's not perfect).  With Captivate 6 there is now a "Play Audio" action that you can assign to the Slide Properties "On Enter" action.  When I did this, the narration continues to play even after the Flash interaction appears in the timeline.  So for any narrated slides that have Flash interactions, you need to:
    1) remove the Audio narration that is imported to the Slide (Audio > Remove > Slide from the menu bar)
    2) On the Slide Properties - On Enter action, select Play Audio, then select the appropriate narration file for that slide.
    This seemed to work -- the only problem is that if you use the "Play/Pause" button in the Adobe playback navigation bar, the button seems to get confused and changes to the Play state while the audio is still playing (instead of staying in the Pause state until the audio finishes as it does when the audio is imported to the Slide itself as narration).  Not sure how to fix that issue except to remove the Pause/Play button from the playbar and just use the Next/Back buttons.  And if you use navigation buttons instead of the Adobe playbar, you don't need to worry about this.
    Hope this helps!

  • Small black squares appear/disappear when I used the down key

    Small black squares appear/disappear when I used the down key-particulary when on FB, but also at other times

    No, there is no yellow star on any of the entries. Each entry has the site's (or company's) logo, as well as the name of the site and URL. There is nothing more in each entry.

  • Audio disappears when I reverse a video in iMovie 11?

    Hello.  I was reversing and mirroring videos today with no problems.  Then when I went to reverse another video, the video reversed fine, but the video's audio disappeared.  The audio plays perfectly fine when the video isn't reversed, so I'm not sure what the problem could be.  Like I said, I reversed other videos with no problems, so I know I'm doing it correctly.  I'm just wondering if there's a way to fix this.  Thanks.

    The iMovie forum is here
    https://discussions.apple.com/community/ilife/imovie
    That's where the knowledgeable ones on that issue hang out. Be sure to include the version of iMovie that you're using too.

  • Default  Transport controls disappears when i use separate windows

    The title is pretty clear. When i use separate windows for mixer and video, the transport controls disappears. (By the way, STP1 had a much better interface. Why one big closed window in STP 2?) How to have the transport controls back?

    This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. To simplify the test case, you could create a simple drag-and-drop ADF application without JHeadstart and see if the same problem occurs there. Try to access the session variable in a custom data action similar to the way JhsDataAction does it when applying the query bind params.
    If it reproduces, can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? Thanks.
    Hope this helps,
    Sandra Muller
    JHeadstart Team
    Oracle Consulting

  • Audio disappears when burning in iDVD 6 from QT movie (from FCP)

    Before burning, checked all the chapters and each plays with audio. When the disc burns it does encode the audio during the burning process but the only audio that is present when the burn if completed is the audio on the 1st menu. I only inserted video on menus two and three (using "Full Frame" menu) as I only want video; no audio on those two menus . I had to force quit twice and then ran Repair Permissions. Should have I trashed iDVD prefs and if so, is there only one to trash?
    thanks for any help . . .this forum is invaluable.

    I had to force quit twice and then ran Repair Permissions. Should have I trashed iDVD prefs and if so, is there only one to trash?
    drag and drop all incidents of the iDVD plist to the trash. Use the finder or spotlight to locate all incidents of plist for iDVD. Looks like this:
    com.apple.iDVD.plist
    secondly, you will need to repair permissions on the HD.
    applications > utilities > apple's DU
    third, delete all encoded assets from the advanced menu.
    forth, recommend using different media like Verbatim DVD-R Minus media and burn from a disc image using apple's DU or Toast at 4x or slower.
    fifth .....be very patient while it encodes and burns. i've seen some dvd's take up to 2 days.
    sixth ....make certain you have no less than 20GB of available HD space.
    Good luck!
    SDMacuser

  • Premiere cs4 exporting audio problem when I use desktop editing mode

    Hi.... I recently use a desktop editing mode when I create my new sequence ! I have a 480X270 16/9 ratio.... so when I export my sequence FLV in encoder... everything is ok for audio setting ... but when I put my movie on the Internet or just playback in adobe media player, I have no sound !!!! I don't know what is the problem....
    Thanks for help me !!!!

    Thanks for your quick respond and support !!!!!
    1- multiplexing = FLV
    2- audio default : codec mpeg layer III
    3 - i'm on pc
    4 - I use a jcplayer for my website and in local playback i use adobe media player
    I think that everything was ok in audio setting if i see my setting, but when i use a default sequence setting and I export I have sound.... when i use desktop sequence setting i lost my sound when i export !!!!!!
    is very strange !!!!
    Thanks again

  • Having audio problems when I use Facetime, any ideas?

    When I use Facetime on my 4S, the video shows & I can hear the person on the call but they cannot hear me!

    try rebooting
    hold down the home and power buttons untill the apple appears

  • Audio disappears when using video fx

    Two questions
    1) The audio track (purple line) disappears whenever I try to use any video effect.
    When I undo the video effect, the audio returns. What is the problem?
    2) Even though I have checked View . Show audio wave form. It just remains
    a thin purple line in the Timeline.
    How come it never changes. Could it all be related to the first question?
    I really need to darken a couple of clips , but I can't seem to do it without losing the sound. Thanks for any help.

    Hi
    *Not knowing the origin to Your problem - General approach when in trouble is as follows.*
    • *Delete iMovie pref file* - or rather start a new user/account - log into this and re-try
    iMovie pref file resides.
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named. com.apple.iMovie.plist
    While iMovie is NOT RUNNING - move this file out to desk-top.
    Now restart iMovie.
    • *Free space* on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Hard disk is untidy. *Repair Permissions*, Repair Hard disk (Apple Disc Util tool)
    • Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
    • Third party Plug-Ins that doesn't work OK (not relevant for iMovie’08 or 09)
    iMovie updated ?
    QuickTime updated ?
    Mac OS version ?
    • Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
    • Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Screen must be set to Million-colors
    From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
    Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
    there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
    iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
    to my Sony camcorders worked properly as it did before.
    Lennart Thelander
    I run "Cache Out X", clear out all caches and restarts the Mac.
    Yours Bengt W

  • Audio Sync when Exporting Using Compressor

    Hello!
    Having an odd situation. Project in FCP 4.5 the audio is sync'd just fine in FCP export using Compressor and the audio is delayed about 5 seconds...so the video footage starts and about 5 seconds later the audio starts. Now, in the same project I have other footage and exported the same exact way without issues - I have no idea why this particular footage would be an issue! Because Compressor is exporting these files with the audio and video as separate files I am seeing this issue when the file is in DVD Studio Pro - but again none of the other files that are being placed on this DVD are having audio alignment issues...so this is not making sense.
    I am not 'new' at this but I am no expert either - my main gig is audio - so I could really use some help.
    Any suggestions? I am not sure what other information someone would need to help so ask away.
    Thanks in advance!

    Well I REALLY need some help with this one! I have tried so many different 'work arounds' without success. As mentioned in my first post the audio is not sync'ing with the video when exported. I have tried Exporting the file in QuickTime, I have tried using Compressor again exporting just the video then the audio - pulling it into a new session and lining it up again but everytime I pull it the newly exported file into a new project and render it FCP crashes not allowing it to render (nice!). I actually started from square one capturing the video footage again and assemble the project again without luck. I simply cannot believe what a pain in the arse this is!! I need to get this project done and it simply won't do it.
    Where are my blood pressure pills????

  • Loop audio disappears when dropped into timeline

    When I preview a loop, it sounds great. When I drag & drop into the timeline, the loop no longer has any sound. Any suggestions?

    You dragged it into the empty area of the timeline, right?
    It sounds like you don't have the instrument that this loop uses (the preview is always an audio file, while the loop itself plays on GB's software instruments). What instrument is that supposed to be? Can you create a new software instrument track and use that instrument?

  • AAC Audio disappears when rendering iPhone screen capture

    I recorded some gameplay footage using Yosemite's Quicktime Movie Recording feature.  The audio is there when I play the quicktime, but when I drop it into Final Cut Pro 7, it wants to render the audio.  I render it, but the audio is gone.  Any way to have it convert the audio?
    Thanks
    Bob

    I'm sorry, but that just isn't true in my experience.  FCP7 works fine for me with h264.  Maybe if you need it to be super high-quality you have to use Pro-Res, I don't know.  But I edit with h264 in FCP7 all the time, I have for years.  It is great for editing little iPhone app demo videos.  And the files are sooooo much smaller.
    There is something else at issue. I think a recent Yosemite update must have broken something.  I got it to work simply by opening the new files in Quicktime Player 7 and saving them back out.  No conversion.  I don't even have to save it as a copy, just 'Save' on the original file!  So funny. They work fine now in FCP 7.
    Thanks for your reply anyway.

  • Airport signal disappears when I use our cordless phone

    Hi. I am running an adelphia premiere high-speed DSL modem into an airport extreme base station, which provides a wireless signal to an i-book and powerbook. I am also running a line from the extreme base station to a Vonage unit, for internet telephone, from which I use a cordless panasonic phone (KX-TG2216). It's a new set-up as we have just moved house. And I'm finding that whenever I use the cordless phone my airport signal disappears (icon goes to grey), and sometimes I even lose my base station network in the popup menu (necessitating finding it again on airport setup assistant). They're just not there... But they come back when I terminate any use of the cordless handset. Is it a hardware compatibility issue? Do I need some kind of firmware patch?
    Any help gratefully received. Thanks!

    simonherb, Welcome to the discussion area!
    Your cordless phone uses the same 2.4 GHz that is used by the AirPort Extreme base station (AEBS). Therefore it is directly interfering with your wireless network.
    You may be able to configure the AEBS to use a channel that works OK even when the telephone is in use.
    A better solution is to get a cordless phone that does not operate at 2.4 GHz.

  • Audio disappears when connecting/disconnecting headphones

    After I upgraded to IOS7 I noticed that often when I listen to Podcasts through the speaker and then connect my headphones or vice versa, the audio stops even though the podcast is still playing. In order to solve this, I have to change the podcast I'm listending to. Then the audio returns and then I can return to the original podcast. This doesn't happen every time, but often enough.
    I just upgraded to V2.0 and the problem is still there.
    Does anyone else have this problem? Any suggestions as to how to solve it?
    Thanks.

    Sometimes after a wait of a minute or two it starts up for me. When I open the app and watch the progress bar that shows how far along you are in the episode, it jumps back a ways when you plug in the headphones. The moment you touch the selector to drag it back to where you were, the audio resumes.

  • Photo Albums & Photos Disappear when publishing using ftp

    Hi,
    I am having trouble with both my iweb sites photos. There is two main problems:
    1. An album that appears normally in iweb is not visable on the published site
    2. An album will have random photos that are missing and replaced with a blank on the published site
    Some things I have tried:
    - I publish via ftp, so I tried publishing to a local folder - The albums and photos work normally
    - I tried republishing with a 3rd party cyperduck - same problem
    - I thought maybe it was therefore a ftp problem. So I logged in to my hostings file manager and check if the files are actually on the server -  but they are..
    - I tried republishing the entire site - same problem
    An example can be seen on the following - the third album is completely missing and if you go into the other albums, there will be random gaps where other photos are missing.
    http://www.gippmed.com/My_Albums/My_Albums.html
    Similar problem on this site, on the USA album, there is two photos missing towards the bottom:
    http://www.lukecainshooting.com/Luke_Cain/Photo_Gallery/Pages/USA.html
    Any help or suggestions would be greatly appreciated.
    Thank you

    Hi Cyclosaurus,
    Thank you for your reply. Sorry to bug you again but can I ask some further questions? Pls excuse my lack of knowledge on these things.
    In relation to your points:
    1) In the ftp publishing settings, public_html is acutal in where it says "site name", where it says "URL" I have http://www.gippmed.com. I was advised to put public_html in "site name" from my hosting. If I put anything else it publishes the entire site to a folder with that name on the server and is not viewable online?
    2) I have removed the spaces in the album page name and will reupload soon. In relation to the image file names, am I correct in saying that iweb is naming them from the captions? Do you really have to use one word captions or use underscores, it looks a little odd? I have read troubleshooting articles about iweb and spaces and it also recommends similar as you are, suggesting that all page names should have underscore instead of spaces. Problem is, if for example I change the page name "About Me" to "About_Me" iweb automatically changes it in the navigation menu and this looks silly to have undescores in the Nav Menu. Is there a way around this?
    Lastly, a new problem that I have never had before:
    Previously, iweb would remember what I had published and only publish new site changes. Now, every time I turn my computer off and on, I open iweb and it doesn't recognise any of the previous publishing, ie it republishes the entire site.
    Thank you again for your help

Maybe you are looking for