Audio lag in video while on Terminal Server

Hi Everyone,
We are having an issue with audio being out of sync when viewing flash video on a terminal server. The terminal server is running Windows 2008r2. The audio seems to lag behind the video by about 1 sec. We are planning to rollout training videos
and about half our users are on Terminal servers.
Here are some of the things we tried:
http://blogs.msdn.com/b/rds/archive/2009/05/11/what-s-new-in-remote-audio-for-windows-7.aspx?PageIndex=2#comments
On the server policy:
Computer Configuration ? Administratrative Templates ? Windows Components ? Remote Desktop Dession Host ? Device and Resource Redirection ? Limit Audio Playback Quality (Enabled, Audio Quality: Medium)
In the RDP file add a line that says:
audioqualitymode:i:1
thanks...
Mark

Hi Mark,
Thank you for posting in Windows Server Forum.
Can you please check which version of RDP client installed on your system? For better feature suggest you to install RDP 8.1.
Remote Desktop Protocol 8.1 Update for Windows 7 SP1 released to web
http://blogs.msdn.com/b/rds/archive/2013/11/12/remote-desktop-protocol-8-1-update-for-windows-7-sp1-released-to-web.aspx
Meanwhile go through beneath article for information.
Multimedia Redirection Improvements in Windows 7 and WS2008 R2 – Part 1
http://blogs.msdn.com/b/rds/archive/2009/07/24/multimedia-redirection-improvements-in-windows-7-and-ws2008-r2-part-1.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

How to add audio from a video while recording.

Hi,
I want captivate to recognize the audio of the video when recording a video demo. I know that it is possible in captivate 6.1 but not sure how. It sounds lame but I am a beginner.

Hi there,
Welcome to Adobe Forums.
You can do this by selecting the System Audio option on the recording window. Please refer to the below image:
Hope this helps!
Thanks!

Print Dialog Box for Addon is not showing in Terminal Server

Dear All,
I have created a addon for Automatic Sales Invoice printing that prints the crystal report directly to the printer bu opening a
print dialog box for printer selection through SDK code.
The Same addon works fine on the server with print dialog box being showing through SDK code.
But while running on Terminal Server , print dialog box is not showing any printer though printers are redirected to that
terminal server.I am not getting whether the problem is in my addon or in the terminal server printer settings.
Please suggest as i need to know the reason urgently.
Thanks
Amit

Hello Edward,
Thanks for your reply .
But the problem is that while running on normal server the print dialog box appear with the printer name in my addon for printer selection .
But while using terminal server , the print dialog box is not getting any printer in the dialog box .That's the major concern for me
is their any way to check that why the printers are not showing in print dialog box.
Thanks ,
Amit

Terminal server does not have any installed licenses

Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
“The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
Product version: Windows Server 2008 or Windows Server 2008 R2
Licensing mode: Per User
License type: RDS CALs”
So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.

Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server. If the license server has installed licenses of the other mode, changing the licensing mode
for the terminal server may also resolve the issue.
To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command.
To change the licensing mode on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
Please refer below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
Please check computability matrix.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

IPod bluetooth audio lagging video?

Hi,
I'm new to Bluetooth. I have an iPod Classic 160GB with Motorola S9 head set and Sony TMR-BT8iP Transmitter for the iPod. I like the set up except that when playing videos there seems to be a short lag in the audio signal that is not there with cabled head phones. Is this inherent with Bluetooth or is it one of the components not functioning properly?
Any suggestions or insights appreciated.
Regards,
EddieZ
Austin, TX
Message was edited by: EddieZ

I also experience this problem and watch a lot of video while traveling. Right now I keep my Sony DRBT50 in my drawer and use a corded headset because I can not deal with the delay.
I was planning on getting an iPad to get a bigger screen for video for my travels, but will probably hold off until this problem is fixed. I imagine it will be a problem there as well.
If anyone else is having the lag problem, please post so Apple can see its an issue that is important to us. I am actually disappointed that the post that tparry refers to was archived.

Exporting (in H.264 format in HD 720p 23.976 preset) and audio comes out separate while video file is a .m4v instead of .mp4

Using Premier Pro CC 2014.
Exporting (in H.264 format in HD 720p 23.976 preset) and audio comes out separate while video file is a .m4v instead of .mp4.
Anybody know why audio and video are exporting separately? I can't figure out why. Help is much appreciated.

Thank you for the quick response. Unfortunately, that doesn't fix it.
I have the same issue when I try to export it through Adobe Media Encoder. I even tried to go through using After Effects and export through Adobe Media Encoder with the same results. I'm wondering if I might be better off uninstalling then reinstalling all my adobe programs.

Capture video while playing audio in WP8 or WP81

Hi,
Whenever I try to record a video using the CaptureSource it stops whatever audio was playing. How do I prevent recording video from stopping the audio being played?
Thank you

Hi Baracat,
Could you explain any scenario why you want to capture the video while playing the audio? You want to record the audio played from your device to your video?
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Quicktime Re: Audio Lagging When Watching Videos

I have a Gatway NV53A laptop, I'm using Windows 7, and I have the latest version of Quicktime.
The problem is, when I watch videos the audio lags. The only way I can describe the situation is by this:
(Video shows person speaking)
(5 seconds later - you can hear what the person just said 5 seconds ago)
Has this happened to anybody? If so, could someone please help me. I'd appreciate it.

Hello jksilva92,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Best of luck,
Mario

Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted. The only problem is with Lollipop.
PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
The audio file formats which fail to stream are: mp3 and wav
The video file formats which fail to stream are: mp4, avi and 3gp
JPEG Images appear to work fine, but I haven't tried other formats.
I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
Any ideas?

Hi juicespeare1,
Welcome to the Sony Community!
Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
If my post answers your question, please mark it as "Accept as Solution"

How to bring up mulitpe connections through a terminal server

Ok, I have never been able to figure this out. I have a Cisco 2511 terminal server. Is there a way when using SecureCRT to bring up multiply devices going through the terminal server. What i keep doing is ctrl-shft-6-x but that's only going to be displayed on the same terminal window. I want to have multipe tabs open to the other devices. Other then putting a IP on all the devices and not using the terminal server while telneting I just can't seam to find a way. On videos like CBT nugget he goes through multipe tabs for his devices. I figued there has to be a way.

I believe that this approach should work:
- open a session with SecureCRT.
- telnet to the term server.
- use the term server to open a console session to one device.
- open a new tab in SecureCRT.
- in the new tabl telnet to the term server.
- use the term server to open a console session to another device.
- open a new tab in SecureCRT.
- in the new tab telnet to the term server.
- use the term server to open a console session to another device.
This approach should work up to the max number of vty that are configured. By default that would be 5. You may be able to configure additional vty and if so you should be able to have additional sessions to additional devices.
HTH
Rick

Terminal server limiting CUPC connections to 10

I recently setup a new terminal server in our VM to replace an existing older server running 2008 Enterprise. It is using CUPC 7.1. the new server 2008 R2 Datacenter. It has CUPC 8.6 which matches the current version on Call Manager. After moving new users to the new server I discovered that the CUPC quit working after 10 connections. The app flashes on the screen for a second and quits. I don't have any issues on the old server and checked all the licenses to verify we are covered. What can I do? Please help! Thanks

So, WTS is not a supported environment. The closest the CUPC client ever got to this was:
Virtual Desktop Infrastructure (VDI) SupportCisco Unified Personal Communicator Release 8.5(5) and later is supported on the following hosted virtual desktop applications:•VMware View 4.5•Citrix XenDesktop 4.0 Note In a virtualized desktop environment, full audio and video capabilities are only available on Cisco Unified Personal Communicator when you are using the desk phone for phone calls. If you are using the phone on your computer, only the voicemail features are supported in a virtualized environment.
Secondly, CUPC was a massive Java-breathing, DirectX-dependant resource hog. Even if it did work, it would be silly to run on a Terminal Server because of how much overhead it would add. Thankfully Cisco scrapped the code base and rebuilt it off of C# (or C-something). The VDI solution support has expanded but still does not include WTS.
It's difficult for us to provide guidence when you're off the path well travelled. Maybe someone will chime in though..
Please remember to rate helpful responses and identify helpful or correct answers.

Audio ahead of video

Hi,
I work with low resolution video and graphics. I don't anticipate working with higher resolution at all, I am not going to buy a digital videocamera. I take pictures with my digital still camera at 640x480. My screen resolution is set for the lowest I can use iMovie with, 1024x768 (stretched). I capture video with an XLR8 USB device which feeds video from my tv/vcr/VHS camcorder. The driver is from InterView and I capture with either BTV or InterVew Capture. (See my separate thread on resolutions)
(I managed to get iMovie to show the video window at 641x480 but I will have to check each time if I want to be sure I am set right (although it doesn't really matter.) It would be nice if there was a setting that I could keep it at... Yes, I can try to leave the window at that setting but I would prefer it be kept as a preference.)
Some of the material I want to deal with is VHS video, video from the tv, webcam video that I have laid off onto VHS. I want to edit and put that stuff on DVD. I have have figured out how to do most of what I want to do (and it looks fine when played back on the tv which is all I am asking for) but here is a problem I am not sure hot to work around:
The audio is ahead of the video. I feed the audio from my tv to my stereo and from there it goes into the computer. It ends up pretty close. I didn't notice it until I started using iMovie and iDVD; I've captured lots of video before on an older machine. Help in iMovie says I should "extract the video", save the project to Quicktime and see if that helps. Isn't that just incase the problem is a Quicktime bug or something? In my situation, as far as I can tell, the reason the audio is out of sync with the video is that the video is going in via a USB 1 device and the audio is getting into the computer faster via the audio-in port. While capturing (with BTV or InterView Capture) there is a bit of a delay anyway, the audio and video are behind what I am seeing on the tv. It never really bothered me before but it is much more noticeable now when I look at the results (It's not noticeable during the capture.)
I could try to select the audio track (after extracting it)and try to noodge it to the right spot (using the arrow key?) but I am skeptical. It is so hard to cue with iMovie, trying to synchronize audio would be an exercise in futility. I might be able to noodge it to the right of left by using the arrow key but it will be real hard to tell if it is synched up.
Which brings me to another problem. The only way I have ever been able to see waveforms is by extracting audio. Shouldn't I be able to see them by just checking the menu item Show Audio Waveforms? It never showed them until I extracted them into their own separate track. (One other feature I would LOVE to see is being able to hear the audio at various speeds. I would be able cue/synchronize much better being to hear when something starts. Better movement controls would help me alot too.)
Does anyone have any ideas on how I can make sure my audio is in sync in the future? My XLR8 device does not have an audio input which, I think, would solve it.
Thanks.
John L

OK. Here is what I did for this round which wasn't successful (was still out of sync) but I wanted to try it anyway. At one point when I looked at the iDVD preview some of it actually seemed to be in sync.
Back to the beginning. I set iMove to 640x480. I get those numbers in yellow on the screen. (I had set the screen to 640x480 once before. It did not remember that when I started up iMovie...) I hope those numbers go away; they're sticking around...
I check the source files and the audio is good there. In sync. They are InterView Exported from the original QT format to .dv to get rid of InterView's encoding which supposedly prevents people without it from seeing the video (but I have never noticed that it made any difference. It does fix the 16x9 aspect ratio problem I noted in an earlier thread though so I do it.)
I import/save as MPEG-4. Importing slows down on the last two clips. It says it will be done in 23 minutes for a long time. Tabbing between a few other open apps seems to encourage it to speed up... I check Activity Monitor and there are no stalled processes. OK.
I have 13 GB available. I know I should have more but unless it gives me an error message I will attempt to go with what I have. (I did throw out all earlier versions of iMovie and iDVD files.)
OK, It's done importing. The 640x480 lettering has gone away, thank you. Now I will edit each clip separately. I think it will be easier that way. Hopefully putting them back on the clip tray(?) after I I'm done won't be a problem.
I check, the audio is NOT in sync but I will try to fix that with the suggestions from the link above, before I export to iDVD.
Trying to edit is very difficult. All I want to do is just cut some of the beginning and ends off of these clips. Sometimes I get a vertical bar with the arrow facing in, sometimes I don't. Also, sometimes it shows me the whole clip as being selected, sometimes it only shows from the beginning to a little past the playhead marker. Very weird (but alas, not surprising). Saving and quitting and restarting iMovie does not help. Eventually the vertical bars appear when needed and I move on. (I assume all I have to do is move that bar to the where I have left the playhead. That seems to work most of the time. I bookmarked certain points as well and dragged the vertical bars to those points and if it did what I wanted, I moved on. Sometimes weirder things happened but I can't describe them.
Now to put all the clips on the timeline and see if I can sync up the audio. I (Select all and) extract. The progress bars do their thing. I get a red bar under the first clip so I scroll to the right and eventually get all the of them done and proper waveforms. I extract. The audio is NOT in sync. OK. I try suggestion #3 (putting in one or two second gaps at chapter markers but have difficulty with that and give up. I don't have QT Pro so option #4 is out. Option #2 I discard since I want all my segments as one movie and as individual segments but I later realize I could do that anyway. My DVD would end up in slightly different format but it may be workable. I may try that if what I am doing now in iDVD doesn't work out. (I may just give up at this point too. It isn't worth the trouble...)
One reason I gave up with #3 was that I could not select all! I get the selected blue indication from the beginning and a little after the playhead but not after that. Other weirdness occurs...
I ignore that and put in chapter markers. I put in 4 for one clip and I see that the entire timeline is selected. Good.
I bring it into iDVD. (I suppose I should continue this thread in an iDVD message...) I'll just leave it here: things look out of sync in iDVD as I am encoding it. I doubt it will be fixed but I will let it run its course. I do have an earlier attempt which may be a little better/not bad.
OK. iDVD is all set up but the sync isn't any better. I just wanted to try it and see.
Maybe I'll try iMovie 3...
Thanks for your interest and all you help.
John

Problem with Photoshop hangs/freezing for users on a terminal server

Dear Forum!
I'm having some trouble with Photoshop freezing over a period of ~20 minutes when you (1.) user the eraser with special brushes and (2.) copy and paste material from a PDF to Photoshop. As you might notice by the size of this post i'm getting quite depserate over here and need some help.
A Little background information...
Photoshop CS6 is installed on a terminal server with ~25 Active users where 3 of them are using Photoshop.
The operating system on the server is Windows Server 2012 R2.
There are no additional add-ons just a plain installation of Photoshop in that matter.
The server uses 40-60% of the memory most of the time (mostly a bit less, some times a bit more but never 100%) and 40% of the CPU.
There's enough space free on the disc.
The problem in detail...
There are two occasions where the freezing has occured most of the time. After it hangs for the first time, it will happen everytime you do any of the operations over a period of ~20 minutes and it's Mutual for all users. When it freezes, the whole terminal session freezes but the program i still responding (it's not getting set to "not responding") when viewed from Another user through the task manager. Ending the process as an administrator sometimes work, although from the moment i end he proces it takes about 10-60 seconds Before the program actually Closes and the user gets back Control. The easiest thing to do most of the time is if an administrator forces them to log out.
1. The first occasion is when you use the eraser with a brush that's not standard but manually added. The names of the brush packages used are:
Extacy__Elemental
KKC_Fractal
Kornkid's_Grunge_Set
and the problem is with all brushes inside those packages. The way i evoke the problem is the following:
     1. Start Photoshop
     2. Create new
     3. Fill the background with any color
     4. Select the eraser tool
     5. Change the brush to one of the ones mentioned above
     6. Program freezes
2. The second scenario when the problem occurs is when the users copy something from a PDF to Photoshop. The way i evoke this is:
     1. Open a PDF
     2. Select area and copy it
     3. Open Photoshop
     4. Create new
     5. Paste into Photoshop
     6. Program freezes
Solutions we have tried so far...
I've been working on this for several round now and i'm not entirely sure on what exactly i have done. I will try and do the following solutions once more but i'm pretty sure that i have tried most of them.
Update graphic card drivers.
Resetting all Tools:
     1. Select options for a tool
     2. choose "Reset all Tools"
Resetting presets:
     1. Hold ctrl + shift + alt while Photoshop is starting
     2. select "yes"
Tested if it matters if i have a pen connected or not, which it doesn't.
Removed the special brushes (but it still freezes when copy/paste from PDF)
Removed "save in background" and "automatically save recovery information" options
Updated to latest version.
Turned off OpenGL
Solutions i haven't, but will try...
Reinstall Photoshop
Change font preview size
     1. Go to "type"
     2. select "Font prview size"
     3. select "none"
Delete system font cache
Close all Adobe applications including the Creative Cloud desktop app (if installed).
Navigate to \Windows\ServiceProfiles\LocalService\Appdata\Local
Delete the *FNTCACHE*.DAT or *FontCache*.dat files.
NOTE: The asterisk (*) indicates various numbers, letters, or words, such as FontCache-S-1-5-21.dat or COFFfntCache.dat.
Delete Photoshop font cache
Exit Photoshop and the Creative Cloud desktop app (if installed).
Navigate to the appropriate folder
Photoshop CS6 and earlier.
Windows XP: \Documents and Settings\Local Settings\Application Data\Adobe
Windows 7: \Users\[user name]\AppData\Local\Adobe
Photoshop CC and CC 2014
Windows 7 and 8: \Users\[user name]\AppData\Roaming\Adobe\Adobe Photoshop CC or CC 2014
     3. Delete the TypeSupport folder (Photoshop CS6 and earlier) or the CT Font Cache folder (Photoshop CC and CC 2014), and empty the trash.
Some links i have been using...
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html#troubleshoot
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

Hi Mylenium!
Thanks for your reply but since the users work on the terminal server via remote dektop the only data sent through the network is a "Picture" of what is happening on the server. All the operations are handled on and by the server and nothing is executed on the users local machine. Also all files are stored on the server therefore the load on the network is minimum.
We are not the first in the World to run this setup and i know that this is possible to do since i've read about others running PS like this.
Kind Regards,
J. Alm

Can Connect to PC AIM Users and Have Audio but No Video, But Worked Before!

Hi all,
I know this has been answered a thousand times in a thousand ways, but I still can't make it work. I purchased a MacBook with built-in iSight using OS X 10.4.11. For the first three months of use, I logged into AIM through iChat and was able to chat with any user using both audio and video with absolutely no problems whatsoever. Now, I can still connect to other users but they only receive audio from me and no video while I still have a video display at my end. In other cases, I can't connect whatsoever. I am not using a Firewall, so there should be not port issues. I have not once changed my settings from the time that they worked until now. Neither have my chatting companions (most of whom are on PCs, by the way). I am on the same ISP using the same modem.
I have tried every setting change in the book. I have deleted the preferences file. I've opened up ports when I don't need to. I am completely, utterly at my wits end, since video chat is one of the few things that keeps me sane in a long distance relationship.
What's gone wrong?
Help? Please?
Erin

Hi,
Use this FAQ http://discussions.apple.com/thread.jspa?messageID=607640&#607640
Run Repair Permissions and then Run the Cron Scripts.
MacJanitor is free.
If Leopard run each (Daily, Weekly, monthly) indiviually.
10:27 PM Thursday; December 13, 2007

Video Lagging/Choppy videos on Macbook Pro

Hello,
I am having a problem while watching videos online: video lagging/choppy videos. Sometimes the video is stuck in a certain frame although I still have the sound on the background; sometimes the video slows down completely (frame+sound). It started around one month ago, and exists in several different websites, I couldn`t solve it by myself. I am not very good with computers. I tried to uninstall/reinstall flash player, as well as disable hardware acceleration, and the problem is still there. Also somedays the videos are working fine, and somedays they are all bad independent of websites. I tried to use different browsers (chrome/firefox/safari), but the problem persists.
I am using a Macbook Pro and bought it in the beginning of January this year (right now it is running OS X 10.7.4) with flash player version 11.2.202.235.
I would very much appreciate if you can help me.
Thanks.

mellskucukoglu, uninstall all adobe products then install Adobe Flash Player, Adobe Reader, Adobe Air, Adobe Shockwave Player. Make sure to select the operating system correctly behind the link. Turn off your antivirus till you finish installation as suggested below the webpage. If it still doesn't work check for OS X 10.7.4 updates.
If it still doesn't work then go for Adobe Live chat in this link http://www.adobe.com/support/chat/ivrchat.html . Sometimes they are busy. If they can't help. Think about any changes that you made before this issue like installaling any new apps. Uninstall them. If it still doesn't work then install Adobe Flash Professional CS 6. After installing check for adobe updates and update them all. It should work at this point. If not ,watch this
http://www.youtube.com/watch?v=C7YUs95jdQk
http://www.youtube.com/watch?v=2v8bBX1s1sY
http://www.youtube.com/watch?v=9dBO5Wz4bsg
http://www.youtube.com/watch?v=Sc0uQsHMyCU
http://www.youtube.com/watch?v=WQQKnUEbhrM
http://www.youtube.com/watch?v=MP2I0Hfy1Cg&feature=related
http://www.youtube.com/watch?v=iE1yKm-v87g
If the issue persists switch to Windows XP SP3 or Windows 7.

Audio lag in video while on Terminal Server

Similar Messages

Maybe you are looking for