Audio nearly non-existant when overdubbing- controls?

I'm overdubbing using a decent microphone in the mic input on the back of the case. I've tried everything suggested in help to bring the input volume up, but nothing works. I can hear the sound track if I bring all volume controls up to full, so it is recording. I get no sound wave visuals in the audio rail. Suggestions?

meyersburg wrote:
OK, I understand what you're recommending, but why should this be necessary. I haven't come across any references suggesting this tack. Would you be more spec ific, please. Thanks- meyersburg
.. hm, well, as said: line-in is technical something completely different than a mic-in..
a line-in can be found at any HiFi gear, as amplifiers, tuners, cassette recorders or VHScorders, camcorders..
a mic offers just a tiny fraction of 'voltage' compared to those devices ...
connecting a low-out-put source as your mic (or, if you remember those devices: a turntable player) to a line-in has the effect, you're discribing..
connecting a high-level output device as a cassette player to some mic-in can 'fry' that input...
don't hesitate to wiki on your own ....

Similar Messages

Audio won't play when QT controls are hidden once published

If you go to www.thegravystreet.com you will see a bunch of colored dots which are all QT's (audio only) with the controls hidden. Only one at the top has the controls showing and this works fine. But the rest don't work at all. It says in the iWeb help that if you hide the QT controls you can play the QT by double clicking but this doesn't seem to work for me.
Could someone please check this out and tell me if I'm going mad or if there is some problem with the way I'm trying to do this. BTW these are mp3's i just dragged into iWeb and the colored dots are just graphics i dragged onto the QT placeholder directly above the controller. I then removed the controller in the QT settings in the inspector.
Any advice would be appreciated.
Thanx,
Mark

Mark:
Welcome to the Apple Discussions. Have you tired using the File->Publish All to MobileMe menu option. Often that will jump start stubborn links, etc.
I do have a question. If you get it to work how are you going to let the visitors know to click on one of the dots to play the associated audio track?
Just tried a test of that and it didn't work for me either.
Message was edited by: Old Toad

PO E-Mail Out Put Error ( E-mail address incorrect or non-existent )

Hi Gurus,
I'M getting the error " E-mail address incorrect or non-existent" when i process the out put type for email of PO.
I maintained all the settings which are mentioned below ,
Goto NACE .
u2022 Select EF and click on OUTPUT TYPES.
u2022 Then select Output Type NEU and click on processing routines .
u2022 In that you have to add a new entry - medium 5 .
u2022 Then you need to assign a program, form routine and form.
u2022 You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
u2022 Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
u2022 For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
u2022 Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE .
u2022 You need to maintain your email id in tcode SU01 and also the vendor's email id.
u2022 Now while creating a new purchase order , change the medium to External Send .
u2022 Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
u2022 Goto tcode ME9F .
u2022 Execute.
Still I'm getting the same error " E-mail address incorrect or non-existent". could any body help me in this issue?
Regards,
Sri.........

Hi Deepak
I have gone through the notes which u have mentioned, but it is not helping to my query,
I had maintained SMTP port in the tcode SCOT.Then I'm getting the message "MAIl request 000000000002 created" when I run tcode ME9F for email out put.But I'm not getting the out put in the email address which I specified in the vendor master record. I can see one error in the transaction code SCOT. should i run transaction SCOT manually every time ?
Regards,
Sri...........

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls. Help?

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.) Help?

Try this fix posted by Robinson Collins:
Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

HT5616 I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account. However, apple was able to bill me for my non-existent iCloud account. How does that happen?

I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account. However, apple was able to bill me for my non-existent iCloud account. How does that happen?

If you didn't create an iCloud account on an iOS device or Mac, you don't have one. You can't create an account on a PC. If you were charged for an iCloud storage upgrade without having an account, contact the Apple online store at the bottom of this page for a refund.

Extra monitor w/laptop in office, when out of office how do I prevent Firefox from displaying on the non-existant 2nd screen?

When I am out of my office using my laptop, upon launching Firefox, it displays all of the tabs from the previous session on the non-existent extra monitor which is set up as a screen extention for when I am in my office. All of the other programs that I park on the extra monitor (Outlook for example) display on the laptop's screen when the extra monitor is not attached. Is this a bug? Or, must I not save my open tabs when exiting Firefox if I am going to use the laptop w/o the monitor?

Thanks for your suggestion. I sort of came to that conclusion as I was typing the original question. However if there is anyone out there who has a solution that is not dependent on my remembering to do something before I exit Firefox, it will be welcomed.

NI Elvis throwing error 7, NI 488: Non existent board, NI Elvis traditional throwing error 2, NI 488: Write detects no Listeners when attempting to launch labview

I wrote a program on a laptop in our lab that used both the NI Elvis power supplies and DMM. On the laptops in the lab, which connected to NI Elvis through a board in the NI-PXIe device the program worked perfectly both as a vi and as an executable. The program needed to be put on some computers in another lab for student use with a different version of labview, and everything worked except for the variable power supplies. I activated debugging and it reported Error 7 at New File, NI 488: Non-Existent Board. After attempting to trouble shoot this and not finding any helpful results I attempted to rewrite the program on the computers directly, since I could only put the program on the computers as an executable since it was written in 8.6 and the computers only have 8.0 and 8.2. To begin I was going to launch labview from NI Elvis to use one of the example codes as a base for my program. When attempting to do this I got Error 2 with the possible causes being Labview memory full and NI 488: Write detected no listeners. My question is are the two errors related, and how can I fix these errors? All the NI Elvis software is 2.0, the original program was written in Labview 8.6, the computers have Labview 8.0 and 8.2 on them. The NI Elvis devices are connected directly through the computers, rather than through another device, I'm not sure if this might be causing some obscure hardware issue.

Hello Chris,
It looks like this error is associated with not having administrator privileges. Take a look at this other forum post for more information:
http://forums.ni.com/t5/Academic-Hardware-Products-NI/Error-2-when-starting-LabVIEW-from-ELVIS-Instr...
If you can log in as an administrator you should be able to avoid getting error 2 when you launch LabVIEW from NI Elvis. Alternatively, you can upgrade to NI-ELVIS 3.0, because the issue is fixed in that version of NI-ELVIS. You can find this by going to ni.com/support and searching for "NI-ELVIS 3.0"
Colden

One of my audio books will not play. My music plays. And my other audio book plays. When I try a listen "the singularity is near", It does nothing. I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning.

One of my audio books will not play. My music plays. And my other audio book plays. When I try a listen "the singularity is near", It does nothing. I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning, and still does play. How do you report a problem with a mandatory apple app?

Audiobooks purchased from Audible.com. They play on iTunes on my computer. They have been playing on my iPod Classic until two days ago. I'm in the middle of two books and now one does not keep track of where I am and the other does not play. I also have other books not playing on the iPod that use to play. They all play on iTunes on my computer.

When trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

when trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
You will need a minimum of 10-12 GBs of free space to install Yosemite, however, that is a bare minimum and should be at least twice that amount.

How do I restore my iPhone 4s when it asks to put in a password for a non existent iCloud account?

how do I restore my iPhone 4s when it is asking me to sign into a non existant iCloud account?

Do you have a second hand device and the Activation Lock has not been removed by the previous owner?
Check the status of the Activation Lock on your computer by using this link: icloud.com/activationlock
If the Activation Lock is still active and this is not one of your Apple ID's, if you are using more than one, contact the previous owner to have the Activation Lock removed:
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. Learn how to remove a device from a previous owner's account.
copied from Find My iPhone Activation Lock

Exchange 2007 when sending a calendar invite, a non-existent delegate shows up in an undeliverable message

I had a test user that was removed. When it was removed, it was still listed as a delegate on someone's email. Now, whenever a Calendar invite is sent to the existing user, the sender receives an undeliverable message. The existing user does not receive
notification of a calendar event, but the event does show up in the calendar.

Hi,
If the delegate user account or mailbox has been removed from domain or Exchange server, please also remove the delegate settings with this account.
If a user is set as a delegate for a manager, the meeting request which is send to the Manager would be forwarded to the delegate automatically and ask for approving in the delegate side.
Please do the following steps in the Manager’s Outlook client to remove the delegate settings for this non-existent delegate:
1. Open the Manager’s Outlook.
2. Click File > Account Settings > Delegate Access.
3. In the Delegate list, click the non-existent delegate, click Remove.
4. Click OK to save the settings.
Then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

The audio on my flash player no longer works; audio on non-flash applications still works.

Overnight, the audio on my flash player stopped working. I am not sure when this happened or what caused it. The audio on non-flash items works just fine. I have tried all the troubleshooting solutions and none have fixed the problem. I even uninstalled and re-installed flash player. Flash player seems to be working correctly in all other aspects. I have tried other browsers, but the problem exists there, too. Have any ideas about what the problem could be? Thanks.

It won't going forward.
See: "Why can't I install Flash Player on my Tablet?" (Kindle or Samsung Galaxy)

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

My iPhone 5S prompts me for my password to an Apple ID email that no longer exists as an account. How do I change my Apple ID address without having to change the primary address to a non-existent email account?

I cannot sign into icloud on my phone because the Apple ID is an email account that has been deactivated and deleted. How can I change my Apple ID without having to change the primary email address to this non-existent account? If I did so, I wouldn't be able to access the account to receive the verification email. Please help!

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You should not need to verify the old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Usage tracking problem : not started due to non-existent Usage Tracking tab

Hello,
I need some help after following the necessary steps to setup 'Usage Tracking'.
My table S_NQ_ACCT stays empty.
The structure in the rpd files looks like
* OBI Usage Tracking
Connection Pool
Usage Tracking Writer Connection Pool
Catalog
dbo
S_NQ_ACCT
My nqsconfig has the following entries related to usage tracking
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = YES;
DIRECT_INSERT = YES;
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT";
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
When making queries on the Usage Tracking SA, I still receive the following error in the NQServer.log File
+[59049] Usage Tracking not started due to non-existent Usage Tracking table "<Database>"."<Catalog>"."<Schema>"."<Table>".+
What am I doing wrong??
Txs for your quick help on this!
Kr,
A.

Can you post your entire NQSConfig.INI file?
According to the message guide (http://download.oracle.com/docs/cd/E12103_01/books/AnyMsg/AnyMsg_Messages.html#wp1007961) the error you're getting specifies the table that OBIEE is trying to use, so the fact that yours reports literally "<Database>"."<Catalog>"."<Schema>"."<Table>" makes me think maybe the wrong config is being picked up. Also your comment that using a file instead of DB doesn't work either.

Audio nearly non-existant when overdubbing- controls?

Similar Messages

Maybe you are looking for